bsnGlobalDot11bDynamicChannelAssignment

AIRESPACE-WIRELESS-MIB · .1.3.6.1.4.1.14179.2.3.2.1.3
MIB view Table view

Object

scalar r/w Enumeration 
Dynamic channel assignment(DCA) has three modes. When the mode
is auto, the channel assignment will be periodically updated for
all Airespace APs that permit this operation. When the DCA is 
runOnce, channel assignments are updated based on the UPDATE_CMD 
received from the management. When the DCA is static, no dynamic 
channel assignments occurs and value are set to their global 
default.  Default is auto.

Context

MIB
AIRESPACE-WIRELESS-MIB
OID
.1.3.6.1.4.1.14179.2.3.2.1.3
Type
scalar
Access
readwrite
Status
current
Parent
bsnGlobalDot11bConfig
Siblings
34

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bsnGlobalDot11bNetworkStatus
802.11b Network Admin Status.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.1
bsnGlobalDot11bDynamicTxPowerControlInterval
When Tx PowerControl dynamic alogirthm is running, this interval(in secs) specifies how often TxPower control updates are attempted on an Airespace AP. NOTE: hysteresis is build i…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14179.2.3.2.1.10
bsnGlobalDot11bCurrentTxPowerLevel
The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA.
scalarInteger32.1.3.6.1.4.1.14179.2.3.2.1.11
bsnGlobalDot11bInputsForDTP
This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding bits identifiers. options …
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14179.2.3.2.1.12
bsnGlobalDot11bPowerUpdateCmdInvoke
When set to activate this starts a DTP calculation regardless of the dynamic update interval. This command should be invoke on Group Leader Airespace Switch.Invoking on a Airesp…
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.13
bsnGlobalDot11bPowerUpdateCmdStatus
After setting bsnGlobalDot11aChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.14179.2.3.2.1.14
bsnGlobalDot11bDataRate1Mhz
Specify if this rate is supported or mandatory or disabled
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.15
bsnGlobalDot11bDataRate2Mhz
Specify if this rate is supported or mandatory or disabled
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.16
bsnGlobalDot11bDataRate5AndHalfMhz
Specify if this rate is supported or mandatory or disabled
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.17
bsnGlobalDot11bDataRate11Mhz
Specify if this rate is supported or mandatory or disabled
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.18
bsnGlobalDot11bShortPreamble
802.11b Short Preamble.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.19
bsnGlobalDot11bBeaconPeriod
This attribute shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmitted in Beacon and Probe Response frames.
scalarInteger32.1.3.6.1.4.1.14179.2.3.2.1.2
bsnGlobalDot11bDot11gSupport
This attribute is enabled to also support 802.11g protocol on the 802.11b network. Enabling 802.11g allows additional data rates: 6, 9, 12, 18, 24, 36, 48, 54 Mbps.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.20
bsnGlobalDot11bDataRate6Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.21
bsnGlobalDot11bDataRate9Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.22
bsnGlobalDot11bDataRate12Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.23
bsnGlobalDot11bDataRate18Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.24
bsnGlobalDot11bDataRate24Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.25
bsnGlobalDot11bDataRate36Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.26
bsnGlobalDot11bDataRate48Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.27
bsnGlobalDot11bDataRate54Mhz
Specify if this rate is supported or mandatory or disabled. This is configurable only if 802.11g support is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.28
bsnGlobalDot11bPicoCellMode
Configures the 802.11b pico-cell mode. This cannot be enabled when the Fast Roaming Mode is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.29
bsnGlobalDot11bFastRoamingMode
Configures the 802.11b fast-roaming mode. This cannot be enabled when the Pico Cell Mode is enabled.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.30
bsnGlobalDot11bFastRoamingVoipMinRate
Configures the minimum transmission rate allowed for VoIP on any 802.11b radio.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.31
bsnGlobalDot11bFastRoamingVoipPercentage
Configures the percentage of effective bandwidth for the minimum rate reserved for VoIP.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.32
bsnGlobalDot11b80211eMaxBandwidth
This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11b network. The value of this attribute can vary…
scalarInteger32.1.3.6.1.4.1.14179.2.3.2.1.33
bsnGlobalDot11bDTPCSupport
This attribute may be used to enable the DTPC support on all 802.11b/g radios. DTPC or Dynamic Transmit Power Control support means that the radio's transmit power will be advert…
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.34
bsnGlobalDot11bRxSopThreshold
This attribute may be used to configure Rxsop or receiver start of packet custom values for 802.11b/g radios.
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.35
bsnGlobalDot11bCurrentChannel
The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2. This attribute will be read-only if bsnAPIfPhyChannelAutomaticOn is tru…
scalarInteger32.1.3.6.1.4.1.14179.2.3.2.1.4
bsnGlobalDot11bDynamicChannelUpdateInterval
When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is built int…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14179.2.3.2.1.5
bsnGlobalDot11bInputsForDCA
This attribute is a bit mask specifying what to include in DCA optimization.Below is a list of parameters and their corresponding bits identifiers. options …
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.14179.2.3.2.1.6
bsnGlobalDot11bChannelUpdateCmdInvoke
When set to activate this starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Group Leader Airespace Switch.Invoking on a Airespac…
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.7
bsnGlobalDot11bChannelUpdateCmdStatus
After setting bsnGlobalDot11bChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.14179.2.3.2.1.8
bsnGlobalDot11bDynamicTransmitPowerControl
Dynamic transmit power (DTP) has three modes. When the mode is auto, the transmit power of each Airespace AP will be periodically updated for all Airespace APs that permit this …
scalarEnumeration.1.3.6.1.4.1.14179.2.3.2.1.9