MPLS-VPN-MIB Table View

This table specifies per-interface MPLS capability
and associated information.

mplsVpnInterfaceConfEntry row .1.3.6.1.3.118.1.2.1.1

An entry in this table is created by an LSR for
every interface capable of supporting MPLS/BGP VPN.


Each entry in this table is meant to correspond to
an entry in the Interfaces Table.

Indexes

mplsVpnVrfName mplsVpnInterfaceConfIndex

Column	Syntax	OID
mplsVpnInterfaceConfIndex This is a unique index for an entry in the MplsVPNInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in the MPLS-VPN-layer in the ifTable. Note that this table …	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.3.118.1.2.1.1.1
mplsVpnInterfaceLabelEdgeType Either the providerEdge(0) (PE) or customerEdge(1) (CE) bit MUST be set.	Enumeration Enumerated Values: 1 providerEdge 2 customerEdge	.1.3.6.1.3.118.1.2.1.1.2
mplsVpnInterfaceVpnClassification Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario.	Enumerationr/w Enumerated Values: 1 carrierOfCarrier 2 enterprise 3 interProvider	.1.3.6.1.3.118.1.2.1.1.3
mplsVpnInterfaceVpnRouteDistProtocol Denotes the route distribution protocol across the PE-CE link. Note that more than one routing protocol may be enabled at the same time.	Bitsr/w Enumerated Values: 0 dummy 1 none 2 bgp 3 ospf 4 rip 5 isis 6 other	.1.3.6.1.3.118.1.2.1.1.4
mplsVpnInterfaceConfStorageType The storage type for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.3.118.1.2.1.1.5
mplsVpnInterfaceConfRowStatus The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation succeeds, the interface will h…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.3.118.1.2.1.1.6

This table specifies per-interface MPLS/BGP VPN
VRF Table capability and associated information.
Entries in this table define VRF routing instances
associated with MPLS/VPN interfaces. Note that
multiple interfaces can belong to the same VRF
instance. The collection of all VRF instances
comprises an actual VPN.

mplsVpnVrfEntry row .1.3.6.1.3.118.1.2.2.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. The
indexing provides an ordering of VRFs per-VPN
interface.

Indexes

mplsVpnVrfName

Column	Syntax	OID
mplsVpnVrfName The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID.	MplsVpnId Type Constraints: range: 0..31	.1.3.6.1.3.118.1.2.2.1.1
mplsVpnVrfDescription The human-readable description of this VRF.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.3.118.1.2.2.1.2
mplsVpnVrfRouteDistinguisher The route distinguisher for this VRF.	MplsVpnRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.3.118.1.2.2.1.3
mplsVpnVrfCreationTime The time at which this VRF entry was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.3.118.1.2.2.1.4
mplsVpnVrfOperStatus Denotes whether a VRF is operational or not. A VRF is up(1) when at least one interface associated with the VRF, which ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one i…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.3.118.1.2.2.1.5
mplsVpnVrfActiveInterfaces Total number of interfaces connected to this VRF with ifOperStatus = up(1). This counter should be incremented when: a. When the ifOperStatus of one of the c…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.2.1.6
mplsVpnVrfAssociatedInterfaces Total number of interfaces connected to this VRF (independent of ifOperStatus type).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.2.1.7
mplsVpnVrfConfMidRouteThreshold Denotes mid-level water marker for the number of routes which this VRF may hold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.2.1.8
mplsVpnVrfConfHighRouteThreshold Denotes high-level water marker for the number of routes which this VRF may hold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.2.1.9
mplsVpnVrfConfMaxRoutes Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to mplsVrfMaxPossibleRoutes unless it is set to 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.2.1.10
mplsVpnVrfConfLastChanged The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in this table or addition or deletion of interfaces associated with this VRF.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.3.118.1.2.2.1.11
mplsVpnVrfConfRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.3.118.1.2.2.1.12
mplsVpnVrfConfStorageType The storage type for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.3.118.1.2.2.1.13

This table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN.

mplsVpnVrfRouteTargetEntry row .1.3.6.1.3.118.1.2.3.1

An entry in this table is created by an LSR for
each route target configured for a VRF supporting
a MPLS/BGP VPN instance. The indexing provides an
ordering per-VRF instance.

