AtiSwitch-MIB Table View

This table contains the list of IP Addresses 
(management stations) to which SNMP Traps are sent.
The maximum number of entries in the table is 4.

atiswitchNwMgrEntry row .1.3.6.1.4.1.207.8.15.1.9.1.1

An entry of atiswitchNwMgrTable specifying each
management station to which a SNMP trap is sent.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchNwMgrIndex The index for the management station entry.	Integer32	.1.3.6.1.4.1.207.8.15.1.9.1.1.1
atiswitchNwMgrIpAddr The IP address of the management station.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.207.8.15.1.9.1.1.2

This table contains all the type of devices supported 
by this MIB.

atiswitchPortEntry row .1.3.6.1.4.1.207.8.15.3.1.1

The device type in the DeviceTable.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchPortNumber The object identifies the port of the switch.	Integer32	.1.3.6.1.4.1.207.8.15.3.1.1.1
atiswitchPortName This attribute associates a user defined string name with the port.	OctetStringr/w	.1.3.6.1.4.1.207.8.15.3.1.1.2
atiswitchPortAutosenseOrHalfDuplex This object allows an admin request to configure whether this port is set to autosense or one of the different speed/duplex combinations.	Enumerationr/w	.1.3.6.1.4.1.207.8.15.3.1.1.3
atiswitchPortLinkState This attribute allows an admin request to read the status of link state on this port.	Enumeration	.1.3.6.1.4.1.207.8.15.3.1.1.4
atiswitchPortDuplexStatus This object allows an admin request to read the status of Duplex on this port.	Enumeration	.1.3.6.1.4.1.207.8.15.3.1.1.5
atiswitchPortSpeed This attribute allows an admin request to read the speed of this port.	Enumeration	.1.3.6.1.4.1.207.8.15.3.1.1.6
atiswitchPortState This attribute allows an admin request to disable or enable communications on this port. It also responds with the status of the port. Except enabled(1) and disabled(2), all values are read-only status.	Enumerationr/w	.1.3.6.1.4.1.207.8.15.3.1.1.7
atiswitchPortFlowControlConfig This per port attribute determines whether the port has flow control enabled or not. By default, flow control is disabled.	Enumerationr/w	.1.3.6.1.4.1.207.8.15.3.1.1.8
atiswitchPortBackPressureConfig This per-port attribute describes whether the port identified has Back Pressure Enabled or not.By default, Back Pressure is Disabled.	Enumerationr/w	.1.3.6.1.4.1.207.8.15.3.1.1.9
atiswitchPortVlanTagPriorityConfig This per-port attribute allows the configuration of the Tag Priority to be Override or use the Tag Priority. By Default, all ports use Vlan Tag priority.	Enumerationr/w	.1.3.6.1.4.1.207.8.15.3.1.1.10
atiswitchPortCOSPriorityConfig This per-port attribute allows the configuration of the priority of the port. There are 8 priorities as per the IEEE standard with 0 being the lowest priority and 7 the highest. In a switch environment, ports with highe…	Integer32r/w	.1.3.6.1.4.1.207.8.15.3.1.1.11
atiswitchPortBroadcastConfig This per-port attribute determines if broadcast packets received should be discarded or processed. By default, they will be processed.	Enumerationr/w	.1.3.6.1.4.1.207.8.15.3.1.1.12
atiswitchPortReset This per-port attribute resets the port to the original default configuration.This can prove useful in situations where a port is experiencing a problem making a valid connection to the end node. Setting the value to…	Enumerationr/w	.1.3.6.1.4.1.207.8.15.3.1.1.13

Table of Virtual LANs configured in the switch.

atiswitchBasicVlanEntry row .1.3.6.1.4.1.207.8.15.4.1.1

An entry describing the configured Virtual LAN.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchBeVlanIndex Index of the Virtual LAN entry. Maximum number of Virtual LANs in 8024/8024GB is 32.	Integer32	.1.3.6.1.4.1.207.8.15.4.1.1.1
atiswitchBeVlanName Name of the Virtual LAN.	OctetStringr/w	.1.3.6.1.4.1.207.8.15.4.1.1.2
atiswitchBeVlanTagId VId of the Virtual LAN as stored in the tag information header in accordance with 802.1q specification.	Integer32r/w	.1.3.6.1.4.1.207.8.15.4.1.1.3
atiswitchBeVlanTaggedPortMask List of tagged ports in the Virtual LAN.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.207.8.15.4.1.1.4
atiswitchBeVlanUntaggedPortMask List of untagged ports in the Virtual LAN.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.207.8.15.4.1.1.5
atiswitchBeVlanMirrorPort Port number on which all Virtual LAN traffic is mirrored on. By default the value is 0 indicating no port mirroring.	Integer32r/w	.1.3.6.1.4.1.207.8.15.4.1.1.6
atiswitchBeVlanRowStatus Indicates the status of this entry. This object is used to create, modify or delete Virtual LAN entries as per the RowStatus specification of SMIv2. There are two ways to create a Virtual LAN entry - CreateAndGo (Us…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.207.8.15.4.1.1.7

