iphelperForwDelay
ALCATEL-ENT1-UDP-RELAY-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8
Object
scalar
r/w
Unsigned32
This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. It is typically set as seconds, but the value is totally client dependent. This relay will not forward frames until client frames have 'secs' field set to atleast the value iphelperForwDelay.
Context
- MIB
- ALCATEL-ENT1-UDP-RELAY-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- iphelperMIB
- Siblings
- 39
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iphelperTable A list of next hop IP Address for the DHCP Relay Agent. | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1 |
| iphelperForwardOption This is the forwarding option for the BOOTP/DHCP Relay Agent.
Default value is standard (1). | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.10 |
| iphelperResetAllStats This parameter resets all the ip helper statistics.
1 - reset all stats. Both Global and server stats.
2 - reset all global statistics.
3 - reset all server statistics.
When the … | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.11 |
| iphelperBootupOption deprecated This object allows the user to enable or disable the
functionality of the relay to get an IP address at the
time of system boot-up and assign that IP address for
the ip interface … | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.12 |
| iphelperBootupPacketOption deprecated This object is used in conjunction with iphelperBootupOption.
This specify the packet format with the choices of BOOTP or DHCP
to be used to get an IP address at the time of syste… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.13 |
| iphelperAgentInformation This object allows user to enable or disable the functionality
of inserting the relay agent information option to the DHCP
option field according to RFC 3046. When is is disbled … | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.14 |
| iphelperAgentInformationPolicy This object allows the user to select the policy of either
drop, keep or replace the relay agent information option if
this option is already present in the DHCP packet. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.15 |
| iphelperPXESupport When enabled the relay agent will replace the source IP address
of the packet with the gateway IP address from the DHCP packet.
The default value is disabled. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.16 |
| iphelperDhcpOption82FormatType DHCP option-82 defines the type of information carried in circuit id
and remote id sub option fields. If the type selected is string the actual
value of the string can be found i… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.17 |
| iphelperDhcpOption82StringValue The value of the string that will be used in the circuit id and remote id
sub options. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.18 |
| iphelperDhcpOption82FormatASCIIField1 The type of the first field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option … | scalar | IphelpereOption82ASCIIFieldType | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.19 |
| iphelperStatTable This keeps statistics for each next hop IP Address. | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2 |
| iphelperDhcpOption82FormatASCIIField1StringValue The string value of the first field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if th… | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.20 |
| iphelperDhcpOption82FormatASCIIField2 The type of the second field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option… | scalar | IphelpereOption82ASCIIFieldType | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.21 |
| iphelperDhcpOption82FormatASCIIField2StringValue The string value of the second field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if t… | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.22 |
| iphelperDhcpOption82FormatASCIIField3 The type of the third field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option … | scalar | IphelpereOption82ASCIIFieldType | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.23 |
| iphelperDhcpOption82FormatASCIIField3StringValue The string value of the third field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if th… | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.24 |
| iphelperDhcpOption82FormatASCIIField4 The type of the fourth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option… | scalar | IphelpereOption82ASCIIFieldType | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.25 |
| iphelperDhcpOption82FormatASCIIField4StringValue The string value of the fourth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if t… | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.26 |
| iphelperDhcpOption82FormatASCIIField5 The type of the fifth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option … | scalar | IphelpereOption82ASCIIFieldType | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.27 |
| iphelperDhcpOption82FormatASCIIField5StringValue The string value of the fifth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if th… | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.28 |
| iphelperDhcpOption82FormatASCIIDelimiter The value of the delimiter that is inserted between the fields in the
Option 82 string in ASCII format, which will be copied to Option-82
circuit id of the DHCP packet. This va… | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.29 |
| iphelperRxFromClient This keeps track of the number of packets recieved from the client. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.3 |
| iphelperResetAllOpt82ErrStats This parameter resets all the ip helper Option 82 error statistics.
When the reset operation is done, subsystem will
change the value to zero (0).
Subsystem will always return zer… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.30 |
| iphelperOption82ErrStatsTable A list of Option 82 related error statistic count per port and per vlan. | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31 |
| iphelperMaxHopsViolation This keeps track of the number of packets dropped due to
max hops violation. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.4 |
| dhcpSnoopingOption82FormatType DHCP option-82 defines the type of information carried in circuit id
and remote id sub option fields. If the type selected is string the actual
value of the string can be found in… | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.45 |
| dhcpSnoopingOption82StringValue The value of the string that will be used in the circuit id and remote id
sub options. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.46 |
| dhcpSnoopingOption82FormatASCIIConfigurableTable A list of ascii fields used for Circuit ID or Remote ID. | table | - | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47 |
| alaMdnsAdminStatus MDNS global admin status. | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.48 |
| alaMdnsGreTunnelName Specifies the tunnel name for the MDNS feature. | scalar | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.49 |
| iphelperForwDelayViolation This keeps track of the number of packets dropped due to
forward delay violation. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.5 |
| alaMdnsOperStatus MDNS operational status | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.50 |
| alaSsdpGreTunnelName Specifies the GRE tunnel IP interface name associated with the SSDP Relay feature. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.51 |
| alaSsdpAdminStatus SSDP Relay global status | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.52 |
| alaSsdpOperStatus SSDP operational status | scalar | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.53 |
| iphelperAgentInfoViolation This keeps track of the number of packets dropped due to
DHCP packet with giaddr field not equal to zero and
Relay Agent Information option is present and also the
Relay Agent Inf… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.6 |
| iphelperInvalidGatewayIP This keeps track of the number of packets dropped due to
giaddr matching a local subnet and Relay Agent Information
option is present in the DHCP packet. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.7 |
| iphelperMaxHops This sets the BOOTP/DHCP relay's maximum hops
forwarding limit and is only used by the BOOTP/DHCP service.
If a frame arrives with hopcount greater than or equal
to iphelperMaxHop… | scalar | Integer32 | .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.9 |