Indexes

mplsVpnVrfName mplsVpnVrfRouteTargetIndex mplsVpnVrfRouteTargetType

Column	Syntax	OID
mplsVpnVrfRouteTargetIndex Auxiliary index for route-targets configured for a particular VRF.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.3.1.2
mplsVpnVrfRouteTargetType The route target export distribution type.	Enumeration Enumerated Values: 1 import 2 export 3 both	.1.3.6.1.3.118.1.2.3.1.3
mplsVpnVrfRouteTarget The route target distribution policy.	MplsVpnRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.3.118.1.2.3.1.4
mplsVpnVrfRouteTargetDescr Description of the route target.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.3.118.1.2.3.1.5
mplsVpnVrfRouteTargetRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.3.118.1.2.3.1.6

Each entry in this table specifies a per-interface 
MPLS/EBGP neighbor.

mplsVpnVrfBgpNbrAddrEntry row .1.3.6.1.3.118.1.2.4.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. The
indexing provides an ordering of VRFs per-VPN
interface.

Indexes

mplsVpnVrfName mplsVpnInterfaceConfIndex mplsVpnVrfBgpNbrIndex

Column	Syntax	OID
mplsVpnVrfBgpNbrIndex This is a unique tertiary index for an entry in the MplsVpnVrfBgpNbrAddrEntry Table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.4.1.1
mplsVpnVrfBgpNbrRole Denotes the role played by this EBGP neighbor with respect to this VRF.	Enumerationr/w Enumerated Values: 1 ce 2 pe	.1.3.6.1.3.118.1.2.4.1.2
mplsVpnVrfBgpNbrType Denotes the address family of the PE address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.3.118.1.2.4.1.3
mplsVpnVrfBgpNbrAddr Denotes the EBGP neighbor address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.3.118.1.2.4.1.4
mplsVpnVrfBgpNbrRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.3.118.1.2.4.1.5
mplsVpnVrfBgpNbrStorageType The storage type for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.3.118.1.2.4.1.6

This table specifies per-VRF vpnv4 multi-protocol
prefixes supported by BGP.

mplsVpnVrfBgpNbrPrefixEntry row .1.3.6.1.3.118.1.2.5.1

An entry in this table is created by an LSR for
every BGP prefix associated with a VRF supporting a
MPLS/BGP VPN. The indexing provides an ordering of
BGP prefixes per VRF.

Indexes

mplsVpnVrfName mplsVpnVrfBgpPathAttrIpAddrPrefix mplsVpnVrfBgpPathAttrIpAddrPrefixLen mplsVpnVrfBgpPathAttrPeer

Column	Syntax	OID
mplsVpnVrfBgpPathAttrPeer The IP address of the peer where the path information was learned.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.3.118.1.2.5.1.1
mplsVpnVrfBgpPathAttrIpAddrPrefixLen Length in bits of the IP address prefix in the Network Layer Reachability Information field.	Integer32 Constraints: range: 0-32	.1.3.6.1.3.118.1.2.5.1.2
mplsVpnVrfBgpPathAttrIpAddrPrefix An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by mplsVpnVrfBgpPathAttrIpAddrPrefixLen. Any bits beyond the length spe…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.3.118.1.2.5.1.3
mplsVpnVrfBgpPathAttrOrigin The ultimate origin of the path information.	Enumeration Enumerated Values: 1 igp 2 egp 3 incomplete	.1.3.6.1.3.118.1.2.5.1.4
mplsVpnVrfBgpPathAttrASPathSegment The sequence of AS path segments. Each AS path segment is represented by a triple <type, length, value>. The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of …	OctetString Constraints: range: 2-255	.1.3.6.1.3.118.1.2.5.1.5
mplsVpnVrfBgpPathAttrNextHop The address of the border router that should be used for the destination network.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.3.118.1.2.5.1.6
mplsVpnVrfBgpPathAttrMultiExitDisc This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.3.118.1.2.5.1.7
mplsVpnVrfBgpPathAttrLocalPref The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.3.118.1.2.5.1.8
mplsVpnVrfBgpPathAttrAtomicAggregate Whether or not the local system has selected a less specific route without selecting a more specific route.	Enumeration Enumerated Values: 1 lessSpecificRrouteNotSelected 2 lessSpecificRouteSelected	.1.3.6.1.3.118.1.2.5.1.9
mplsVpnVrfBgpPathAttrAggregatorAS The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.	Integer32 Constraints: range: 0-65535	.1.3.6.1.3.118.1.2.5.1.10
mplsVpnVrfBgpPathAttrAggregatorAddr The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.3.118.1.2.5.1.11
mplsVpnVrfBgpPathAttrCalcLocalPref The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.3.118.1.2.5.1.12
mplsVpnVrfBgpPathAttrBest An indication of whether or not this route was chosen as the best BGP4 route.	Enumeration Enumerated Values: 1 false 2 true	.1.3.6.1.3.118.1.2.5.1.13
mplsVpnVrfBgpPathAttrUnknown One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.	OctetString Constraints: range: 0-255	.1.3.6.1.3.118.1.2.5.1.14

This table specifies per MPLS/BGP VPN VRF Table security
features.

mplsVpnVrfSecEntry row .1.3.6.1.3.118.1.2.6.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. Each
entry in this table is used to indicate security-related
information for each VRF entry.

