ASAM-SYSTEM-MIB Table View

The license key management table.

asamSystemLicenseMgmtEntry row .1.3.6.1.4.1.637.61.1.9.17.2.1

An entry in the asamSystemLicenseMgmtTable.

Indexes

No indexes recorded

Column	Syntax	OID
licenseFeatureIndex This object is used by the asamSystemLicenseMgmtTable to identify a row of this table. Each row corresponds to a system feature that is monitored to support license management at the manager. Following integer values ar…	Integer32 Enumerated Values: 1 start 2 stop 3 proceeding 4 idle 5 not-operational	.1.3.6.1.4.1.637.61.1.9.17.2.1.1
licenseCounter The counter associated with the monitoring of the feature that corresponds to the licenseFeatureIndex value. 1. For ADSL2+, the counter indicates the number of XDSL lines for which an ADSL2+ operational …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.637.61.1.9.17.2.1.2

The CPU load monitor table.
ALCATEL NOTE:
   TABLESIZE:     max nmbr of slots

cpuLoadEntry row .1.3.6.1.4.1.637.61.1.9.29.1.1

An entry in the cpuLoadTable. The index of the entry is slotId.
An entry represents the CPU load of the board in the slot.
The CPU load includes detail value and average value respectively.
The slot can be NT slot or LT…

Indexes

No indexes recorded

Column	Syntax	OID
slotId the slotId has the same value as eqptSlotId of ASAM-EQUIP-MIB. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: 0 …	Integer32	.1.3.6.1.4.1.637.61.1.9.29.1.1.1
startMonitorTime The start timestamp of CPU load monitor is the network time in seconds. It indicates the start time of last 3 minutes or less monitoring. The startMonitorTime is the time at which the last CPU load detail & average was …	ASAM-TC-MIBNetworkTimeInSeconds Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.9.29.1.1.2
cpuLoadDetail The cpuLoadDetail object represents the CPU load percent value (x100%) in detail for 180 measurement points. The length of this object is always 180 octets. One octet represents one CPU load value of one measurement. On…	OctetString	.1.3.6.1.4.1.637.61.1.9.29.1.1.3
cpuLoadAverage The average value of CPU load. It is percent value (x100%). It is the average of detail CPU load value. One sample is generated for each second during CPU load measurement time. The maximum measurement time is 180 secon…	RFC1155-SMIGauge Constraints: range: 1-20	.1.3.6.1.4.1.637.61.1.9.29.1.1.4
operateStatus The operate status for start/stop CPU load monitoring operation. The maximum measurement time is 180 seconds. One sample is generated for a second. The maximum sample number is 180. Only the latest 180 sample values are…	Enumerationr/w	.1.3.6.1.4.1.637.61.1.9.29.1.1.5

The memory usage monitor table.

memUsageEntry row .1.3.6.1.4.1.637.61.1.9.29.2.1

An entry in the memUsageTable. The index of the entry is slotId.
An entry represents the memory usage of the board in the slot.
The memory usage includes total size and used size respectively.
The solt can be NT slot or…

Indexes

No indexes recorded

Column	Syntax	OID
totalMemSize The total memory size on board. It just indicates the size of total semi and dynamical memory. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: Mbyte	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.637.61.1.9.29.2.1.1
memAbsoluteUsage The used memory size in absolute value. It indicates total used size of semi and dynamical memory. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: NA PERSIST: NO DEFVALUE: NA UNITS: Mbyte	RFC1155-SMIGauge Constraints: range: 1-1	.1.3.6.1.4.1.637.61.1.9.29.2.1.2

The peripheral management mac filter table.
          
For enhanced security in remote cabinets, it is possible to restrict
allowed destination MAC addresses in upstream Ethernet traffic on the
peripheral port to a white-list of 20 allowed MAC address ranges.
          
Each entry of this list consists of an Original manufacturer Unique
Identifier (OUI) value, covering the 3 Most Significant Bytes (MSB)
of the public MAC address.
          
A begin and end value of a single consecutive range of MAC addresses
for the above OUI covers at maximum the full 3 Least Significant
Bytes (LSB) of the public MAC address.
          
