arrisRouterMACAccessTable

ARRIS-ROUTER-DEVICE-MIB · .1.3.6.1.4.1.4115.1.20.1.1.3.28

Object

table

A table of MAC addresses which defines the MAC address based access 
restrictions for the system.

Context

MIB: ARRIS-ROUTER-DEVICE-MIB
OID: .1.3.6.1.4.1.4115.1.20.1.1.3.28
Type: table
Status: current
Parent: arrisRouterWirelessCfg
Siblings: 47
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
arrisRouterWiFiCountry Wireless country code	scalar	OctetString	`.1.3.6.1.4.1.4115.1.20.1.1.3.1`
arrisRouterWiFiShortSlot Enable short slot time.The amount of time a device waits after a collision before retransmitting a packet. You can increase throughput on 802.11g, 2.4-GHz radios by enabling short…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.10`
arrisRouterWiFiFrameBurst Bursting may increase the throughput of link connection in certain conditions. This can result in the ability to support higher data throughput in mixed and uniform networks. Also…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.11`
arrisRouterWiFiEnableRadio Enable or disable WiFi radio.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.12`
arrisRouterWiFiShortRetryLimit Get or set the retry limit of frames longer than the RTS threshold	scalar	Integer32	`.1.3.6.1.4.1.4115.1.20.1.1.3.14`
arrisRouterWiFiLongRetryLimit Get or set the retry limit of frames shorter than the RTS threshold	scalar	Integer32	`.1.3.6.1.4.1.4115.1.20.1.1.3.15`
arrisRouterWiFiOutputPower Sets the output power relative to the hardware's maximum capability. Now only percent25(25), percent50(50) and percent100(100) can be set, they are mapped to Low, medium and high…	scalar	Enumeration	`.1.3.6.1.4.1.4115.1.20.1.1.3.16`
arrisRouterWiFiChannel Controls and reflects the current channel number (802.11g) or control channel (802.11n). If set to (0), the device will be put in auto-channel mode where it automatical…	scalar	Unsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.2`
arrisRouterWiFi80211NSettings	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.21`
arrisRouterBSSTable Table contains settings for individual wireless networks (SSID).	table	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.22`
arrisRouterWEPTable Table contains settings for wireless networks.	table	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.23`
arrisRouterWEP64BitKeyTable A table of 40 bit key values used when operating in WEP 64 mode.	table	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.24`
arrisRouterWEP128BitKeyTable A table of 104 bit key values used when operating in WEP 128 mode.	table	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.25`
arrisRouterWPATable A table used to configure settings related to the WPA security modes.	table	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.26`
arrisRouterRadiusTable A table used to configure settings related to the RADIUS security modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP.	table	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.27`
arrisRouterWMMCfg	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.29`
arrisRouterWiFiMode Controls and reflects the behavior of the device with regards to which flavor of 802.11 is used.	scalar	Enumeration	`.1.3.6.1.4.1.4115.1.20.1.1.3.3`
arrisRouterWPSCfg	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.30`
arrisRouterWiFiResetDefaults Reset Wifi settings to default values. Use 'nothingToReset(0)' to indicate that nothing is to be reset. Use 'resetWifiDefaults(1)' to reset all Wireless Networks back to their def…	scalar	Enumeration	`.1.3.6.1.4.1.4115.1.20.1.1.3.32`
arrisRouterWiFiCustomSSIDStr A string used to customize the Service Set Idenitifer (SSID). The last 4 characters of the CM MAC address will automatically be appended to this string. This string will overwrit…	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.4115.1.20.1.1.3.34`
arrisRouterWiFiRadioControlMode When equal to userControlled, no wireless radio settings will be changed as a result of receiving this element. Current setting will remain in effect. When equal to m…	scalar	Enumeration	`.1.3.6.1.4.1.4115.1.20.1.1.3.37`
arrisRouterWiFiScan	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.39`
arrisRouterWiFiBGProtect Controls and reflects the state of 54g protection. If set to true(1), the AP will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks. Set to false(2) …	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.4`
arrisRouterWiFiClientInfoTable This table contains detailed information about currently connected wireless client devices.	table	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.42`
arrisRouterWiFiPhysicalChannel The current channel the WiFi is using. This may match arrisRouterWiFiChannel except when that value is auto(0). When the 'auto' mode is used, this OID will return the actual cha…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4115.1.20.1.1.3.43`
arrisRouterWiFiBeaconInterval Amount of time between beacon transmissions.	scalar	milliseconds Unsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.5`
arrisRouterWiFi50RadioSettings	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.50`
arrisRouterWiFiNumSSIDSupported Number of SSIDs Supported	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.51`
arrisRouterWiFiHTTxStream Set or get the stream number on which the wireless antenna transmits.	scalar	Unsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.55`
arrisRouterWiFiHTRxStream Set or get the stream number on which the wireless antenna receives.	scalar	Unsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.56`
arrisRouterWiFiEnableSTBC Enable or disable Space Time Block Coding.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.57`
arrisRouterWiFiEnableRDG Enable or disable Reverse Direction Grant.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.58`
arrisRouterWiFiIGMPSnooping Enable or disable IGMP snooping. When enabled it prevents unnecessary multicast traffic to the ports which did not subscribe to the multicast stream.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.59`
arrisRouterWiFiDTIMInterval Amount of time between Delivery Traffic Indication Messages.	scalar	milliseconds Unsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.6`
arrisRouterWiFiRTSRetry Set or get the 2.4GHz RTS retry count. A non-zero value overrides the default RTS retry logic for single-client and multi-client. If non-zero then the MIB value is the count used…	scalar	Integer32	`.1.3.6.1.4.1.4115.1.20.1.1.3.60`
arrisRouterWiFiTxRetry Set or get the 2.4GHz Tx retry count. A non-zero value overrides the default data Tx retry logic for single-client and multi-client. If non-zero then the MIB value is the count …	scalar	Integer32	`.1.3.6.1.4.1.4115.1.20.1.1.3.61`
arrisRouterWiFiPhysicalChannelStats	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.62`
arrisRouterWMM50Cfg	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.63`
arrisRouterWiFiExtensionChannel Set or get the 2.4GHz extension channel for 40MHz operation The value of extension channel depends on the arrisRouterWiFiChannel.	scalar	Enumeration	`.1.3.6.1.4.1.4115.1.20.1.1.3.64`
arrisRouterWPS50Cfg	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.65`
arrisRouterWifiLowInitRate Set true will reduce data rate based on increasing packet error ratio. Set false will turn off this function.This MIB is for MTK 3352.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.66`
arrisRouterWiFiBssStaSteering	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.69`
arrisRouterWiFiTxPreamble This attribute, indicates whether the transfer preamble is long or short.	scalar	Enumeration	`.1.3.6.1.4.1.4115.1.20.1.1.3.7`
arrisRouterWiFiInterworkingIE Enable or Disable the Interworking Informational Element for ALL BSSs on all radios.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4115.1.20.1.1.3.70`
arrisRouterWiFiRTSThreshold The RTS (Request to Send) Threshold indicates the number of bytes in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at …	scalar	bytes Unsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.8`
arrisRouterWiFiFragmentThresh This value specifies the maximum size of a packet before the data is fragmented into two or more packets	scalar	bytes Unsigned32	`.1.3.6.1.4.1.4115.1.20.1.1.3.9`
arrisRouterAirtimeCtrlCfg	node	-	`.1.3.6.1.4.1.4115.1.20.1.1.3.99`

Child Objects