ARRIS-CM-DOC30-DEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
52

arrisCmDoc30SpectrumMeasurementTable

table
.1.3.6.1.4.1.4115.1.3.4.1.3.209.1 · 1 row entry · 3 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30SpectrumMeasurementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30SpectrumMeasurementTable' 
This table provides a list of spectral analysis measurements as 
performed across a range of center frequencies.  The table is capable
of representing a full scan of the spectrum.
arrisCmDoc30SpectrumMeasurementEntry row .1.3.6.1.4.1.4115.1.3.4.1.3.209.1.1
Each row in the arrisCmDoc30SpectrumMeasurementTable represents the
spectral analysis around a single center frequency point in the
spectrum.
Indexes
Column Syntax OID
arrisCmDoc30SpectrumFrequency
This object indicates the center frequency of the spectral anaysis
span which is represented by this entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.3.209.1.1.1
arrisCmDoc30SpectrumAmplitudeData
This object provides a list of the spectral amplitudes as measured at
the center frequency specified by arrisCmDoc30SpectrumFrequency.

The frequency bins are ordered from lowest to highest frequencies
c…
DOCS-IF3-MIBAmplitudeData
Type Constraints:
range: 0
range: 2..4116
 .1.3.6.1.4.1.4115.1.3.4.1.3.209.1.1.2
arrisCmDoc30SpectrumTotalSegmentPower
This attribute provides the total RF power present in the
segment with the center frequency equal to the Frequency index
and the span equal to the SegmentFrequencySpan. The value
represents the sum of the spectr…
DOCS-IF-MIBTenthdB .1.3.6.1.4.1.4115.1.3.4.1.3.209.1.1.3

arrisCmDoc30SwTable

table
.1.3.6.1.4.1.4115.1.3.4.1.5.1 · 1 row entry · 7 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30SwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30SwTable' 
This table contains all the MIB variables required for the
Touchstone Software Upgrade System.
arrisCmDoc30SwEntry row .1.3.6.1.4.1.4115.1.3.4.1.5.1.1
This table contains all the MIB variables required for the
Touchstone Software Upgrade System.
Indexes
Column Syntax OID
arrisCmDoc30SwIndex
Index used to order the arrisCmDoc30SwTable entries.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.4115.1.3.4.1.5.1.1.1
arrisCmDoc30SwCustomerLoadId
Custom string to identify Touchstone Software Upgrade
load lineups.
(OPTIONAL)
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.3.4.1.5.1.1.2
arrisCmDoc30SwHwModel
HW Model of Touchstone product to be downloaded.
(REQUIRED)
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.4115.1.3.4.1.5.1.1.3
arrisCmDoc30SwHwRev
HW Revision of Touchstone product to be downloaded.
(OPTIONAL)
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4115.1.3.4.1.5.1.1.4
arrisCmDoc30SwFilename
The file name of the Touchstone software image to be loaded
on to this device.
(REQUIRED)
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.3.4.1.5.1.1.5
arrisCmDoc30SwServerAddressType
The IP type (IPv4 or IPv6) of the TFTP server specified in
arrisCmDoc30SwServerAddress.
(REQUIRED)
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4115.1.3.4.1.5.1.1.6
arrisCmDoc30SwServerAddress
The IPv4 or IPv6 address of the TFTP server that will be used to
download the Touchstone software image. Note that before setting
this object, setting arrisCmDoc30SwServerAddressType to the
appropriate value is required…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.5.1.1.7

arrisCmDoc30EsafeFwTable

table
.1.3.6.1.4.1.4115.1.3.4.1.6.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30EsafeFwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30EsafeFwTable' 
This table contains all the MIB variables required to upgrade
Touchstone ESAFE devices.
arrisCmDoc30EsafeFwEntry row .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1
This table contains all the MIB variables required to upgrade
Touchstone ESAFE devices.
Indexes
Column Syntax OID
arrisCmDoc30EsafeFwDeviceIndex
Index used to order the arrisCmDoc30SwTable entries. Limited to 2 entries currently.
Expandable to 5 entries.
ESAFE Index:
1 - GW Firmware
2 - Application Processor Firmware
3 - Unused (inaccessible for n…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.1
arrisCmDoc30EsafeFwServerAddressType
The IP type (IPv4 or IPv6) of the TFTP server specified in
arrisCmDoc30EsafeFwServerAddress
(REQUIRED)
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.2
arrisCmDoc30EsafeFwServerAddress
The IPv4 or IPv6 address of the TFTP server that will be used to
download the Touchstone firmware image. Note that before setting
this object, setting arrisCmDoc30EsafeFwServerAddressType to the
appropriate value is req…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.3
arrisCmDoc30EsafeFwFilename
The file name of the Touchstone ESAFE firmware image to be loaded
on to this device.
(REQUIRED)
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.4
arrisCmDoc30EsafeFwAdminStatus
If set to upgradeFromMgt(1), the device will initiate a
TFTP firmware image download using arrisCmDoc30EsafeFwFilename
for the currently indexed esafe device in
arrisCmDoc30EsafeFwDeviceIndex.

