ZTE-AN-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
55

zxAnVlanTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanTable' 
A table containing VLAN information for VLANs
configured into the bridge by (local or network)
management,  specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.
zxAnVlanEntry row .1.3.6.1.4.1.3902.1082.40.50.2.1.2.1
Filtering information configured into the bridge by
management, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded. It is forb…
Indexes
Column Syntax OID
zxAnVid
The VlanId to which
this entry's filtering information applies.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.1
zxAnVlanName
DURABLE: { 'Default' }
An administratively assigned string, which may be used
to identify the VLAN.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.2
zxAnVlanDesc
The description of VLAN.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.3
zxAnVlanRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.50

zxAnVlanIfConfTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.1.4 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfConfTable' 
A table containing VLAN Port information for VLANs
configured into the bridge by (local or network)
management,  specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.
zxAnVlanIfConfEntry row .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1
Filtering information configured into the bridge by
management, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded.
Indexes
Column Syntax OID
zxAnVlanIfConfMode
The access mode of the port.
Enumerationr/w
Enumerated Values:
1access
2trunk
3hybrid
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.1
zxAnVlanIfConfTlsEnable
The Transparent LAN Service enable or disable.
When port in access mode, TLS always disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.2
zxAnVlanIfConfTlsSVid
The TLS vlan id of the port.
Only TLS enable, TLS Vlan id can be configured.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.3
zxAnVlanIfConfDefaultVid
The default VLAN of the port.
'0' indicates not configured.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.4
zxAnVlanIfConfDefaultCVid
The default CVLAN of the port.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.5
zxAnVlanIfConfUntaggedVlanList
The Untagged vlan sequence to a Port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.6
zxAnVlanIfConfTaggedVlanList
The Tagged vlan sequence to a Port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.7
zxAnVlanIfConfTpid
The outer VLAN TPID of this port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.8
zxAnVlanIfIngressFilterEnable
When this is enable(1) the port will reject incoming frames for
VLAN only if the port belongs to that vlan. When this is
disable(2), the port will accept all incoming frames,regardless
of the the port's vlan membersh…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.9
zxAnVlanIfAcceptableFrameTypes
When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be acc…
Enumerationr/w
Enumerated Values:
1admitAll
2admitOnlyVlanTagged
3admitOnlyVlanUntagged
4admitOnlyVlanSingleTagged
5admitOnlyVlanMaxDoubleTagged
6admitOnlyVlanMaxSingleTagged
7admitOnlyVlanDoubleTagged
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10
zxAnVlanIfConfTpidEnable
Enable or disable zxAnVlanIfConfTpid.

enabled(1) -- Apply the out VLAN TPID with zxAnVlanIfConfTpid.
disabled(2) -- Apply the out VLAN TPID with zxAnVlanConfTpid in the
zxAnVlanConfTpidTa…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.11

zxAnVlanIfConfVlanTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.1.9 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanIfConfVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfConfVlanTable' 
VLAN configuration table.
This table is only used for getting VLAN information (network-side 
SVLAN of service port function) when operating on EPON/GPON ports.
This table is used for setting and getting VLAN information when 
operating on uplink ports.
This table is used for setting and getting VLAN information when 
operating on DSL ports.
zxAnVlanIfConfVlanEntry row .1.3.6.1.4.1.3902.1082.40.50.2.1.9.1
VLAN configuration entry.
Indexes
Column Syntax OID
zxAnVlanIfConfVlanTagVlanList
Tagged VLAN list in the port.
A bit value of 1 indicates the associated VLAN is in the port.
OctetStringr/w
Constraints:
range: 512-512
 .1.3.6.1.4.1.3902.1082.40.50.2.1.9.1.1
zxAnVlanIfConfVlanUntagVlanList
Untagged VLAN list in the port.
A bit value of 1 indicates the associated VLAN is in the port.
OctetStringr/w
Constraints:
range: 512-512
 .1.3.6.1.4.1.3902.1082.40.50.2.1.9.1.2

