ALTEON-CHEETAH-SWITCH-MIB Table View

The table of TCP services listen for health check in the current config block.

agCurCfgHcTcpPortTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.1.80.1.1

A row in the table of TCP services listen for health check.

Indexes

agCurCfgHcTcpPortIndx

Column	Syntax	OID
agCurCfgHcTcpPortIndx The Health check TCP Services table index.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.1872.2.5.1.1.1.80.1.1.1
agCurCfgHcTcpPortNum The TCP Port number which listen for health check.	Integer32 Constraints: range: 2-65535	.1.3.6.1.4.1.1872.2.5.1.1.1.80.1.1.2

The table of TCP services listen for health check in the new config block.

agNewCfgHcTcpPortTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1

A row in the table of TCP services listen for health check.

Indexes

agNewCfgHcTcpPortIndx

Column	Syntax	OID
agNewCfgHcTcpPortIndx The Health check TCP Services table index.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1.1
agNewCfgHcTcpPortNum The TCP Port number which listen for health check.	Integer32r/w Constraints: range: 2-65535	.1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1.2
agNewCfgHcTcpPortNumDelete When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1.3

The table of ADC Software Images

agImageAdcEntry row .1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1

A row in the ADC Software Image table

Indexes

agImageAdcIndex

Column	Syntax	OID
agImageAdcIndex The ADC Software Image ID	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.1
agImageAdcVersion The ADC Software Image Version	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.2
agImageAdcDownloadTime The ADC Software Image Download Time	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.3
agImageAdcAssignedVadcs List of vadc ids that will use this image on reboot	OctetStringr/w	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.4
agImageAdcStatus The ADC Software Image status	Enumeration Enumerated Values: 0 idle 1 active 2 assigned 3 incompatible	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.5
agImageAdcAdd Add VADc to use this Software Image (whwre 0 is No Operation)	Integer32r/w Constraints: range: 0-28	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.6
agImageAdcRemove Remove VADc from using this Software Image (whwre 0 is No Operation)	Integer32r/w Constraints: range: 0-28	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.7
agImageAdcBmap Bitmap of vadc that will use this image on reboot	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.8
agImageAdcDefault Set the image as default image.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.9
agImageAdcFvStatus Get the FastView Status.	Enumeration Enumerated Values: 1 compressed 2 extracted 3 na	.1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.10

The table of ADC-VX Software Images

agImageVxEntry row .1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1

A row in the ADC-VX Software Image table

Indexes

agImageVxIndex

Column	Syntax	OID
agImageVxIndex The ADC-VX Software Image ID	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.1
agImageVxVersion The ADC-VX Software Image Version	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.2
agImageVxDownloadTime The ADC-VX Software Image Download Time	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.3
agImageVxStatus The ADC-VX Software Image status	Enumeration Enumerated Values: 0 idle 1 active	.1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.4

Associated ip table of for AWS ha.
Note: This MIB is only supported on VA platform.

agAwsCurCfgAssociatedIpTableIdEntry row .1.3.6.1.4.1.1872.2.5.1.1.1.201.4.1

A row in AWS ha associated ip table..
Note: This MIB is only supported on VA platform.

Indexes

agAwsCurCfgAssociatedIpIndex

Column	Syntax	OID
agAwsCurCfgAssociatedIpIndex AWS HA associated ip table index.. Note: This MIB is only supported on VA platform.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.1.201.4.1.1
agAwsCurCfgAssociatedIpPrivateIp Get AWS Alteon private IP, as a part of HA associated IP set. Note: This MIB is only supported on VA platform.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.1.201.4.1.2
agAwsCurCfgAssociatedIpPeerIp Get AWS Alteon bachup(s) IP, as a part of HA associated IP set. Note: This MIB is only supported on VA platform.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.1.201.4.1.3
agAwsCurCfgAssociatedIpFloatingIp Get AWS Alteon floating/elastic IP, as a part of HA associated IP set. Note: This MIB is only supported on VA platform.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.1.201.4.1.4

Associated ip table of for AWS ha.
Note: This MIB is only supported on VA platform.

agAwsNewCfgAssociatedIpTableIdEntry row .1.3.6.1.4.1.1872.2.5.1.1.1.201.7.1

A row in AWS ha associated ip table.
Note: This MIB is only supported on VA platform.

Indexes

agAwsNewCfgAssociatedIpIndex

Column	Syntax	OID
agAwsNewCfgAssociatedIpIndex AWS ha associated ip table index. Note: This MIB is only supported on VA platform.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.1.201.7.1.1
agAwsNewCfgAssociatedIpPrivateIp Set AWS Alteon private IP, as a part of HA associated IP set. Note: This MIB is only supported on VA platform.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.1.201.7.1.2
agAwsNewCfgAssociatedIpPeerIp Set AWS Alteon bachup(s) IP, as a part of HA associated IP set. Note: This MIB is only supported on VA platform.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.1.201.7.1.3
agAwsNewCfgAssociatedIpFloatingIp Set AWS Alteon floating/elastic IP, as a part of HA associated IP set. Note: This MIB is only supported on VA platform.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.1.201.7.1.4
agAwsNewCfgAssociatedIpTableDelete By setting the value to delete(2), Delete a specific assiciated id table entry. Note: This MIB is only supported on VA platform.	Enumerationr/w Enumerated Values: 1 other 2 delete 3 all	.1.3.6.1.4.1.1872.2.5.1.1.1.201.7.1.5

The table of port configuration in the current_configuration block.
Note: This table is only supported in VX instance of Virtualization.

agPortCurCfgTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.2.2.1

A row in the port table in the current_configuration block.

