cervQamVeqIndex
ARRIS-CER-VIDEO-MIB ·
.0.1.1.2.1.10
Object
column
r/w
CerVirtualEdgeIndexType
The index of the Virtual Edge that this QAM channel is assigned to. This value must be provided when the row is created and cannot be updated.
Context
- MIB
- ARRIS-CER-VIDEO-MIB
- OID
.0.1.1.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cerVideoQamStreamEntry
- Table
- cerVideoQamStreamTable
- Siblings
- 14
Syntax
CerVirtualEdgeIndexType
- Source
- CerVirtualEdgeIndexType
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cervQamTransportStreamID The MPEG transport_stream_id used when transmitting PAT
tables on this QAM channel. All QAM streams in the
same streaming zone must have a unique TSID value, unless
cervControlAl… | column | Unsigned32 | .0.1.1.2.1.1 |
| cervQamUdpBasePort This attribute is only used when cervePortMap is set to 8x8 or 10x6.
The start of the UDP port range is assigned to this QAM channel for the purposes
of routing video traffic to i… | column | Unsigned32 | .0.1.1.2.1.11 |
| cervQamJitterDepth The setting for jitter-buffer depth in milliseconds for
video program streams on this channel.
Can be set to a small value to reduce latency through the
box, or set to a higher va… | column | milliseconds Integer32 | .0.1.1.2.1.12 |
| cervQamUdpPortOffset The offset in the 256 UDP port block for the lowest numbered UDP port mapped
to this channel. cervQamUdpPortOffset plus cervControlMaxProgramsPerQamChannel
must be less than 257. … | column | Unsigned32 | .0.1.1.2.1.13 |
| cervQamClearCounters Always reads as false. Setting it to true clears all IEQ video counters
related to this DS channel. Setting it to false has no effect. | column | SNMPv2-TCTruthValue | .0.1.1.2.1.14 |
| cervQamSubtype The type(s) of Ieq traffic to be carried over this QAM channel.
Used for reporting config to ERM session managers. Linear is not
yet supported. Channels cannot be used for video i… | column | CerIeqQamType | .0.1.1.2.1.15 |
| cervQamTsMibIndex The index of the outgoing Transport Stream on this QAM
channel. | column | CerTransportStreamIndex | .0.1.1.2.1.2 |
| cervQamPatInterval Retransmission interval for PAT tables in milliseconds. A value of zero
means use the global value. | column | milliseconds Unsigned32 | .0.1.1.2.1.3 |
| cervQamPmtInterval Retransmission interval for PMT tables in milliseconds. A value of zero
means use the global value. | column | milliseconds Unsigned32 | .0.1.1.2.1.4 |
| cervQamOverSubscriptionRecoveryEnabled If this is set to enabled, then the E6000 will attempt to
recover automatically from a QAM-overscribed condition by
shutting down active programs selectively. It selects
which pr… | column | CerPerChanEnable | .0.1.1.2.1.5 |
| cervQamPreEncDetect If this is set to enabled, then the E6000 will detect Motorola
pre-encrypted streams, and will avoid re-encrypting the
traffic when forwarding it downstream. If set to global, the… | column | CerPerChanEnable | .0.1.1.2.1.6 |
| cervQamOnProgConflictDropOld If this is set to enabled, if a new stream from a different
source IP address maps to the same output QAM channel
and program number as an existing stream, the newer stream
will … | column | CerPerChanEnable | .0.1.1.2.1.7 |
| cervQamServiceGroupName The name of the Service Group that this QAM channel is assigned to.
A null string means the channel is not assigned to any Service Group. | column | OctetString | .0.1.1.2.1.8 |
| cervQamServiceGroupIndex The index for the Service Group, required for session-based ERMs.
Zero means the channel is not assigned to a service group. | column | SNMPv2-SMIUnsigned32 | .0.1.1.2.1.9 |