If set…
Enumerationr/w
Enumerated Values:
1upgradeFromMgt
2allowProvisioningUpgrade
3ignoreProvisioningUpgrade
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.5
arrisCmDoc30EsafeFwOperStatus
InProgress(1) indicates that a TFTP download is
currently underway.

CompleteFromProvisioning(2) indicates that the last
firmware upgrade was a result of version mismatch at
provisioning.

Co…
Enumeration
Enumerated Values:
1inProgress
2completeFromProvisioning
3completeFromMgt
4failed
5other
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.6
arrisCmDoc30EsafeFwCurrentVers
The firmware version currently operating on this device.
This string's syntax is that used by the
individual vendor to identify firmware versions.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.7
arrisCmDoc30EsafeFwCurrentFilename
The filename of the eSAFE firmware currently operating on this device.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.8
arrisCmDoc30EsafeFwName
The name of this eSAFE device
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.3.4.1.6.1.1.1.9

arrisCmDoc30ResetReasonLogTable

table
.1.3.6.1.4.1.4115.1.3.4.1.7.2 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30ResetReasonLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30ResetReasonLogTable' 
This table contains the last 10 reset reasons.
arrisCmDoc30ResetReasonLogEntry row .1.3.6.1.4.1.4115.1.3.4.1.7.2.1
This table contains the last 10 reset reasons.
Indexes
Column Syntax OID
arrisCmDoc30ResetReasonLogIndex
Index used to report log reasons.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.4115.1.3.4.1.7.2.1.1
arrisCmDoc30ResetReasonLogText
The reported reset reason log text.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.4.1.7.2.1.2

arrisCmDoc30DhcpExtendedLeaseParametersTable

table
.1.3.6.1.4.1.4115.1.3.4.1.8.5 · 1 row entry · 7 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30DhcpExtendedLeaseParametersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30DhcpExtendedLeaseParametersTable' 
This table contains all the MIB variables required for 
showing the dhcp lease parameters.
arrisCmDoc30DhcpExtendedLeaseParametersEntry row .1.3.6.1.4.1.4115.1.3.4.1.8.5.1
This table contains all the MIB variables required for
showing the dhcp lease parameters.
Indexes
Column Syntax OID
arrisCmDoc30DhcpExtendedLeaseParametersIndex
Index used to order the arrisCmDoc30DhcpExtendedLeaseParametersTable entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.5.1.1
arrisCmDoc30DhcpExtendedLeaseParametersType
This mib displays the Dhcp Type(dhcpv4,dhcpv6)
Enumeration
Enumerated Values:
0dhcpv4
1dhcpv6
 .1.3.6.1.4.1.4115.1.3.4.1.8.5.1.2
arrisCmDoc30DhcpExtendedOfferedLeaseTime
This displays the Offered IP Lease time expressed in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.5.1.3
arrisCmDoc30DhcpExtendedTimeUntilRenew
This displays the current time remaining before the MTA starts the lease renewal
process. This time is expressed in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.5.1.4
arrisCmDoc30DhcpExtendedTimeUntilRebind
This displays the current time remaining before the CM starts the lease rebinding
process. This time is expressed in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.5.1.5
arrisCmDoc30DhcpExtendedLeaseTimeRemaining
This displays the Remaining IP Lease time expressed in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.5.1.6
arrisCmDoc30DhcpExtendedRenewLease
Set to apply(1) to renew the WAN(0) DHCP lease
Enumerationr/w
Enumerated Values:
0noApply
1apply
 .1.3.6.1.4.1.4115.1.3.4.1.8.5.1.7

arrisCmDoc30DhcpExtendedSvrParametersTable

table
.1.3.6.1.4.1.4115.1.3.4.1.8.6 · 1 row entry · 10 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30DhcpExtendedSvrParametersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30DhcpExtendedSvrParametersTable' 
This table contains all the MIB variables required for the
Dhcp Svr. Parameters.
arrisCmDoc30DhcpExtendedSvrParametersEntry row .1.3.6.1.4.1.4115.1.3.4.1.8.6.1
This table contains all the MIB variables required for the
Dhcp Svr. Parameters.
Indexes
Column Syntax OID
arrisCmDoc30DhcpExtendedSvrParametersIndex
Index used to order the arrisCmDoc30DhcpExtendedSvrParametersTable entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.1
arrisCmDoc30DhcpExtendedSvrParametersType
This mib displays the Dhcp Type(dhcpv4,dhcpv6).
Enumeration
Enumerated Values:
0dhcpv4
1dhcpv6
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.2
arrisCmDoc30DhcpExtendedState
This displays the current Dhcp state of the CM.
Enumeration
Enumerated Values:
0init-selecting
1requesting
2bound
3renewing
4rebinding
5init-reboot
6renew-requested
7released
8dhcp6c-init
9dhcp6c-solicit
10dhcp6c-inforeq
11dhcp6c-request
12dhcp6c-renew
13dhcp6c-rebind
14dhcp6c-release
15dhcp6c-decline
16dhcp6c-confirm
17dhcp6c-idle
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.3
arrisCmDoc30DhcpExtendedPrimaryDhcpServerIpAddr
This displays the primary Dhcp server address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.4
arrisCmDoc30DhcpExtendedTftpSvrIpAddr
This displays the current Tftp Server IP address in use.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.5
arrisCmDoc30DhcpExtendedTimeSvrIpAddr
This displays the current Time server IP address in use.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.6
arrisCmDoc30DhcpExtendedCmTimeOffset
This displays the current Time offset being used by the CM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.7
arrisCmDoc30DhcpExtendedPrimaryTeleDhcpSvr
This displays the primary MTA Dhcp server address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.8
arrisCmDoc30DhcpExtendedSecondaryTeleDhcpSvr
This displays the secondary MTA Dhcp server address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.9
arrisCmDoc30DhcpExtendedSrvDUIDV6
server DUID.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.4115.1.3.4.1.8.6.1.10