Indexes

agPortCurCfgIndx

Column	Syntax	OID
agPortCurCfgIndx The index of the row in port configurations table. Note: This mib is only supported in VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.1
agPortCurCfgState This is the state of the port.	Enumeration Enumerated Values: 2 enabled 3 disabled 4 blocked	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.2
agPortCurCfgVlanTag This is VLAN tag state of the port	Enumeration Enumerated Values: 2 tagged 3 untagged	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.3
agPortCurCfgRmon This object is used to turn RMON on or off on the port.	Enumeration Enumerated Values: 2 on 3 off	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.5
agPortCurCfgPVID The default VLAN ID for the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.6
agPortCurCfgFastEthAutoNeg This object is used to turn the autonegotiation on or off for fast Ethernet connection.	Enumeration Enumerated Values: 2 on 3 off 4 auto	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.7
agPortCurCfgFastEthSpeed Selects the port speed for fast Ethernet connection.	Enumeration Enumerated Values: 2 mbs10 3 mbs100 4 any 5 mbs1000 6 mbs10000 7 mbs40000 8 auto 9 mbs100000 10 mbs25000	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.8
agPortCurCfgFastEthMode This object is used to select port mode for fast Ethernet connection.	Enumeration Enumerated Values: 2 full-duplex 3 half-duplex 4 full-or-half-duplex	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.9
agPortCurCfgFastEthFctl Selects the port flow control for fast Ethernet connection.	Enumeration Enumerated Values: 2 transmit 3 receive 4 both 5 none	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.10
agPortCurCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	Enumeration Enumerated Values: 2 on 3 off	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.11
agPortCurCfgGigEthFctl This object is used to select port flow control for gigabit Ethernet connection.	Enumeration Enumerated Values: 2 transmit 3 receive 4 both 5 none	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.12
agPortCurCfgPortName The switch port name.	OctetString Constraints: range: 0-63	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.13
agPortCurCfgBwmContract The switch port Bandwidth Management contract number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.14
agPortCurCfgDiscardNonIPs Enable or disable to discard all non-IP traffic on the switch port.	Enumeration Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.15
agPortCurCfgLinkTrap Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.16
agPortCurCfgPreferred This object is used to set the preferred port. Valid only on dual ports.	Enumeration Enumerated Values: 1 copper 2 sfp	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.17
agPortCurCfgBackup This object is used to set the backup port. Valid only on dual ports.	Enumeration Enumerated Values: 2 none 3 copper 4 sfp	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.18
agPortCurCfgEgressBW The configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on.	OctetString Constraints: range: 0-9	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.19
agPortCurCfgNonIPBwmContract The BWM contract for non-IP traffic.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.20
agPortCurCfgGigEthSpeed Selects the port speed for Gigabit Ethernet connection.	Enumeration Enumerated Values: 2 mbs10 3 mbs100 4 any 5 mbs1000 6 mbs10000 7 mbs40000 9 mbs100000 10 mbs25000	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.21
agPortCurCfgGigEthMode This object is used to select port mode for Gigabit Ethernet connection.	Enumeration Enumerated Values: 2 full-duplex 3 half-duplex 4 full-or-half-duplex	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.22
agPortCurCfgPortAlias The switch port alias.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.24
agPortCurCfgPortStp This is the state of the Spanning Tree.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.26
agPortCurCfgPortIpFwd This is the state of the IP Forwarding.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.2.2.1.27

The table of port configuration in the new_configuration block.

agPortNewCfgTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.2.3.1

A row in the port configuration table in the new_configuration block.

Indexes

agPortNewCfgIndx

Column	Syntax	OID
agPortNewCfgIndx The index of the row in port configurations table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.1
agPortNewCfgState This is the state of the port.	Enumerationr/w Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.2
agPortNewCfgVlanTag This is VLAN tag state of the port	Enumerationr/w Enumerated Values: 2 tagged 3 untagged	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.3
agPortNewCfgRmon This object is used to turn RMON on or off on the port.	Enumerationr/w Enumerated Values: 2 on 3 off	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.5
agPortNewCfgPVID The default VLAN ID for the port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.6
agPortNewCfgFastEthAutoNeg This object is used to turn the autonegotiation on or off for fast Ethernet connection.	Enumerationr/w Enumerated Values: 2 on 3 off 4 auto	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.7
agPortNewCfgFastEthSpeed Selects the port speed for fast Ethernet connection.	Enumerationr/w Enumerated Values: 2 mbs10 3 mbs100 4 any 5 mbs1000 6 mbs10000 7 mbs40000 8 auto 9 mbs100000 10 mbs25000	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.8
agPortNewCfgFastEthMode This object is used to select port mode for fast Ethernet connection.	Enumerationr/w Enumerated Values: 2 full-duplex 3 half-duplex 4 full-or-half-duplex	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.9
agPortNewCfgFastEthFctl Selects the port flow control for fast Ethernet connection.	Enumerationr/w Enumerated Values: 2 transmit 3 receive 4 both 5 none	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.10
agPortNewCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	Enumerationr/w Enumerated Values: 2 on 3 off	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.11
agPortNewCfgGigEthFctl This object is used to select port flow control for gigabit Ethernet connection.	Enumerationr/w Enumerated Values: 2 transmit 3 receive 4 both 5 none	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.12
agPortNewCfgPortName The switch port name.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.13
agPortNewCfgBwmContract The switch port Bandwidth Management contract number.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.14
agPortNewCfgDiscardNonIPs Enable or disable to discard all non-IP traffic on the switch port.	Enumerationr/w Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.15
agPortNewCfgLinkTrap Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.16
agPortNewCfgPreferred This object is used to set the preferred port. Valid only on dual ports.	Enumerationr/w Enumerated Values: 1 copper 2 sfp	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.17
agPortNewCfgBackup This object is used to set the backup port. Valid only on dual ports.	Enumerationr/w Enumerated Values: 1 none 2 copper 3 sfp	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.18
agPortNewCfgEgressBW The configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on.	OctetStringr/w Constraints: range: 0-9	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.19
agPortNewCfgNonIPBwmContract The BWM contract for non-IP traffic	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.20
agPortNewCfgGigEthSpeed Selects the port speed for Gigabit Ethernet connection.	Enumerationr/w Enumerated Values: 2 mbs10 3 mbs100 4 any 5 mbs1000 6 mbs10000 7 mbs40000 9 mbs100000 10 mbs25000	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.21
agPortNewCfgGigEthMode This object is used to select port mode for Gigabit Ethernet connection.	Enumerationr/w Enumerated Values: 2 full-duplex 3 half-duplex 4 full-or-half-duplex	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.22
agPortNewCfgPortAlias The switch port alias.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.24
agPortNewCfgPortStp This is the state of the spanning tree.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.26
agPortNewCfgPortIpFwd This is the state of the IP Forwarding.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.2.3.1.27

