arrisRouterWiFiCustomSSIDStr

ARRIS-ROUTER-DEVICE-MIB · .1.3.6.1.4.1.4115.1.20.1.1.3.34
MIB view Table view

Object

scalar r/w SNMPv2-TCDisplayString 
A string used to customize the Service Set Idenitifer (SSID). The last 4 characters of the CM MAC address will automatically be appended to this string. 
This string will overwrite the factory defined SSID but will be overwritten by user settings

Context

MIB
ARRIS-ROUTER-DEVICE-MIB
OID
.1.3.6.1.4.1.4115.1.20.1.1.3.34
Type
scalar
Access
readwrite
Status
current
Parent
arrisRouterWirelessCfg
Siblings
47

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arrisRouterWiFiCountry
Wireless country code
scalarOctetString.1.3.6.1.4.1.4115.1.20.1.1.3.1
arrisRouterWiFiShortSlot
Enable short slot time.The amount of time a device waits after a collision before retransmitting a packet. You can increase throughput on 802.11g, 2.4-GHz radios by enabling short…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.10
arrisRouterWiFiFrameBurst
Bursting may increase the throughput of link connection in certain conditions. This can result in the ability to support higher data throughput in mixed and uniform networks. Also…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.11
arrisRouterWiFiEnableRadio
Enable or disable WiFi radio.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.12
arrisRouterWiFiShortRetryLimit
Get or set the retry limit of frames longer than the RTS threshold
scalarInteger32.1.3.6.1.4.1.4115.1.20.1.1.3.14
arrisRouterWiFiLongRetryLimit
Get or set the retry limit of frames shorter than the RTS threshold
scalarInteger32.1.3.6.1.4.1.4115.1.20.1.1.3.15
arrisRouterWiFiOutputPower
Sets the output power relative to the hardware's maximum capability. Now only percent25(25), percent50(50) and percent100(100) can be set, they are mapped to Low, medium and high…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.16
arrisRouterWiFiChannel
Controls and reflects the current channel number (802.11g) or control channel (802.11n). If set to (0), the device will be put in auto-channel mode where it automatical…
scalarUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.2
arrisRouterWiFi80211NSettingsnode-.1.3.6.1.4.1.4115.1.20.1.1.3.21
arrisRouterBSSTable
Table contains settings for individual wireless networks (SSID).
table-.1.3.6.1.4.1.4115.1.20.1.1.3.22
arrisRouterWEPTable
Table contains settings for wireless networks.
table-.1.3.6.1.4.1.4115.1.20.1.1.3.23
arrisRouterWEP64BitKeyTable
A table of 40 bit key values used when operating in WEP 64 mode.
table-.1.3.6.1.4.1.4115.1.20.1.1.3.24
arrisRouterWEP128BitKeyTable
A table of 104 bit key values used when operating in WEP 128 mode.
table-.1.3.6.1.4.1.4115.1.20.1.1.3.25
arrisRouterWPATable
A table used to configure settings related to the WPA security modes.
table-.1.3.6.1.4.1.4115.1.20.1.1.3.26
arrisRouterRadiusTable
A table used to configure settings related to the RADIUS security modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP.
table-.1.3.6.1.4.1.4115.1.20.1.1.3.27
arrisRouterMACAccessTable
A table of MAC addresses which defines the MAC address based access restrictions for the system.
table-.1.3.6.1.4.1.4115.1.20.1.1.3.28
arrisRouterWMMCfgnode-.1.3.6.1.4.1.4115.1.20.1.1.3.29
arrisRouterWiFiMode
Controls and reflects the behavior of the device with regards to which flavor of 802.11 is used.
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.3
arrisRouterWPSCfgnode-.1.3.6.1.4.1.4115.1.20.1.1.3.30
arrisRouterWiFiResetDefaults
Reset Wifi settings to default values. Use 'nothingToReset(0)' to indicate that nothing is to be reset. Use 'resetWifiDefaults(1)' to reset all Wireless Networks back to their def…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.32
arrisRouterWiFiRadioControlMode
When equal to userControlled, no wireless radio settings will be changed as a result of receiving this element. Current setting will remain in effect. When equal to m…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.37