zxAnVlanExtPortListIITable

table
.1.3.6.1.4.1.3902.1082.40.50.2.1.10 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanExtPortListIITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanExtPortListIITable' 
Port list based on VLAN table.
zxAnVlanExtPortListIIEntry row .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1
Port list based on VLAN entry.
Indexes
Column Syntax OID
zxAnVlanExtPortListIIRack
Rack index for port list on the VLAN.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.1
zxAnVlanExtPortListIIShelf
Shelf index for port list on the VLAN.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.2
zxAnVlanExtPortListIISlot
Slot index for port list on the VLAN.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.3
zxAnVlanExtPortListIIPort
Port index for port list on the VLAN.
Value 0 means non-PON port, other values means EPON/GPON port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.4
zxAnVlanExtPortListIISegment
The segment of ONU that contains the port list.
The segment will range from 1 to 16 when the port is EPON/GPON
port.
The segment will be always 1 when the port is non-PON port.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.5
zxAnVlanExtPortUntagPortListII
Untagged ports of the VLAN.
ZTE-AN-TC-MIBZxAnPortList
Description:
ZxAnPortList reprensents a map of ports. It uses a complex coding
to construct a OCTET STRING.
ZxAnPortList is consisted of many physical port units. Each port
unit is the type of OCTET STRING which including some bi…
 .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.6
zxAnVlanExtPortTagPortListII
Tagged ports of the VLAN.
ZTE-AN-TC-MIBZxAnPortList
Description:
ZxAnPortList reprensents a map of ports. It uses a complex coding
to construct a OCTET STRING.
ZxAnPortList is consisted of many physical port units. Each port
unit is the type of OCTET STRING which including some bi…
 .1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.7

zxAnVlanIfExtTransTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.3.5 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanIfExtTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfExtTransTable' 
VLAN translation extension table. 
This table is an extension of the table zxAnVlanIfTransTable.
This table includes VLAN translation information for single tagged 
packets, and double tagged packets.
zxAnVlanIfExtTransEntry row .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1
VLAN Translation extension entry.
Indexes
Column Syntax OID
zxAnVlanIfExtTransIngressVid
Ingress VID for VLAN translation.
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.1
zxAnVlanIfExtTransIngressCVid
Ingress C-VID for VLAN translation.
'0' means the packet to be translated is single tagged packet.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.2
zxAnVlanIfExtTransVid
VID after VLAN translation.
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.3
zxAnVlanIfExtTransCVid
C-VID after VLAN translation.
'0' means the packet after VLAN translation is single tagged
packet.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.4
zxAnVlanIfExtTransCos
VLAN CoS after VLAN translation.
Value '0xFF' indicates not configured.
Integer32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.5
zxAnVlanIfExtTransCtagCos
CVLAN CoS after VLAN translation.
Value '0xFF' indicates not configured.
Integer32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.6
zxAnVlanIfExtTransRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.50

zxAnVlanBasedFwdTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.6.3 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanBasedFwdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanBasedFwdTable' 
This table includes VLAN based forward rule configuration.
zxAnVlanBasedFwdEntry row .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1
An entry in zxAnVlanBasedFwdTable.
Indexes
Column Syntax OID
zxAnVlanBasedFwdSVid
SVlan ,it shouled be included in the zxAnBasedFwdVlanTable
ZTE-AN-TC-MIBVlanId
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.1
zxAnVlanBasedFwdCVid
cvlan
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.2
zxAnVlanBasedFwdIfIndex
An index for port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.3
zxAnVlanBasedFwdSubIfIndex
An index for port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
 .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.4
zxAnVlanBasedFwdOtherIfIndex
An index of the other port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.5
zxAnVlanBasedFwdOtherSubIfIndex
An index of the other port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
 .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.6
zxAnVlanBasedFwdRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.50

zxAnVlanBasedFwdConfTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.6.4 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanBasedFwdConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanBasedFwdConfTable' 
This table includes VLAN based forward configuration information.
zxAnVlanBasedFwdConfEntry row .1.3.6.1.4.1.3902.1082.40.50.2.6.4.1
An entry in zxAnVlanBasedFwdConfTable.
Indexes
Column Syntax OID
zxAnVlanBasedFwdConfMode
VLAN based forwarding mode.
vlan1To1(1) - Forwarding the packets with the S-VID configured in
the zxAnVlanBasedFwdTable. When user-side interface
in the zxAnVlanBasedFwdTable is deleted, the …
Enumerationr/w
Enumerated Values:
1vlan1To1
2vlanAndMac
 .1.3.6.1.4.1.3902.1082.40.50.2.6.4.1.1

zxAnVlanTpidConfTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.9.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanTpidConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanTpidConfTable' 
A table containing VLAN TPID information.
zxAnVlanTpidConfEntry row .1.3.6.1.4.1.3902.1082.40.50.2.9.2.1
Entry for zxAnVlanTpidConfTable.