The table of syslog messages.

agSyslogMsgTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.5.11.1

A syslog message stored on the switch.

Indexes

agSyslogMsgIndex

Column	Syntax	OID
agSyslogMsgIndex The syslog message table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.5.11.1.1
agSyslogMessage The syslog message.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1872.2.5.1.1.5.11.1.2
agSyslogMessageDate The syslog message date.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.1872.2.5.1.1.5.11.1.3
agSyslogMessageSeverity The syslog message severity.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1872.2.5.1.1.5.11.1.4
agSyslogMessageOnly The syslog message plain message.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1872.2.5.1.1.5.11.1.5

The table of syslog messages saved in Flash.

agSyslogSavedMsgTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.5.47.1

A syslog messages saved in FLASH.

Indexes

agSyslogMsgSavedIndex

Column	Syntax	OID
agSyslogMsgSavedIndex The syslog Saved message table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.5.47.1.1
agSyslogSavedMessage The syslog messages saved in FLASH.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1872.2.5.1.1.5.47.1.2

The table of trap hosts which to send SNMP traps in the 
current_configuration block.

agCurCfgTrapHostEntry row .1.3.6.1.4.1.1872.2.5.1.1.6.2.1

A row in the trap host table in the current_configuration block.

Indexes

agCurCfgTrapHostIndx

Column	Syntax	OID
agCurCfgTrapHostIndx The index of the row in trap host table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.6.2.1.1
agCurCfgTrapHostIpAddr The IP address of a trap host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.6.2.1.2
agCurCfgTrapHostCommString The SNMP community string to use with the trap host	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1872.2.5.1.1.6.2.1.3

The table of trap hosts which to send SNMP traps in the
new_configuration block.

agNewCfgTrapHostEntry row .1.3.6.1.4.1.1872.2.5.1.1.6.3.1

A row in the trap host table in the new_configuration block.

Indexes

agNewCfgTrapHostIndx

Column	Syntax	OID
agNewCfgTrapHostIndx The index of the row in trap host table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.6.3.1.1
agNewCfgTrapHostIpAddr The IP address of a trap host.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.6.3.1.2
agNewCfgTrapHostCommString The SNMP community string to use with the trap host	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1872.2.5.1.1.6.3.1.3

The table of URL path for URL load balancing in the current_config.

agApplyTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.8.5.1

Information about an URL path for URL load balancing.

Indexes

agApplyIndex

Column	Syntax	OID
agApplyIndex The table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.8.5.1.1
agApplyString A string in the apply table.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1872.2.5.1.1.8.5.1.2

The table for Management Network definitions
in the current configuration block.

agCurCfgMgmtNetEntry row .1.3.6.1.4.1.1872.2.5.1.1.12.2.1

A row in the management network definition table.

Indexes

agCurCfgMgmtNetIndex

Column	Syntax	OID
agCurCfgMgmtNetIndex The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.12.2.1.1
agCurCfgMgmtNetSubnet The Management Network Address in the current_configuration block.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.12.2.1.2
agCurCfgMgmtNetMask The Management Network Mask in the current_configuration block.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.12.2.1.3
agCurCfgMgmtNetProtocol The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh …	Enumeration Enumerated Values: 1 ssh 2 telnet 3 sshTelnet 4 http 5 sshHttp 6 telnetHttp 7 sshTelnetHttp 8 https 9 sshHttps 10 httpsTelnet 11 sshTelnetHttps 12 httpHttps 13 sshHttpHttps 14 telnetHttpHttps 15 sshTelnetHttpHttps 16 snmp 17 sshSnmp 18 telnetSnmp 19 sshTelnetSnmp 20 httpSnmp 21 sshHttpSnmp 22 telnetHttpSnmp 23 sshTelnetHttpSnmp 24 httpsSnmp 25 sshHttpsSnmp 26 telnetHttpsSnmp 27 sshTelnetHttpsSnmp 28 httpHttpsSnmp 29 sshHttpHttpsSnmp 30 telnetHttpHttpsSnmp 31 sshTelnetHttpHttpsSnmp 32 report 33 sshreport 34 telnetreport 35 sshTelnetreport 36 httpreport 37 sshHttpreport 38 telnetHttpreport 39 sshTelnetHttpreport 40 httpsreport 41 sshHttpsreport 42 httpsTelnetreport 43 sshTelnetHttpsreport 44 httpHttpsreport 45 sshHttpHttpsreport 46 telnetHttpHttpsreport 47 sshTelnetHttpHttpsreport 48 snmpreport 49 sshSnmpreport 50 telnetSnmpreport 51 sshTelnetSnmpreport 52 httpSnmpreport 53 sshHttpSnmpreport 54 telnetHttpSnmpreport 55 sshTelnetHttpSnmpreport 56 httpsSnmpreport 57 sshHttpsSnmpreport 58 telnetHttpsSnmpreport 59 sshTelnetHttpsSnmpreport 60 httpHttpsSnmpreport 61 sshHttpHttpsSnmpreport 62 telnetHttpHttpsSnmpreport 63 sshTelnetHttpHttpsSnmpreport 64 none	.1.3.6.1.4.1.1872.2.5.1.1.12.2.1.4