arrisRouterWiFiScannode-.1.3.6.1.4.1.4115.1.20.1.1.3.39
arrisRouterWiFiBGProtect
Controls and reflects the state of 54g protection. If set to true(1), the AP will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks. Set to false(2) …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.4
arrisRouterWiFiClientInfoTable
This table contains detailed information about currently connected wireless client devices.
table-.1.3.6.1.4.1.4115.1.20.1.1.3.42
arrisRouterWiFiPhysicalChannel
The current channel the WiFi is using. This may match arrisRouterWiFiChannel except when that value is auto(0). When the 'auto' mode is used, this OID will return the actual cha…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4115.1.20.1.1.3.43
arrisRouterWiFiBeaconInterval
Amount of time between beacon transmissions.
scalarmilliseconds Unsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.5
arrisRouterWiFi50RadioSettingsnode-.1.3.6.1.4.1.4115.1.20.1.1.3.50
arrisRouterWiFiNumSSIDSupported
Number of SSIDs Supported
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.51
arrisRouterWiFiHTTxStream
Set or get the stream number on which the wireless antenna transmits.
scalarUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.55
arrisRouterWiFiHTRxStream
Set or get the stream number on which the wireless antenna receives.
scalarUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.56
arrisRouterWiFiEnableSTBC
Enable or disable Space Time Block Coding.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.57
arrisRouterWiFiEnableRDG
Enable or disable Reverse Direction Grant.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.58
arrisRouterWiFiIGMPSnooping
Enable or disable IGMP snooping. When enabled it prevents unnecessary multicast traffic to the ports which did not subscribe to the multicast stream.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.59
arrisRouterWiFiDTIMInterval
Amount of time between Delivery Traffic Indication Messages.
scalarmilliseconds Unsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.6
arrisRouterWiFiRTSRetry
Set or get the 2.4GHz RTS retry count. A non-zero value overrides the default RTS retry logic for single-client and multi-client. If non-zero then the MIB value is the count used…
scalarInteger32.1.3.6.1.4.1.4115.1.20.1.1.3.60
arrisRouterWiFiTxRetry
Set or get the 2.4GHz Tx retry count. A non-zero value overrides the default data Tx retry logic for single-client and multi-client. If non-zero then the MIB value is the count …
scalarInteger32.1.3.6.1.4.1.4115.1.20.1.1.3.61
arrisRouterWiFiPhysicalChannelStatsnode-.1.3.6.1.4.1.4115.1.20.1.1.3.62
arrisRouterWMM50Cfgnode-.1.3.6.1.4.1.4115.1.20.1.1.3.63
arrisRouterWiFiExtensionChannel
Set or get the 2.4GHz extension channel for 40MHz operation The value of extension channel depends on the arrisRouterWiFiChannel.
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.64
arrisRouterWPS50Cfgnode-.1.3.6.1.4.1.4115.1.20.1.1.3.65
arrisRouterWifiLowInitRate
Set true will reduce data rate based on increasing packet error ratio. Set false will turn off this function.This MIB is for MTK 3352.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.66
arrisRouterWiFiBssStaSteeringnode-.1.3.6.1.4.1.4115.1.20.1.1.3.69
arrisRouterWiFiTxPreamble
This attribute, indicates whether the transfer preamble is long or short.
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.7
arrisRouterWiFiInterworkingIE
Enable or Disable the Interworking Informational Element for ALL BSSs on all radios.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.70
arrisRouterWiFiRTSThreshold
The RTS (Request to Send) Threshold indicates the number of bytes in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at …
scalarbytes Unsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.8
arrisRouterWiFiFragmentThresh
This value specifies the maximum size of a packet before the data is fragmented into two or more packets
scalarbytes Unsigned32.1.3.6.1.4.1.4115.1.20.1.1.3.9
arrisRouterAirtimeCtrlCfgnode-.1.3.6.1.4.1.4115.1.20.1.1.3.99