ARICENT-ICCH-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
7
fsIcclSessionTable
table
.1.3.6.1.4.1.29601.2.94.4.1
·
1 row entry
·
7 columns
Uses the aricent variant from
Command help
/opt/observium/mibs/aricent.
Walk fsIcclSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARICENT-ICCH-MIB' -M '/opt/observium/mibs/aricent:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARICENT-ICCH-MIB::fsIcclSessionTable'
This table is used to access the stored ICCL information
This object specifies the ICCL information entry of a session
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This object specifies an unique value, that identifies ICCL instance.
|
Unsigned32 Constraints: range: 0-10 |
.1.3.6.1.4.1.29601.2.94.4.1.1.1 |
||||||||||||
|
This object is used to specify the port to be used
for ICCH TCP/IP Communication . This value is read from iccl.conf file. ICCH interface is a manually aggregated, high bandwidth link to co-ordinate the control inform… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.29601.2.94.4.1.1.2 |
||||||||||||
|
This object is used to specify the IP Address to be used
for ICCH TCP /IP communication . This IP address corresponds to the Layer 3 interface that will be created over the fsIcchInterface. This value is read from icc… |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.29601.2.94.4.1.1.3 |
||||||||||||
|
This object is used to specify the Subnet Mask to be
associated withIP Address to be used for ICCH TCP /IP communication. Configuring this object will result in an update to iccl.conf file. The configu… |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.29601.2.94.4.1.1.4 |
||||||||||||
|
This object specifies the VLAN ID to be used for ICCH
TCP /IP communication. Configuring this object will result in an update to iccl.conf file. The configured value will take effect in ISS on next reboot. |
Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.29601.2.94.4.1.1.5 |
||||||||||||
|
This object specifies the state of the node. The state of the
node is decided after election by heart beat module. Election is based on the fsIcchIpAddress. |
FsIcchState Type Values:
|
.1.3.6.1.4.1.29601.2.94.4.1.1.6 |
||||||||||||
|
This object specifies the row status of ICCH session table entry.
Only 'CreateAndGo' and 'destroy' values are allowed for this object. The value 'CreateAndGo' adds the entry to iccl.conf and 'destroy' de… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.29601.2.94.4.1.1.7 |