The table for Management Network definitions
in the new configuration block.

agNewCfgMgmtNetEntry row .1.3.6.1.4.1.1872.2.5.1.1.12.3.1

A row in the management network definition table.

Indexes

agNewCfgMgmtNetIndex

Column	Syntax	OID
agNewCfgMgmtNetIndex The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.12.3.1.1
agNewCfgMgmtNetSubnet The Management Network Address in the new_configuration block.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.12.3.1.2
agNewCfgMgmtNetMask The Management Network Mask in the new_configuration block.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.12.3.1.3
agNewCfgMgmtNetDelete By setting the value to delete(2), the entire row is deleted.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.12.3.1.4
agNewCfgMgmtNetProtocol The Management Network Protocol access in the new_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Ht…	Enumerationr/w Enumerated Values: 1 ssh 2 telnet 3 sshTelnet 4 http 5 sshHttp 6 telnetHttp 7 sshTelnetHttp 8 https 9 sshHttps 10 httpsTelnet 11 sshTelnetHttps 12 httpHttps 13 sshHttpHttps 14 telnetHttpHttps 15 sshTelnetHttpHttps 16 snmp 17 sshSnmp 18 telnetSnmp 19 sshTelnetSnmp 20 httpSnmp 21 sshHttpSnmp 22 telnetHttpSnmp 23 sshTelnetHttpSnmp 24 httpsSnmp 25 sshHttpsSnmp 26 telnetHttpsSnmp 27 sshTelnetHttpsSnmp 28 httpHttpsSnmp 29 sshHttpHttpsSnmp 30 telnetHttpHttpsSnmp 31 sshTelnetHttpHttpsSnmp 32 report 33 sshreport 34 telnetreport 35 sshTelnetreport 36 httpreport 37 sshHttpreport 38 telnetHttpreport 39 sshTelnetHttpreport 40 httpsreport 41 sshHttpsreport 42 httpsTelnetreport 43 sshTelnetHttpsreport 44 httpHttpsreport 45 sshHttpHttpsreport 46 telnetHttpHttpsreport 47 sshTelnetHttpHttpsreport 48 snmpreport 49 sshSnmpreport 50 telnetSnmpreport 51 sshTelnetSnmpreport 52 httpSnmpreport 53 sshHttpSnmpreport 54 telnetHttpSnmpreport 55 sshTelnetHttpSnmpreport 56 httpsSnmpreport 57 sshHttpsSnmpreport 58 telnetHttpsSnmpreport 59 sshTelnetHttpsSnmpreport 60 httpHttpsSnmpreport 61 sshHttpHttpsSnmpreport 62 telnetHttpHttpsSnmpreport 63 sshTelnetHttpHttpsSnmpreport 64 none	.1.3.6.1.4.1.1872.2.5.1.1.12.3.1.5

The table for Management Network definitions
in the current configuration block.

agCurCfgMgmtNet6Entry row .1.3.6.1.4.1.1872.2.5.1.1.12.4.1

A row in the management network definition table.

Indexes

agCurCfgMgmtNet6Index

Column	Syntax	OID
agCurCfgMgmtNet6Index The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.12.4.1.1
agCurCfgMgmtNet6Subnet The IPV6 address of the allowed network over management port. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or x…	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.12.4.1.2
agCurCfgMgmtNet6Prefix The IPV6 prefix length of the allowed networks on management port.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.1872.2.5.1.1.12.4.1.3
agCurCfgMgmtNet6Protocol The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh …	Enumeration Enumerated Values: 1 ssh 2 telnet 3 sshTelnet 4 http 5 sshHttp 6 telnetHttp 7 sshTelnetHttp 8 https 9 sshHttps 10 httpsTelnet 11 sshTelnetHttps 12 httpHttps 13 sshHttpHttps 14 telnetHttpHttps 15 sshTelnetHttpHttps 16 snmp 17 sshSnmp 18 telnetSnmp 19 sshTelnetSnmp 20 httpSnmp 21 sshHttpSnmp 22 telnetHttpSnmp 23 sshTelnetHttpSnmp 24 httpsSnmp 25 sshHttpsSnmp 26 telnetHttpsSnmp 27 sshTelnetHttpsSnmp 28 httpHttpsSnmp 29 sshHttpHttpsSnmp 30 telnetHttpHttpsSnmp 31 sshTelnetHttpHttpsSnmp 32 report 33 sshreport 34 telnetreport 35 sshTelnetreport 36 httpreport 37 sshHttpreport 38 telnetHttpreport 39 sshTelnetHttpreport 40 httpsreport 41 sshHttpsreport 42 httpsTelnetreport 43 sshTelnetHttpsreport 44 httpHttpsreport 45 sshHttpHttpsreport 46 telnetHttpHttpsreport 47 sshTelnetHttpHttpsreport 48 snmpreport 49 sshSnmpreport 50 telnetSnmpreport 51 sshTelnetSnmpreport 52 httpSnmpreport 53 sshHttpSnmpreport 54 telnetHttpSnmpreport 55 sshTelnetHttpSnmpreport 56 httpsSnmpreport 57 sshHttpsSnmpreport 58 telnetHttpsSnmpreport 59 sshTelnetHttpsSnmpreport 60 httpHttpsSnmpreport 61 sshHttpHttpsSnmpreport 62 telnetHttpHttpsSnmpreport 63 sshTelnetHttpHttpsSnmpreport 64 none	.1.3.6.1.4.1.1872.2.5.1.1.12.4.1.4

