ZhoneV52-MIB Table View

V5.2 Interface Group table.  
          
A V5.2 interface contains 1-16 E1 links.  The protocols 
defined in the ETSI V5.2 specification (ETS 300 347-1) 
are carried across the interface that is located between 
the AN and the LE.  The V5 interface is a logical concept.

v52InterfaceGroupEntry row .1.3.6.1.4.1.5504.4.3.2.1.1

An entry in the v52InterfaceBundleTable

Indexes

v52IgNameId

Column	Syntax	OID
v52IgNameId The Interface Group name is a system-wide unique symbolic name that is used for call routing. The maximum length for this name is 32 characters.	Zhone-TCZhoneAdminString Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.4.3.2.1.1.1
v52IgShelf The shelf where this Interface and V5.2 stack resides. Range of valid values is 1-255. Note 0 is an invalid value.	Zhone-TCZhoneShelfValue Type Constraints: range: 1..255	.1.3.6.1.4.1.5504.4.3.2.1.1.2
v52IgSlot The shelf where this Interface and V5.2 stack resides. Range of valid values is 1-17. Note 0 is an invalid value.	Zhone-TCZhoneSlotValue Type Constraints: range: 1..30	.1.3.6.1.4.1.5504.4.3.2.1.1.3
v52IgPeerShelf The shelf where this Redundancy Group's peer (or standby) resides. Peer shelf and peer slot define where this peer Interface Group and V5.2 stack resides. Range of valid values is 0-255. A peer shelf value of 0 r…	Zhone-TCZhoneShelfValueOrZero Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.4.3.2.1.1.4
v52IgPeerSlot The slot where this Interface Group's peer (or standby) resides. Peer shelf and peer slot define where this Interface Group peer and V5.2 stack resides. Range of valid values is 0-17. A peer slot value of 0 represen…	Zhone-TCZhoneSlotValueOrZero Type Constraints: range: 0..30	.1.3.6.1.4.1.5504.4.3.2.1.1.5
v52IgPeerStatus The status of the peer (or standby) Interface Group Valid peer status values are: * noStandbyConfigured * configuredAndAvailable * configuredAndUnavailable	Enumeration Enumerated Values: 1 noStandbyConfigured 2 configuredAndAvailable 3 configuredAndUnavailable	.1.3.6.1.4.1.5504.4.3.2.1.1.6
v52IgLocalInterfaceId 24-bit AN side V5.2 Interface identifier provisioned. Valid range is 0..16777215.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.5504.4.3.2.1.1.7
v52IgRemoteInterfaceId 24-bit LE side V5.2 Interface identifier provisioned. This is read only can only be updated indirectly by setting v52IgProvVariantRequest to requestFromLe. Valid range is 0..16777215.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.5504.4.3.2.1.1.8
v52IgLocalProvVariant AN side provisioning variant used to differentiate variations in configuration. This is provisioned by the user. Valid range is 0..127. Default is 0.	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.5504.4.3.2.1.1.9
v52IgRemoteProvVariant LE side provisioning variant used to differentiate variations in configuration. This is read only can only be updated indirectly by setting v52IgProvVariantRequest to requestFromLe. Valid range is 0..127…	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.5504.4.3.2.1.1.10
v52IgProvVariantRequest User requests to carry out various actions about provisioning variant. Valid values for this variable can be: * noRequest - this is the default value. Setting the variable to this value explicitly has…	Enumerationr/w Enumerated Values: 1 noRequest 2 verifyWithLe 3 requestFromLe 4 switchLeToLocal	.1.3.6.1.4.1.5504.4.3.2.1.1.11
v52IgProvVariantRequestStatus Status result for v52IgProvVariantRequest. When v52IgProvVariantRequest has a value of noRequest, the value for this variable is invalid. Valid values for this variable are: * verifyWithLeS…	Enumeration Enumerated Values: 1 verifyWithLeSucceeded 2 verifyWithLeFailed 3 requestFromLeSucceeded 4 requestFromLeFailed 5 switchToLocalSucceeded 6 switchToLocalFailed	.1.3.6.1.4.1.5504.4.3.2.1.1.12
v52IgAdminStatus Interface Admin Status. Valid values are inService, outOfService, deferredOutOfService and restart. Default value is outOfService. * 'deferredOutofService' takes the interface group out of service, but…	Enumerationr/w Enumerated Values: 1 inService 2 outOfService 3 deferredOutOfService 4 restart	.1.3.6.1.4.1.5504.4.3.2.1.1.13
v52IgOperationalStatus Interface operational status. Valid values are operable, inoperable, standby, and degradedService. Indicates whether it is fully inoperable and unable to provide service to the user, or it is fully operable and avail…	Enumeration Enumerated Values: 1 operable 2 inoperable 3 standby 4 degradedService 5 inoperableIsInProgress 6 inoperableOosInProgress	.1.3.6.1.4.1.5504.4.3.2.1.1.14
