cervQamOverSubscriptionRecoveryEnabled

ARRIS-CER-VIDEO-MIB · .0.1.1.2.1.5
MIB view Table view

Object

column r/w CerPerChanEnable 
If this is set to enabled, then the E6000 will attempt to
recover automatically from a QAM-overscribed condition by
shutting down active programs selectively.  It selects
which programs to shut down by order of most recently
activated, checks the new bitrates, then continues to
shutdown more programs as neccessary untill the total
bandwidth fits within the QAM available bandwidth.
If set to disabled, packets are discarded randomly.
If set to global, then the current value of 
cervControlOverSubscriptionRecovery is used.

Context

MIB
ARRIS-CER-VIDEO-MIB
OID
.0.1.1.2.1.5
Type
column
Access
readwrite
Status
current
Parent
cerVideoQamStreamEntry
Table
cerVideoQamStreamTable
Siblings
14

Syntax

CerPerChanEnable
Source
CerPerChanEnable
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled
3global

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cervQamTransportStreamID
The MPEG transport_stream_id used when transmitting PAT tables on this QAM channel. All QAM streams in the same streaming zone must have a unique TSID value, unless cervControlAl…
columnUnsigned32.0.1.1.2.1.1
cervQamVeqIndex
The index of the Virtual Edge that this QAM channel is assigned to. This value must be provided when the row is created and cannot be updated.
columnCerVirtualEdgeIndexType.0.1.1.2.1.10
cervQamUdpBasePort
This attribute is only used when cervePortMap is set to 8x8 or 10x6. The start of the UDP port range is assigned to this QAM channel for the purposes of routing video traffic to i…
columnUnsigned32.0.1.1.2.1.11
cervQamJitterDepth
The setting for jitter-buffer depth in milliseconds for video program streams on this channel. Can be set to a small value to reduce latency through the box, or set to a higher va…
columnmilliseconds Integer32.0.1.1.2.1.12
cervQamUdpPortOffset
The offset in the 256 UDP port block for the lowest numbered UDP port mapped to this channel. cervQamUdpPortOffset plus cervControlMaxProgramsPerQamChannel must be less than 257. …
columnUnsigned32.0.1.1.2.1.13
cervQamClearCounters
Always reads as false. Setting it to true clears all IEQ video counters related to this DS channel. Setting it to false has no effect.
columnSNMPv2-TCTruthValue.0.1.1.2.1.14
cervQamSubtype
The type(s) of Ieq traffic to be carried over this QAM channel. Used for reporting config to ERM session managers. Linear is not yet supported. Channels cannot be used for video i…
columnCerIeqQamType.0.1.1.2.1.15
cervQamTsMibIndex
The index of the outgoing Transport Stream on this QAM channel.
columnCerTransportStreamIndex.0.1.1.2.1.2
cervQamPatInterval
Retransmission interval for PAT tables in milliseconds. A value of zero means use the global value.
columnmilliseconds Unsigned32.0.1.1.2.1.3
cervQamPmtInterval
Retransmission interval for PMT tables in milliseconds. A value of zero means use the global value.
columnmilliseconds Unsigned32.0.1.1.2.1.4
cervQamPreEncDetect
If this is set to enabled, then the E6000 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set to global, the…
columnCerPerChanEnable.0.1.1.2.1.6
cervQamOnProgConflictDropOld
If this is set to enabled, if a new stream from a different source IP address maps to the same output QAM channel and program number as an existing stream, the newer stream will …
columnCerPerChanEnable.0.1.1.2.1.7
cervQamServiceGroupName
The name of the Service Group that this QAM channel is assigned to. A null string means the channel is not assigned to any Service Group.
columnOctetString.0.1.1.2.1.8
cervQamServiceGroupIndex
The index for the Service Group, required for session-based ERMs. Zero means the channel is not assigned to a service group.
columnSNMPv2-SMIUnsigned32.0.1.1.2.1.9