ARRIS-CER-VIDEO-MIB Table View

This table stores MPEG Video related data on a per QAM channel
basis. Rows in this table are auto-created when a row of type
dchannelVideo is created in the portTable. It is autodeleted 
when the row in the portTable is deleted.

cerVideoQamStreamEntry row .0.1.1.2.1

Video QAM channel configuration parameters

Indexes

IF-MIBifIndex

Column	Syntax	OID
cervQamTransportStreamID The MPEG transport_stream_id used when transmitting PAT tables on this QAM channel. All QAM streams in the same streaming zone must have a unique TSID value, unless cervControlAllowTsidDuplication is set to true. A uni…	Unsigned32r/w Constraints: range: 0-65535	.0.1.1.2.1.1
cervQamTsMibIndex The index of the outgoing Transport Stream on this QAM channel.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.2.1.2
cervQamPatInterval Retransmission interval for PAT tables in milliseconds. A value of zero means use the global value.	millisecondsUnsigned32r/w Constraints: range: 0-0 range: 50-2000	.0.1.1.2.1.3
cervQamPmtInterval Retransmission interval for PMT tables in milliseconds. A value of zero means use the global value.	millisecondsUnsigned32r/w Constraints: range: 0-0 range: 50-2000	.0.1.1.2.1.4
cervQamOverSubscriptionRecoveryEnabled If this is set to enabled, then the E6000 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most rec…	CerPerChanEnabler/w Type Values: 1 enabled 2 disabled 3 global	.0.1.1.2.1.5
cervQamPreEncDetect If this is set to enabled, then the E6000 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set to global, then the current value of cervControlPreEnc…	CerPerChanEnabler/w Type Values: 1 enabled 2 disabled 3 global	.0.1.1.2.1.6
cervQamOnProgConflictDropOld If this is set to enabled, if a new stream from a different source IP address maps to the same output QAM channel and program number as an existing stream, the newer stream will be forwarded, and the older stream will …	CerPerChanEnabler/w Type Values: 1 enabled 2 disabled 3 global	.0.1.1.2.1.7
cervQamServiceGroupName The name of the Service Group that this QAM channel is assigned to. A null string means the channel is not assigned to any Service Group.	OctetStringr/w Constraints: range: 0-32	.0.1.1.2.1.8
cervQamServiceGroupIndex The index for the Service Group, required for session-based ERMs. Zero means the channel is not assigned to a service group.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.0.1.1.2.1.9
cervQamVeqIndex The index of the Virtual Edge that this QAM channel is assigned to. This value must be provided when the row is created and cannot be updated.	CerVirtualEdgeIndexTyper/w Type Constraints: range: 0..8	.0.1.1.2.1.10
cervQamUdpBasePort This attribute is only used when cervePortMap is set to 8x8 or 10x6. The start of the UDP port range is assigned to this QAM channel for the purposes of routing video traffic to it. There will be 256 ports assigned when…	Unsigned32r/w Constraints: range: 0-65535	.0.1.1.2.1.11
cervQamJitterDepth The setting for jitter-buffer depth in milliseconds for video program streams on this channel. Can be set to a small value to reduce latency through the box, or set to a higher value to compensate for more jitter in the…	millisecondsInteger32r/w Constraints: range: -1-500	.0.1.1.2.1.12
cervQamUdpPortOffset The offset in the 256 UDP port block for the lowest numbered UDP port mapped to this channel. cervQamUdpPortOffset plus cervControlMaxProgramsPerQamChannel must be less than 257. Zero means uses the current global value…	Unsigned32r/w Constraints: range: 0-246	.0.1.1.2.1.13
cervQamClearCounters Always reads as false. Setting it to true clears all IEQ video counters related to this DS channel. Setting it to false has no effect.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.1.1.2.1.14
cervQamSubtype The type(s) of Ieq traffic to be carried over this QAM channel. Used for reporting config to ERM session managers. Linear is not yet supported. Channels cannot be used for video if the subtype is none.	CerIeqQamTyper/w Type Values: 1 vod 2 sdv 3 linear 4 vodsdv	.0.1.1.2.1.15

This table provides MPEG Video status on a per QAM channel
basis. Rows in this table are auto-created when a row of type
dchannelVod, dchannelSdv, or dchannelBroadcast is created in
the portTable. It is autodeleted when the row in the portTable
is deleted.

