aluRS232Speed

aluRS232Speed specifies the link speed of the Serial interface.
A value of 'speed1200' sets the link to 1200bps. A value of 'speed64k'
sets the link to 64kbps.
              
Valid values depend on tmnxMDAAssignedType : 
sdiv1 : 600, 1200, 2400, 4800, 9600, 19200, 38400, 56000,
        64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
        1280k, 1408k, 1536k, 1664k, 1792k, 1920k
sdiv2 : 600, 1200, 2400, 4800, 9600, 19200, 38400, 56000,
        57600, 115200
        64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
        1280k, 1408k, 1536k, 1664k, 1792k, 1920k
sdiv3 : <all speeds>
              
On the SAR-H and SAR-Hc systems, valid values are the same as sdiv2.
              
Valid values also depend on aluRS232Type : 
rs232 : 600, 1200, 2400, 4800, 9600, 16000, 19200, 38400, 56000,
        57600, 115200
        64k (sdiv3 only)
v35   : 64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
        1280k, 1408k, 1536k, 1664k, 1792k, 1920k, 2048k
x21   : 1200, 2400, 4800, 9600, 19200, 38400, 56000,
        64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k,
        1280k, 1408k, 1536k, 1664k, 1792k, 1920k, 2048k
rs530 : <all speeds except 57600 and 115200>
              
Valid values also depend on aluRS232DeviceMode :
synchronous  : <all speeds except 57600 and 115200>
asynchronous : 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
               115200
              
Valid values also depend on the sub-channel:
(none)                 : <no additional restrictions>
aluRS232ChanGroupEntry : <all speeds except 57600 and 115200>
aluRS232SocketEntry    : <asynchronous speeds only>
              
High Capacity Multiplexing (HCM) is supported on
aluRS232ChanGroupEntry only, running at subrate speed:
hcm   : 600, 1200, 2400, 4800, 9600, 16000, 19200, 38400, 56000
              
Valid values also depend on aluRS232ControlLeadXxx :
high       : <no additional restrictions>
low        : <no additional restrictions>
end-to-end : <HCM speeds only; rs530 exempt>
              
Valid values also depend on aluRS232MultiDrop :
disabled   : <no additional restrictions>
slave      : <HCM speeds only>
master     : <HCM speeds only>
              
Default values depend on aluRS232Type :
rs232 : 9600
v35   : 64k
x21   : 64k
rs530 : 64k

MIB

ALU-PORT-MIB

OID

.1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.7

Type

column

Access

readwrite

Status

current

Parent

aluRS232Entry