arrisCmDoc30DhcpExtendedCmParametersTable

table
.1.3.6.1.4.1.4115.1.3.4.1.8.7 · 1 row entry · 8 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30DhcpExtendedCmParametersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30DhcpExtendedCmParametersTable' 
This table contains all the MIB variables required for the
DHCP cm Parameters.
arrisCmDoc30DhcpExtendedCmParametersEntry row .1.3.6.1.4.1.4115.1.3.4.1.8.7.1
This table contains all the MIB variables required for the
DHCP cm Parameters.
Indexes
Column Syntax OID
arrisCmDoc30DhcpExtendedCmParametersIndex
Index used to order the arrisCmDoc30DhcpExtendedCmParametersTable entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.1
arrisCmDoc30DhcpExtendedCmParametersType
This mib displays the Dhcp Type(dhcpv4,dhcpv6).
Enumeration
Enumerated Values:
0dhcpv4
1dhcpv6
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.2
arrisCmDoc30DhcpExtendedCmIpAddr
This displays the currently leased IP address .
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.3
arrisCmDoc30DhcpExtendedCmSubNetMask
This displays the current IP subnet mask in use.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.4
arrisCmDoc30DhcpExtendedCmPrefix
This displays the current IP Prefix in use.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.5
arrisCmDoc30DhcpExtendedCmGatewayIpAddr
This displays the current IP gateway address in use.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.6
arrisCmDoc30DhcpExtendedCmConfigFile
This displays the CM configuration file to be retrived.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.7
arrisCmDoc30DhcpExtendedCmDUIDV6
CM DUID.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.4115.1.3.4.1.8.7.1.8

arrisCmDoc30DhcpExtendedDnsSvrTable

table
.1.3.6.1.4.1.4115.1.3.4.1.8.8 · 1 row entry · 3 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30DhcpExtendedDnsSvrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30DhcpExtendedDnsSvrTable' 
Table contains information for DNS Servers.
arrisCmDoc30DhcpExtendedDnsSvrEntry row .1.3.6.1.4.1.4115.1.3.4.1.8.8.1
Table contains information for DNS Servers.
Indexes
Column Syntax OID
arrisCmDoc30DhcpExtendedDnsSvrIPIndex
DNS Servers IP Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.3.4.1.8.8.1.1
arrisCmDoc30DhcpExtendedDnsSvrIPAddrType
This mib displays the Dhcp Type(dhcpv4,dhcpv6).
Enumeration
Enumerated Values:
0dhcpv4
1dhcpv6
 .1.3.6.1.4.1.4115.1.3.4.1.8.8.1.2
arrisCmDoc30DhcpExtendedDnsSvrIPAddr
IP address for DNS Servers.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.4.1.8.8.1.3

arrisCmDoc30IfUpstreamChannelExtendedTable

table
.1.3.6.1.4.1.4115.1.3.4.1.9.2 · 1 row entry · 3 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisCmDoc30IfUpstreamChannelExtendedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-CM-DOC30-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-CM-DOC30-DEVICE-MIB::arrisCmDoc30IfUpstreamChannelExtendedTable' 
This table Extends to describe the attributes of attached upstream
channels.
arrisCmDoc30IfUpstreamChannelExtendedEntry row .1.3.6.1.4.1.4115.1.3.4.1.9.2.1
Extended list of attributes for a single upstream channel, like
Symbol Rate, Modulation and so on.
Indexes
Column Syntax OID
arrisCmDoc30IfUpChannelExtendedId
The CMTS identification of the upstream channel.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4115.1.3.4.1.9.2.1.1
arrisCmDoc30IfUpChannelExtendedSymbolRate
The Symbol Rate in kSym/s of this upstream interface.
This object returns 0 if the interface symbol rate is
undefined or unknown.
Integer32
Constraints:
range: 0-160000
 .1.3.6.1.4.1.4115.1.3.4.1.9.2.1.2
arrisCmDoc30IfUpChannelExtendedModulation
The modulation type of this upstream interface, This object returns
err(-1) if the interface modulation is undefined or unknown.
Enumeration
Enumerated Values:
-1err
1qpsk
2qam8
3qam16
4qam32
5qam64
6qam128
7qam256
 .1.3.6.1.4.1.4115.1.3.4.1.9.2.1.3