v52IgOperStatusCause Cause for Interface operational status. Valid values are other, localDisable, remoteOutOfService, and protocolFailure.	Enumeration Enumerated Values: 1 other 2 localDisable 3 remoteOutOfService 4 protocolFailure	.1.3.6.1.4.1.5504.4.3.2.1.1.15
v52IgMaxConfiguredCalls Maximum number of active calls. Maximum number of active calls is equal to the maximum number of links (up to 16) assigned to the IG times the maximum number of time slots per E1 link (31) less the to…	Unsigned32 Constraints: range: 30-480	.1.3.6.1.4.1.5504.4.3.2.1.1.16
v52IgCurrActiveCalls The number of calls currently active. Not supported.	Unsigned32 Constraints: range: 0-480	.1.3.6.1.4.1.5504.4.3.2.1.1.17
v52IgPstnLayer3StartAddress Starting PSTN layer 3 port address the analogue access is assigned to. Valid range in 0..32767. This variable can only be modified when v52IgAdminStatus is set to outOfService and there are no PSTN use…	Integer32r/w Constraints: range: 0-32767	.1.3.6.1.4.1.5504.4.3.2.1.1.18
v52IgIsdnEnvFuncStartAddress The envelope function starting address the ISDN primary rate access is assigned to. Valid range is 0..8175. This variable can only be modified when v52IgAdminStatus is set to outOfService and there ar…	Integer32r/w Constraints: range: 0-8175	.1.3.6.1.4.1.5504.4.3.2.1.1.19
v52IgStatsTimeElapsed The number of seconds that have elapsed since the beginning of the current collection period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum val…	Integer32 Constraints: range: 0-899	.1.3.6.1.4.1.5504.4.3.2.1.1.20
v52IgStatsValidIntervals The number of previous intervals for which data was collected. The value will typically be 96 unless the interface group was brought online within the last 24 hours, in which case the value will be the number of co…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.4.3.2.1.1.21
v52IgStatsInvalidIntervals The number of intervals in the range from 0 to igStatsValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in prox…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.4.3.2.1.1.22
v52IgPortAlignmentRequest Request to block or unblock all the user ports associated with the current IG by port type. This is needed to be compiliant with the V5.2 requirement for Accelerated Port Alignment. The status result of t…	Enumerationr/w Enumerated Values: 1 noRequest 2 blockAll 3 blockIsdn 4 blockPstn 5 unblockAll 6 unblockIsdn 7 unblockPstn	.1.3.6.1.4.1.5504.4.3.2.1.1.23
v52IgPortAlignmentStatus Indicate the status result for user port block/unblock request by port type. The values of this variable indicate both type of request and its success or fail status. The value is invalid when v52IgPortAl…	Enumeration Enumerated Values: 1 blockAllSucceeded 2 blockAllFailed 3 blockIsdnSucceded 4 blockIsdnFailed 5 blockPstnSucceded 6 blockPstnFailed 7 unblockAllSucceeded 8 unblockAllFailed 9 unblockIsdnSucceeded 10 unblockIsdnFailed 11 unblockPstnSucceeded 12 unblockPstnFailed	.1.3.6.1.4.1.5504.4.3.2.1.1.24
v52IgNationalPstnRegion V5.2's regional and country specific setting for the PSTN profile. This setting will dictate the regional signaling differences such as ring cadence. ETSI is the default value and the list of PSTN regions…	Enumerationr/w Enumerated Values: 1 etsi 2 germany 3 uk 4 italy 5 finland 6 austria 7 belgium 8 china 9 france 10 hong-kong 11 japan 12 korea 13 netherlands 14 new-zealand 15 singapore 16 spain 17 sweden 18 switzerland 19 mexico 20 argentina 21 peru 22 puerto-rico 23 brazil 24 malaysia 25 taiwan 26 united-arab-emirates 27 ireland 28 australia 29 estonia 30 south-africa 31 saudi-arabia	.1.3.6.1.4.1.5504.4.3.2.1.1.25
v52IgSwitchVendor The switch vendor for the Interface Group. The following switch vendors are defined: unknown, lucent, nortel, alcatel, ericsson, nokia, siemens, samsung. Please note that 'unknown(1)' is no longer a val…	Enumerationr/w Enumerated Values: 2 lucent 3 nortel 4 alcatel 5 ericsson 6 nokia 7 siemens 8 samsung	.1.3.6.1.4.1.5504.4.3.2.1.1.26
v52IgProtocolSpecification This variable specifies which variation of the v5.2 protocol is to be used by this interface group. Currently, there are two variations defined according to the ETSI specifications: * edition1 - refer…	Enumerationr/w Enumerated Values: 1 edition1 2 edition2	.1.3.6.1.4.1.5504.4.3.2.1.1.27
v52IgRowStatus Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52IgRowStatus set to'CreateAndGo', b) the following READ-CREATE object(s…	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.2.1.1.28