  ALCATEL NOTE:
       TABLESIZE:  20
       DESCR:      NA

peripheralMgntMacFilterEntry row .1.3.6.1.4.1.637.61.1.9.36.1

A filter entry in the management mac filter table.
On the NRCD-B the filter is a filter on the destination mac address of
the frames received over this port.
On other cards/systems, the
filter is a filter on the source …

Indexes

No indexes recorded

Column	Syntax	OID
peripheralMgntMacFilterIndex The index for the peripheralMgntMacFilter table. A maximum of 20 mac filters is supported. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1..20 PERSIST: YES DEFVALUE: NA UNITS: NA	Integer32	.1.3.6.1.4.1.637.61.1.9.36.1.1
peripheralMgntMacFilterMacRangeFirst Specifies the first MAC address of the allowed range. Default value 00.00.00.00.00.00 ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEFVALUE: 0 UNITS: -	r/w	.1.3.6.1.4.1.637.61.1.9.36.1.2
peripheralMgntMacFilterMacRangeLast Specifies the last MAC address of the allowed range. At least the OUI part should match the OUI of the peripheralMgntMacFilterMacRangeFirst MAC address. Default value 00.00.00.00.00.00 ALCATEL NOTE: SU…	r/w	.1.3.6.1.4.1.637.61.1.9.36.1.3

The TechSupport Action Table
Use this table to launch On Demand Tech Support File generation

asamTechSupportActionEntry row .1.3.6.1.4.1.637.61.1.9.53.4.1

An entry in the asamTechSupportSessionTable.

Indexes

No indexes recorded

Column	Syntax	OID
asamTechSupportActionId The index of the Tech Support Action Table Session Entry with id 1 exists and is to be used for creating new tech support on demand requets. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: …	Integer32r/w	.1.3.6.1.4.1.637.61.1.9.53.4.1.1
asamTechSupportActionEvent Indicate which action to trigger. The Following scenarios are possible: - Generate an On Demand TS File A set with the below fields specified will generate an on-demand Tech Support file generation for a dedicated b…	Enumerationr/w	.1.3.6.1.4.1.637.61.1.9.53.4.1.2
asamTechSupportActionSessionId Specify this value in case a dedicated session ID is to be used for this request. To find a good unique session-id, a read can be done to asamTechSupportOnDemandFreeSessionId. If a value of 0 is given, then the system w…	TechSupportSessionIdr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.637.61.1.9.53.4.1.3
asamTechSupportActionType The type corresponding to the stored or requested Tech Support File. - crashLog : type for auto generated crashlog TS files for boards - boardOnDemand : type for requesting an on-demand TS file for boards - ifIndexOnDem…	TechSupportSessionTyper/w Type Values: 1 crashLog 2 boardOnDemand 3 ifIndexOnDemand	.1.3.6.1.4.1.637.61.1.9.53.4.1.4
asamTechSupportActionObject Identifier that indicates for which object that the Tech Support File was generated or requested. For a boardOnDemand(2) request, the asamTechSupportSessionObject needs to be set to the Equipment Slot Id of the board fo…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.637.61.1.9.53.4.1.5
asamTechSupportActionServerIP The IP address of the server where the Tech Support File will be uploaded to. or 0.0.0.0 in case the file needs to be stored locally on the node. Currently only a value of 0 is accepted as input. This fie…	RFC1155-SMIIpAddressr/w Constraints: range: 1-255	.1.3.6.1.4.1.637.61.1.9.53.4.1.6
asamTechSupportActionFile The filename that identifies the Tech Support File. 2 restrictions apply - For storing locally on the Node identified via asamTechSupportActionServerIP = 0 size of asamTechSupportActionFile is max 13 characters …	OctetStringr/w Enumerated Values: 1 busy 2 failed 3 done	.1.3.6.1.4.1.637.61.1.9.53.4.1.7

The TechSupport Session Table

asamTechSupportSessionEntry row .1.3.6.1.4.1.637.61.1.9.53.5.1

An entry in the asamTechSupportSessionTable.