cerVideoQamStreamStateEntry row .0.1.1.3.1

Video QAM channel status

Indexes

No indexes recorded

Column	Syntax	OID
cervQamTotalPatsTx The total number of unique PAT Tables that have been generated for this QAM channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.3.1.1
cervQamTotalProgramsTx The accumulated number of Programs transmitted on this QAM channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.3.1.2
cervQamCurrentProgramsTx The number of Programs currently being transmitted on this QAM channel.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.3.1.3
cervQamPeakProgramsTx The peak number of Programs transmitted since the channel was activated.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.3.1.4
cervQamStreamStatus Current status of this QAM Transport stream	CerTransportStreamStatus Type Values: 1 active 2 timingOut 3 inactive	.0.1.1.3.1.5
cervQamTimeActivated The value of sysUpTime when this stream was last activated. Zero if not-applicable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.3.1.6
cervQamTimeActive The total time that MPEG stream has been active.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.3.1.7
cervQamTimeDeactivated The value of sysUpTime when this stream was last deactivated. Zero if not-known.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.3.1.8
cervQamOverSubscribed Indicates if the bandwidth of this QAM is currently over-subscribed (receiving more packets than can be transmitted). If the QAM is currently over-subscribed, some programs will suffer packet-loss. The affected progra…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.1.1.3.1.9
cervQamCurrentBandwidth For table-based VOD,the current bandwidth in use. For Session-based VOD and SDV, the total requested bandwidth.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.3.1.10
cervQamPeakBandwidth For table-based VOD,the peak bandwidth in use since the channel was activated. For session-based VOD and SDV, the peak requested bandwidth since the channel was activated.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.3.1.11

This Table contains one row for each replicated channel.

cerVideoReplicaChanEntry row .0.1.1.4.1

Video replicated channel configuration

Indexes

cervReplicaSourceIfIndex cervReplicatedIfIndex

Column	Syntax	OID
cervReplicaSourceIfIndex The ifIndex of the source (base) video channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.4.1.1
cervReplicatedIfIndex The ifIndex of the replicated channel associated with this source video channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.4.1.2
cervReplicaRowStatus The RowStatus for controlling entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.4.1.3

This table contains a mapping, per VE, of RF connectors to SG names.

cerveServiceGroupEntry row .0.1.1.5.1

Video service group configuration. A row in this table is created
when the first channel on an RF connector is assigned to a SG.
All channels on the same RF port (i.e., same slot and connector)
and in the same VE must …

Indexes

cerveIndex cerveServiceGroupSlot cerveServiceGroupConnector

Column	Syntax	OID
cerveServiceGroupSlot The card slot plus one of the channel in this service group.	Unsigned32 Constraints: range: 1-6 range: 9-14	.0.1.1.5.1.2
cerveServiceGroupConnector The DS connector number plus one of the channel in this service group. Only 1..8 is legal for first generation DCAM.	Unsigned32 Constraints: range: 1-16	.0.1.1.5.1.3
cerveServiceGroupName The name of the video Service Group.	OctetString Constraints: range: 0-32	.0.1.1.5.1.4
cerveServiceGroupIndex The index number for the SG, required for session-based ERMs. Set by assigning a SG index to a channel on this RF connector.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.5.1.5

This table displays the current incoming Transport Streams that
are to be forwarded to an active QAM channel. 
Only streams being forwarded are in this table. 
Entries contain a reference to either a specific QAM channel
or to a channel-container. While not needed for uniqueness, the
VE index is a key to allow us to easily find all streams in a VE.

cerVideoUdpIpStreamEntry row .0.1.1.7.1

Indexes

cerveIndex cervUdpIpDestIpAddr cervUdpIpDestUdpPort cervUdpIpSrcIpAddr

Column	Syntax	OID
cervUdpIpDestIpAddr The DEST IP address of the incoming TS being mapped to the specified QAM Channel.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.7.1.2
cervUdpIpDestUdpPort The destination UDP Port of the incoming TS being mapped to the specified QAM Channel.	Unsigned32 Constraints: range: 1-65535	.0.1.1.7.1.3
cervUdpIpSrcIpAddr The SRC IP address of the incoming TS being mapped to the specified QAM Channel.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.7.1.4
cervUdpIpStreamStatus The status of this stream.	CerTransportStreamStatus Type Values: 1 active 2 timingOut 3 inactive	.0.1.1.7.1.5
cervUdpIpTsMibIndex The index of the entry in the cerVideoStreamTable corresponding to this table entry.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.7.1.6
cervUdpIpActiveQamIfIndex The ifIndex of the table-based QAM channel that this stream is currently mapped to. This is zero if the input stream is session-based and therefore is mapped to a channel container. Only one of cervUdpIpActiveQamIfInde…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.0.1.1.7.1.7
cervUdpIpTimeActivated The value of sysUpTime when this stream was last activated. Zero if not-applicable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.7.1.8
cervUdpIpTimeActive The total time that the stream has been active.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.7.1.9
cervUdpIpTimeDeactivated The value of sysUpTime when this stream was last deactivated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.7.1.10
cervUdpIpPacketCount The number of UDP packets received for this stream.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.0.1.1.7.1.11
cervUdpIpBadSyncCount The number of ingress MPEG frames (TSPs)without the MPEG Sync byte. Since there can be multiple MPEG frames per UDP packet, this count could be higher than cervUdpIpPacketCount.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.7.1.12
cervUdpIpChanContainer The channel container for this session-based input stream. This is zero if the input stream is mapped using table-based VOD. Only one of cervUdpIpActiveQamIfIndex and cervUdpIpChanContainer is set for any single input …	Unsigned32 Constraints: range: 0-65535	.0.1.1.7.1.13
cervUdpIpPidPassthruEnable Whether or not to remap the PIDs in this stream. True means no remap.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.1.1.7.1.14
cervUdpIpAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.7.1.15
cervUdpIpStreamType If dynamic, then a message to the session ERM is needed if the stream fails.	CerStreamType Type Values: 1 static 2 dynamic 3 redundant	.0.1.1.7.1.16