V5.2 Interface Group LAPV table.  
          
This table contains the configurable LAPV 
parameters for the interface group.  It augments 
the v52InterfaceGroupTable.  When an 
v52InterfaceGroupEntry is created, a corresponding 
row in the v52InterfaceGroupLapvTable will be 
created. All read-create objects must be provided 
for the SET if the DEFVAL, if one is defined, is 
to be over-ridden.

v52InterfaceGroupLapvEntry row .1.3.6.1.4.1.5504.4.3.2.2.1

An augmented entry in the v52InterfaceGroupLapvTable.
This table augments the v52InterfaceGroupTable.

Indexes

No indexes recorded

Column	Syntax	OID
v52IgLapvMaxOutstandingFrames Maximum number of outstanding information frames at layer 2 Range of valid values is 1-7. Default value is 7. Currently, the value of this variable cannot be changed and it will always …	framesInteger32r/w Constraints: range: 1-7	.1.3.6.1.4.1.5504.4.3.2.2.1.1
v52IgLapvN200 The maximum number of retransmissions for a frame allowed at layer 2, N200 shall be user selectable within the range of 1 to 10, inclusive, with a step size of 1 and a default value of 3. Currently, the…	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.5504.4.3.2.2.1.2
v52IgLapvN201 The maximum number of octets in the information field of an I frame, N201, shall be 260. (This SAP is used for operations messages.) Valid range is 0..260. Default is 260. Currently, the value of thi…	Integer32r/w Constraints: range: 0-260	.1.3.6.1.4.1.5504.4.3.2.2.1.3
v52IgLapvT200 Maximum layer 2 wait time for an acknowledgment of a transmitted frame (T200) For all SAPs, the value of T200 shall be user selectable within the range of 100 ms to 1000 ms, inclusive, the step size shall be 50 ms, a…	millisecondsInteger32r/w Constraints: range: 350-350 range: 300-300 range: 250-250 range: 200-200 range: 150-150 range: 100-100 range: 400-400 range: 900-900 range: 1000-1000 range: 950-950 range: 850-850 range: 800-800 range: 750-750 range: 700-700 range: 650-650 range: 600-600 range: 550-550 range: 500-500 range: 450-450	.1.3.6.1.4.1.5504.4.3.2.2.1.4
v52IgLapvT203 Maximum layer 2 idle time before connection verification is necessary (T203).For all SAPS, the value of T203 shall be user selectable within the range of 10 to 300 seconds, inclusive, the step size shall be 10 secon…	secondsInteger32r/w Constraints: range: 180-180 range: 270-270 range: 260-260 range: 250-250 range: 240-240 range: 230-230 range: 220-220 range: 210-210 range: 200-200 range: 190-190 range: 280-280 range: 170-170 range: 160-160 range: 150-150 range: 140-140 range: 130-130 range: 120-120 range: 110-110 range: 100-100 range: 90-90 range: 80-80 range: 300-300 range: 290-290 range: 70-70 range: 60-60 range: 50-50 range: 40-40 range: 30-30 range: 20-20 range: 10-10	.1.3.6.1.4.1.5504.4.3.2.2.1.5

Table of provisioned 2.048 Mbit/s E1 links,
          
The term link is a logical concept used to 
describe a communication channel between
two points.  in V5 there are many kinds of 
links: E1 links, data links, etc.  The
term link is used to mean E1 link.

v52LinkEntry row .1.3.6.1.4.1.5504.4.3.2.3.1

An entry in the v52LinkTable.

