ALCATEL-ENT1-UDP-RELAY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
23
Rows
23
Columns
116

iphelperTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk iphelperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::iphelperTable' 
A list of next hop IP Address for the DHCP Relay Agent.
iphelperEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1
An entry in the ip helper table
Indexes
Column Syntax OID
iphelperVlandeprecated
This object is applicable when iphelperForwardOption is
equal to perVlan (2). On Per VLAN mod the next hop
IP Address corresponds to specific source VLAN. Based on
the VLAN that the DHCP packet comes to the DHCP Relay…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.1
iphelperNextHopIpAddressdeprecated
This specifies the next hop IP Address of the
DHCP Relay Agent is to forward the DHCP packet.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.2
iphelperResetSrvStatsdeprecated
When set to 1, will reset all the statistic for this
server. On standard mode vlan will be zero. After the
reset operation, system will change this back to a zero (0).
Subsystem will always return zero (0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.3
iphelperRowStatusdeprecated
Row Status for creating/deleting
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.1.1.4

iphelperStatTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk iphelperStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::iphelperStatTable' 
This keeps statistics for each next hop IP Address.
iphelperStatEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1
An entry in the stat table.
Indexes
Column Syntax OID
iphelperStatsVlandeprecated
This object is zero (0) when iphelperForwardOption is
equal to standard (1). On Per VLAN mod the next hop
IP Address corresponds to specific source VLAN. Based on
the VLAN that the DHCP packet comes to the DHCP Relay
…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.1
iphelperStatsNextHopIpAddrdeprecated
This specifies the unique server address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.2
iphelperTxToNextHopdeprecated
This keeps track of the number of packets transmitted to the server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.3
iphelperInvalidAgentInfoOptFrmSrverdeprecated
This keeps track of the number of packets dropped due to
invalid from DHCP server with Relay Agent Information option
in the DHCP packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.2.1.4

iphelperOption82ErrStatsTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk iphelperOption82ErrStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::iphelperOption82ErrStatsTable' 
A list of Option 82 related error statistic count per port and per vlan.
iphelperOption82ErrStatsEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1
An entry in the ip helper Option 82 error statistics table
Indexes
Column Syntax OID
iphelperOpt82ifIndexdeprecated
The interface where the DHCP packet ingress the switch that
caused the Agent Info Violation or the Invalid Gateway
IP Address error.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.1
iphelperOpt82vlandeprecated
The vlan where the DHCP packet ingress the switch that
caused the Agent Info Violation or the Invalid Gateway
IP Address error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.2
iphelperOpt82agentInfoViolationCntdeprecated
The number of Agent Info Violation seen on this interface and vlan.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.3
iphelperOpt82invalidGatewayIPAddrCntdeprecated
The number of Invalid Gateway IP Address seen on this interface and vlan.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.4
iphelperOpt82resetErrStatsdeprecated
This parameter resets the ip helper Option 82 error statistics
on this interface and vlan. When the reset operation is done,
subsystem will change the value to zero (0). Subsystem will always return
zero (0).
Enumerationr/w
Enumerated Values:
0noOperation
1resetErrStats
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.31.1.5