This table stores basic information on all Transport Streams
in the E6000. It covers both incoming and outgoing ones. The MPEG
Manager automatically creates any entry in this table when it
detects a new incoming TS or begins to generate a new outgoing
TS.

cerVideoStreamEntry row .0.1.1.8.1

Video stream status table

Indexes

cervStreamDirectionIndex cervStreamTsMibIndex

Column	Syntax	OID
cervStreamDirectionIndex The direction of this Transport Stream.	CerTransportStreamDirection Type Values: 1 incoming 2 outgoing	.0.1.1.8.1.1
cervStreamTsMibIndex The unique index that identifies the Transport Stream within the E6000.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.8.1.2
cervStreamPatVersion The version number of the current PAT Table for this Transport Stream.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.8.1.3
cervStreamTsID The MPEG transport_stream_id in the PAT tables on this Transport Stream.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.8.1.4
cervStreamProgramCount The number of Programs currently in this Transport Stream.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.8.1.5
cervStreamPatCurrTimeCreated The value of sysUpTime when the current PAT was created. Zero if not-applicable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.8.1.6
cervStreamPatCurrTimeActive The total time the current PAT has been active.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.8.1.7
cervStreamPatPrevTimeCreated The value of sysUpTime when the predecessor of this PAT was created. Zero if not-known.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.8.1.8
cervStreamProgramFilteredCount The number of Programs currently being filtered from this Transport Stream.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.8.1.9
cervStreamPidCount The total number of PIDs used by this Transport Stream. It is the sum of all Program cervStreamProgEsCount + PMT PIDs + ECM PIDs (if present) + PCR PIDs (if different) + ghost PIDs (if present).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.8.1.10
cervStreamTspCount The total number of MPEG Transport Stream Packets sent/received on this stream.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.0.1.1.8.1.11
cervStreamDroppedTspCount The total number of MPEG Transport Stream Packets dropped on this stream.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.8.1.12

This table stores basic information for each Program in each
Transport Stream known to the E6000. Each entry in
cerVideoStreamTable will have at least one entry in this table.

cerVideoStreamProgramEntry row .0.1.1.9.1

Video program status table

Indexes

cervStreamProgTsMibIndex cervStreamProgIndex

Column	Syntax	OID
cervStreamProgTsMibIndex The unique index that identifies the Transport Stream containing this Program.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.9.1.1
cervStreamProgIndex The Program Number for this program within the associated Transport Stream.	CerProgram	.0.1.1.9.1.2
cervStreamProgPmtVersion The version number of the current PMT Table for this Program.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.9.1.3
cervStreamProgPmtPid The MPEG PID used for the PMT Table for this Program.	CerPID Type Constraints: range: 0..8191	.0.1.1.9.1.4
cervStreamProgEcmPid The MPEG PID used to for the ECM Table for this Program. This is set to 0 in the program is unencrypted.	CerPID Type Constraints: range: 0..8191	.0.1.1.9.1.5
cervStreamProgPcrPid The MPEG PID used to for the PCR for this Program.	CerPID Type Constraints: range: 0..8191	.0.1.1.9.1.6
cervStreamProgEsCount The number of Elementary Streams currently in this Program.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.9.1.7
cervStreamProgDescCount The number of Descriptors in the PMT 'first_loop' for this Program.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.9.1.8
cervStreamPmtCurrTimeCreated The value of sysUpTime when the current PMT was created. Zero if not-applicable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.9.1.9
cervStreamPmtCurrTimeActive The total time the current PMT has been active.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.9.1.10
cervStreamPmtPrevTimeCreated The value of sysUpTime when the predecessor of this PMT was created. Zero if not-known.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.9.1.11
cervStreamProgBitrate The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.9.1.12
cervStreamProgPidFilteredCnt The number of PIDs currently being filtered from this Program.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.9.1.13
cervStreamProgContinuityErrCnt The continuity-counter errors seen on PIDs in this Program	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.9.1.14