Indexes

v52IgNameId v52LinkDsnLgId v52LinkDs1ChannelNumber

Column	Syntax	OID
v52LinkDsnLgId The v52LinkDsnLgId object identifies the line group entry ID for the E1 line group ID. The range for v52LinkDsnLgId is 1..2147483647.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5504.4.3.2.3.1.1
v52LinkDs1ChannelNumber Identifies the DS1 for the channelized DS3 or physical T1/E1. The v52LinkDs1ChannelNumber for a card with a physical T1 or E1 is 1, otherwise it refers to the channel number of the DS3 port which contains the DS1. I…	Integer32 Constraints: range: 1-28	.1.3.6.1.4.1.5504.4.3.2.3.1.2
v52LinkId V5.2 Link identifier. Provisioned. Valid range is 0..255.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.4.3.2.3.1.3
v52LinkCheckId Valid values for this variable are activated and notActivated and the default is notActivated. Set this variable to 'activated' to request check v52LinkId with the LE side link id. When the checkId is fin…	Enumerationr/w Enumerated Values: 1 activated 2 notActivated	.1.3.6.1.4.1.5504.4.3.2.3.1.4
v52LinkCheckIdStatus Status result for v52LinkCheckId. Valid values for this variable are succeeded, failed and rejected. It is the responsibility of the system management to take the appropriate action according to the v5…	Enumeration Enumerated Values: 1 succeeded 2 failed 3 rejected	.1.3.6.1.4.1.5504.4.3.2.3.1.5
v52LinkAdminStatusobsolete Link Admin Status. Valid values are inService and outOfService. Default is outOfService. This variable is obsolete and will no longer be used.	Enumerationr/w Enumerated Values: 1 inService 2 outOfService	.1.3.6.1.4.1.5504.4.3.2.3.1.6
v52LinkBlock Link blocking procedure is asymmetrical. AN requests link block, LE decides, LE releases connection, LE re-establishes semi-perm and pre-connected connections. An E1 is added in a blocked state and mus…	Enumerationr/w Enumerated Values: 1 deferredBlocked 2 nonDeferredBlocked 3 forceBlocked 4 unblocked	.1.3.6.1.4.1.5504.4.3.2.3.1.7
v52LinkBlockStatus AdminLinkBlock operational status. Link blocking procedure is assymetrical. AN requests link block, LE decides, LE releases connection, LE re-establishes semi-perm and pre-connected connections. Valid…	Enumeration Enumerated Values: 1 unblocked 2 local 3 remote 4 both	.1.3.6.1.4.1.5504.4.3.2.3.1.8
v52LinkRowStatus Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52LinkRowStatus set to'CreateAndGo', b) all READ-CREATE object(s) …	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.2.3.1.9

Communication Channel (C-channel).  C-paths (see 
v52CPathTable) are carried over C-channels (communications
channels).  In V5, there are two types of C-channels,
logical and physical.  Information about logical and
physical C-channels is included in the provisioning
data for V5.2 interfaces.  A C-path associated with a
logical C-channel is protected.  A C-path associated with
a physical C-channel is not protected.
          
In V5.2 only, logical C-channels carry a group of one
or more C-paths, excluding the C-paths for the protection 
protocol.  A logical C-channel may consist of the C-paths
for the Control, Link Control, and BCC protocols.  Another
logical C-channel may consist of the C-path for the PSTN 
protocol.  A third logical C-channel may consist of the 
C-paths for ISDN Ds-type data and ISDN p-type data. A V5.2
interface may contain up to 44 logical C-channels and each
logical C-channel on an interface is uniquely identified 
in V5.2 with a 16-bit logical C-channel identifier.
          
The goal of the protection protocol is to protect the C-paths
for the V5 Signaling protocols (ie, BCC, Control, etc) 
as well as the C-paths for ISDN D-channel data. However,
the protection protocol is designed to protect logical 
C-channels, not C-paths.  Therefore, in order to protect
a C-path, it must be associated with a logical C-channel.
This association is made as part of the provisioning variant.
          
A physical C-channel consists of a time slot (64kbit/s) on
an E1 that carries a C-channel (C-channels are used to 
carry signaling traffic).  All physical C-channels are
restricted to timeslots 16, 15, and 31 in accordance with
the ETSI specification.  
          
