bsnAcceptSelfSignedCertificate
AIRESPACE-WIRELESS-MIB ·
.1.3.6.1.4.1.14179.2.3.1.48
Object
scalar
r/w
Enumeration
This flag specifies if controller will accept Self Signed Certificate from AP as part of authorization.
Context
- MIB
- AIRESPACE-WIRELESS-MIB
- OID
.1.3.6.1.4.1.14179.2.3.1.48- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- bsnGlobalDot11Config
- Siblings
- 41
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bsnGlobalDot11PrivacyOptionImplemented This attribute, when true, shall indicate that the IEEE
802.11 WEP option is implemented. The default value of
this attribute shall be false. | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.1 |
| bsnSystemCurrentTime This attribute will display the Current System time on the
Switch. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.3.1.10 |
| bsnUpdateSystemTime Use this attribute to change the System time on the Switch.
Specify the new time in this Format MM/DD/YYYY HH:MM:SS | scalar | OctetString | .1.3.6.1.4.1.14179.2.3.1.11 |
| bsnOperatingTemperatureEnvironment Operating Environment of the Airespace Switch.
commercial is Commercial (0 to 40 C) and
industrial is Industrial (-10 to 70 C) | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.12 |
| bsnSensorTemperature Current Internal Temperature of the unit in Centigrade | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14179.2.3.1.13 |
| bsnTemperatureAlarmLowLimit Internal Temperature Alarm Low Limit in Centigrade. If the
bsnSensorTemperature goes below this limit
bsnSensedTemperatureTooLow Alarm will be sent out | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14179.2.3.1.14 |
| bsnTemperatureAlarmHighLimit Internal Temperature Alarm High Limit in Centigrade. If the
bsnSensorTemperature goes above this limit
bsnSensedTemperatureTooHigh Alarm will be sent out | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14179.2.3.1.15 |
| bsnVirtualGatewayAddress Virtual Gateway Address of the Switch. This is used by web
auth and Ipsec. If the virtual IP Address is changed, the
Switch has to be rebooted for the new Address to take effect.… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.2.3.1.16 |
| bsnRFMobilityDomainName RF Mobility Group Name to which this Airespace Switch belongs.
Airespace Switches on a network form a RF Group as well as a
Mobility Group. RF Groups does the channel and power
m… | scalar | OctetString | .1.3.6.1.4.1.14179.2.3.1.17 |
| bsnClientWatchListFeature This flag should be turned on for the client watch lists
to be enabled on the switch. When enabled, the switch
generates Client Association and Authentication traps for
the watch… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.18 |
| bsnRogueLocationDiscoveryProtocol This flag should be turned on to enable the Rogue
Location Discovery Protocol feature on the switch.
We can either enable this feature for all the APs
or only for APs in monitor m… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.19 |
| bsnGlobalDot11AuthenticationResponseTimeOut This attribute shall specify the number of TU that a
responding STA should wait for the next frame in the
authentication sequence. | scalar | Unsigned32 | .1.3.6.1.4.1.14179.2.3.1.2 |
| bsnRogueAutoContainFeature This flag should be turned on to allow the switch to
contain the rogues automatically if detected
on the wired network. | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.20 |
| bsnOverAirProvisionApMode Over the Air Provisioning Mode for APs | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.21 |
| bsnMaximumNumberOfConcurrentLogins This attribute specifies the maximum number of
concurrent logins that the switch will allow for a
single user. A value 0 implies that there is
no restriction on the number of co… | scalar | Integer32 | .1.3.6.1.4.1.14179.2.3.1.22 |
| bsnAutoContainRoguesAdvertisingSsid This flag should be set to 1 to allow the switch to
contain automatically those rogues that are
advertising our SSID. If value is 0, only an alarm
will be generated when such a … | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.23 |
| bsnAutoContainAdhocNetworks This flag should be set to 1 to allow the switch to
contain automatically the adhoc networks
detected by the switch. If value is 0, only an alarm
will be generated when such a ne… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.24 |
| bsnAutoContainTrustedClientsOnRogueAps This flag should be set to 1 to allow the switch to
contain automatically those trusted clients that
are associated to rogue APs. If value is 0, only an
alarm will be generated w… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.25 |
| bsnValidateRogueClientsAgainstAAA This flag should be turned on to allow the switch to
validate 'valid' mobiles associating with rogue APs.