This table stores basic information for each Elementary Stream
in each Transport Stream known to the E6000. Each entry in
cerVideoProgTable will have at least one entry in this table.
These entries are created automatically as the E6000 processes PMT
table entries for each Elementary Stream in a Program

cerVideoStreamEsEntry row .0.1.1.10.1

Elementary stream status table

Indexes

cervStreamEsTsMibIndex cervStreamEsProgIndex cervStreamEsPidIndex

Column	Syntax	OID
cervStreamEsTsMibIndex The unique index that identifies the Transport Stream containing this Program.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.10.1.1
cervStreamEsProgIndex The Program Number for the program containing this ES.	CerProgram	.0.1.1.10.1.2
cervStreamEsPidIndex The MPEG PID used for this Elementary Stream.	CerPID Type Constraints: range: 0..8191	.0.1.1.10.1.3
cervStreamEsType The type of this Elementary Streams.	CerElementaryStreamType Type Constraints: range: 1..255	.0.1.1.10.1.4
cervStreamEsDescCount The number of Descriptors in the PMT 'second_loop' for this Elementary Stream.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.10.1.5
cervStreamEsContinuityErrCnt The continuity-counter errors seen on this PID.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.10.1.6
cervStreamEsTspCount The number of MPEG frames (TSPs) seen on this PID.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.10.1.7

This table stores basic information for each data-only Elementary 
Stream in each Transport Stream known to the E6000. For is one row
for each ghost-pid, whether or not it is being forwarded.

cerVideoStreamDataEsEntry row .0.1.1.11.1

Data-only Elementary stream status table.

Indexes

cervStreamDataEsTsMibIndex cervStreamDataEsPidIndex

Column	Syntax	OID
cervStreamDataEsTsMibIndex The unique index that identifies the Transport Stream containing this Program.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.11.1.1
cervStreamDataEsPidIndex The MPEG PID used for this Elementary Stream.	CerPID Type Constraints: range: 0..8191	.0.1.1.11.1.2
cervStreamDataEsIsGhostPid True if this is a ghost PID. False if it is an si-stream PID (not supported yet).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.1.1.11.1.3
cervStreamDataEsForwarding True is we are forwarding this PID. False if we are dropping it.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.1.1.11.1.4
cervStreamDataEsContinuityErrCnt The continuity-counter errors seen on this PID.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.11.1.5

This table stores MPEG Descriptors for each Elementary Stream
and Program known to the E6000. The PMT PID is used to index
Program Descriptors while the Elementary Stream PID is used
when indexing ES Descriptors.

cerVideoStreamDescEntry row .0.1.1.12.1

Video stream descriptor table

Indexes

cervStreamDescTsMibIndex cervStreamDescPidIndex cervStreamDescIndex

Column	Syntax	OID
cervStreamDescTsMibIndex The unique index that identifies the Transport Stream containing this Descriptor.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.12.1.1
cervStreamDescPidIndex The MPEG PID used for this Elementary Stream.	CerPID Type Constraints: range: 0..8191	.0.1.1.12.1.2
cervStreamDescIndex The Descriptor index.	CerDescriptorIndex Type Constraints: range: 1..65535	.0.1.1.12.1.3
cervStreamDescTag The Descriptor tag.	CerDescriptorTag Type Constraints: range: 1..255	.0.1.1.12.1.4
cervStreamDescLen The Descriptor length.	Integer32 Constraints: range: 1-255	.0.1.1.12.1.5
cervStreamDescData The Descriptor data.	CerDescriptorBuffer Type Constraints: range: 0..255	.0.1.1.12.1.6

This Table contains status information about the QAM dejitter
buffers on a per-program basis. Entries in this table only
persist for the life-time of the active programs, and are
created & deleted on the fly as programs are shutdown &
restarted.

cerVideoQamJitterStatusEntry row .0.1.1.13.1

Video Qam Jitter Status table

Indexes

cervQamJitterStatusIfIndex cervQamJitterStatusProgNumber

Column	Syntax	OID
cervQamJitterStatusIfIndex The ifIndex of the QAM channel associated with this entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.13.1.1
cervQamJitterStatusProgNumber The output program number associated with this entry.	CerProgram	.0.1.1.13.1.2
cervQamJitterStatusCurrStatus The status of the jitter buffer for this program. idle - waiting for input TS packets init - transmitting TS packets at nominal rate, not locked to incoming PCR active - normal passing traffic, locked…	Enumeration Enumerated Values: 1 idle 2 init 3 active 4 freeRunning	.0.1.1.13.1.3
cervQamJitterStatusUnderflowCnt Number of times the jitter buffer has underflowed during the lifetime of this program.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.13.1.4
cervQamJitterStatusOverflowCnt Number of times the jitter buffer has overflowed during the lifetime of this program.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.13.1.5
cervQamJitterStatusBufLength The current size of the jitter buffer for this program in milliseconds.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.13.1.6
cervQamJitterStatusPcrJitter The estimate of the current network jitter.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.13.1.7
cervQamJitterStatusPcrCnt The total number of PCR samples processed in this program.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.13.1.8
cervQamJitterStatusPcrDiscontinuityCnt The total number of PCR discontinuities observed in this program.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.13.1.9
cervQamJitterStatusBufDepth The initial jitter-buffer depth in milliseconds for this program stream. May have been dynamically set via R6 NGOD interface.	millisecondsUnsigned32 Constraints: range: 0-500	.0.1.1.13.1.10