If logical C-channels are in use, each logical C-channel 
is mapped to one and only one physical C-channel.  This 
restriction is mandated by the role of the protection 
protocol.  The protection protocol, which protects logical 
C-channels, can only protect a single logical C-channel 
per protection switch over.  This implies an implicit 
limitation of one logical C-channel per physical C-channel.
          
For a V5.2 interface, the physical C-channels are identified
by a logical link ID and a timeslot.  Each V5.2 interface can
support a maximum of 48 physical C-channels (timeslots 16,
15, and 31 on up to 16 E1 links; 3 * 16 = 48).
          
Physical C-channels are not available for bearer connections.
The physical C-channels are identified at provisioning 
time and when ISDN ports with D-channel signaling are 
added.

v52CChannelEntry row .1.3.6.1.4.1.5504.4.3.2.4.1

Communication Channel (C-Channel) Entry. Indexed by
v52IgNameId, v52LinkIndex and v52CChannelTimeSlotIndex.
Time slots are contained in the Link and in the event
of the link going out of service, no allocation of
fre…

Indexes

v52IgNameId v52LinkDsnLgId v52LinkDs1ChannelNumber v52CChannelTimeSlotIndex

Column	Syntax	OID
v52CChannelTimeSlotIndex Time Slot Index. A V5 interface contains 31 V5 time slots. Time slot 0 is not instantiated, as it is an intrinsic part of the 2048 kbit/s link used for framing. Valid values can only be 16, 15 and 31 acc…	Integer32 Constraints: range: 31-31 range: 15-16	.1.3.6.1.4.1.5504.4.3.2.4.1.1
v52CChannelLogicalChannelId Logical C-Channels carry a group of one or more C-Paths, excluding the C-Paths used for Protection protocol. A V5.2 interface may contain up to 44 logical C-channels and each logical C-channel on an interface is uniquel…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5504.4.3.2.4.1.2
v52CChannelProtGp C-Channel protection group. Valid values are none, group1, oneToOneGroup2, and mToNgroup2. Default value is none. oneToOneGroup2 option is currently not supported. v52CChanelProtGp can on…	Enumerationr/w Enumerated Values: 1 none 2 group1 3 oneToOneGroup2 4 mToNGroup2	.1.3.6.1.4.1.5504.4.3.2.4.1.3
v52CChannelRole C-Channel role. Valid values are: * active - the C-Channel is currently active mode. * standby - the C-Channel is currently in standby mode. * switchToStandby - This value can only be set when the C-C…	Enumerationr/w Enumerated Values: 1 active 2 standby 3 switchToStandby	.1.3.6.1.4.1.5504.4.3.2.4.1.4
v52CChannelStatus C-Channel status. Valid values are active, standby, and failed.	Enumeration Enumerated Values: 1 active 2 standby 3 failed	.1.3.6.1.4.1.5504.4.3.2.4.1.5
v52CChannelCurrentLogicalChannelId The value of this variable indicates the current logical C-Channel identifier of the physical C-Channel. This is useful when a physical C-Channel that was provisioned as an active channel fails - if the physical C-Chann…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.5504.4.3.2.4.1.6
v52CChannelRowStatus Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52CChannelRowStatus set to'CreateAndGo', b) all READ-CREATE object(s) …	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.2.4.1.7
v52CChannelStatusCause Cause for CChannelStatus. Valid values are * other, * switchOverRejected * switchOverError * switchOverResetSequenceNumberError * switchOverAborted * switchOverRejectedProvisioningError * switchOverResetS…	Enumeration Enumerated Values: 1 other 2 switchOverRejected 3 switchOverError 4 switchOverResetSequenceNumberError 5 switchOverAborted 6 switchOverRejectedProvisioningError 7 switchOverResetSequence	.1.3.6.1.4.1.5504.4.3.2.4.1.8

C-paths consist of a layer 2 data link carrying an 
associated layer 3 signaling protocol.  Layer 3 
signaling is defined by the Control, Link Control,
PSTN, BCC, and Protection protocols.  Therefore, a 
C-path can exist for the Control protocol, the Link
Control protocol, the PSTN protocol, the BCC protocol, 
and the Protection protocol.  In addition, ISDN 
D-channel data is also carried over C-paths.  Separate
C-paths exist for ISDN Ds, p, and f-type data. 
There can only be one of each control, link control, and
BCC C-Paths whereas multiple PSTN and ISDN C-Paths may
exist.
          