dhcpSnoopingOption82FormatASCIIConfigurableTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47 · 1 row entry · 13 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk dhcpSnoopingOption82FormatASCIIConfigurableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::dhcpSnoopingOption82FormatASCIIConfigurableTable' 
A list of ascii fields used for Circuit ID or Remote ID.
dhcpSnoopingOption82FormatASCIIConfigurableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1
An ascii field entry for Circuit ID or Remote ID.
Indexes
Column Syntax OID
dhcpSnoopingOption82FormatASCIIConfigurableIndex
This object specifies the either circuit id or remote id for option82.
DhcpSnoopingOption82CircuitOrRemoteId
Type Values:
1circuitid
2remoteid
Description:
Circuit Id or Remote Id for Option 82 Format ASCII field.
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.1
dhcpSnoopingOption82FormatASCIIConfigurableField1
The type of the first field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII.
DhcpSnoopingOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP Snooping Option 82 Format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.2
dhcpSnoopingOption82FormatASCIIConfigurableField1StrVal
The string value of the first field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is …
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.3
dhcpSnoopingOption82FormatASCIIConfigurableField2
The type of the second field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII
DhcpSnoopingOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP Snooping Option 82 Format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.4
dhcpSnoopingOption82FormatASCIIConfigurableField2StrVal
The string value of the second field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.5
dhcpSnoopingOption82FormatASCIIConfigurableField3
The type of the third field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII
DhcpSnoopingOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP Snooping Option 82 Format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.6
dhcpSnoopingOption82FormatASCIIConfigurableField3StrVal
The string value of the third field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is …
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.7
dhcpSnoopingOption82FormatASCIIConfigurableField4
The type of the fourth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII
DhcpSnoopingOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP Snooping Option 82 Format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.8
dhcpSnoopingOption82FormatASCIIConfigurableField4StrVal
The string value of the fourth field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.9
dhcpSnoopingOption82FormatASCIIConfigurableField5
The type of the fifth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII
DhcpSnoopingOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP Snooping Option 82 Format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.10
dhcpSnoopingOption82FormatASCIIConfigurableField5StrVal
The string value of the fifth field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is …
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.11
dhcpSnoopingOption82FormatASCIIConfigurableDelimiter
The value of the delimiter that is inserted between the fields in
the Option 82 string in ASCII format, which will be copied to
Option-82 circuit id or remote id of the DHCP packet. This value is
applicable only, if the…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.12
dhcpSnoopingOption82FormatASCIIConfigurableStatus
This object specifies the status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.1.47.1.13

genericUdpServiceTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk genericUdpServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::genericUdpServiceTable' 
This table defines the Generic UDP Relay Service.
genericUdpServiceEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1
An entry in Generic UDP Relay table
Indexes
Column Syntax OID
genericUdpServiceUdpPort
UDP port for the service.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.1
genericUdpServiceDescription
The name and/or description of the service. If null string is passed
the default name will be used.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.2
genericUdpServiceStatRxFromClient
This keeps track of the number of packets received from the
client with UDP destination port matching genericUdpServiceUdpPort.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.3
genericUdpServiceRowStatus
Row Status for creating/deleting
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.1.1.4

genericUdpServiceDstTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk genericUdpServiceDstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::genericUdpServiceDstTable' 
This table defines the destination VLAN for the
Generic UDP Relay Service.  UDP packet with destination port
genericUdpServiceUdpPort are forwarded to VLAN defined in
genericUdpServiceDstVlan.
genericUdpServiceDstEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1
An entry in Generic UDP Relay table
Indexes
Column Syntax OID
genericUdpServicePort
UDP port for the service.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.1
genericUdpServiceDstVlan
Destination VLAN that the UPD port is to be forwarded to.
Unsigned32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.2
genericUdpServiceStatTxToVlan
This keeps track of the number of packets transmitted to the
destination VLAN with UDP destination port matching
genericUdpServicePort.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.3
genericUdpServiceDstTblRowStatus
Row Status for creating/deleting the Generic Service Destination Table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.2.1.4

alaGenericUdpServiceDstIpTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.4 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaGenericUdpServiceDstIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaGenericUdpServiceDstIpTable' 
This table defines the destination IP for the
Generic UDP Relay Service.  UDP packet with destination port
alaGenericUdpServiceDstUdpPort are forwarded to IP defined in
alaGenericUdpServiceDstIpAddress.
alaGenericUdpServiceDstIpEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.4.1
An entry in Generic UDP Relay destination Ip table.
Indexes
Column Syntax OID
alaGenericUdpServiceDstUdpPort
UDP port for the service.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.4.1.1
alaGenericUdpServiceDstIpType
This specifies the IP Address type of the
UDP Relay Server to forward the UDP packet.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.4.1.2
alaGenericUdpServiceDstIpAddress
This specifies the IP Address of the
UDP Relay Server to forward the UDP packet.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.4.1.3
alaGenericUdpServiceDstStatTxToIp
This keeps track of the number of packets transmitted to the
destination IP with UDP destination port matching
alaGenericUdpServiceDstUdpPort.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.4.1.4
alaGenericUdpServiceDstIpRowStatus
Row Status for creating/deleting the Generic Service Destination IP Table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.4.1.5

alaGenericUdpServiceSvcTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.5 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaGenericUdpServiceSvcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaGenericUdpServiceSvcTable' 
This table defines the destination SVC for the
generic UDP service. UDP packet with destination port
alaGenericUdpServiceSvcPort are forwarded to SVC defined in
alaGenericUdpServiceDstSvc.
alaGenericUdpServiceSvcEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.5.1
An entry in generic UDP service SVC table.
Indexes
Column Syntax OID
alaGenericUdpServiceSvcPort
UDP port for the service.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.5.1.1
alaGenericUdpServiceDstSvc
Destination SVC that the UDP port is to be forwarded to.
ALCATEL-ENT1-SERVICE-MGR-MIBAluServiceId
Type Constraints:
range: 0..65535
Description:
A 16-bit number used to identify a Service. This ID
must be unique within the Service Domain.
The value 0 is used as the null ID.
The value from 1 to 32767 is for static range.
The value from 32768 to 65534 is for dynam…
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.5.1.2
alaGenericUdpServiceStatTxToSvc
This keeps track of the number of packets transmitted to the
destination SVC with UDP destination port matching alaGenericUdpServiceSvcPort.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.5.1.3
alaGenericUdpServiceSvcRowStatus
Row status for creating/deleting the generic service destination SVC table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.2.5.1.4

dhcpSnoopingVlanTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk dhcpSnoopingVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::dhcpSnoopingVlanTable' 
A list of vlans that have DHCP Snooping enabled.
dhcpSnoopingVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.1.1
A DHCP Snooping VLAN entry.
Indexes
Column Syntax OID
dhcpSnoopingVlanNumber
The VLAN number identifying this instance. Valid
range from 1 to 4094.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.1.1.1
dhcpSnoopingVlanOpt82DataInsertionStatus
The DHCP Option-82 data insertion status. Default value is enabled,
which means once the VLAN is enabled for DHCP snooping, the
Option-82 field will be inserted in the DHCP packets between the
Relay Agent and the DHCP S…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.1.1.2
dhcpSnoopingVlanMacAddrVerificationStatus
The DHCP Snooping MAC Address verification status. Default value is
enabled. Once enabled, for all the incoming DHCP traffic to those
DHCP Snooping enabled vlan port, it compares the source MAC address
and the client Ha…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.1.1.3
dhcpSnoopingVlanStatus
Row Status for creating/deleting
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.1.1.4
dhcpSnoopingVlanAdminState
Admin status for enabling/disabling.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.1.1.5

dhcpSnoopingPortTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk dhcpSnoopingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::dhcpSnoopingPortTable' 
A list of ports that have DHCP Snooping trust status.
dhcpSnoopingPortEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1
A DHCP Snooping Port entry.
Indexes
Column Syntax OID
dhcpSnoopingPortIfIndex
The ifIndex subindex identifying this instance.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.1
dhcpSnoopingPortTrustMode
The DHCP Snooping's VLAN port's trust mode. Default value
is client-only, which means once the VLAN is enabled for DHCP
snooping, the vlan ports only allow DHCP client packets. Blocked
means all DHCP traffic is block on…
Enumerationr/w
Enumerated Values:
1blocked
2clientOnly
3trusted
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.2
dhcpSnoopingPortMacAddrViolation
This keeps track of the number of packets dropped due to DHCPi
packet with the source MAC Address not equal the client DHCP
Hardware address in the DHCP packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.3
dhcpSnoopingPortDhcpServerViolation
This keeps track of the number of packets dropped due to receiving
an DHCP server packet on a DHCP Snooping enabled port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.4
dhcpSnoopingPortOption82Violation
This keeps track of the number of packets dropped due to a relay
agent forards a packet that includes option 82 info to an untrusted
port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.5
dhcpSnoopingPortRelayAgentViolation
This keeps track of the number of packets dropped due to an DHCP
relay agent forwards a DHCP packate includes an relay agent ip
address that is not 0.0.0.0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.6
dhcpSnoopingPortBindingViolation
This keeps track of the number of packets dropped due to receiving
an DHCP Relase or DHCP Decline message that contains a MAC address
in the DHCP snooping binding table, but the interface information in
the binding tabl…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.7
dhcpSnoopingPortIpSourceFiltering
The DHCP Snooping IP Source filtering status. Default value
is disabled. Once enabled, only the incoming traffic with the proper
client IP address, MAC address and port will be allowed.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.2.1.8

dhcpSnoopingBindingTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk dhcpSnoopingBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::dhcpSnoopingBindingTable' 
DHCP Snooping binding table.
dhcpSnoopingBindingEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1
A DHCP Snooping binding entry.
Indexes
Column Syntax OID
dhcpSnoopingBindingMacAddress
The MAC Address subindex identifying this instance.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1.1
dhcpSnoopingBindingIfIndex
The IfIndex subindex identifying this instance. It is the
the interface where the DHCP request is coming in from.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1.2
dhcpSnoopingBindingIpAddress
The Ip Address offered by the DHCP Server to the Client.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1.3
dhcpSnoopingBindingVlan
It is the VLAN Id where the DHCP client belongs to.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1.4
dhcpSnoopingBindingLeaseTime
The lease time of the client's IP Address.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1.5
dhcpSnoopingBindingType
The learning/configuration nature of the binding entry.
Normally, the entries are learned dynamically, while it
also can be statically/manually configured.
Enumerationr/w
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1.6
dhcpSnoopingBindingRowStatus
Row Status for creating/deleting
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.3.1.7

dhcpSnoopingSourceFilterVlanTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.13 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk dhcpSnoopingSourceFilterVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::dhcpSnoopingSourceFilterVlanTable' 
A list of vlans that have ip-source-filtering enabled.
dhcpSnoopingSourceFilterVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.13.1
A Source Filtering enabled VLAN entry.
Indexes
Column Syntax OID
dhcpSnoopingSourceFilterVlanNumber
The VLAN number identifying this instance. Valid
range from 1 to 4094.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.13.1.1
dhcpSnoopingSourceFilterVlanFilteringStatus
The DHCP Snooping IP Source filtering row status. Default value
is disabled. Once enabled, only the incoming traffic with the proper
client IP address, MAC address , port and vlan will be allowed.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.13.1.2

dhcpSnoopingClearViolationTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.16 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk dhcpSnoopingClearViolationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::dhcpSnoopingClearViolationTable' 
This table is defined to clear DHCP snooping violation counters
on specific interface.
dhcpSnoopingClearViolationEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.16.1
Each entry defines variables used to clear violation statistics for given
interface index
Indexes
Column Syntax OID
dhcpSnoopingClearViolationIfIndex
The interface of which DHCP snooping violation counters are cleared.
The maximum value 2147483647 means all interfaces.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.16.1.1
dhcpSnoopingClearViolationAction
Used to clear DHCP snooping violation statistics.
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.4.16.1.2