For example, if a client's MAC Address is found in
the local MAC filter … | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.26 |
| bsnSystemTimezoneDelta The delta (difference) between the local time and the
Universal Coordinated Time in hours.
For example, it is -8 for the PST and +1 for France. If
the delta is -5.30 then this at… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14179.2.3.1.27 |
| bsnSystemTimezoneDaylightSavings obsolete This flag specifies if daylight savings are enabled for
the current timezone. | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.28 |
| bsnAllowAuthorizeApAgainstAAA This flag specifies if LWAPP is allowed to get
authorization via RADIUS or local database for an AP. | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.29 |
| bsnGlobalDot11MultiDomainCapabilityImplemented This attribute, when TRUE, indicates that the
station implementation is capable of supporting
multiple regulatory domains. The capability is
disabled, otherwise. The default val… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.3 |
| bsnSystemTimezoneDeltaMinutes The minutes component of delta (difference) between the
local time and the Universal Coordinated Time. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14179.2.3.1.30 |
| bsnApFallbackEnabled This flag specifies if the APs should continue LWAPP
discoveries to fallback to the primary switch
in case they are not already associated with it i.e they
are associated with th… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.31 |
| bsnAppleTalkEnabled This flag turns on the appletalk bridging in the switch
such that the packets from Apple clients that use
appletalk format can be processed by the switch. When
this flag is off, … | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.32 |
| bsnGlobalDot11MultiDomainCapabilityEnabled This attribute, when TRUE, indicates that the
capability of the station to operate in multiple
regulatory domains is enabled. The capability is
disabled, otherwise. The default … | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.4 |
| bsnTrustedApPolicyConfig | node | - | .1.3.6.1.4.1.14179.2.3.1.40 |
| bsnClientExclusionPolicyConfig | node | - | .1.3.6.1.4.1.14179.2.3.1.41 |
| bsnSignatureConfig | node | - | .1.3.6.1.4.1.14179.2.3.1.42 |
| bsnRfIdTagConfig | node | - | .1.3.6.1.4.1.14179.2.3.1.43 |
| bsnAPNeighborAuthConfig | node | - | .1.3.6.1.4.1.14179.2.3.1.44 |
| bsnRFNetworkName RF Network Group Name to which this Airespace Switch belongs.
Airespace Switches on a network form a RF Network Group as
well as a Mobility Group. RF Network Groups does the chan… | scalar | OctetString | .1.3.6.1.4.1.14179.2.3.1.45 |
| bsnFastSSIDChangeFeature Configures Fast SSID changing feature for mobile-stations.
When enabled, permits mobile-stations to change SSIDs without
having to block and wait for SSID-cleanup on the switch t… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.46 |
| bsnBridgingPolicyConfig | node | - | .1.3.6.1.4.1.14179.2.3.1.47 |
| bsnSystemClockTime This object represents the current clock time
of the controller and expressed as the number of
seconds elapsed since 00:00:00 on
January 1, 1970, Coordinated Universal Time (UTC… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14179.2.3.1.49 |
| bsnGlobalDot11CountryIndex deprecated This attribute identifies the country in which the
station is operating. | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.5 |
| bsnGlobalDot11LoadBalancing deprecated This attribute specifies if load balancing of clients is
enabled on disabled.
Global configuration of Load Balancing is now removed.
Use cLWlanLoadBalancingEnable to co… | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.6 |
| bsnGlobalDot11RogueTimer This attribute specifies in seconds, the time interval after
which a Rogue Entry in Rogue Table will expire if no beacon
is heard from a Rogue. | scalar | Integer32 | .1.3.6.1.4.1.14179.2.3.1.7 |
| bsnPrimaryMwarForAPs This attribute specifies if this Switch acts a Master Switch
for the Airespace APs.
So if an Airespace AP doesn't find its Primary Switch, it will
associate with this Switch. | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.8 |
| bsnRtpProtocolPriority Real Time Protocol Priority. | scalar | Enumeration | .1.3.6.1.4.1.14179.2.3.1.9 |