A group of C-Paths are associated with a C-channel.  
The C-path for protection, however, is not carried in 
a C-channel.

v52CPathEntry row .1.3.6.1.4.1.5504.4.3.2.5.1

Entry in the v52CPathTable.

Indexes

v52IgNameId v52CPathId

Column	Syntax	OID
v52CPathId 8-bit C-Path identifier. Provisioned. Valid range is 1..48.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.5504.4.3.2.5.1.1
v52CPathType C-path type can be unknown, pstn (PSTN), ctrl (Control protocol), bcc (Bearer Channel Connection protocol), lctl (Link Control protocol), and the following ISDN path types: Ds-isdn, f-isdn, and p-isdn. Default is u…	Enumerationr/w Enumerated Values: 1 unknown 2 pstn 3 ctrl 4 bcc 5 lctl 6 isdnDs 7 isdnF 8 isdnP	.1.3.6.1.4.1.5504.4.3.2.5.1.2
v52CPathLogicalChannelId C-Channel logical Channel ID assigned to this C-Path. Provisioned. Valid range is 0..65535.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5504.4.3.2.5.1.3
v52CPathRowStatus Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52CPathRowStatus set to'CreateAndGo', b) all READ-CREATE object(s) …	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.2.5.1.4
v52CPathOperStatus The operational status of this CPath. Valid values are 'up' and 'down'.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.5504.4.3.2.5.1.5
v52CPathOperStatusCause Cause for CPathOperStatus. Valid values are: * establishConfirmationReceived - the data link has been successfully established upon a local request. * establishIndicationReceived - the…	Enumeration Enumerated Values: 1 establishConfirmationReceived 2 establishIndicationReceived 3 releaseIndicationReceived	.1.3.6.1.4.1.5504.4.3.2.5.1.6

The User Port Table holds information regarding the
PSTN and ISDN user ports.  Information regarding the
provisioning and availability status of the port is
maintained.  If a user port is busy, information 
regarding the allocation status of Bearer Channels
to the user port is maintained and tracked by the
configuration.  If the port is put out of service
for maintenance, the port is marked unavailable.

v52UserPortEntry row .1.3.6.1.4.1.5504.4.3.2.6.1

User Port Entry.

Indexes

v52IgNameId v52UserPortAddress v52UserPortType

Column	Syntax	OID
v52UserPortAddress User Port Address. If UserPortType is PSTN, valid range is 0..32767. If UserPortType is ISDN, valid range is 0..8175. Maximum value is 32767. The actual address range is further limited by the following r…	Integer32 Constraints: range: 0-32767	.1.3.6.1.4.1.5504.4.3.2.6.1.1
v52UserPortType User Port type. Valid values are unknown, pstn, isdnBa, isdnPra.	Enumeration Enumerated Values: 1 unknown 2 pstn 3 isdnBa 4 isdnPra	.1.3.6.1.4.1.5504.4.3.2.6.1.2
v52UserPortAdminStatus UserPort Admin Status. Valid values are inService and outOfService. Default is outOfService.	Enumerationr/w Enumerated Values: 1 inService 2 outOfService	.1.3.6.1.4.1.5504.4.3.2.6.1.3
v52UserPortBlock The Q3 interface of the access network can request that a port be blocked for non-urgent configuration or reconfiguration. If the port is routed through a V5 interface to a local exchange, then this request can only…	Enumerationr/w Enumerated Values: 1 blocked 2 shuttingDown 3 unblocked 4 blockedNotSuitableForGroupUnblocking	.1.3.6.1.4.1.5504.4.3.2.6.1.4
v52UserPortBlockStatus UserPortBlock operational status. Valid values are: * localBlocked - local is blocked * remoteBlocked - remote is blocked * bothBlocked - both local and remote are blocked * unblocked - both local and rem…	Enumeration Enumerated Values: 1 unblocked 2 localBlocked 3 remoteBlocked 4 bothBlocked	.1.3.6.1.4.1.5504.4.3.2.6.1.5
v52UserPortRegOrLeaseUser User is a regular, permanent lease, or semi-permanent leaseuser. Valid values are regular, permanentLease, semiPermanentLease. Default is regular.	Enumerationr/w Enumerated Values: 1 regular 2 permanentLease 3 semiPermanentLease	.1.3.6.1.4.1.5504.4.3.2.6.1.6
v52UserPortIsdnDsCPathId An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry Ds-type data, the value of this variable should be configured to be the value of the v52C…	Integer32r/w Constraints: range: 0-48	.1.3.6.1.4.1.5504.4.3.2.6.1.7
v52UserPortIsdnPCPathId An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry p-type data, the value of this variable should be configured to be the value of the v52CP…	Integer32r/w Constraints: range: 0-48	.1.3.6.1.4.1.5504.4.3.2.6.1.8
v52UserPortIsdnFCPathId An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry f-type data, the value of this variable should be configured to be the value of the v52CP…	Integer32r/w Constraints: range: 0-48	.1.3.6.1.4.1.5504.4.3.2.6.1.9
v52UserPortRowStatus Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52UserPortRowStatus set to'CreateAndGo', b) the following READ-CREATE ob…	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.2.6.1.10
v52UserPortOperStatus User port operational status. Valid values are inService, manualOos and Oos. * 'inService' - the user port is ready to carry calls. * 'manualOos' - the user port has been manually put into …	Enumeration Enumerated Values: 1 inService 2 manualOos 3 oos	.1.3.6.1.4.1.5504.4.3.2.6.1.11

