brLimitPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.3.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk brLimitPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::brLimitPortTable'

Copy

brLimitPortEntry row .1.3.6.1.4.1.890.1.5.12.46.3.2.1

An entry in brLimitPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
brLimitPortBrState Broadcast rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.3.2.1.1
brLimitPortBrRate Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.3.2.1.2
brLimitPortMcState Multicast rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.3.2.1.3
brLimitPortMcRate AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.3.2.1.4
brLimitPortDlfState Destination lookup failure frames rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.3.2.1.5
brLimitPortDlfRate Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.3.2.1.6

portSecurityPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.4.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portSecurityPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portSecurityPortTable'

Copy

portSecurityPortEntry row .1.3.6.1.4.1.890.1.5.12.46.4.2.1

An entry in portSecurityPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portSecurityPortState Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecur…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.4.2.1.1
portSecurityPortLearnState MAC address learning enabled/disable on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.4.2.1.2
portSecurityPortCount Number of (dynamic) MAC addresses that may be learned on the port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.4.2.1.3

vlanTrunkPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.5.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanTrunkPortTable'

Copy

vlanTrunkPortEntry row .1.3.6.1.4.1.890.1.5.12.46.5.1.1

An entry in vlanTrunkPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vlanTrunkPortState VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.5.1.1.1

ctlProtTransTunnelPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.6.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ctlProtTransTunnelPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::ctlProtTransTunnelPortTable'

Copy

ctlProtTransTunnelPortEntry row .1.3.6.1.4.1.890.1.5.12.46.6.2.1

An entry in ctlProtTransTunnelPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
ctlProtTransTunnelMode Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3)	Enumerationr/w Enumerated Values: 0 peer 1 tunnel 2 discard 3 network	.1.3.6.1.4.1.890.1.5.12.46.6.2.1.1

vlanStackPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.7.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanStackPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanStackPortTable'

Copy

vlanStackPortEntry row .1.3.6.1.4.1.890.1.5.12.46.7.3.1

An entry in vlanStackPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vlanStackPortMode Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID and Priority are ignored. Set Access mode to have the swit…	Enumerationr/w Enumerated Values: 1 normal 2 access 3 tunnel	.1.3.6.1.4.1.890.1.5.12.46.7.3.1.1
vlanStackPortVid VLAN ID used in service provider tag.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.7.3.1.2
vlanStackPortPrio Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest.	Enumerationr/w Enumerated Values: 0 priority_0 1 priority_1 2 priority_2 3 priority_3 4 priority_4 5 priority_5 6 priority_6 7 priority_7	.1.3.6.1.4.1.890.1.5.12.46.7.3.1.3
vlanStackTunnelPortTpid Tunnel Port TPID in hex format, e.g. 8100.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.7.3.1.4
vlanStackPCopyCtagPrio	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.7.3.1.5

selectiveQinQTable

table

.1.3.6.1.4.1.890.1.5.12.46.7.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk selectiveQinQTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::selectiveQinQTable'

Copy

selectiveQinQEntry row .1.3.6.1.4.1.890.1.5.12.46.7.4.1

An entry in selective qinq table

Indexes

selectiveQinQPort selectiveQinQCvid

Column	Syntax	OID
selectiveQinQName The name of selective qinq entry	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.7.4.1.1
selectiveQinQPort interface port id	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.7.4.1.2
selectiveQinQCvid inner vid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.7.4.1.3
selectiveQinQSpvid outer vid	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.7.4.1.4
selectiveQinQPriority priority	Enumerationr/w Enumerated Values: 0 priority_0 1 priority_1 2 priority_2 3 priority_3 4 priority_4 5 priority_5 6 priority_6 7 priority_7	.1.3.6.1.4.1.890.1.5.12.46.7.4.1.5
selectiveQinQRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.7.4.1.6
selectiveQinQACtivePrio Use the value for priority for Stag	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.7.4.1.7

portBasedInnerQTable

table

.1.3.6.1.4.1.890.1.5.12.46.7.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedInnerQTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portBasedInnerQTable'

Copy

portBasedInnerQEntry row .1.3.6.1.4.1.890.1.5.12.46.7.5.1

An entry in PortBasedInnerQTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portBasedInnerQVid VLAN ID used in inner tag.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.7.5.1.1
portBasedInnerQPrio Priority value for inner tag. 0 is the lowest priority level and 7 is the highest.	Enumerationr/w Enumerated Values: 0 priority_0 1 priority_1 2 priority_2 3 priority_3 4 priority_4 5 priority_5 6 priority_6 7 priority_7	.1.3.6.1.4.1.890.1.5.12.46.7.5.1.2
portBasedInnerQActive	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.7.5.1.3
portBasedInnerQTxUntag Tx without Ctag (Only active when innerQ is enable)	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.7.5.1.4

portAuthTable

table

.1.3.6.1.4.1.890.1.5.12.46.8.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portAuthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portAuthTable'

