serialIfClock

The physical layer (layer 1) clocking mode.
When configured as AUTO the clock provided depends what is
configured on connector. If connector is configured as
DTE clock must provided from external, if the connector is
configured as DCE clock is generated and is provided at
the output pins.
It is possible to configure the clock independed from
connector type. EXTERNAL clock means the clock must provided
by the external device and INTERNAL clock means the clock
is generated by the brick and is provided on the output pins.
X.21      one clock line is provided.
V.35/V.36 two clock lines are provided.
auto(1)	connector = DTE = extern,
		            DCE = intern
extern(2)	clock pins operate as input.
intern(3)	clock pins operate as output.

MIB

BIANCA-BRICK-SERIAL-MIB

OID

.1.3.6.1.4.1.272.4.25.1.1.5

Type

column

Access

readwrite

Status

mandatory

Parent

serialIfEntry