The V5.2 Interface Group Statistics Current Table.
          
The V5.2 Interface Group Statistics current 
table contains various statistics being collected 
for the current 15 minute interval.  
          
The maximum number of entries is identical to that
of the Interface Group Table. The interfaceGroupTable
is the base table for this augmented table.

v52StatsCurrentEntry row .1.3.6.1.4.1.5504.4.3.2.7.1

An entry in the v52StatsCurrentTable which
AUGMENTS the base table v52InterfaceGroupTable.
There is a 1-to-1 correspondence between rows
in interfaceGroupTable and rows in this table.
When a row is created in the bas…

Indexes

No indexes recorded

Column	Syntax	OID
v52IfCurrentPstnOutboundCalls The number of PSTN outbound calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.1
v52IfCurrentPstnInboundCalls The number of PSTN inbound calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.2
v52IfCurrentCallsBlocked The number of calls that were blocked due to no available time-slot.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.3
v52IfCurrentV52ProtocolErrors The number of V5.2 Protocol errors.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.4
v52IfCurrentLapdSent The number of LAPD frames sent on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.5
v52IfCurrentLapdRcvd The number LAPD frames received on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.6
v52IfCurrentLapdRcvdErrs The number LAPD frames received in error on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.7
v52IfCurrentIsdnCalls The number of ISDN calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.7.1.8

V5.2 Interface Group Statistics Interval Table. 
          
The V5.2 Interface Group Statistics Interval 
Table contains various statistics collected by 
each Interface Group over the previous 6. 12.
18, or 24 hours of operation.  The past 6, 12,
18, or 24 hours are broken into 24, 48, 72, or
96 completed 15 minute intervals.  Each row in 
this table represents one such interval 
(identified by igIntervalNumber) for one 
specific instance (identified by igIntervalIndex).

v52StatsIntervalEntry row .1.3.6.1.4.1.5504.4.3.2.8.1

An entry in the igStatsIntervalTable. Indexed by
(igNameId, igIntervalNumber).

Indexes

v52IgNameId v52IfIntervalNumber

Column	Syntax	OID
v52IfIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.5504.4.3.2.8.1.1
v52IfIntervalPstnOutboundCalls The number of PSTN outbound calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.2
v52IfIntervalPstnInboundCalls The number of PSTN inbound calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.3
v52IfIntervalCallsBlocked The number of calls that were blocked due to no available time-slot.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.4
v52IfIntervalV52ProtocolErrors The number of V5.2 Protocol errors.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.5
v52IfIntervalLapdSent The number of LAPD frames sent on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.6
v52IfIntervalLapdRcvd The number LAPD frames received on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.7
v52IfIntervalLapdRcvdErrs The number LAPD frames received in error on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.8
v52IfIntervalIsdnCalls The number of ISDN calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.8.1.9

V5.2 Interface Group Statistics Total Table. 
          
The V5.2 Interface Group Statistics Total 
Table contains the cumulative sum of the 
various statistics for the 24 hour period 
preceding the current interval.
          
