atiswitchPortAutosenseOrHalfDuplex
AtiSwitch-MIB ·
.1.3.6.1.4.1.207.8.15.3.1.1.3
Object
column
r/w
Enumeration
This object allows an admin request to configure whether this port is set to autosense or one of the different speed/duplex combinations.
Context
- MIB
- AtiSwitch-MIB
- OID
.1.3.6.1.4.1.207.8.15.3.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atiswitchPortEntry
- Table
- atiswitchPortTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atiswitchPortNumber The object identifies the port of the switch. | column | Integer32 | .1.3.6.1.4.1.207.8.15.3.1.1.1 |
| atiswitchPortVlanTagPriorityConfig This per-port attribute allows the configuration of the
Tag Priority to be Override or use the Tag Priority. By
Default, all ports use Vlan Tag priority. | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.10 |
| atiswitchPortCOSPriorityConfig This per-port attribute allows the configuration of the
priority of the port. There are 8 priorities as per the
IEEE standard with 0 being the lowest priority and 7 the
highest. I… | column | Integer32 | .1.3.6.1.4.1.207.8.15.3.1.1.11 |
| atiswitchPortBroadcastConfig This per-port attribute determines if broadcast
packets received should be discarded or
processed. By default, they will be processed. | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.12 |
| atiswitchPortReset This per-port attribute resets the port to the
original default configuration.This can prove
useful in situations where a port is experiencing
a problem making a valid connecti… | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.13 |
| atiswitchPortName This attribute associates a user defined string name
with the port. | column | OctetString | .1.3.6.1.4.1.207.8.15.3.1.1.2 |
| atiswitchPortLinkState This attribute allows an admin request to read the
status of link state on this port. | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.4 |
| atiswitchPortDuplexStatus This object allows an admin request to read the status
of Duplex on this port. | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.5 |
| atiswitchPortSpeed This attribute allows an admin request to read the
speed of this port. | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.6 |
| atiswitchPortState This attribute allows an admin request to disable or
enable communications on this port. It also responds
with the status of the port. Except enabled(1) and
disabled(2), all va… | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.7 |
| atiswitchPortFlowControlConfig This per port attribute determines whether the port
has flow control enabled or not. By default, flow
control is disabled. | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.8 |
| atiswitchPortBackPressureConfig This per-port attribute describes whether the port
identified has Back Pressure Enabled or not.By
default, Back Pressure is Disabled. | column | Enumeration | .1.3.6.1.4.1.207.8.15.3.1.1.9 |