This table displays the active Program mappings for Transport
Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to
support multiple output programs for each input program.

cerVideoProgRemapEntry row .0.1.1.14.1

Program to transport stream mapping table

Indexes

cervProgRemapTsMibIndex cervProgRemapInProgIndex cervProgRemapActiveQamIfIndex cervProgRemapOutProg

Column	Syntax	OID
cervProgRemapTsMibIndex The TS Mib Index of the incoming TS.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.14.1.1
cervProgRemapInProgIndex The incoming Program value related to this Program remapping.	CerProgram	.0.1.1.14.1.2
cervProgRemapActiveQamIfIndex The ifIndex of the QAM channel that this Program remapping applies to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.14.1.3
cervProgRemapOutProg The output Program value related to this Program mapping rule.	CerProgram	.0.1.1.14.1.4
cervProgRemapTimeActivated The value of sysUpTime when this Program was last activated. Zero if not-applicable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.14.1.5
cervProgRemapTimeActive The total time that the Program has been active.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.14.1.6

This table displays the active PID mappings for Transport
Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to
support multiple output programs for each input program.

cerVideoPidRemapEntry row .0.1.1.15.1

PID to transport stream mapping table

Indexes

cervPidRemapTsMibIndex cervPidRemapInPidIndex cervPidRemapActiveQamIfIndex cervPidRemapOutPid

Column	Syntax	OID
cervPidRemapTsMibIndex The TS Mib Index of the incoming TS.	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.15.1.1
cervPidRemapInPidIndex The incoming PID value related to this PID remapping.	CerPID Type Constraints: range: 0..8191	.0.1.1.15.1.2
cervPidRemapActiveQamIfIndex The ifIndex of the QAM channel that this PID remapping applies to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.15.1.3
cervPidRemapOutPid The output PID value related to this PID mapping rule.	CerPID Type Constraints: range: 0..8191	.0.1.1.15.1.4
cervPidRemapActivePidType The type of PID whether PSI or Elementary stream.	CerPidType Type Values: 1 es 2 psi 3 ghost	.0.1.1.15.1.5
cervPidRemapTimeActivated The value of sysUpTime when this PID was last activated. Zero if not-applicable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.15.1.6
cervPidRemapTimeActive The total time that the PID has been active.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.15.1.7

This table maps the TsIndex of an outgoing Transport Stream on
a QAM channel to the ifIndex for that channel. The Transport
Stream is assumed to be an 'outgoing' one.

cerVideoLookupTsMibIndexToIfIndexEntry row .0.1.1.17.1

TSID to QAM channel mapping table

Indexes

cervQamTsMibIndex

Column	Syntax	OID
cervLookupTsIndexIfIndex The ifIndex for the QAM channel transmitting this TransportStreamIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.17.1.1

This table maps the TransportStreamIndex of a Transport Stream
on a QAM channel to the corresponding incoming
TransportStreamIndexes.
  cervTsMibIndex   - an outgoing Transport Stream
  cervInTsMibIndex - the corresponding incoming Transport
                    Stream.

cerVideoLookupQamTsMibIndexToInTsMibIndexEntry row .0.1.1.18.1

TSID to incoming transport stream mapping table

Indexes

cervQamTsMibIndex cervLookupInTsMibIndex

Column	Syntax	OID
cervLookupInTsMibIndex MIB TsIndex for an incoming transport stream(IP).	CerTransportStreamIndex Type Constraints: range: 1..1073741823	.0.1.1.18.1.1

This table maps the TransportStreamIndex of an incoming
Transport Stream to the IP address and UDP port for that
Transport Stream.

cerVideoLookupTsMibIndexToUdpIpEntry row .0.1.1.19.1

TSID to IP address and port mapping table

Indexes

cervUdpIpTsMibIndex

Column	Syntax	OID
cervLookupTsMibIndexUdpPort The UDP receiving the Transport Stream for TransportStreamIndex.	Unsigned32 Constraints: range: 1-65535	.0.1.1.19.1.1
cervLookupTsMibIndexIpAddrDest The DEST IP address receiving the Transport Stream for TransportStreamIndex.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.19.1.2
cervLookupTsMibIndexIpAddrSrc The SRC IP address receiving the Transport Stream for TransportStreamIndex.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.19.1.3
cervLookupTsMibIndexAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.19.1.4
cervLookupTsMibIndexVe The VE for this TsMibIndex.	CerVirtualEdgeIndexType Type Constraints: range: 0..8	.0.1.1.19.1.5

This table stores parameters for each Virtual Edge video object.