Copy

portAuthEntry row .1.3.6.1.4.1.890.1.5.12.46.8.4.1

An entry in portAuthTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portAuthEntryState 802.1x port authentication enabled or disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.8.4.1.1
portReAuthEntryState 802.1x port re-authentication enabled or disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.8.4.1.2
portReAuthEntryTimer Re-authentication timer in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.8.4.1.3

fanRpmTable

table

.1.3.6.1.4.1.890.1.5.12.46.9.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fanRpmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::fanRpmTable'

Copy

fanRpmEntry row .1.3.6.1.4.1.890.1.5.12.46.9.1.1

An entry in fanRpmTable.

Indexes

fanRpmIndex

Column	Syntax	OID
fanRpmIndex Index of FAN.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.1.1.1
fanRpmCurValue Current speed in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.1.1.2
fanRpmMaxValue Maximum speed measured in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.1.1.3
fanRpmMinValue Minimum speed measured in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.1.1.4
fanRpmLowThresh The minimum speed at which a normal fan should work.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.1.1.5
fanRpmDescr 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.9.1.1.6

tempTable

table

.1.3.6.1.4.1.890.1.5.12.46.9.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tempTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::tempTable'

Copy

tempEntry row .1.3.6.1.4.1.890.1.5.12.46.9.2.1

An entry in tempTable.

Indexes

tempIndex

Column	Syntax	OID
tempIndex Index of temperature unit. 1:MAC, 2:CPU, 3:PHY	Enumeration Enumerated Values: 1 mac 2 cpu 3 phy	.1.3.6.1.4.1.890.1.5.12.46.9.2.1.1
tempCurValue The current temperature measured at this sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.2.1.2
tempMaxValue The maximum temperature measured at this sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.2.1.3
tempMinValue The minimum temperature measured at this sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.2.1.4
tempHighThresh The upper temperature limit at this sensor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.2.1.5
tempDescr 'Normal' indicates temperatures below the threshold and 'Error' for those above.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.9.2.1.6

voltageTable

table

.1.3.6.1.4.1.890.1.5.12.46.9.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voltageTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::voltageTable'

Copy

voltageEntry row .1.3.6.1.4.1.890.1.5.12.46.9.3.1

An entry in voltageTable.

Indexes

voltageIndex

Column	Syntax	OID
voltageIndex Index of voltage. (1) 14VIN (2) 2.5VS (3) CPU/DSP/AFE	Enumeration Enumerated Values: 1 vin14 2 vs2_5 3 cpu_dsp_afe	.1.3.6.1.4.1.890.1.5.12.46.9.3.1.1
voltageCurValue The current voltage reading.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.3.1.2
voltageMaxValue The maximum voltage measured at this point.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.3.1.3
voltageMinValue The minimum voltage measured at this point.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.3.1.4
voltageNominalValue The normal voltage at wchich the switch work.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.3.1.5
voltageLowThresh The minimum voltage at which the switch should work.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.9.3.1.6
voltageDescr 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.9.3.1.7

snmpTrapDestTable

table

.1.3.6.1.4.1.890.1.5.12.46.10.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::snmpTrapDestTable'

Copy

snmpTrapDestEntry row .1.3.6.1.4.1.890.1.5.12.46.10.4.1

An entry in snmpTrapDestTable.

Indexes

snmpTrapDestIP

Column	Syntax	OID
snmpTrapDestIP IP address of trap destination.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.10.4.1.1
snmpTrapDestRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.10.4.1.2
snmpTrapDestPort The UDP port of the trap destination.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.10.4.1.3
snmpTrapVersion The SNMP protocol version to send traps.	Enumerationr/w Enumerated Values: 0 v1 1 v2c 2 v3	.1.3.6.1.4.1.890.1.5.12.46.10.4.1.4
snmpTrapUserName The user name for sending SNMPv3 traps.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.10.4.1.5

snmpTrapGroupTable

table

.1.3.6.1.4.1.890.1.5.12.46.10.5 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::snmpTrapGroupTable'

Copy

snmpTrapGroupEntry row .1.3.6.1.4.1.890.1.5.12.46.10.5.1

An entry in snmpTrapGroupTable.