The table for Management Network definitions
in the new configuration block.

agNewCfgMgmtNet6Entry row .1.3.6.1.4.1.1872.2.5.1.1.12.5.1

A row in the management network definition table.

Indexes

agNewCfgMgmtNet6Index

Column	Syntax	OID
agNewCfgMgmtNet6Index The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.12.5.1.1
agNewCfgMgmtNet6Subnet The IPV6 address of the allowed network over management port. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or x…	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.1872.2.5.1.1.12.5.1.2
agNewCfgMgmtNet6Prefix The IPV6 prefix length of the allowed network management port.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.1872.2.5.1.1.12.5.1.3
agNewCfgMgmtNet6Protocol The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh …	Enumerationr/w Enumerated Values: 1 ssh 2 telnet 3 sshTelnet 4 http 5 sshHttp 6 telnetHttp 7 sshTelnetHttp 8 https 9 sshHttps 10 httpsTelnet 11 sshTelnetHttps 12 httpHttps 13 sshHttpHttps 14 telnetHttpHttps 15 sshTelnetHttpHttps 16 snmp 17 sshSnmp 18 telnetSnmp 19 sshTelnetSnmp 20 httpSnmp 21 sshHttpSnmp 22 telnetHttpSnmp 23 sshTelnetHttpSnmp 24 httpsSnmp 25 sshHttpsSnmp 26 telnetHttpsSnmp 27 sshTelnetHttpsSnmp 28 httpHttpsSnmp 29 sshHttpHttpsSnmp 30 telnetHttpHttpsSnmp 31 sshTelnetHttpHttpsSnmp 32 report 33 sshreport 34 telnetreport 35 sshTelnetreport 36 httpreport 37 sshHttpreport 38 telnetHttpreport 39 sshTelnetHttpreport 40 httpsreport 41 sshHttpsreport 42 httpsTelnetreport 43 sshTelnetHttpsreport 44 httpHttpsreport 45 sshHttpHttpsreport 46 telnetHttpHttpsreport 47 sshTelnetHttpHttpsreport 48 snmpreport 49 sshSnmpreport 50 telnetSnmpreport 51 sshTelnetSnmpreport 52 httpSnmpreport 53 sshHttpSnmpreport 54 telnetHttpSnmpreport 55 sshTelnetHttpSnmpreport 56 httpsSnmpreport 57 sshHttpsSnmpreport 58 telnetHttpsSnmpreport 59 sshTelnetHttpsSnmpreport 60 httpHttpsSnmpreport 61 sshHttpHttpsSnmpreport 62 telnetHttpHttpsSnmpreport 63 sshTelnetHttpHttpsSnmpreport 64 none	.1.3.6.1.4.1.1872.2.5.1.1.12.5.1.4
agNewCfgMgmtNet6Delete By setting the value to delete(2), the entire row is deleted.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.12.5.1.5

The table for Pattern Match Group definitions
in the current configuration block.
Note:This table is not supported for VX instance of Virtualization.

agCurCfgPgrpMatchEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1

A row in the Pattern Match Group table.

Indexes

agCurCfgPgrpMatchIndex

Column	Syntax	OID
agCurCfgPgrpMatchIndex The index of the Pattern Match Group Definition table. Note:This mib is not supported for VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.1
agCurCfgPgrpName The name for the Pattern Match Group.	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.2
agCurCfgPgrpMatchBmap The pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || ||…	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.3

The table for Pattern Match Group definitions
in the new configuration block.
Note:This table is not supported for VX instance of Virtualization.

agNewCfgPgrpMatchEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1

A row in the Pattern Match Group definition table.

Indexes

agNewCfgPgrpMatchIndex

Column	Syntax	OID
agNewCfgPgrpMatchIndex The index of the Pattern Match Group Definition table. Note:This mib is not supported for VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.1
agNewCfgPgrpName The name for the Pattern Match Group.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.2
agNewCfgPgrpMatchAdd The Pattern Match Group String added in the new_configuration block.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.3
agNewCfgPgrpMatchRem The Pattern Match Group String removed in the new_configuration block.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.4
agNewCfgPgrpMatchBmap The pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || ||…	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.5
agNewCfgPgrpDelete By setting the value to delete(2), the entire row is deleted.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.6

The table of Security related features enabled/disabled for this port.
Note:This table is not supported for VX instance of Virtualization.

agCfgSecurityPortTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.2.1

A row in the Security related in the current configuration block.

