appnNodeHprSupport
APPN-MIB ·
.1.3.6.1.2.1.34.4.1.1.1.8
Object
scalar
Enumeration
Indicates this node's level of support for high-performance
routing (HPR):
noHprSupport(1) - no HPR support
hprBaseOnly(2) - HPR base (option set 1400)
supported
rtpTower(3) - HPR base and RTP tower
(option set 1401) supported
controlFlowsOverRtpTower(4) - HPR base, RTP tower, and
control flows over RTP
(option set 1402) supported
This object corresponds to cv4580, byte 9, bits 3-4.
Context
- MIB
- APPN-MIB
- OID
.1.3.6.1.2.1.34.4.1.1.1.8- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- appnGeneralInfoAndCaps
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noHprSupport |
2 | hprBaseOnly |
3 | rtpTower |
4 | controlFlowsOverRtpTower |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| appnNodeCpName Administratively assigned network name for this node. | scalar | SnaControlPointName | .1.3.6.1.2.1.34.4.1.1.1.1 |
| appnNodeHprIntRteSetups The total number of HPR route setups received for routes
passing through this node since the node was last
reinitialized. | scalar | AppnNodeCounter | .1.3.6.1.2.1.34.4.1.1.1.10 |
| appnNodeHprIntRteRejects The number of HPR route setups rejected by this node for
routes passing through it since the node was last
reinitialized. | scalar | AppnNodeCounter | .1.3.6.1.2.1.34.4.1.1.1.11 |
| appnNodeHprOrgRteSetups The total number of HPR route setups sent for routes
originating in this node since the node was last
reinitialized. | scalar | AppnNodeCounter | .1.3.6.1.2.1.34.4.1.1.1.12 |
| appnNodeHprOrgRteRejects The number of HPR route setups rejected by other nodes for
routes originating in this node since the node was last
reinitialized. | scalar | AppnNodeCounter | .1.3.6.1.2.1.34.4.1.1.1.13 |
| appnNodeHprEndRteSetups The total number of HPR route setups received for routes
ending in this node since the node was last reinitialized. | scalar | AppnNodeCounter | .1.3.6.1.2.1.34.4.1.1.1.14 |
| appnNodeHprEndRteRejects The number of HPR route setups rejected by this node for
routes ending in it since the node was last reinitialized. | scalar | AppnNodeCounter | .1.3.6.1.2.1.34.4.1.1.1.15 |
| appnNodeCounterDisconTime The value of the sysUpTime object the last time the APPN node
was reinitialized. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.34.4.1.1.1.16 |
| appnNodeLsCounterType Indicates which ANR traffic, if any, the node includes in the
counts returned by the APPN link station counters
appnLsInXidBytes, appnLsInMsgBytes, appnLsInXidFrames,
appnLsInMsgF… | scalar | Enumeration | .1.3.6.1.2.1.34.4.1.1.1.17 |
| appnNodeBrNn Indicates whether this node is currently configured as a
branch network node.
Note: throughout the remainder of this MIB module, branch
network node is treated as a th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.1.18 |
| appnNodeMibVersion deprecated The value of LAST-UPDATED from this module's MODULE-IDENTITY
macro. This object gives a Management Station an easy way of
determining the level of the MIB supported by an agent.
… | scalar | OctetString | .1.3.6.1.2.1.34.4.1.1.1.2 |
| appnNodeId This node's Node Identification, which it sends in bytes
2-5 of XID. | scalar | SnaNodeIdentification | .1.3.6.1.2.1.34.4.1.1.1.3 |
| appnNodeType Type of APPN node:
networkNode(1) - APPN network node
endNode(2) - APPN end node
t21len(4) - LEN end node
Note: A branch network node SHALL return … | scalar | Enumeration | .1.3.6.1.2.1.34.4.1.1.1.4 |
| appnNodeUpTime Amount of time (in hundredths of a second) since the APPN node
was last reinitialized. | scalar | hundredths of a second SNMPv2-SMITimeTicks | .1.3.6.1.2.1.34.4.1.1.1.5 |
| appnNodeParallelTg Indicates whether this node supports parallel TGs. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.1.6 |
| appnNodeAdaptiveBindPacing Indicates whether this node supports adaptive bind pacing for
dependent LUs. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.1.7 |
| appnNodeMaxSessPerRtpConn This object represents a configuration parameter indicating
the maximum number of sessions that the APPN node is to put on
any HPR connection. The value is zero if not applicable. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.4.1.1.1.9 |