arrisRouterWiFi50OutputPower
ARRIS-ROUTER-DEVICE-MIB ·
.1.3.6.1.4.1.4115.1.20.1.1.3.50.14
Object
scalar
r/w
Enumeration
Sets the output power relative to the hardware's maximum capability. Now only percent25(25), percent50(50) and percent100(100) can be set, they are mapped to Low, medium and high power level which used on GUI.
Context
- MIB
- ARRIS-ROUTER-DEVICE-MIB
- OID
.1.3.6.1.4.1.4115.1.20.1.1.3.50.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- arrisRouterWiFi50RadioSettings
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
12 | percent12 |
25 | percent25 |
50 | percent50 |
75 | percent75 |
100 | percent100 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arrisRouterWiFi50Channel Controls and reflects the current channel number on the 5.0 GHz radio (802.11 a/n).
If set to (0), the device will be put in auto-channel mode where it automatically sc… | scalar | Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.1 |
| arrisRouterWiFi50EnableRadio Enable or disable 5 GHz WiFi radio. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.50.10 |
| arrisRouterWiFi50ShortRetryLimit Get or set the retry limit of frames longer than the RTS threshold. | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.12 |
| arrisRouterWiFi50LongRetryLimit Get or set the retry limit of frames shorter than the RTS threshold. | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.13 |
| arrisRouterWiFi50MulticastA Get or set the multicast rate for 802.11a. | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.50.15 |
| arrisRouterWiFi50PhysicalChannel The current channel the 5.0 GHz WiFi radio is using. This may match arrisRouterWiFiChannel except when that value is auto(0).
When the 'auto' mode is used, this OID will return th… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.16 |
| arrisRouterWiFi50Mode Controls and reflects the behavior of the device with regards to which
flavor of 802.11 is used. | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.50.2 |
| arrisRouterWiFi50NSettings | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.50.20 |
| arrisRouterWiFi50HTTxStream Set or get the stream number on which the wireless antenna transmits. | scalar | Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.21 |
| arrisRouterWiFi50HTRxStream Set or get the stream number on which the wireless antenna receives. | scalar | Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.22 |
| arrisRouterWiFi50EnableSTBC Enable or disable Space Time Block Coding. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.50.23 |
| arrisRouterWiFi50EnableRDG Enable or disable Reverse Direction Grant. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.50.24 |
| arrisRouterWiFi50IGMPSnooping Enable or disable IGMP snooping.
When enabled it prevents unnecessary multicast traffic to the ports which did not subscribe to the multicast stream. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.50.25 |
| arrisRouterWiFi50BlockDFSChan Used to enable or disable the inclusion of DFS channels when configured to auto-select channels.
When enabled, it blocks DFS channels from being automatically selected.
When disab… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.50.26 |
| arrisRouterWiFi50RTSRetry Set or get the 5.0GHz RTS retry count. A non-zero value overrides the default RTS retry logic for single-client and multi-client. If non-zero then the MIB value is the count used… | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.27 |
| arrisRouterWiFi50TxRetry Set or get the 5.0GHz Tx retry count. A non-zero value overrides the default data Tx retry logic for single-client and multi-client. If non-zero then the MIB value is the count … | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.28 |
| arrisRouterWiFi50BeaconInterval Amount of time between beacon transmissions. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.3 |
| arrisRouterWiFi50DTIMInterval Amount of time between Delivery Traffic Indication Messages. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.4 |
| arrisRouterWiFi50TxPreamble This attribute, indicates whether the transfer preamble is long or short. | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.50.5 |
| arrisRouterWiFi50RTSThreshold The RTS (Request to Send) Threshold indicates the number of bytes in an MPDU,
below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall
be performed at … | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.6 |
| arrisRouterWiFi50FragmentThresh This value specifies the maximum size of a packet before the data is fragmented into two or more packets. | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.50.7 |
| arrisRouterWiFi50ShortSlot This returns whether or not the use of short slot timing mode is on or off (long).
The amount of time a device waits after a collision before retransmitting a packet.
You can in… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.50.8 |
| arrisRouterWiFi50FrameBurst Bursting may increase the throughput of link connection in certain
conditions. This can result in the ability to support higher data
throughput in mixed and uniform networks. Also… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.50.9 |