cerVirtualEdgeEntry row .0.1.1.20.1

Virtual Edge configuration parameter table

Indexes

cerveIndex

Column	Syntax	OID
cerveIndex The index of the Virtual Edge. Although not officially supported, allow a VE for each of 12 DCAMs.	CerVirtualEdgeIndexType Type Constraints: range: 0..8	.0.1.1.20.1.1
cerveName This is the name of the Virtual Edge.	OctetStringr/w Constraints: range: 0-64	.0.1.1.20.1.2
cervePortMap Only 8x8 and session is currently supported. Ignored for sdv-only channels. Manual mapping, where individual streams manually configured to map to channela in this VE are forwarded, may in the future be supported in ad…	CerUdpPortMapTyper/w Type Values: 1 map8x8 2 map10x6 3 session	.0.1.1.20.1.3
cerveSzIndex Index of Streaming Zone used by this Virtual Edge. Multiple Virtual Edges may have the same SZ. Zero means unassigned.	Unsigned32r/w Constraints: range: 0-7	.0.1.1.20.1.4
cerveGlobal Whether or not this VE spans all DCAMs. Can only be set when the row is created.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.1.1.20.1.5
cerveAdminState Setting the VE AdminState to down blocks all video traffic to all video channels in the VE. It also takes down any ERM connection to the VE. It does not change the channel state of the channels in the VE.	CADANT-TCAdminStater/w Type Values: 1 up 2 down	.0.1.1.20.1.6
cerveRowStatus The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.20.1.7

This table stores statistics for each Virtual Edge video object.

cerveStatusEntry row .0.1.1.21.1

Virtual Edge statistics table.

Indexes

No indexes recorded

Column	Syntax	OID
cerveStatusDroppedPkts Number of incoming UDP packets to one of this VE's data plane addresses whose DPORT was not currently valid and was therefore dropped by the NPU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.21.1.2
cerveStatusBlockedPkts Number of incoming UDP packets whose DPORT was in the valid subrange, but whose DPORT was on the blocked list, so the packet was dropped by the NPU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.21.1.3
cerveStatusFragmentedPkts Number of incoming UDP packets with a valid DIP and DPORT, but were dropped by the NPU because they were fragmented.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.21.1.4
cerveStatusOperStatus Whether the VE is operationally IS or OOS. It is IS if any channel in the VE is IS.	Enumeration Enumerated Values: 1 is 2 oos	.0.1.1.21.1.7

This table stores parameters for each Virtual Edge video ERM object, if defined.

cerveErmSrvDiscEntry row .0.1.1.22.1

Virtual Edge ERM configuration parameter table

Indexes

cerveIndex

Column	Syntax	OID
cerveErmSrvDiscErmIndex This is the ERM used for this Virtual Edge. Multiple VEs may use same ERM. Zero means unassigned.	Integer32r/w Constraints: range: 0-7	.0.1.1.22.1.2
cerveErmSrvDiscComponentName The ERM component name used on the service discovery interface, which is unique per VE.	OctetStringr/w Constraints: range: 0-64	.0.1.1.22.1.3
cerveErmSrvDiscAdminState Whether or not the VE servicediscovery interface is enabled.	CADANT-TCAdminStater/w Type Values: 1 up 2 down	.0.1.1.22.1.4
cerveErmSrvDiscControlIpAddr This is the source loopback address used when communicating with the ERM and for receiving messages from the ERM.	CADANT-TCInetAddressIPv4or6r/w Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.22.1.5
cerveErmSrvDiscAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.22.1.6
cerveErmSrvDiscControlIfIndex The ifIndex of the loopback interface for communicating with an ERM.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.0.1.1.22.1.7
cerveErmSrvDiscRowStatus The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.22.1.8

This table stores ERM NGOD D6 statistics for each Virtual Edge video object.
A row in this table is autocreated when a row in the cerveErmSvcDiscTable is
Created and cervErmProtocol is set to ngod. Another status table would be
added in the future when we support cervErmProtocol nmi.

cerveErmD6StatEntry row .0.1.1.23.1

Virtual Edge ERM statistics table.

Indexes

cerveIndex

Column	Syntax	OID
cerveErmD6StatTcpConnSuccess Number of successful TCP connections to ERM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.2
cerveErmD6StatTcpConnFail Number of failed attempts to create a TCP connection to the ERM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.3
cerveErmD6StatVrepEstablishTime Timestamp when last VREP Establish state was reached with ERM.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.0.1.1.23.1.4
cerveErmD6StatVrepOpenSent Number of VREP OPEN messages sent to ERM	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.5
cerveErmD6StatVrepOpenRcvd Number of VREP OPEN messages received from ERM	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.6
cerveErmD6StatUpdsSent Number of VREP UPDATE messages sent to ERM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.7
cerveErmD6StatUpdsRcvd Number of VREP UPDATE messages received from ERM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.8
cerveErmD6StatVrepKeepAliveSent Number of Keep Alive messages sent to ERM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.9
cerveErmD6StatVrepKeepAliveRcvd Number of Keep Alive messages received from ERM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.10
cerveErmD6StatRemoteSzName Contains the Streaming Zone name from the ERM.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.1.1.23.1.11
cerveErmD6StatRemoteCompName Contains the component name from the ERM.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.1.1.23.1.12
cerveErmD6StatRemoteVrepId Contains VREP ID at the ERM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.13
cerveErmD6StatRemoteVrepVersion Contains VREP version at the ERM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.14
cerveErmD6StatRemoteVrepRoutes Contains the number of active routes from the ERM for this VE.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.0.1.1.23.1.15
cerveErmD6StatRemoteHoldTime Contains VREP/DRRP hold-time in seconds from the ERM for connection timeout. Zero means do not time-out.	secondsUnsigned32 Constraints: range: 0-65535	.0.1.1.23.1.16
cerveErmD6StatVrepStatus The current state of the VREP state machine (the D6 TCP connection to the ERM).	Enumeration Enumerated Values: 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established	.0.1.1.23.1.17

