cerveUdpBlockedPortTable

ARRIS-CER-VIDEO-MIB · .0.1.1.28

Object

table

A row in this table contains the a range of one or more UDP ports, where any ingress
UDP stream with a port in this range to any of the VE dataplane addresses must be
dropped. This table only applies to table-based VOD streams.

Context

MIB: ARRIS-CER-VIDEO-MIB
OID: .0.1.1.28
Type: table
Status: current
Parent: cerVideoObjects
Siblings: 30
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cerVideoControlGroup	node	-	`.0.1.1.1`
cerVideoStreamEsTable This table stores basic information for each Elementary Stream in each Transport Stream known to the E6000. Each entry in cerVideoProgTable will have at least one entry in this ta…	table	-	`.0.1.1.10`
cerVideoStreamDataEsTable This table stores basic information for each data-only Elementary Stream in each Transport Stream known to the E6000. For is one row for each ghost-pid, whether or not it is bein…	table	-	`.0.1.1.11`
cerVideoStreamDescTable This table stores MPEG Descriptors for each Elementary Stream and Program known to the E6000. The PMT PID is used to index Program Descriptors while the Elementary Stream PID is u…	table	-	`.0.1.1.12`
cerVideoQamJitterStatusTable This Table contains status information about the QAM dejitter buffers on a per-program basis. Entries in this table only persist for the life-time of the active programs, and are …	table	-	`.0.1.1.13`
cerVideoProgRemapTable This table displays the active Program mappings for Transport Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to support multiple output programs for each input program.	table	-	`.0.1.1.14`
cerVideoPidRemapTable This table displays the active PID mappings for Transport Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to support multiple output programs for each input program.	table	-	`.0.1.1.15`
cerVideoLookupTsMibIndexToIfIndexTable This table maps the TsIndex of an outgoing Transport Stream on a QAM channel to the ifIndex for that channel. The Transport Stream is assumed to be an 'outgoing' one.	table	-	`.0.1.1.17`
cerVideoLookupQamTsMibIndexToInTsMibIndexTable This table maps the TransportStreamIndex of a Transport Stream on a QAM channel to the corresponding incoming TransportStreamIndexes. cervTsMibIndex - an outgoing Transport St…	table	-	`.0.1.1.18`
cerVideoLookupTsMibIndexToUdpIpTable This table maps the TransportStreamIndex of an incoming Transport Stream to the IP address and UDP port for that Transport Stream.	table	-	`.0.1.1.19`
cerVideoQamStreamTable This table stores MPEG Video related data on a per QAM channel basis. Rows in this table are auto-created when a row of type dchannelVideo is created in the portTable. It is autod…	table	-	`.0.1.1.2`
cerVirtualEdgeTable This table stores parameters for each Virtual Edge video object.	table	-	`.0.1.1.20`
cerveStatusTable This table stores statistics for each Virtual Edge video object.	table	-	`.0.1.1.21`
cerveErmSrvDiscTable This table stores parameters for each Virtual Edge video ERM object, if defined.	table	-	`.0.1.1.22`
cerveErmD6StatTable This table stores ERM NGOD D6 statistics for each Virtual Edge video object. A row in this table is autocreated when a row in the cerveErmSvcDiscTable is Created and cervErmProtoc…	table	-	`.0.1.1.23`
cerveDataAddrMapTable This table contains the data plane addresses for the VE objects.	table	-	`.0.1.1.24`
cerveInputPortTable This table maps the session-based VOD input port number to a dataplane address.	table	-	`.0.1.1.25`
cerveUdpPortMapTable This table contains the blocks of UDP ports in a VE that are currently mapped to a Qam channel. This table is only used when cervePortMap is set to 8x8 or 10x6.	table	-	`.0.1.1.26`
cerveBandwidthTable This table describes the bandwidth on NSI links belonging to this virtual edge (for reporting To an ERM).	table	-	`.0.1.1.27`
cerErmSrvDiscTable This table describes the configuration parameters associated with remote Edge Resource Manager (ERM) devices. Use of multiple entries within this table enables the logical separa…	table	-	`.0.1.1.29`
cerVideoQamStreamStateTable This table provides MPEG Video status on a per QAM channel basis. Rows in this table are auto-created when a row of type dchannelVod, dchannelSdv, or dchannelBroadcast is created …	table	-	`.0.1.1.3`
cerStreamingZoneTable Table mapping a streaming zone index to a streaming zone name. Duplicate TSIDs must be in different SZs. Each VE is in one SZ.	table	-	`.0.1.1.30`
cerVideoCountsTable This table stores IEQ video counts for each DCAM.	table	-	`.0.1.1.31`
cerVideoTrapsInfo	node	-	`.0.1.1.32`
cerVideoNotifs	node	-	`.0.1.1.33`
cerVideoReplicaChanTable This Table contains one row for each replicated channel.	table	-	`.0.1.1.4`
cerveServiceGroupTable This table contains a mapping, per VE, of RF connectors to SG names.	table	-	`.0.1.1.5`
cerVideoUdpIpStreamTable This table displays the current incoming Transport Streams that are to be forwarded to an active QAM channel. Only streams being forwarded are in this table. Entries contain a r…	table	-	`.0.1.1.7`
cerVideoStreamTable This table stores basic information on all Transport Streams in the E6000. It covers both incoming and outgoing ones. The MPEG Manager automatically creates any entry in this tabl…	table	-	`.0.1.1.8`
cerVideoStreamProgramTable This table stores basic information for each Program in each Transport Stream known to the E6000. Each entry in cerVideoStreamTable will have at least one entry in this table.	table	-	`.0.1.1.9`

Child Objects