alaDhcpRelayOption82FormatASCIIConfTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11 · 1 row entry · 13 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDhcpRelayOption82FormatASCIIConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaDhcpRelayOption82FormatASCIIConfTable' 
A list of ascii fields used for circuit ID or remote ID.
alaDhcpRelayOption82FormatASCIIConfEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1
An ascii field entry for circuit ID or remote ID.
Indexes
Column Syntax OID
alaDhcpRelayOption82FormatASCIIConfIndex
This object specifies the either circuit ID or remote ID for option82.
Enumeration
Enumerated Values:
1circuitid
2remoteid
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.1
alaDhcpRelayOption82FormatASCIIConfField1
The type of the first field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit ID or remote ID of the DHCP packet.
This field is applicable only, if the option 82 format type is ASCII
AlaDhcpRelayOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP relay Option-82 format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.2
alaDhcpRelayOption82FormatASCIIConfField1StrVal
The string value of the first field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit ID or remote ID of
the DHCP packet. This field is applicable only,if the option 82
format type is AS…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.3
alaDhcpRelayOption82FormatASCIIConfField2
The type of the second field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit ID or remote ID of the DHCP packet.
This field is applicable only, if the option 82 format type is ASCII
AlaDhcpRelayOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP relay Option-82 format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.4
alaDhcpRelayOption82FormatASCIIConfField2StrVal
The string value of the second field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit ID or remote ID of
the DHCP packet. This field is applicable only, if the option 82
format type is …
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.5
alaDhcpRelayOption82FormatASCIIConfField3
The type of the third field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit ID or remote ID of the DHCP packet.
This field is applicable only, if the option 82 format type is ASCII
AlaDhcpRelayOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP relay Option-82 format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.6
alaDhcpRelayOption82FormatASCIIConfField3StrVal
The string value of the third field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit ID or remote ID of
the DHCP packet. This field is applicable only, if the option 82
format type is A…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.7
alaDhcpRelayOption82FormatASCIIConfField4
The type of the fourth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit ID or remote ID of the DHCP packet.
This field is applicable only, if the option 82 format type is ASCII
AlaDhcpRelayOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP relay Option-82 format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.8
alaDhcpRelayOption82FormatASCIIConfField4StrVal
The string value of the fourth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit ID or remote ID of
the DHCP packet. This field is applicable only, if the option 82
format type is …
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.9
alaDhcpRelayOption82FormatASCIIConfField5
The type of the fifth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit ID or remote ID of the DHCP packet.
This field is applicable only, if the option 82 format type is ASCII
AlaDhcpRelayOption82ASCIIFieldTyper/w
Type Values:
0none
1macAddress
2systemName
3userString
4interfaceAlias
5vlan
6interface
7cvlan
Description:
DHCP relay Option-82 format ASCII field type
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.10
alaDhcpRelayOption82FormatASCIIConfField5StrVal
The string value of the fifth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit ID or remote ID of
the DHCP packet. This field is applicable only, if the option 82
format type is A…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.11
alaDhcpRelayOption82FormatASCIIConfDelimiter
The value of the delimiter that is inserted between the fields in the
option 82 string in ASCII format, which will be copied to Option-82
circuit ID or remote ID of the DHCP packet. This value is
applicable only, if the…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.12
alaDhcpRelayOption82FormatASCIIConfStatus
This object specifies the status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.11.1.13

alaDhcpRelayOpt82ErrStatsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDhcpRelayOpt82ErrStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaDhcpRelayOpt82ErrStatsTable' 
A list of Option 82 related error statistic count per port and per interface.
alaDhcpRelayOpt82ErrStatsEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.12.1
An entry in the ip dhcp relay Option 82 error statistics table
Indexes
Column Syntax OID
alaDhcpRelayOpt82ErrStatsIfIndex
The interface index where the DHCP packet ingress the switch that
caused the agent info violation or the invalid gateway
IP address error.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.12.1.1
alaDhcpRelayOpt82ErrStatsIfName
The interface name where the DHCP packet ingress the switch that
caused the agent info violation or the invalid gateway
IP address error.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.12.1.2
alaDhcpRelayOpt82ErrStatsAgentInfoViolation
The number of agent info violation seen on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.12.1.3
alaDhcpRelayOpt82ErrStatsInvalidGatewayIPAddr
The number of invalid gateway IP address seen on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.12.1.4
alaDhcpRelayOpt82ErrStatsReset
This parameter resets the ip dhcp relay Option 82 error statistics
on this interface. When the reset operation is done,
subsystem will change the value to noOpt (1). Subsystem will always return
noOpt (1).
Enumerationr/w
Enumerated Values:
1noOpt
2reset
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.1.12.1.5

alaDhcpRelayInterfaceTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.2 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDhcpRelayInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaDhcpRelayInterfaceTable' 
An IP DHCP Relay interface table.
alaDhcpRelayInterfaceEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.2.1
An IP DHCP interface entry.
Indexes
Column Syntax OID
alaDhcpRelayInterfaceName
IP interface name for which DHCP Relay is applicable.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.2.1.1
alaDhcpRelayInterfaceIpAddressType
Server IP address for DHCP Relay type.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.2.1.2
alaDhcpRelayInterfaceIpAddress
Server IP address for DHCP Relay.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.2.1.3
alaDhcpRelayInterfaceStatus
This object specifies the status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.2.1.4

alaDhcpRelayServerDestinationTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.3 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDhcpRelayServerDestinationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaDhcpRelayServerDestinationTable' 
Table allowing the creation and removal of DHCP
relay server destinations.
alaDhcpRelayServerDestinationEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.3.1
A DHCP relay server destination entry.
Indexes
Column Syntax OID
alaDhcpRelayServerDestinationAddressType
The address type of a DHCP relay server destination.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.3.1.1
alaDhcpRelayServerDestinationAddress
The address of a DHCP relay server destination.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.3.1.2
alaDhcpRelayServerDestinationRowStatus
Used to control the addition and removal of DHCP
relay server destinations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.3.1.3

alaDhcpRelayInterfaceAdminStateTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.4 · 1 row entry · 1 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDhcpRelayInterfaceAdminStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaDhcpRelayInterfaceAdminStateTable' 
An IP DHCP relay interface status table.
alaDhcpRelayInterfaceAdminStateEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.4.1
An IP DHCP interface status entry.
Indexes
Column Syntax OID
alaDhcpRelayInterfaceAdminStatus
DHCP relay administrative status on the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.4.1.1

alaDhcpRelayClearStatisticsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.5 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDhcpRelayClearStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaDhcpRelayClearStatisticsTable' 
An IP DHCP relay clear interface statistics table.
alaDhcpRelayClearStatisticsEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.5.1
An IP DHCP clear interface statistics entry.
Indexes
Column Syntax OID
alaDhcpRelayClearStatisticsInterfaceName
IP interface statistics name for which DHCP relay is applicable.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.5.1.1
alaDhcpRelayClearStatisticsIpAddressType
Server IP address for DHCP relay type.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.5.1.2
alaDhcpRelayClearStatisticsIpAddress
Server IP address for DHCP relay.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.5.1.3
alaDhcpRelayClearStatisticsAction
Clears the DHCP relay lease statistics.
Enumerationr/w
Enumerated Values:
1none
2clear
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.5.1.4

alaDhcpRelayStatTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.6 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDhcpRelayStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaDhcpRelayStatTable' 
This keeps statistics for each next hop IP address
alaDhcpRelayStatEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.6.1
An entry in the stat table.
Indexes
Column Syntax OID
alaDhcpRelayStatInterfaceName
IP interface name for which IP DHCP Relay is applicable.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-63
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.6.1.1
alaDhcpRelayStatNextHopIpAddrType
This specifies the server address type.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.6.1.2
alaDhcpRelayStatNextHopIpAddr
This specifies the unique server address.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.6.1.3
alaDhcpRelayStatTxToNextHop
This keeps track of the number of packets transmitted to the server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.6.1.4
alaDhcpRelayStatInvalidAgentInfoOptFromServer
This keeps track of the number of packets dropped due to
invalid from DHCP server with Relay Agent Information option
in the DHCP packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.6.6.1.5

