arrisCmDoc30SpectrumNumBinsPerSegment
ARRIS-CM-DOC30-DEVICE-MIB ·
.1.3.6.1.4.1.4115.1.3.4.1.3.209.7
Object
scalar
r/w
bins-per-segment Unsigned32
This attribute controls the number of bins collected
by the measurement performed for each segment (instance)
in the docsIf3CmSpectrumAnalysisMeasTable.
Note that if this attribute is set to an invalid value,
the device may return an error, or may adjust the value
of the attribute to the closest valid value.
Setting this mib should be prior to arrisCmDoc30SpectrumEnable
to make it take effect
Context
- MIB
- ARRIS-CM-DOC30-DEVICE-MIB
- OID
.1.3.6.1.4.1.4115.1.3.4.1.3.209.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- bins-per-segment
- Parent
- arrisCmDoc30Spectrum
- Siblings
- 9
Syntax
bins-per-segment Unsigned32
Values & Constraints
Object Constraints
range: 2-2048
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arrisCmDoc30SpectrumMeasurementTable This table provides a list of spectral analysis measurements as
performed across a range of center frequencies. The table is capable
of representing a full scan of the spectrum. | table | - | .1.3.6.1.4.1.4115.1.3.4.1.3.209.1 |
| arrisCmDoc30SpectrumNumberOfAverages This attribute controls the number of averages
that will be performed on spectral bins.
The average will be computed using the 'leaky integrator'
method, where:
repor… | scalar | Unsigned32 | .1.3.6.1.4.1.4115.1.3.4.1.3.209.10 |
| arrisCmDoc30SpectrumEnable This object is used to enable or disable the spectrum analyzer feature.
By default, the feature is disabled unless explicitly enabled.
Note that the feature may be disa… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.3.4.1.3.209.2 |
| arrisCmDoc30SpectrumInactivityTimeout This object controls the length of time after the last spectrum
analysis measurement before the feature is automatically disabled.
If set to a value of 0, the feature will remain… | scalar | seconds Integer32 | .1.3.6.1.4.1.4115.1.3.4.1.3.209.3 |
| arrisCmDoc30SpectrumFirstSegmentCenterFrequency This attribute controls the center frequency of the
first segment for the spectrum analysis measurement.
The frequency bins for this segment lie symmetrically
to the left an… | scalar | Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.1.3.4.1.3.209.4 |
| arrisCmDoc30SpectrumLastSegmentCenterFrequency This attribute controls the center frequency of
the last segment of the spectrum analysis measurement.
The frequency bins for this segment lie symmetrically
to th… | scalar | Hz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.1.3.4.1.3.209.5 |
| arrisCmDoc30SpectrumSegmentFrequencySpan This attribute controls the frequency span of each
segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable.
If set to a value of 0, then a default span wi… | scalar | Hz Unsigned32 | .1.3.6.1.4.1.4115.1.3.4.1.3.209.6 |
| arrisCmDoc30SpectrumEquivalentNoiseBandwidth This attribute allows the user to request an equivalent
noise bandwidth for the resolution bandwidth filter used
in the spectrum analysis. This corresponds to the
spectr… | scalar | hundredthsbin Unsigned32 | .1.3.6.1.4.1.4115.1.3.4.1.3.209.8 |
| arrisCmDoc30SpectrumWindowFunction This attribute controls or indicates the windowing function
which will be used when performing the discrete Fourier
transform for the analysis. The WindowFunction and the
… | scalar | SpectrumAnalysisWindowFunction | .1.3.6.1.4.1.4115.1.3.4.1.3.209.9 |