agCurCfgConsole
ALTEON-CHEETAH-SWITCH-MIB ·
.1.3.6.1.4.1.1872.2.5.1.1.1.23
Object
scalar
Enumeration
Enable or disable console output of syslog messages.
Context
- MIB
- ALTEON-CHEETAH-SWITCH-MIB
- OID
.1.3.6.1.4.1.1872.2.5.1.1.1.23- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- agSystem
- Siblings
- 50
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agSoftwareVersion The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not av… | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.10 |
| agBootVer The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available. | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.11 |
| agImage1Ver The version of the software image stored in image 1 storage in the
form of 'major.minor.maintenance.bugfix'. A zero length string is returned if
version is not available or the… | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.12 |
| agImage2Ver The version of the software image stored in image 2 storage in the
form of 'major.minor.maintenance.bugfix'. A zero length string is returned if
version is not available or the… | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.13 |
| agRtcDate The date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available. | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.14 |
| agRtcTime The time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available. | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.15 |
| agLastSetErrorReason The error reason of the last SET failure. | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.16 |
| agCurCfgHttpServerPort The TCP port number that the HTTP server is listening to
in the current_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.17 |
| agNewCfgHttpServerPort The TCP port number that the HTTP server is listening to
in the new_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.18 |
| agCurCfgLoginBanner The user defined login banner. | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.19 |
| agApplyConfiguration This is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the… | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.2 |
| agNewCfgLoginBanner The user defined login banner. | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.20 |
| agCurCfgSmtpHost The user defined SMTP host. | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.21 |
| agNewCfgSmtpHost The user defined SMTP host. If it is a host name then please configure agNewCfgSmtpHostIPVersion.
By default IPv4 version will be choosen.
If IPv4 or Ipv6 address is configured th… | scalar | OctetString | .1.3.6.1.4.1.1872.2.5.1.1.1.22 |
| agNewCfgConsole Enable or disable console output of syslog messages. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.24 |
| agCurCfgBootp Enable or disable the use of BootP, as currently configured in the
current_configuration block. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.29 |
| agSavePending This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.3 |
| agNewCfgBootp Enable or disable the use of BootP, in the new_configuration block. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.30 |
| agCurCfgSnmpTimeout Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the… | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.32 |
| agNewCfgSnmpTimeout Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the… | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.33 |
| agCurCfgTelnetServerPort The TCP port number that the telnet server listens for telnet
sessions. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.34 |
| agNewCfgTelnetServerPort The TCP port number that the telnet server listens for telnet
sessions. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.35 |
| agClearFlashDump This is an action object to clear the FLASH dump.
ok(1) is returned when this object is read. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.36 |
| agCurCfgNortelMultipleStgMode Enable or disable Nortel multiple STG mode. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.37 |
| agNewCfgNortelMultipleStgMode Enable or disable Nortel multiple STG mode. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.38 |
| agCurCfgTrapSrcIf The SNMP trap source interface number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.1.1.1.39 |
| agSaveConfiguration This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup i… | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.4 |
| agNewCfgTrapSrcIf The SNMP trap source interface number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1872.2.5.1.1.1.40 |
| agCurCfgARPMaxRate The maximum allowed rate of MP-destined ARP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.41 |
| agNewCfgARPMaxRate The maximum allowed rate of MP-destined ARP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.42 |
| agCurCfgICMPMaxRate The maximum allowed rate of MP-destined ICMP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.43 |
| agNewCfgICMPMaxRate The maximum allowed rate of MP-destined ICMP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.44 |
| agCurCfgTCPMaxRate The maximum allowed rate of MP-destined TCP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.45 |
| agNewCfgTCPMaxRate The maximum allowed rate of MP-destined TCP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.46 |
| agCurCfgUDPMaxRate The maximum allowed rate of MP-destined UDP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.47 |
| agNewCfgUDPMaxRate The maximum allowed rate of MP-destined UDP packets. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.48 |
| agCurCfgHttpsServerPort The TCP port number that the HTTPS server is listening to
in the current_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.49 |
| agRevert This is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will cop… | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.5 |
| agNewCfgHttpsServerPort The TCP port number that the HTTPS server is listening to
in the new_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.50 |
| agCurDaylightSavings The daylight savings location. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.55 |
| agNewDaylightSavings The daylight savings location. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.56 |
| agCurCfgIdleCLITimeout Set idle CLI sessions timeout. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.57 |
| agNewCfgIdleCLITimeout Set idle CLI sessions timeout. | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.58 |
| agCurCfgXMLCfgServerPort The TCP port number that the XML config server is listening to
in the current_configuration block. If HTTPS is also enabled then
the port numbers should be the same | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.59 |
| agRevertApply This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted… | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.6 |
| agNewCfgXMLCfgServerPort The TCP port number that the XML config server is listening to
in the new_configuration block. If HTTPS is also enabled then
the port numbers should be the same | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.60 |
| agSymantecGlobalState This is an action object to globally enable or disable Symantec feature on the switch. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.61 |
| agReset This is an action object to reboot the switch or a pblade.
other(1) is returned always when read. | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.7 |
| agConfigForNxtReset The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup conf… | scalar | Enumeration | .1.3.6.1.4.1.1872.2.5.1.1.1.8 |
| agImageForNxtReset The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2
... | scalar | Integer32 | .1.3.6.1.4.1.1872.2.5.1.1.1.9 |