Indexes

No indexes recorded

Column	Syntax	OID
asamTechSupportSessionId A unique value to identify a Tech Support Session ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: 0..65535 PERSIST: YES DEFVALUE: NA UNITS: -	TechSupportSessionId Type Constraints: range: 0..65535	.1.3.6.1.4.1.637.61.1.9.53.5.1.1
asamTechSupportSessionType The type corresponding to the stored or requested Tech Support File. - crashLog : type for auto generated crashlog TS files for boards - boardOnDemand : type for requesting an on-demand TS file for boards - ifIndexOnDem…	TechSupportSessionType Type Values: 1 crashLog 2 boardOnDemand 3 ifIndexOnDemand	.1.3.6.1.4.1.637.61.1.9.53.5.1.2
asamTechSupportSessionObject Identifier that indicates for which object that the Tech Support File was generated or requested. 2 cases exist: - asamTechSupportSessionObject = slotId for asamTechSupportSessionType crashLog or boardOnDemand …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.637.61.1.9.53.5.1.3
asamTechSupportSessionServerIP The IP address of the server where the Tech Support File will be uploaded to. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -	RFC1155-SMIIpAddress Constraints: range: -780-840	.1.3.6.1.4.1.637.61.1.9.53.5.1.4
asamTechSupportSessionFile The filename that identifies the Tech Support File. format - filename [max 13 characters] - fileserver:path/filename [ max 255 chars] ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see a…	OctetString Enumerated Values: 0 sunday 1 monday 2 tuesday 3 wednesday 4 thursday 5 friday 6 saturday	.1.3.6.1.4.1.637.61.1.9.53.5.1.5
asamTechSupportSessionStatus This object shows the status for a session-entry. The initial status is busy(1). When the generation completes successfully, then it goes to done(3). In case of an error, then it goes to failed(2) state and the failure …	Enumeration Enumerated Values: 0 first 1 second 2 third 3 fourth 4 last	.1.3.6.1.4.1.637.61.1.9.53.5.1.6
asamTechSupportSessionError This object shows error information for a failed session-entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -	Enumeration Enumerated Values: 0 january 1 february 2 march 3 april 4 may 5 june 6 july 7 august 8 september 9 october 10 november 11 december	.1.3.6.1.4.1.637.61.1.9.53.5.1.7
asamTechSupportSessionSize This object shows the size of the collected TS file ALCATEL NOTE: SUPPORT: YES INSRVMOD: NO RANGE: see above PERSIST: YES DEFVALUE: NA UNITS: -	Integer32 Constraints: range: 0-23	.1.3.6.1.4.1.637.61.1.9.53.5.1.8
asamTechSupportSessionTime Shows the Time in seconds from 1900 when the TS-entry was collected. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: see above PERSIST: NO DEFVALUE: NA UNITS: -	ASAM-TC-MIBNetworkTimeInSeconds Constraints: range: 0-59	.1.3.6.1.4.1.637.61.1.9.53.5.1.9

The asamDstRecurringConfTable has an entry for each daylight saving time
zone information with the specified week and weekday repeatedly.
ALCATEL NOTE:
    SUPPORT: YES   INSRVMOD: NA        RANGE: NA
    PERSIST: YES   DEFVALUE: NA        UNITS: NA

asamDstRecurringConfEntry row .1.3.6.1.4.1.637.61.1.9.62.1

Each row entry contains information about a daylight saving time
zone.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: YES DEFVALUE: NA UNITS: NA