Indexes

agCfgSecurityPortIndx

Column	Syntax	OID
agCfgSecurityPortIndx The port index. Note:This mib is not supported for VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.1
agCurCfgSecurityDosState Enable/Disable DOS attack per port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.2
agNewCfgSecurityDosState Enable/Disable DOS attack per port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.3
agCurCfgSecurityIpAclState Enable/Disable IP ACL per port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.4
agNewCfgSecurityIpAclState Enable/Disable IP ACL per port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.5
agCurCfgSecurityUbState Enable/Disable UDP Blast per port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.6
agNewCfgSecurityUbState Enable/Disable UDP Blast per port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.7
agCurCfgSecurityBogonState Enable/Disable Bogon IP ACL per port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.8
agNewCfgSecurityBogonState Enable/Disable Bogon IP ACL per port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.9
agCurCfgSecurityAttacksBmap The DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |…	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.10
agNewCfgSecurityAttacksBmap The DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |…	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.11
agNewCfgSecurityAddAttack This is an action object to add a DoS Attack to a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPRe…	Enumerationr/w Enumerated Values: 1 iplen 2 ipversion 3 broadcast 4 loopback 5 land 6 ipreserved 7 ipttl 8 ipprot 9 ipoptlen 10 fragmoredont 11 fragdata 12 fragboundary 13 fraglast 14 fragdontoff 15 fragopt 16 fragoff 17 fragoversize 18 tcplen 19 tcpportzero 20 blat 21 tcpreserved 22 nullscan 23 fullxmasscan 24 finscan 25 vecnascan 26 xmassscan 27 synfinscan 28 flagabnormal 29 syndata 30 synfrag 31 ftpport 32 dnsport 33 seqzero 34 ackzero 35 tcpoptlen 36 udplen 37 udpportzero 38 fraggle 39 pepsi 40 rc8 41 snmpnull 42 icmplen 43 smurf 44 icmpdata 45 icmpoff 46 icmptype 47 igmplen 48 igmpfrag 49 igmptype 50 arplen 51 arpnbcast 52 arpnucast 53 arpspoof 54 garp 55 ip6len 56 ip6version	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.12
agNewCfgSecurityRemAttack This is an action object to remove a DoS attack for a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - …	Enumerationr/w Enumerated Values: 1 iplen 2 ipversion 3 broadcast 4 loopback 5 land 6 ipreserved 7 ipttl 8 ipprot 9 ipoptlen 10 fragmoredont 11 fragdata 12 fragboundary 13 fraglast 14 fragdontoff 15 fragopt 16 fragoff 17 fragoversize 18 tcplen 19 tcpportzero 20 blat 21 tcpreserved 22 nullscan 23 fullxmasscan 24 finscan 25 vecnascan 26 xmassscan 27 synfinscan 28 flagabnormal 29 syndata 30 synfrag 31 ftpport 32 dnsport 33 seqzero 34 ackzero 35 tcpoptlen 36 udplen 37 udpportzero 38 fraggle 39 pepsi 40 rc8 41 snmpnull 42 icmplen 43 smurf 44 icmpdata 45 icmpoff 46 icmptype 47 igmplen 48 igmpfrag 49 igmptype 50 arplen 51 arpnbcast 52 arpnucast 53 arpspoof 54 garp 55 ip6len 56 ip6version	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.13
agNewCfgSecurityDoSAttacks Add all DoS attacks to the port by setting the value to '2'. Remove all DoS attacks from the port by setting the value to '3'. Do nothing by setting the value to '1'. When read, the value '0' is returned always.	Enumerationr/w Enumerated Values: 1 ok 2 addall 3 remall	.1.3.6.1.4.1.1872.2.5.1.1.14.2.1.14

The table of IP ACL in the current configuration block.
Note: This table is not supported in VX instance of Virtualization.

ipAclCurCfgEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1

A row in the IP ACL table

Indexes

ipAclCurCfgIndx

Column	Syntax	OID
ipAclCurCfgIndx The index of the IP ACL table. Note: This mib is not supported in VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.1
ipAclCurCfgIp The IP address of the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.2
ipAclCurCfgMask The IP address Mask of the entry. Note: This mib is not supported in VX instance of Virtualization.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.3

The table of IP ACL in the new configuration block.
Note: This table is not supported in VX instance of Virtualization.

ipAclNewCfgEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1

A row in the IP ACL table.
Note: This table is not supported in VX instance of Virtualization.

Indexes

ipAclNewCfgIndx

Column	Syntax	OID
ipAclNewCfgIndx The index of the IP ACL table. Note: This table is not supported in VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.1
ipAclNewCfgIp The IP address of the entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.2
ipAclNewCfgAction When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.3
ipAclNewCfgMask The IP address Mask of the entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.4

The UDP Blast port table in the current configuration block.
Note: This table is not supported in VX instance of Virtualization.

udpBlastCurCfgudpPortEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1

A row in the UDP Blast UDP Port table

Indexes

udpBlastCurCfgudpPortLowIndx udpBlastCurCfgudpPortHighIndx

Column	Syntax	OID
udpBlastCurCfgudpPortLowIndx The low UDP port number of UDP port range in the UDP Port table. Note: This mib is not supported in VX instance of Virtualization.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.1
udpBlastCurCfgudpPortHighIndx The high UDP port number of UDP port range in the UDP Port table. If highIndx and lowIndx are set to the same, it is considered a single port instead of range Note: This mib is not supported in VX instance of Virtualiza…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.2
udpBlastCurCfgudpPortEntryPacketLimit The Packet Limit of the UDP Port Entry.	Integer32 Constraints: range: 1-20000000	.1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.3

The UDP Blast table in the new configuration block.
Note: This table is not supported in VX instance of Virtualization.

udpBlastNewCfgudpPortEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1

A row in the UDP Blast UDP Port table

Indexes

udpBlastNewCfgudpPortLowIndx udpBlastNewCfgudpPortHighIndx

Column	Syntax	OID
udpBlastNewCfgudpPortLowIndx The low UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 5000…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.1
udpBlastNewCfgudpPortHighIndx The high UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 500…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.2
udpBlastNewCfgudpPortEntryDelete This deletes the UDP port entry from lowIndx to highIndx.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.3
udpBlastNewCfgudpPortEntryPacketLimit The Packet Limit of the UDP Port Entry.	Integer32r/w Constraints: range: 1-20000000	.1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.4

The table of DST IP ACL in the current configuration block.

ipDstAclCurCfgEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1

A row in the DST IP ACL table

Indexes

ipDstAclCurCfgIndx

Column	Syntax	OID
ipDstAclCurCfgIndx The index of the DST IP ACL table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.1
ipDstAclCurCfgIp The IP address of the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.2
ipDstAclCurCfgMask The IP address Mask of the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.3

The table of DST IP ACL in the new configuration block.

ipDstAclNewCfgEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1

A row in the DST IP ACL table

Indexes

ipDstAclNewCfgIndx

Column	Syntax	OID
ipDstAclNewCfgIndx The index of the DST IP ACL table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.1
ipDstAclNewCfgIp The IP address of the entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.2
ipDstAclNewCfgAction When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.3
ipDstAclNewCfgMask The IP address Mask of the entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.4

The IP reputation white list table (new configuration block).
Note:This table is not supported for VX instance of Virtualization.

ipRepNewWhiteListTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.11.25.1

A row in the IP reputation white list table.

Indexes

ipRepNewWhiteListIndex

Column	Syntax	OID
ipRepNewWhiteListIndex index of IP address in white list of IP reputation. Note:This mib is not supported for VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.11.25.1.1
ipRepNewWhiteListIP IP address in the white list of IP reputation.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.11.25.1.2
ipRepNewWhiteListMask mask of IP address in the white list of IP reputation.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.11.25.1.3
ipRepNewWhiteListAction action flag of IP address in white list of IP reputation (2 - delete, 1 - do nothing).	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.14.11.25.1.4

The IP reputation white list table (current configuration block).
Note:This table is not supported for VX instance of Virtualization.

ipRepCurWhiteListTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.11.26.1

A row in the IP reputation white list table.

Indexes

ipRepCurWhiteListIndex

Column	Syntax	OID
ipRepCurWhiteListIndex index of IP address in white list of IP reputation. Note:This mib is not supported for VX instance of Virtualization.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.11.26.1.1
ipRepCurWhiteListIP IP address in the white list of IP reputation.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.11.26.1.2
ipRepCurWhiteListMask mask of IP address in the white list of IP reputation.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1872.2.5.1.1.14.11.26.1.3

The IP reputation countries/geolocations table (new configuration block).
Note:This table is not supported for VX instance of Virtualization.

ipRepNewCountriesTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.11.27.1

A row in the IP reputation countries/geolocations table.

Indexes

ipRepNewCfgCountriesIndex

Column	Syntax	OID
ipRepNewCfgCountriesIndex index of country/geolocation in the blocked countries/geolocations list of IP reputation. Note:This mib is not supported for VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.11.27.1.1
ipRepNewCfgCountriesCountry Country/Geolocation in the blocked countries/geolocations list of IP reputation.	OctetString Constraints: range: 0-50	.1.3.6.1.4.1.1872.2.5.1.1.14.11.27.1.2

The IP reputation countries/geolocations table (current configuration block).
Note:This table is not supported for VX instance of Virtualization.

ipRepCurCountriesTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.14.11.28.1

A row in the IP reputation countries/geolocations table.

Indexes

ipRepCurCfgCountriesIndex

Column	Syntax	OID
ipRepCurCfgCountriesIndex index of country/geolocation in the blocked countries/geolocations list of IP reputation. Note:This mib is not supported for VX instance of Virtualization.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.14.11.28.1.1
ipRepCurCfgCountriesCountry Country/Geolocation in the blocked countries/geolocations list of IP reputation.	OctetString Constraints: range: 0-50	.1.3.6.1.4.1.1872.2.5.1.1.14.11.28.1.2

The table of ports and their access states

agCurCfgPortAccessEntry row .1.3.6.1.4.1.1872.2.5.1.1.16.2.1

A row in the port access table

Indexes

agCurCfgPortAccessIndex

Column	Syntax	OID
agCurCfgPortAccessIndex The port number in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.16.2.1.1
agCurCfgPortAccessState The port access state of the port. deny(0) - port does not have management access allow(1) - port has management access	Enumeration Enumerated Values: 0 deny 1 allow	.1.3.6.1.4.1.1872.2.5.1.1.16.2.1.2

The table of ports and their access states

agNewCfgPortAccessEntry row .1.3.6.1.4.1.1872.2.5.1.1.16.3.1

A row in the port access table.

Indexes

agNewCfgPortAccessIndex

Column	Syntax	OID
agNewCfgPortAccessIndex The port number in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.16.3.1.1
agNewCfgPortAccessState The port access state of the port. deny(0) - port does not have management access allow(1) - port has management access	Enumerationr/w Enumerated Values: 0 deny 1 allow	.1.3.6.1.4.1.1872.2.5.1.1.16.3.1.2

The table of error messages for asynchrnous save operation.

agSaveTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.17.3.1

Error Strings generated while asynchronous save operation.

