asamSystemPortAddressingMode

This object allows the manager to configure the faceplate port
addressing mode used by operators in CLI and TL1.
With the mode set to <sequential>, the operator must specify the port
as a sequential number that span the various cards in the system.
With the mode set to <slotBased>, the operator must specify the
ports as a combination of card type, rack/slot, port type
and faceplate port number.
In the current release this object is still read only, in future
releases the default <sequential> mode for legacy ports and systems
can be changed to <slotBased>.
New systems with non-legacy ports (overlapping port numbers, XFPs),
this object is set to <slotBased> and cannot be changed.
The default for this object is <sequential> on legacy systems and
<slotBased> on new systems.
ALCATEL NOTE:
   SUPPORT: YES   INSRVMOD: YES           RANGE: 1..2
   PERSIST: YES   DEFVALUE: see above     UNITS: -

MIB

ASAM-SYSTEM-MIB

OID

.1.3.6.1.4.1.637.61.1.9.35

Type

scalar

Access

readwrite

Status

current

Parent

asamSystemMIB