The multi-variables binding rule should be complied with when a
manager creates a VLAN TPID. According to this rule, all the
related mib variables must be included in one …
Indexes
Column Syntax OID
zxAnVlanTpidConfTpid
This object indicates the outer VLAN TPID of this VLAN.
Value define uses hex.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.40.50.2.9.2.1.1
zxAnVlanTpidConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.9.2.1.50

zxAnVlanForwardingCtrlTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.10.2 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanForwardingCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanForwardingCtrlTable' 
A table containing VLAN forwarding control information.
zxAnVlanForwardingCtrlEntry row .1.3.6.1.4.1.3902.1082.40.50.2.10.2.1
Entry for zxAnVlanForwardingCtrlTable.
Indexes
Column Syntax OID
zxAnVlanMcastForwardingCtrl
The multicast packet forwarding control.
Enumerationr/w
Enumerated Values:
1floodUnknown
2dropUnknown
3floodAll
 .1.3.6.1.4.1.3902.1082.40.50.2.10.2.1.1

zxAnVlanProtocolFilterConfTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.11.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanProtocolFilterConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanProtocolFilterConfTable' 
A table containing VLAN protocol filter information.
zxAnVlanProtocolFilterConfEntry row .1.3.6.1.4.1.3902.1082.40.50.2.11.2.1
Entry for zxAnVlanProtocolFilterConfTable.
Indexes
Column Syntax OID
zxAnVlanProtoFilterConfEthType
EtherType.
pppoe(1) - EtherType is PPPoE.
ipoe(2) - EtherType is IPoE.
Enumerationr/w
Enumerated Values:
1pppoe
2ipoe
 .1.3.6.1.4.1.3902.1082.40.50.2.11.2.1.1
zxAnVlanProtoFilterConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.11.2.1.50

zxAnVlanTpidFilterConfTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.12.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanTpidFilterConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanTpidFilterConfTable' 
A table containing TPIDs to filter the packets.
Packets will be discarded when the TPID is mismatched.
zxAnVlanTpidFilterConfEntry row .1.3.6.1.4.1.3902.1082.40.50.2.12.2.1
A zxAnVlanTpidFilterConfTable entry.

When the S-tag TPID filtering is configured in the
zxAnVlanIfTpidFilterConfTable, the interface will filter the
packets with zxAnVlanIfTpidFilterStagTpid.

W…
Indexes
Column Syntax OID
zxAnVlanTpidFilterConfIfType
Interface type.
Enumeration
Enumerated Values:
1pon
2uplink
3ptp
 .1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.1
zxAnVlanTpidFilterConfStagTpid
Outer VLAN TPIDs.
This object indicates up to four outer VLAN TPIDs of the interface,
separated by commas, e.g., '0x8100', '0x8100,0x9100'.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.2
zxAnVlanTpidFilterConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.50

zxAnVlanIfTpidFilterConfTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.12.3 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanIfTpidFilterConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanIfTpidFilterConfTable' 
A table containing TPIDs of the interface to filter the packets.
Packets will be discarded when the TPID is mismatched.
zxAnVlanIfTpidFilterConfEntry row .1.3.6.1.4.1.3902.1082.40.50.2.12.3.1
A zxAnVlanIfTpidFilterConfTable entry.
Indexes
Column Syntax OID
zxAnVlanIfTpidFilterStagTpid
Outer VLAN TPIDs.
This object indicates up to four outer VLAN TPIDs of the interface,
separated by commas, e.g., '0x8100', '0x8100,0x9100'.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.50.2.12.3.1.1
zxAnVlanIfTpidFilterRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.12.3.1.50

zxAnVlanCopyCosToInnerTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.13.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanCopyCosToInnerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanCopyCosToInnerTable' 
A table containing modifying inner CoS information.
zxAnVlanCopyCosToInnerEntry row .1.3.6.1.4.1.3902.1082.40.50.2.13.2.1
Entry for zxAnVlanCopyCosToInnerTable.
Indexes
Column Syntax OID
zxAnVlanCopyCosToInnerDirection
Direction.
Enumerationr/w
Enumerated Values:
1ingress
 .1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.1
zxAnVlanCopyCosToInnerMode
networkSide(1) - The rule is used in network side.
Enumerationr/w
Enumerated Values:
1networkSide
 .1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.2
zxAnVlanCopyCosToInnerRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.50

zxAnVlanCopyCosToOuterTable

table
.1.3.6.1.4.1.3902.1082.40.50.2.13.3 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnVlanCopyCosToOuterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-VLAN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-VLAN-MIB::zxAnVlanCopyCosToOuterTable' 
A table containing modifying outer CoS information.
zxAnVlanCopyCosToOuterEntry row .1.3.6.1.4.1.3902.1082.40.50.2.13.3.1
Entry for zxAnVlanCopyCosToOuterTable.
Indexes
Column Syntax OID
zxAnVlanCopyCosToOuterDirection
Direction.
Enumerationr/w
Enumerated Values:
1ingress
 .1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.1
zxAnVlanCopyCosToOuterMode
networkSide(1) - The rule is used in network side.
Enumerationr/w
Enumerated Values:
1networkSide
 .1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.2
zxAnVlanCopyCosToOuterRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.50