agPortCurCfgFastEthMode
ALTEON-CHEETAH-SWITCH-MIB ·
.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.9
Object
column
Enumeration
This object is used to select port mode for fast Ethernet connection.
Context
- MIB
- ALTEON-CHEETAH-SWITCH-MIB
- OID
.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- agPortCurCfgTableEntry
- Table
- agPortCurCfgTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | full-duplex |
3 | half-duplex |
4 | full-or-half-duplex |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agPortCurCfgIndx The index of the row in port configurations table.
Note: This mib is only supported in VX instance of Virtualization. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.1 |
| agPortCurCfgFastEthFctl Selects the port flow control for fast Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.10 |
| agPortCurCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.11 |
| agPortCurCfgGigEthFctl This object is used to select port flow control for
gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.12 |
| agPortCurCfgPortName The switch port name. | column | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.13 |
| agPortCurCfgBwmContract The switch port Bandwidth Management contract number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.14 |
| agPortCurCfgDiscardNonIPs Enable or disable to discard all non-IP traffic on the switch port. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.15 |
| agPortCurCfgLinkTrap Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not… | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.16 |
| agPortCurCfgPreferred This object is used to set the preferred port. Valid only on dual ports. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.17 |
| agPortCurCfgBackup This object is used to set the backup port. Valid only on dual ports. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.18 |
| agPortCurCfgEgressBW The configured egress bandwidth limit for this port. This is the
maximum egress bandwidth available to this port if BWM is on. | column | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.19 |
| agPortCurCfgState This is the state of the port. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.2 |
| agPortCurCfgNonIPBwmContract The BWM contract for non-IP traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.20 |
| agPortCurCfgGigEthSpeed Selects the port speed for Gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.21 |
| agPortCurCfgGigEthMode This object is used to select port mode for Gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.22 |
| agPortCurCfgPortAlias The switch port alias. | column | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.24 |
| agPortCurCfgVlanTag This is VLAN tag state of the port | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.3 |
| agPortCurCfgRmon This object is used to turn RMON on or off on the port. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.5 |
| agPortCurCfgPVID The default VLAN ID for the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.6 |
| agPortCurCfgFastEthAutoNeg This object is used to turn the autonegotiation on or off
for fast Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.7 |
| agPortCurCfgFastEthSpeed Selects the port speed for fast Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.8 |