Indexes

agSaveIndex

Column	Syntax	OID
agSaveIndex The table index for save.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.17.3.1.1
agSaveString A string in the Save table.	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.17.3.1.2

The table of octets that when combined create a file.

agFileTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.18.6.1

An entry in the file table.

Indexes

agFileIndex

Column	Syntax	OID
agFileIndex The table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.18.6.1.1
agFileString A string with bogon ip/mask pair.	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.4.1.1872.2.5.1.1.18.6.1.2

The table of error messages for asynchrnous snmp file transfer
operation.

agFileErrorTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.18.8.1

Error Strings generated while asynchronous snmp file transfer
operation.

Indexes

agFileErrorIndex

Column	Syntax	OID
agFileErrorIndex The table index for snmp file transfer error table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.18.8.1.1
agFileErrorString A string in the snmp file transfer error table.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1872.2.5.1.1.18.8.1.2

The table of Access user configuration.

agAccessUserCurCfgTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1

A row in the Access user configuration table.

Indexes

agAccessUserCurCfgUId

Column	Syntax	OID
agAccessUserCurCfgUId The User identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.1
agAccessUserCurCos The user class of service.The COS applicable for users in a) Admin Context - user(0),l1oper(11),l2oper(12),oper(4) & admin(7) b) vADC - All except l1oper(11) & l2oper(12) c) Standalone ADC - All except l3oper(9),l3admin…	Enumeration Enumerated Values: 0 user 1 crtadmin 2 slboper 3 l4oper 4 oper 5 slbadmin 6 l4admin 7 admin 8 slbview 9 l3oper 10 l3admin 11 l1oper 12 l2oper 13 wsadmin 14 wsowner 15 wsview	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.2
agAccessUserCurCfgName The user name.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.3
agAccessUserCurCfgAdminPswd The character string representing the admin password.	OctetString Constraints: range: 0-160	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.4
agAccessUserCurCfgPswd The character string representing the user password.	OctetString Constraints: range: 0-160	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.5
agAccessUserCurCfgConfPswd The character string is used to confirm the user password.	OctetString Constraints: range: 0-160	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.6
agAccessUserCurCfgBackDoor Enable or disable User backdoor Access.	Enumeration Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.7
agAccessUserCurCfgCrtMng Enable or disable certificate management permissions.	Enumeration Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.8
agAccessUserCurCfgReal The user real servers.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.9
agAccessUserCurCfgState Enable or disable a user.	Enumeration Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.10
agAccessUserCurCfgBmap The real servers added to this user. The selected real servers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Real Server 9 …	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.11
agAccessUserCurCfgLanguage Set Web UI user display language.	Enumeration Enumerated Values: 0 english 1 chinese 2 korean 3 japanese	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.12
agAccessUserCurCfgSshkey The SSH Public Key ID	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.13

The table of Access user configuration.

agAccessUserNewCfgTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1

A row in the Access user configuration table.

Indexes

agAccessUserNewCfgUId

Column	Syntax	OID
agAccessUserNewCfgUId The User identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.1
agAccessUserNewCos The user class of service.The COS applicable for users in a) Admin Context - user(0),l1oper(11),l2oper(12),oper(4) & admin(7) b) vADC - All except l1oper(11) & l2oper(12) c) Standalone ADC - All except l3oper(9),l3admin…	Enumerationr/w Enumerated Values: 0 user 1 crtadmin 2 slboper 3 l4oper 4 oper 5 slbadmin 6 l4admin 7 admin 8 slbview 9 l3oper 10 l3admin 11 l1oper 12 l2oper 13 wsadmin 14 wsowner 15 wsview	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.2
agAccessUserNewCfgName The user name.	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.3
agAccessUserNewCfgAdminPswd The character string representing the admin password.	OctetStringr/w Constraints: range: 0-160	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.4
agAccessUserNewCfgPswd The character string representing the user password.	OctetStringr/w Constraints: range: 0-160	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.5
agAccessUserNewCfgConfPswd This character string is used to confirm the user password.	OctetStringr/w Constraints: range: 0-160	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.6
agAccessUserNewCfgBackDoor Enable or disable User backdoor access.	Enumerationr/w Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.7
agAccessUserNewCfgCrtMng Enable or disable a certificate management permissions.	Enumerationr/w Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.8
agAccessUserNewCfgRealAdd Add user real server.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.9
agAccessUserNewCfgRealRem Remove user real server.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.10
agAccessUserNewCfgState Enable or disable a user.	Enumerationr/w Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.11
agAccessUserNewCfgDelete This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.12
agAccessUserNewCfgBmap The real servers added to this user. The selected real servers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Real Server 9 …	OctetString	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.13
agAccessUserNewCfgEnhRealAdd Add user real server name.	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.14
agAccessUserNewCfgEnhRealRem Remove user real server name.	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.15
agAccessUserNewCfgLanguage Set Web UI user display language.	Enumerationr/w Enumerated Values: 0 english 1 chinese 2 korean 3 japanese	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.16
agAccessUserNewCfgSshkey The SSH Public Key ID	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.17

The table of Access user configuration.

agAccessUserEnhRealsTableEntry row .1.3.6.1.4.1.1872.2.5.1.1.19.1.1.3.1

A row in the Access user configuration table.

Indexes

agAccessUserIndex agAccessUserEnhRealIndex

Column	Syntax	OID
agAccessUserIndex The User identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.3.1.1
agAccessUserEnhRealIndex Reaser server index added to the user.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.1872.2.5.1.1.19.1.1.3.1.2

The table of Access user configuration.