arrisRouterWiFi50ChannelBW

ARRIS-ROUTER-DEVICE-MIB · .1.3.6.1.4.1.4115.1.20.1.1.3.50.20.2
MIB view Table view

Object

scalar r/w Enumeration 
Determines which Band Width that we will be operating in. Either the 20MHz 40MHz or 80MHz.
Note: This is for 802.11n mode only.

Context

MIB
ARRIS-ROUTER-DEVICE-MIB
OID
.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.2
Type
scalar
Access
readwrite
Status
current
Parent
arrisRouterWiFi50NSettings
Siblings
8

Syntax

Enumeration

Values & Constraints

Enumerated Values
-1unknown
0width20MHz
2width20and40Mhz
3width20and40and80Mhz

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arrisRouterWiFi50HTMCS
Get or set the 802.11n physical modulation coding scheme (MCS) rate. Forces the N Phy transmission rate for the AP to a particular speed. Each group of rates corresponds to BW (…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.1
arrisRouterWiFi50NSideBand
Determines which side Band the channel will operate in. Note: This is for 802.11n mode only, this OID is dependent on what arrisRouterWiFiChannelBW is selected and only applies wh…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.3
arrisRouterWiFi50HTMode
In mixed mode, each 802.11n transmission is always embedded in an 802.11a or 802.11g transmission. Green field will ingore some of the early standard, so 802.11n devices have high…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.4
arrisRouterWiFi50GuardInterval
Spacing between transmission of symbols in nanoseconds.
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.5
arrisRouterWiFi50AMSDUEnable
Aggregation of MAC Service Data Units (MSDUs) at the top of the MAC.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.6
arrisRouterWiFi50DeclinePeerBA
Enable or disable rejection of peer BA-request.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.7
arrisRouterWiFi50BlockAck
Enable or disable blocking of ACK (BA) during data transfer.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.8
arrisRouterWiFi50NProtection
Set/read 802.11n protection setting. This is for OFDM protection for MIMO frames.
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.3.50.20.9