arrisRouterWPATable
ARRIS-ROUTER-DEVICE-MIB ·
.1.3.6.1.4.1.4115.1.20.1.1.3.26
Object
table
A table used to configure settings related to the WPA security modes.
Context
- MIB
- ARRIS-ROUTER-DEVICE-MIB
- OID
.1.3.6.1.4.1.4115.1.20.1.1.3.26- Type
- table
- Status
- current
- Parent
- arrisRouterWirelessCfg
- Siblings
- 47
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arrisRouterWiFiCountry Wireless country code | scalar | OctetString | .1.3.6.1.4.1.4115.1.20.1.1.3.1 |
| arrisRouterWiFiShortSlot Enable short slot time.The amount of time a device waits after a collision
before retransmitting a packet. You can increase throughput on 802.11g,
2.4-GHz radios by enabling short… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.10 |
| arrisRouterWiFiFrameBurst Bursting may increase the throughput of link connection in certain
conditions. This can result in the ability to support higher data
throughput in mixed and uniform networks. Also… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.11 |
| arrisRouterWiFiEnableRadio Enable or disable WiFi radio. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.12 |
| arrisRouterWiFiShortRetryLimit Get or set the retry limit of frames longer than the RTS threshold | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.14 |
| arrisRouterWiFiLongRetryLimit Get or set the retry limit of frames shorter than the RTS threshold | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.15 |
| arrisRouterWiFiOutputPower Sets the output power relative to the hardware's maximum capability.
Now only percent25(25), percent50(50) and percent100(100) can be set,
they are mapped to Low, medium and high… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.16 |
| arrisRouterWiFiChannel Controls and reflects the current channel number (802.11g) or
control channel (802.11n).
If set to (0), the device will be put in auto-channel mode where it automatical… | scalar | Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.2 |
| arrisRouterWiFi80211NSettings | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.21 |
| arrisRouterBSSTable Table contains settings for individual wireless networks (SSID). | table | - | .1.3.6.1.4.1.4115.1.20.1.1.3.22 |
| arrisRouterWEPTable Table contains settings for wireless networks. | table | - | .1.3.6.1.4.1.4115.1.20.1.1.3.23 |
| arrisRouterWEP64BitKeyTable A table of 40 bit key values used when operating in WEP 64 mode. | table | - | .1.3.6.1.4.1.4115.1.20.1.1.3.24 |
| arrisRouterWEP128BitKeyTable A table of 104 bit key values used when operating in WEP 128 mode. | table | - | .1.3.6.1.4.1.4115.1.20.1.1.3.25 |
| arrisRouterRadiusTable A table used to configure settings related to the RADIUS security
modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP. | table | - | .1.3.6.1.4.1.4115.1.20.1.1.3.27 |
| arrisRouterMACAccessTable A table of MAC addresses which defines the MAC address based access
restrictions for the system. | table | - | .1.3.6.1.4.1.4115.1.20.1.1.3.28 |
| arrisRouterWMMCfg | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.29 |
| arrisRouterWiFiMode Controls and reflects the behavior of the device with regards to which
flavor of 802.11 is used. | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.3 |
| arrisRouterWPSCfg | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.30 |
| arrisRouterWiFiResetDefaults Reset Wifi settings to default values.
Use 'nothingToReset(0)' to indicate that nothing is to be reset.
Use 'resetWifiDefaults(1)' to reset all Wireless Networks back to their def… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.32 |
| arrisRouterWiFiCustomSSIDStr A string used to customize the Service Set Idenitifer (SSID). The last 4 characters of the CM MAC address will automatically be appended to this string.
This string will overwrit… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4115.1.20.1.1.3.34 |
| arrisRouterWiFiRadioControlMode When equal to userControlled, no wireless radio settings will be changed as a result of receiving this element.
Current setting will remain in effect.
When equal to m… | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.37 |
| arrisRouterWiFiScan | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.39 |
| arrisRouterWiFiBGProtect Controls and reflects the state of 54g protection. If set to true(1),
the AP will use RTS/CTS to improve 802.11g performance in mixed
802.11g/802.11b networks. Set to false(2) … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.4 |
| arrisRouterWiFiClientInfoTable This table contains detailed information about currently connected wireless client devices. | table | - | .1.3.6.1.4.1.4115.1.20.1.1.3.42 |
| arrisRouterWiFiPhysicalChannel The current channel the WiFi is using. This may match arrisRouterWiFiChannel except when that value is auto(0).
When the 'auto' mode is used, this OID will return the actual cha… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.20.1.1.3.43 |
| arrisRouterWiFiBeaconInterval Amount of time between beacon transmissions. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.5 |
| arrisRouterWiFi50RadioSettings | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.50 |
| arrisRouterWiFiNumSSIDSupported Number of SSIDs Supported | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.51 |
| arrisRouterWiFiHTTxStream Set or get the stream number on which the wireless antenna transmits. | scalar | Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.55 |
| arrisRouterWiFiHTRxStream Set or get the stream number on which the wireless antenna receives. | scalar | Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.56 |
| arrisRouterWiFiEnableSTBC Enable or disable Space Time Block Coding. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.57 |
| arrisRouterWiFiEnableRDG Enable or disable Reverse Direction Grant. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.58 |
| arrisRouterWiFiIGMPSnooping Enable or disable IGMP snooping.
When enabled it prevents unnecessary multicast traffic to the ports which did not subscribe to the multicast stream. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.59 |
| arrisRouterWiFiDTIMInterval Amount of time between Delivery Traffic Indication Messages. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.6 |
| arrisRouterWiFiRTSRetry Set or get the 2.4GHz RTS retry count. A non-zero value overrides the default RTS retry logic for single-client and multi-client. If non-zero then the MIB value is the count used… | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.60 |
| arrisRouterWiFiTxRetry Set or get the 2.4GHz Tx retry count. A non-zero value overrides the default data Tx retry logic for single-client and multi-client. If non-zero then the MIB value is the count … | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.3.61 |
| arrisRouterWiFiPhysicalChannelStats | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.62 |
| arrisRouterWMM50Cfg | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.63 |
| arrisRouterWiFiExtensionChannel Set or get the 2.4GHz extension channel for 40MHz operation
The value of extension channel depends on the arrisRouterWiFiChannel. | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.64 |
| arrisRouterWPS50Cfg | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.65 |
| arrisRouterWifiLowInitRate Set true will reduce data rate based on increasing packet error ratio. Set false will turn off this function.This MIB is for MTK 3352. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.66 |
| arrisRouterWiFiBssStaSteering | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.69 |
| arrisRouterWiFiTxPreamble This attribute, indicates whether the transfer preamble is long or short. | scalar | Enumeration | .1.3.6.1.4.1.4115.1.20.1.1.3.7 |
| arrisRouterWiFiInterworkingIE Enable or Disable the Interworking Informational
Element for ALL BSSs on all radios. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.3.70 |
| arrisRouterWiFiRTSThreshold The RTS (Request to Send) Threshold indicates the number of bytes in an MPDU,
below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall
be performed at … | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.8 |
| arrisRouterWiFiFragmentThresh This value specifies the maximum size of a packet before the data is fragmented into two or more packets | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.3.9 |
| arrisRouterAirtimeCtrlCfg | node | - | .1.3.6.1.4.1.4115.1.20.1.1.3.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arrisRouterWPAEntry An entry defining the WPA characteristics of an individual service set.
A row exists in this table for each row in the arrisRouterBSSTable for which
arrisRouterWiFiSecurityMode is… | row | - | .1.3.6.1.4.1.4115.1.20.1.1.3.26.1 |