Indexes

No indexes recorded

Column	Syntax	OID
asamDstRecurringZoneIndex This represents a daylight saving time zone. This index must be unique amongst the table entries. Because snmp index can't recognise negative integer,so we shift the zone range to [0...1620] as a workaround ALCATEL NOTE…	Integer32 Enumerated Values: 0 january 1 february 2 march 3 april 4 may 5 june 6 july 7 august 8 september 9 october 10 november 11 december	.1.3.6.1.4.1.637.61.1.9.62.1.1
asamDstConfStartWeekDay The starting day of the week when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..6 PERSIST: YES DEFVALUE: sunday(0) UNITS: NA	Enumerationr/w Constraints: range: 0-23	.1.3.6.1.4.1.637.61.1.9.62.1.2
asamDstConfStartWeek The starting week of the month when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..4 PERSIST: YES DEFVALUE: first(0) UNITS: NA	Enumerationr/w Constraints: range: 0-59	.1.3.6.1.4.1.637.61.1.9.62.1.3
asamDstConfStartMonth The starting month of the year when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..11 PERSIST: YES DEFVALUE: january(0) UNITS: NA	Enumerationr/w Constraints: range: 0-60	.1.3.6.1.4.1.637.61.1.9.62.1.4
asamDstConfStartHour The hour at which the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..23 PERSIST: YES DEFVALUE: 0 UNITS: hours	Integer32r/w	.1.3.6.1.4.1.637.61.1.9.62.1.5
asamDstConfStartMinute The number of minutes after the hours defined by asamDstConfStartHour when the summer time will take effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..59 PERSIST: YES DEFVALUE: 0 UNI…	Integer32r/w	.1.3.6.1.4.1.637.61.1.9.62.1.6
asamDstConfEndWeekDay The day of the week when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..6 PERSIST: YES DEFVALUE: sunday(0) UNITS: NA	Enumerationr/w	.1.3.6.1.4.1.637.61.1.9.62.1.7
asamDstConfEndWeek The week of the month when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..4 PERSIST: YES DEFVALUE: first(0) UNITS: NA	Enumerationr/w	.1.3.6.1.4.1.637.61.1.9.62.1.8
asamDstConfEndMonth The month of the year when the summer time setting will end. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..11 PERSIST: YES DEFVALUE: january(0) UNITS: NA	Enumerationr/w Constraints: range: -780-840	.1.3.6.1.4.1.637.61.1.9.62.1.9
asamDstConfEndHour The hour at which the summer time will stop taking effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..23 PERSIST: YES DEFVALUE: 0 UNITS: hours	Integer32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.637.61.1.9.62.1.10
asamDstConfEndMinute The number of minutes after the hours defined by asamDstConfEndHour when the summer time will stop taking effect. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 0..59 PERSIST: YES DEFVALUE: 0 …	Integer32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.637.61.1.9.62.1.11
asamDstRecurringAdjustment The number of minutes that will be added to the time when daylight saving time takes effect. The same number of minutes will be subtracted from the time when the daylight saving time ends. ALCATEL NOTE: SUPPORT: YES…	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.637.61.1.9.62.1.12
asamDstRecurringIsAffectedSrc The value of asamDstRecurringIsAffectedSrc indicates whether this configuration entry match the OLT timezone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: 2 …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.637.61.1.9.62.1.13
asamDstRecurringRowStatus The row status used to create and delete rows in this table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.637.61.1.9.62.1.14

The asamDstDateConfTable has an entry for each daylight saving time
zone information with the specified with the corresponding specified days some year.
ALCATEL NOTE:
     SUPPORT: YES   INSRVMOD: NA        RANGE: NA
     PERSIST: YES   DEFVALUE: NA        UNITS: NA

asamDstDateConfEntry row .1.3.6.1.4.1.637.61.1.9.63.1

Each row entry contains information about a daylight saving time
zone.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: YES DEFVALUE: NA UNITS: NA

Indexes

No indexes recorded

Column	Syntax	OID
asamDstDateZoneIndex This represents a daylight saving time zone. This index must be unique amongst the table entries. Because snmp index can't recognise negative integer,so we shift the zone range to [0...1620] as a workaround ALCATEL NOTE…	Integer32	.1.3.6.1.4.1.637.61.1.9.63.1.1
asamDstConfStartDate The time when the daylight saving time will take effect means the number of standard seconds since 0h on 1 January 1900. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4294967295 PERSIST: YES DEFVA…	Unsigned32r/w	.1.3.6.1.4.1.637.61.1.9.63.1.2
asamDstConfEndDate The time when daylight saving time will end means the number of standard seconds since0h on 1 January 1900. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..4294967295 PERSIST: YES DEFVALUE: NA …	Unsigned32r/w	.1.3.6.1.4.1.637.61.1.9.63.1.3
asamDstDateAdjustment The number of minutes that will be added to the time when daylight saving time takes effect. The same number of minutes will be subtracted from the time when the daylight saving time ends. ALCATEL NOTE: SUPPORT: YES…	Integer32r/w	.1.3.6.1.4.1.637.61.1.9.63.1.4
asamDstDateIsAffectedSrc The value of asamDstDateIsAffectedSrc indicates whether this configuration entry match the OLT timezone. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1..2 PERSIST: YES DEFVALUE: 2 UNITS: …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.637.61.1.9.63.1.5
asamDstDateRowStatus The row status used to create and delete rows in this table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: NA PERSIST: YES DEFVALUE: NA UNITS: NA	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.637.61.1.9.63.1.6