Table of per port Virtual LAN configuration.

atiswitchPort2VlanEntry row .1.3.6.1.4.1.207.8.15.4.2.1

An entry in the table, containing per port Virtual LAN
information.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchPvPortNumber This object identifies the port on the switch.	Integer32	.1.3.6.1.4.1.207.8.15.4.2.1.1
atiswitchPvVlanName This object identifies the Virtual LAN name to which the port belongs to.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.207.8.15.4.2.1.2

A list of statistics entry for each port.

atiswitchEthPortMonEntry row .1.3.6.1.4.1.207.8.15.6.1.1.1

A colletion of statistics kept for a particular port.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchEthPortMonId Port number.	Integer32	.1.3.6.1.4.1.207.8.15.6.1.1.1.1
atiswitchEthPortMonRxGoodFrames The total number of good frames received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.2
atiswitchEthPortMonTxGoodFrames The total number of good frames transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.3
atiswitchEthPortMonTxTotalBytes The total number of bytes transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.4
atiswitchEthPortMonTxDeferred This is the count of first time Transmission attempt which failed on an interface due to medium being busy.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.5
atiswitchEthPortMonTxCollisions The total number of collisions while switching on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.6
atiswitchEthPortMonTxBroadcastFrames The total number of broadcast frames transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.7
atiswitchEthPortMonTxMulticastFrames The total number of multicast frames transmitted from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.8
atiswitchEthPortMonRxOverruns The total number of over sized frames received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.1.1.1.9

A list of statistics entries.

atiswitchEthPortErrorEntry row .1.3.6.1.4.1.207.8.15.6.2.1.1

A collection of statistics kept for a particular port.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchEthPortErrorId Port number.	Integer32	.1.3.6.1.4.1.207.8.15.6.2.1.1.1
atiswitchEthPortErrorRxBadFrames Total number of bad Frames received on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.2.1.1.2
atiswitchEthPortErrorTxTotal Total number of errors resulting from transmit operations.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.207.8.15.6.2.1.1.3

This table associates MAC addresses (as stored in the 
forwarding table of the switch) to the Virtual LAN to 
which it belongs.

atiswitchFwdVlanEntry row .1.3.6.1.4.1.207.8.15.7.1.1

Entry in the atiswitchFwdVlanTable.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchFwdVlanMACAddr A MAC address from the forwarding table of the switch.	MACAddress Type Constraints: range: 6	.1.3.6.1.4.1.207.8.15.7.1.1.1
atiswitchFwdVlanVlanId The Virtual LAN to which atiswitchFwdVlanMACAddr belongs to.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.15.7.1.1.2
atiswitchFwdVlanAge Current age of the MAC Address in the forwarding table - 0 indicates it is still active, 1 indicates that the address has aged out.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.15.7.1.1.3
atiswitchFwdVlanStatus Status of the MAC address - inactive (1): It is no longer valid e.g, it was learned and has since aged out, but has not yet been flushed from the table, active (2): Learned or statically assigned and currently in us…	Enumeration	.1.3.6.1.4.1.207.8.15.7.1.1.4
atiswitchFwdVlanPort Either the value 0, or the port number of the port on which a frame having a source address equal to the atiswitchFwdVlanMACAddr has been seen. A value of 0 indicates that the port number has not been learned but th…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.207.8.15.7.1.1.5

This tables lists MAC addresses lexicographically from 
the static table which binds MAC address to ports on 
the switch.

atiswitchStaticMACEntry row .1.3.6.1.4.1.207.8.15.8.1.1

Entry in the atiswitchStaticMACTable.

Indexes

No indexes recorded

Column	Syntax	OID
atiswitchStaticMACAddress This object identifies the MAC address associated with Static MAC table.	MACAddressr/w Type Constraints: range: 6	.1.3.6.1.4.1.207.8.15.8.1.1.1
atiswitchStaticMACPortNumber This object identifies the port for which the MAC address is associated statically in the MAC Table.	Integer32r/w	.1.3.6.1.4.1.207.8.15.8.1.1.2
atiswitchStaticMACEntryStatus The status of this entry. The meanings of the values are: valid(1) : This entry is valid. invalid(2) : This entry is no longer valid, but has not yet been flushed from the table.	Enumerationr/w	.1.3.6.1.4.1.207.8.15.8.1.1.3