alaGenericUdpv6ServiceTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.1 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaGenericUdpv6ServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaGenericUdpv6ServiceTable' 
This table defines the IPv6 UDP relay service.
alaGenericUdpv6ServiceEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.1.1
An entry in IPv6 UDP relay service table.
Indexes
Column Syntax OID
alaGenericUdpv6ServiceUdpPort
UDP port for the service.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.1.1.1
alaGenericUdpv6ServiceDescription
The name and/or description of the service. If null string is passed
the default name will be used.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.1.1.2
alaGenericUdpv6ServiceStatRxFromClient
This keeps track of the number of packets received from the
client with IPv6 UDP destination port matching alaGenericUdpv6ServiceUdpPort.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.1.1.3
alaGenericUdpv6ServiceRowStatus
Row status for creating/deleting.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.1.1.4

alaGenericUdpv6ServiceDstTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.2 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaGenericUdpv6ServiceDstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaGenericUdpv6ServiceDstTable' 
This table defines the destination for the	 
IPv6 UDP relay service. IPv6 UDP packet with destination port	 
alaGenericUdpv6ServiceDstPort are forwarded to defined in	 
alaGenericUDPv6ServiceDstType.
alaGenericUdpv6ServiceDstEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.2.1
An entry in IPv6 UDP relay table.
Indexes
Column Syntax OID
alaGenericUdpv6ServiceDstType
This specifies the IPv6 UDP relay destination type to forward the UDP packet.
Enumeration
Enumerated Values:
1vlan
2service
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.2.1.1
alaGenericUdpv6ServiceDstPort
UDP port for the service.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.2.1.2
alaGenericUdpv6ServiceDstId
Identifier of the destination where the UDP packet is to be forwarded.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.2.1.3
alaGenericUdpv6ServiceDstStatTxToDst
This keeps track of the number of packets transmitted to the
destination with IPv6 UDP relay destination port matching
alaGenericUdpv6ServiceDstPort.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.2.1.4
alaGenericUdpv6ServiceDstRowStatus
Row status for creating/deleting the IPv6 UDP relay service table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.2.1.5

alaGenericUdpv6ServiceDstIpTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.3 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaGenericUdpv6ServiceDstIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-UDP-RELAY-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-UDP-RELAY-MIB::alaGenericUdpv6ServiceDstIpTable' 
This table defines the destination IPv6 for the
IPv6 UDP relay service. UDP packet with destination port
alaGenericUdpv6ServiceDstUdpPort are forwarded to IPv6 UDP defined in
alaGenericUdpv6ServiceDstIpAddress.
alaGenericUdpv6ServiceDstIpEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.3.1
An entry in IPv6 UDP relay destination IPv6 table.
Indexes
Column Syntax OID
alaGenericUdpv6ServiceDstUdpPort
UDP port for the service.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.3.1.1
alaGenericUdpv6ServiceDstIpType
This specifies the IPv6 address type of the
IPv6 UDP relay server to forward the UDP packet.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
2ipv6
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.3.1.2
alaGenericUdpv6ServiceDstIpAddress
This specifies the IPv6 address of the
IPv6 UDP relay server to forward the UDP packet.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 16-16
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.3.1.3
alaGenericUdpv6ServiceDstStatTxToIp
This keeps track of the number of packets transmitted to the
destination IPv6 with IPv6 UDP destination port matching
alaGenericUdpv6ServiceDstUdpPort.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.3.1.4
alaGenericUdpv6ServiceDstIpRowStatus
Row status for creating/deleting the alaGeneric service destination IPv6 table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.9.1.1.7.3.1.5