Indexes

No indexes recorded

Column	Syntax	OID
mplsVpnVrfSecIllegalLabelViolations Indicates the number of illegally received labels on this VPN/VRF.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.6.1.1
mplsVpnVrfSecIllegalLabelRcvThresh The number of illegally received labels above which this notification is issued.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.2.6.1.2

This table specifies per MPLS/BGP VPN VRF Table performance
information.

mplsVpnVrfPerfEntry row .1.3.6.1.3.118.1.3.1.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN.

Indexes

No indexes recorded

Column	Syntax	OID
mplsVpnVrfPerfRoutesAdded Indicates the number of routes added to this VPN/VRF over the coarse of its lifetime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.3.1.1.1
mplsVpnVrfPerfRoutesDeleted Indicates the number of routes removed from this VPN/VRF.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.3.1.1.2
mplsVpnVrfPerfCurrNumRoutes Indicates the number of routes currently used by this VRF.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.3.1.1.3

This table specifies per-interface MPLS/BGP VPN VRF Table
routing information. Entries in this table define VRF routing
entries associated with the specified MPLS/VPN interfaces. Note
that this table contains both BGP and IGP routes, as both may
appear in the same VRF.

mplsVpnVrfRouteEntry row .1.3.6.1.3.118.1.4.1.1

An entry in this table is created by an LSR for every route
present configured (either dynamically or statically) within
the context of a specific VRF capable of supporting MPLS/BGP
VPN. The indexing provides an orderin…

Indexes

mplsVpnVrfName mplsVpnVrfRouteDest mplsVpnVrfRouteMask mplsVpnVrfRouteTos mplsVpnVrfRouteNextHop

Column	Syntax	OID
mplsVpnVrfRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected i…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.3.118.1.4.1.1.1
mplsVpnVrfRouteDestAddrType The address type of the mplsVpnVrfRouteDest entry.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.3.118.1.4.1.1.2
mplsVpnVrfRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent co…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.3.118.1.4.1.1.3
mplsVpnVrfRouteMaskAddrType The address type of mplsVpnVrfRouteMask.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.3.118.1.4.1.1.4
mplsVpnVrfRouteTos The IP TOS Field is used to specify the policy to be applied to this route. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.4.1.1.5
mplsVpnVrfRouteNextHop On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. .	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.3.118.1.4.1.1.6
mplsVpnVrfRouteNextHopAddrType The address type of the mplsVpnVrfRouteNextHopAddrType object.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.3.118.1.4.1.1.7
mplsVpnVrfRouteIfIndex The ifIndex value that identifies the local interface through which the next hop of this route should be reached.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.3.118.1.4.1.1.8
mplsVpnVrfRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for that the next hop is not the final destination. Routes which do not result in t…	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote	.1.3.6.1.3.118.1.4.1.1.9
mplsVpnVrfRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.	Enumerationr/w Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp	.1.3.6.1.3.118.1.4.1.1.10
mplsVpnVrfRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was l…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.4.1.1.11
mplsVpnVrfRouteInfo A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's mplsVpnVrfRouteProto …	ObjectIdentifierr/w	.1.3.6.1.3.118.1.4.1.1.12
mplsVpnVrfRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. When this object is unknown or not relevant its valu…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.3.118.1.4.1.1.13
mplsVpnVrfRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set t…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.118.1.4.1.1.14
mplsVpnVrfRouteMetric2 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.118.1.4.1.1.15
mplsVpnVrfRouteMetric3 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.118.1.4.1.1.16
mplsVpnVrfRouteMetric4 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.118.1.4.1.1.17
mplsVpnVrfRouteMetric5 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mplsVpnVrfRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.118.1.4.1.1.18
mplsVpnVrfRouteRowStatus Row status for this table. It is used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.3.118.1.4.1.1.19
mplsVpnVrfRouteStorageType Storage type value.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.3.118.1.4.1.1.20