This table contains the data plane addresses for the VE objects.

cerveDataAddrMapEntry row .0.1.1.24.1

Dataplane IP addresses to virtual edge mapping table

Indexes

cerveIndex cerveDataAddrMapIpAddr

Column	Syntax	OID
cerveDataAddrMapIpAddr This a data plane address for the VE. All UDP packets to this address are port-mapped.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.24.1.2
cerveDataAddrMapAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.24.1.3
cerveDataAddrMapIfIndex The ifIndex of the loopback interface used to assign the dataplane address.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.0.1.1.24.1.4
cerveDataAddrMapEdgeInputGrp The edge input group for reporting to RAMSDEN.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.1.1.24.1.5
cerveDataAddrMapErmInputPort The input port number used by the ERM for session-based VOD port mapping. Zero means no value is set.	Unsigned32r/w Constraints: range: 0-6	.0.1.1.24.1.6
cerveDataAddrMapRowStatus The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.24.1.7

This table maps the session-based VOD input port number to a dataplane address.

cerveInputPortEntry row .0.1.1.25.1

Input port number to a dataplane address mapping table

Indexes

cerveIndex cerveInputPortErmInputPort

Column	Syntax	OID
cerveInputPortErmInputPort The input port number used by the ERM for session-based VOD port mapping. Zero means no value is set.	Unsigned32 Constraints: range: 0-20	.0.1.1.25.1.2
cerveInputPortIpAddr This a data plane address for the VE. All UDP packets to this address are port-mapped.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.25.1.3
cerveInputPortAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.25.1.4

This table contains the blocks of UDP ports in a VE that are currently mapped to a 
Qam channel. This table is only used when cervePortMap is set to 8x8 or 10x6.

cerveUdpPortMapEntry row .0.1.1.26.1

UDP port to QAM channel mapping table

Indexes

cerveIndex cerveUdpPortMapUdpBasePort

Column	Syntax	OID
cerveUdpPortMapUdpBasePort This is the lowest port number in the block of UDP ports mapped to this QAM channel. The total number of UDP ports in this block depends on the type of port map used for this VE; if the map is type map8x8, then there ar…	Unsigned32 Constraints: range: 0-65535	.0.1.1.26.1.2
cerveUdpPortMapQamIfIndex This is the ifIndex of the QAM channel to which this block of UDP ports maps. Is unique among all rows in the table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.26.1.3

This table describes the bandwidth on NSI links belonging to this virtual edge 
(for reporting To an ERM).

cerveBandwidthEntry row .0.1.1.27.1

Bandwidth allocation configuration for a virtual edge

Indexes

cerveIndex cerveBandIpAddr cerveBandIfIndex

Column	Syntax	OID
cerveBandIpAddr This a data plane address for the Virtual Edge being assigned this bandwidth. Must be an address already assigned to the VE.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.27.1.2
cerveBandIfIndex This is the ifIndex of the ethernet or link-aggregate interface for the interface whose bandwidth is being assigned to this VE.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.1.1.27.1.3
cerveBandAllocation The amount of bandwidth in Kbps of the NSI interface to be reported for the VE over the service discovery ERM connection.	KbpsUnsigned32r/w Constraints: range: 0-100000000	.0.1.1.27.1.4
cerveBandAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.27.1.5
cerveBandRowStatus The RowStatus for controlling entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.27.1.6

A row in this table contains the a range of one or more UDP ports, where any ingress
UDP stream with a port in this range to any of the VE dataplane addresses must be 
dropped. This table only applies to table-based VOD streams.

cerveUdpBlockedPortEntry row .0.1.1.28.1

Blocked UDP port mapping for a virtual edge

Indexes

cerveIndex cerveUdpBlockedPortIpAddr cerveUdpBlockedPortLowPort

Column	Syntax	OID
cerveUdpBlockedPortIpAddr This a data plane address for the Virtual Edge where the UDP is being blocked. Must be an address already assigned to the VE or 0.0.0.0, which means that the port is blocked for every VE dataplane address.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.28.1.2
cerveUdpBlockedPortLowPort This is the low port number to be blocked for the VE.	Unsigned32 Constraints: range: 1-65535	.0.1.1.28.1.3
cerveUdpBlockedPortHighPort This is the high port number to be blocked. Is same as low port if only a one port range.	Unsigned32r/w Constraints: range: 1-65535	.0.1.1.28.1.4
cerveUdpBlockedPortAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.28.1.5
cerveUdpBlockedPortRowStatus The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.28.1.6

This table describes the configuration parameters 
associated with remote Edge Resource Manager (ERM)
devices. Use of multiple entries within this table
enables the logical separation of the Cer to multiple
ERMs.

cerErmSrvDiscEntry row .0.1.1.29.1

An entry corresponds to an individual ERM configuration.

