issAclUserDefinedFilterInPortList

ARICENT-ISS-ACL-MIB · .1.3.6.1.4.1.29601.2.21.4.1.1.8

MIB view Table view

Object

column r/w PortList

This object specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list. Filter will be applied in
chip when port list is not null.
If the In port list is '0', the filter rule will not be installed in hardware.
By default inport list is maintained as '0'.

Context

MIB: ARICENT-ISS-ACL-MIB
OID: .1.3.6.1.4.1.29601.2.21.4.1.1.8
Type: column
Access: readwrite
Status: current
Parent: issAclUserDefinedFilterEntry
Table: issAclUserDefinedFilterTable
Siblings: 15

Syntax

PortList

Source: PortList
Base type: OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
issAclUserDefinedFilterId This object specifies an Index to uniquely identify the User defined filter table entry.	column	IndexInteger	`.1.3.6.1.4.1.29601.2.21.4.1.1.1`
issAclUserDefinedFilterIdOne This Object specifies the ID of the Base ACL rule 1 (MAC-based or IP-based) that is used for deriving new ACL rule.	column	Unsigned32	`.1.3.6.1.4.1.29601.2.21.4.1.1.10`
issAclUserDefinedFilterIdTwoType This Object specifies the type of the Base ACL rule 2 that is used for deriving new ACL rule.	column	Enumeration	`.1.3.6.1.4.1.29601.2.21.4.1.1.11`
issAclUserDefinedFilterIdTwo This Object specifies the ID of the Base ACL rule 2 (MAC-based or IP-based) that is used for deriving new ACL rule.	column	Unsigned32	`.1.3.6.1.4.1.29601.2.21.4.1.1.12`
issAclUserDefinedFilterSubAction This object specifies the action that is to be taken on the incoming packet is detailed below - none - no action modifyVlan - Traffic matching ACL rule will have VLAN ID cla…	column	Enumeration	`.1.3.6.1.4.1.29601.2.21.4.1.1.13`
issAclUserDefinedFilterSubActionId Id to be used if the object as specified by issAclUserDefinedFilterSubAction is either modifyvlan or nestedvlan only. Non-Zero value need to be specify when issAclUserDefinedFilt…	column	Integer32	`.1.3.6.1.4.1.29601.2.21.4.1.1.14`
issAclUserDefinedFilterRedirectId This object specifies the redirect index associated with UserDefinedFilter entry.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.29601.2.21.4.1.1.15`
issAclUserDefinedFilterStatus This object speifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of thi…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.29601.2.21.4.1.1.16`
issAclUserDefinedFilterPktType This object specifies the type of packet for which packet-filter match needs to be applied on incoming traffic.	column	Enumeration	`.1.3.6.1.4.1.29601.2.21.4.1.1.2`
issAclUserDefinedFilterOffSetBase This object specifies the offset base from the start of packet header ( beginning of full packet) for which the match needs to be applied on incoming traffic. A value of 0 indica…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.29601.2.21.4.1.1.3`
issAclUserDefinedFilterOffSetValue This object specifies the offset value for which packet-filter match needs to be applied on incoming traffic. A value of zero indicates that this field is dont-care. The offset va…	column	OctetString	`.1.3.6.1.4.1.29601.2.21.4.1.1.4`
issAclUserDefinedFilterOffSetMask This object specifies the mask for the offset value. The actual user defined value to be used for matching incoming traffic is obtained after ANDing the OffsetValue and OffsetMask…	column	OctetString	`.1.3.6.1.4.1.29601.2.21.4.1.1.5`
issAclUserDefinedFilterPriority This object specifies the priority of the filter that can be used to decide which filter rule is applicable when --> the packet matches with more than one filter rules --> …	column	Integer32	`.1.3.6.1.4.1.29601.2.21.4.1.1.6`
issAclUserDefinedFilterAction Action value allow/drop/redirect specify the action to be taken on the packet if the filter rule matches. --> If the action is 'allow', the packet will be sent to the port…	column	Enumeration	`.1.3.6.1.4.1.29601.2.21.4.1.1.7`
issAclUserDefinedFilterIdOneType This Object specifies the type of the Base ACL rule 1 that is used for deriving new ACL rule.	column	Enumeration	`.1.3.6.1.4.1.29601.2.21.4.1.1.9`