issAclL2FilterNo
ARICENT-ISS-ACL-MIB ·
.1.3.6.1.4.1.29601.2.21.2.1.1.1
Object
column
Integer32
This object specifies the L2 Filter rule number.
Context
- MIB
- ARICENT-ISS-ACL-MIB
- OID
.1.3.6.1.4.1.29601.2.21.2.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- issAclL2FilterEntry
- Table
- issAclL2FilterTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| issAclL2FilterMatchCount This object specifies the number of times this filter is matched. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.21.2.1.1.10 |
| issAclL2FilterStatus This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.21.2.1.1.11 |
| issAclL2FilterOutPortList This object specifies the complete set of ports over which this filter is applied
for packets egress at Ports in this list.
If the Out port list is '0', the filter rule is applica… | column | PortList | .1.3.6.1.4.1.29601.2.21.2.1.1.12 |
| issAclL2FilterDirection This object specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction.
When the direction of this filter is 'in', It is appl… | column | Enumeration | .1.3.6.1.4.1.29601.2.21.2.1.1.13 |
| issAclL2FilterSubAction This object specifies that the action to be taken on the incoming packet is detailed below -
none - no action
modifyVlan - Traffic matching ACL rule will have VLAN ID
… | column | Enumeration | .1.3.6.1.4.1.29601.2.21.2.1.1.14 |
| issAclL2FilterSubActionId This object specifies that the Id to be used if the object as specified by
issAclL2FilterSubAction is either modifyvlan or nestedvlan only.
Non-Zero value need to be specify when… | column | Integer32 | .1.3.6.1.4.1.29601.2.21.2.1.1.15 |
| issAclL2FilterRedirectId This object specifies the redirect index associated with L2Filter entry. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.21.2.1.1.16 |
| issAclL2NextFilterNo This object specifies that the Next Filter rule number to be matched for traffic matching
the current ACL rule | column | Integer32 | .1.3.6.1.4.1.29601.2.21.2.1.1.17 |
| issAclL2NextFilterType This object specifies the type of the next access-control list.
The type could take the value 'l2filter' for MAC-based ACLs and 'l3filter' for IP-based ACLs.
It takes the value … | column | Enumeration | .1.3.6.1.4.1.29601.2.21.2.1.1.18 |
| issAclL2FilterCfiDeiBit This object specifies the CfiDei bit value in the c-vlan tag or s-vlan tag of
the packet to be applied in the filter. | column | Enumeration | .1.3.6.1.4.1.29601.2.21.2.1.1.19 |
| issAclL2FilterPriority This object specifies the priority of the L2 filter can be used to decide which filter rule
is applicable when
--> the packet matches with more than one filter rules
--> Al… | column | Integer32 | .1.3.6.1.4.1.29601.2.21.2.1.1.2 |
| issAclL2FilterDP This object specifies the drop precedence level to be applied in the filter. | column | Enumeration | .1.3.6.1.4.1.29601.2.21.2.1.1.20 |
| issAclL2FilterRestore This object stores the order of PCL index while storing
the configurations. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.29601.2.21.2.1.1.21 |
| issAclL2FilterDstMacAddrMask This object specifies that the mask used to match the Destination MAC address with the packet. By Default, the Destination
Mac Address Mask will be ff:ff:ff:ff:ff:ff which means… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.21.2.1.1.22 |
| issAclL2FilterSrcMacAddrMask This object specifies that the mask used to match the Source MAC address with the packet. By Default, the Source
Mac Address Mask will be ff:ff:ff:ff:ff:ff which means macth exa… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.21.2.1.1.23 |
| issAclL2FilterEtherType This object specifies the value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0'. When this object is SET with… | column | Integer32 | .1.3.6.1.4.1.29601.2.21.2.1.1.3 |
| issAclL2FilterProtocolType This object specifies the non IP protocol type to be filtered.
aarp | amber | dec-spanning | decnet-iv |
diagnostic | dsm |etype-6000 | etype-8042 |
lat | lavc-sca | mop-console… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.21.2.1.1.4 |
| issAclL2FilterDstMacAddr This object specifies that the Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero which means dont care condition ie)
any … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.21.2.1.1.5 |
| issAclL2FilterSrcMacAddr This object specifies that the Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero which means dont care condition ie) any Src Mac
… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.21.2.1.1.6 |
| issAclL2FilterVlanId This object specifies that the Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id.
A value of '0' means, this object is unused.… | column | Integer32 | .1.3.6.1.4.1.29601.2.21.2.1.1.7 |
| issAclL2FilterInPortList This object specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
If the In port list is '0', the filter rule will not b… | column | PortList | .1.3.6.1.4.1.29601.2.21.2.1.1.8 |
| issAclL2FilterAction This object specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If… | column | Enumeration | .1.3.6.1.4.1.29601.2.21.2.1.1.9 |