Indexes

cerErmSrvDiscIndex

Column	Syntax	OID
cerErmSrvDiscIndex Index of ERM configuration entry.	Integer32 Constraints: range: 1-7	.0.1.1.29.1.1
cerErmSrvDiscName Name of ERM configuration entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.1.1.29.1.2
cerErmSrvDiscDescription Contains text description of the ERM configuration.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.1.1.29.1.3
cerErmSrvDiscAddrType Type of IP address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.1.1.29.1.4
cerErmSrvDiscRemoteIpAddr The ERM remote address. An IPv4 address or hostname is acceptable as an address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.0.1.1.29.1.5
cerErmSrvDiscRemoteFqdnIpAddr The IP address for an FQDN in cerErmRemoteIpName. This is 0.0.0.0 if cerErmSrvDiscRemoteIpAddr is an IPv4 address.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.0.1.1.29.1.6
cerErmSrvDiscPort Contains TCP port value used for DRRP listener/connections.	Unsigned32r/w Constraints: range: 1024-65535	.0.1.1.29.1.7
cerErmSrvDiscHoldTime Contains VREP/DRRP hold-time in seconds for connection timeout	Unsigned32r/w Constraints: range: 4-65535	.0.1.1.29.1.8
cerErmSrvDiscKeepAliveTime Contains VREP/DRRP interval in seconds for sending keep-alive messages. Must be less than cerErmHoldTime.	Unsigned32r/w Constraints: range: 3-65535	.0.1.1.29.1.9
cerErmSrvDiscBwInterval Interval in seconds to send AvailableBandwidth UDPATE messages. Zero means no reporting of bandwidth.	secondsUnsigned32r/w Constraints: range: 0-65535	.0.1.1.29.1.10
cerErmSrvDiscBwThreshold Change in bandwith utilisation in Kbps required to trigger an AvailableBandwidth UDPATE messages.	Unsigned32r/w Constraints: range: 50-65535	.0.1.1.29.1.11
cerErmSrvDiscCost Cost to advertise in VREP OPEN message.	Unsigned32r/w Constraints: range: 0-65535	.0.1.1.29.1.12
cerErmSrvDiscConnRetryTimeout The maximum time to wait before retrying establishing the ERM connection.	secondsUnsigned32r/w Constraints: range: 30-600	.0.1.1.29.1.13
cerErmSrvDiscRowStatus The values that control the creation/deletion of ERMs on the CER.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.29.1.14

Table mapping a streaming zone index to a streaming zone name.
Duplicate TSIDs must be in different SZs. Each VE is in one SZ.

cerStreamingZoneEntry row .0.1.1.30.1

Table mapping a streaming zone index to a streaming zone name.

Indexes

cervSzIndex

Column	Syntax	OID
cervSzIndex MIB Index for a streaming zone.	Unsigned32 Constraints: range: 1-7	.0.1.1.30.1.1
cervSzQamNetworkId Network ID for a streaming zone. Must be unique for all streaming zones. Zero means not set.	Unsigned32r/w Constraints: range: 0-65535	.0.1.1.30.1.2
cervSzName Configured name of the streaming zone.	OctetStringr/w Constraints: range: 0-32	.0.1.1.30.1.3
cervSzVpmeSdIndex The security-domain instance number uniquely identifies the VPME instance for the E6000. Zero means no SD is assigned.	Unsigned32r/w Constraints: range: 0-7	.0.1.1.30.1.4
cervSzRowStatus The values that control the creation/deletion of streaming zones on the CER.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.1.1.30.1.5

This table stores IEQ video counts for each DCAM.

cerVideoCountsEntry row .0.1.1.31.1

IEQ Video counts per DCAM.

Indexes

cerVideoCountsCardId

Column	Syntax	OID
cerVideoCountsCardId This the slot number of DCAM doing the counts.	Integer32 Constraints: range: 1-6 range: 9-14	.0.1.1.31.1.1
cerVideoCountsBadSyncPkts Number of incoming port-mapped UDP packets dropped because of not containing valid MPEG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.31.1.2
cerVideoCountsDroppedPkts Number of valid incoming MPEG packets that were were dropped by the DCAM because of a program number conflict, oversubscription condition, or MPTS pass-thru conflict.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.31.1.3
cerVideoCountsFragments Number of multicast packet fragments dropped in the DCAM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.0.1.1.31.1.4