The maximum number of entries is identical to that
of the Interface Group Table. The v52InterfaceGroupTable
is the base table for this augmented table.

v52StatsTotalEntry row .1.3.6.1.4.1.5504.4.3.2.9.1

An entry in the v52StatsTotalTable which
AUGMENTS the base table interfaceGroupTable.
There is a 1-to-1 correspondence between rows
in v52InterfaceGroupTable and rows in this table.
When a row is created in the base …

Indexes

No indexes recorded

Column	Syntax	OID
v52IfTotalPstnOutboundCalls The number of PSTN outbound calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.1
v52IfTotalPstnInboundCalls The number of PSTN inbound calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.2
v52IfTotalCallsBlocked The number of calls that were blocked due to no available time-slot.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.3
v52IfTotalV52ProtocolErrors The number of V5.2 Protocol errors.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.4
v52ifTotalLapdSent The number of LAPD frames sent on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.5
v52IfTotalLapdRcvd The number LAPD frames received on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.6
v52IfTotalLapdRcvdErrs The number LAPD frames received in error on all C-Paths for this interface group.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.7
v52IfTotalIsdnCalls The number of ISDN calls completed.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.4.3.2.9.1.8

This is the extension of the v52InterfaceGroupTable for
extra configuration and monitoring variables for the
V5.2 interface group.

v52IgExtensionEntry row .1.3.6.1.4.1.5504.4.3.2.11.1

An entry in the v52IgExtensionTable.

v52IgExtensionEntry is augmented to v52InterfaceGroupEntry.
Whenever a row is created or destroyed for the
v52InterfaceGroupEntry, the same row should also be
created or…

Indexes

No indexes recorded

Column	Syntax	OID
v52IgStartupCheckLinkId This variable indicates whether or not Link ID check will be performed when a V5.2 interface is starting up. The default value is 'false'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.4.3.2.11.1.1
v52IgStartupUnblockUserPorts This variable indicates whether or not user ports will be unblocked when a V5.2 interface is starting up. The default value is 'false'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.4.3.2.11.1.2
v52IgLinkOutOfServiceTimer This timer specifies the length of time a Link must be in a failed state before the interface declares the link failed. This timer value should always exceed the equivalent value on the LE. Valid range f…	milliseconds.Integer32r/w Constraints: range: 50-10000	.1.3.6.1.4.1.5504.4.3.2.11.1.3
v52IgLinkInServiceTimer This timer specifies the length of time a Link must be in a framed state before the interface declares the link in service. This timer value should always be less than the equivalent value on the LE. Val…	millisecondsInteger32r/w Constraints: range: 50-10000	.1.3.6.1.4.1.5504.4.3.2.11.1.4

This table is read-only and is derived from the protection
group provisioning information from the v52CChannelTable.
          
Unlike the C-Paths defined in v52CPathTable, C-Paths for the
protection protocol are not carried over logical C-Channels.
          
For each Interface Group, there will always be two C-Paths
for protection protcol when an active and a standby CChannel
are provisioned in protection group 1. The active and
standby C-Channels for the group 1 protection shall always
carry the two C-Paths for the protection protocol
respectively and the protection C-Paths shall not be
switched by the protection mechanism.
          
When an Interface Group has no protection group provisioned
in the v52CChannelTable, there will be no entries in this
table for this Interface Group.

v52ProtectionCPathEntry row .1.3.6.1.4.1.5504.4.3.2.12.1

An entry in the v52ProtectionCPathTable.

The maximum number of entryies for this table is two.

Indexes

v52IgNameId v52ProtectionCPathId

Column	Syntax	OID
v52ProtectionCPathId The valid value range is 1..2. v52ProtectionCPathId 1 refers to the C-Path for protection running on the provisioned active C-Channel in protection group 1. v52ProtectionCPathId 2 refers to…	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5504.4.3.2.12.1.1
v52ProtectionCPathOperStatus This variable indicates the operational status of the protection CPath. The valid values are up(1) or down(2).	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.5504.4.3.2.12.1.2
v52ProtectionCPathOperStatusCause Cause for v52ProtectionCPathOperStatus. Valid values are: * establishConfirmationReceived - the data link has been successfully established upon a local request. * establishIndicationRe…	Enumeration Enumerated Values: 1 establishConfirmationReceived 2 establishIndicationReceived 3 releaseIndicationReceived	.1.3.6.1.4.1.5504.4.3.2.12.1.3