fsIcclSessionInterface

ARICENT-ICCH-MIB · .1.3.6.1.4.1.29601.2.94.4.1.1.2
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
This object is used to specify the  port to be used 
for ICCH TCP/IP Communication . This value is read from iccl.conf
file. ICCH interface is a manually aggregated, high bandwidth link
to co-ordinate the control information and data exchange of 
Multi-chassis LAG. Inter-Chassis Communication Handler Interface 
is a trunk port. MAC learning will be disabled on this port. 
However, MAC addresses learnt on the remote MC-LAG node can be 
installed in the local node, with ICCL interface as the destination
port. Spanning tree will be disabled always on ICCL interface to 
make sure the ICCL is always in forwarding state. When this object 
is configured, the iccl.conf file is updated automatically and 
the value will take effect in ISS on next reboot. This ICCL
inerface should be a port-channel interface

Context

MIB
ARICENT-ICCH-MIB
OID
.1.3.6.1.4.1.29601.2.94.4.1.1.2
Type
column
Access
readwrite
Status
current
Parent
fsIcclSessionEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ICCH-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ICCH-MIB::fsIcclSessionInterface'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ARICENT-ICCH-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ICCH-MIB::fsIcclSessionInterface.<fsIcclSessionInstanceId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ARICENT-ICCH-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ARICENT-ICCH-MIB::fsIcclSessionInterface'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255