Indexes

snmpTrapDestIP

Column	Syntax	OID
snmpTrapSystemGroup	Bitsr/w Enumerated Values: 0 coldStart 1 warmStart 2 fanSpeed 3 temperature 4 voltage 5 reset 7 externalalarm 9 loopguard 10 lpr	.1.3.6.1.4.1.890.1.5.12.46.10.5.1.1
snmpTrapInterfaceGroup	Bitsr/w Enumerated Values: 0 linkup 1 linkdown 2 autonegotiation 4 sfp	.1.3.6.1.4.1.890.1.5.12.46.10.5.1.2
snmpTrapAAAGroup	Bitsr/w Enumerated Values: 0 authentication 1 accounting	.1.3.6.1.4.1.890.1.5.12.46.10.5.1.3
snmpTrapSwitchGroup	Bitsr/w Enumerated Values: 0 stp 1 mactable 2 rmon	.1.3.6.1.4.1.890.1.5.12.46.10.5.1.5
snmpTrapVdslGroup	Bitsr/w Enumerated Values: 0 alarmprofile 1 others	.1.3.6.1.4.1.890.1.5.12.46.10.5.1.6

snmpUserTable

table

.1.3.6.1.4.1.890.1.5.12.46.10.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::snmpUserTable'

Copy

A table that contains SNMPv3 user information.

snmpUserEntry row .1.3.6.1.4.1.890.1.5.12.46.10.7.1

An entry of snmpUserTable.

Indexes

snmpUserName

Column	Syntax	OID
snmpUserName The user name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.10.7.1.1
snmpUserSecurityLevel The level of security at which SNMP messages can be sent or with which operations are being processed.	Enumerationr/w Enumerated Values: 0 noAuthNoPriv 1 authNoPriv 2 authPriv	.1.3.6.1.4.1.890.1.5.12.46.10.7.1.2
snmpUserAuthProtocol The type of authentication protocol to be used.	Enumerationr/w Enumerated Values: 0 md5 1 sha	.1.3.6.1.4.1.890.1.5.12.46.10.7.1.3
snmpUserPrivProtocol The type of privacy protocol to be used.	Enumerationr/w Enumerated Values: 0 des 1 aes	.1.3.6.1.4.1.890.1.5.12.46.10.7.1.4

snmpTrapDestInfoTable

table

.1.3.6.1.4.1.890.1.5.12.46.10.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::snmpTrapDestInfoTable'

Copy

snmpTrapDestInfoEntry row .1.3.6.1.4.1.890.1.5.12.46.10.8.1

An entry in snmpTrapDestInfoTable.

Indexes

snmpTrapDestInfoIpAddrType snmpTrapDestInfoIpAddr

Column	Syntax	OID
snmpTrapDestInfoIpAddrType IP address of trap destination.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.10.8.1.1
snmpTrapDestInfoIpAddr IP address of trap destination.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.10.8.1.2
snmpTrapDestInfoRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.10.8.1.3
snmpTrapDestInfoPort The UDP port of the trap destination.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.10.8.1.4
snmpTrapDestInfoVersion The SNMP protocol version to send traps.	Enumerationr/w Enumerated Values: 0 v1 1 v2c 2 v3	.1.3.6.1.4.1.890.1.5.12.46.10.8.1.5
snmpTrapDestInfoUserName The user name for sending SNMPv3 traps.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.10.8.1.6

snmpTrapGroupInfoTable

table

.1.3.6.1.4.1.890.1.5.12.46.10.9 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::snmpTrapGroupInfoTable'

Copy

snmpTrapGroupInfoEntry row .1.3.6.1.4.1.890.1.5.12.46.10.9.1

An entry in snmpTrapGroupInfoTable.

Indexes

snmpTrapDestInfoIpAddrType snmpTrapDestInfoIpAddr

Column	Syntax	OID
snmpTrapGroupInfoSystemGroup	Bitsr/w Enumerated Values: 0 coldStart 1 warmStart 2 fanSpeed 3 temperature 4 voltage 5 reset 7 externalalarm 9 loopguard 10 lpr	.1.3.6.1.4.1.890.1.5.12.46.10.9.1.1
snmpTrapGroupInfoInterfaceGroup	Bitsr/w Enumerated Values: 0 linkup 1 linkdown 2 autonegotiation 4 sfp	.1.3.6.1.4.1.890.1.5.12.46.10.9.1.2
snmpTrapGroupInfoAAAGroup	Bitsr/w Enumerated Values: 0 authentication 1 accounting	.1.3.6.1.4.1.890.1.5.12.46.10.9.1.3
snmpTrapGroupInfoSwitchGroup	Bitsr/w Enumerated Values: 0 stp 1 mactable 2 rmon	.1.3.6.1.4.1.890.1.5.12.46.10.9.1.5
snmpTrapGroupInfoVdslGroup	Bitsr/w Enumerated Values: 0 alarmprofile 1 others	.1.3.6.1.4.1.890.1.5.12.46.10.9.1.6

rmtFwUpgradeStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.12.11.3.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rmtFwUpgradeStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::rmtFwUpgradeStatusTable'

Copy

rmtFwUpgradeStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.12.11.3.1.1

An entry in rmtFwUpgradeStatusTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
rmtFwUpgradeStatus	Enumeration Enumerated Values: 1 idle 2 upgrading 3 success 4 fail	.1.3.6.1.4.1.890.1.5.12.46.12.11.3.1.1.1

rmtFwStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.12.11.4.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rmtFwStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::rmtFwStatusTable'

Copy

rmtFwStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.12.11.4.3.1

An entry in rmtFwStatusTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
rmtFwStatus	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.12.11.4.3.1.1

sysLoginSetupTable

table

.1.3.6.1.4.1.890.1.5.12.46.12.14.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLoginSetupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::sysLoginSetupTable'

Copy

sysLoginSetupEntry row .1.3.6.1.4.1.890.1.5.12.46.12.14.2.1

An entry in LoginLimitMaxNumberOfUser.

Indexes

sysLoginName

Column	Syntax	OID
sysLoginName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.1
sysLoginPassword	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.2
sysLoginPrivilege	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.3
sysLoginRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.4

igmpsnpVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.13.14 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpsnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::igmpsnpVlanTable'

Copy

igmpsnpVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.13.14.1

An entry in IgmpsnpVlanTable.

Indexes

igmpsnpVid

Column	Syntax	OID
igmpsnpVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.13.14.1.1
igmpsnpVlanName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.13.14.1.2
igmpsnpVlanRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.13.14.1.3

inbandIpTable

table

.1.3.6.1.4.1.890.1.5.12.46.14.6 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::inbandIpTable'

Copy

inbandIpEntry row .1.3.6.1.4.1.890.1.5.12.46.14.6.1

An entry in inbandIpTable.

Indexes

inbandEntryIp inbandEntryVid

Column	Syntax	OID
inbandEntryIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.14.6.1.1
inbandEntrySubnetMask	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.14.6.1.2
inbandEntryGateway	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.14.6.1.3
inbandEntryVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.14.6.1.4
inbandEntryManageable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.14.6.1.5
inbandEntryRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.14.6.1.6

filterTable

table

.1.3.6.1.4.1.890.1.5.12.46.15.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk filterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::filterTable'

Copy

filterEntry row .1.3.6.1.4.1.890.1.5.12.46.15.1.1

An entry in filterTable.

Indexes

filterMacAddr filterVid

Column	Syntax	OID
filterName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.15.1.1.1
filterActionState	Enumerationr/w Enumerated Values: 1 discard_source 2 discard_destination 3 both	.1.3.6.1.4.1.890.1.5.12.46.15.1.1.2
filterMacAddr	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.15.1.1.3
filterVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.15.1.1.4
filterRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.15.1.1.5

mirrorTable

table

.1.3.6.1.4.1.890.1.5.12.46.16.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mirrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mirrorTable'

Copy

mirrorEntry row .1.3.6.1.4.1.890.1.5.12.46.16.3.1

An entry in mirrorTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mirrorMirroredState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.16.3.1.1
mirrorDirection	Enumerationr/w Enumerated Values: 0 ingress 1 egress 2 both	.1.3.6.1.4.1.890.1.5.12.46.16.3.1.2

aggrGroupTable

table

.1.3.6.1.4.1.890.1.5.12.46.17.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::aggrGroupTable'

Copy

aggrGroupEntry row .1.3.6.1.4.1.890.1.5.12.46.17.3.1

An entry in aggrGroupTable.

Indexes

aggrGroupIndex

Column	Syntax	OID
aggrGroupIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.17.3.1.1
aggrGroupState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.17.3.1.2
aggrGroupDynamicState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.17.3.1.3

aggrPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.17.4 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::aggrPortTable'

Copy

aggrPortEntry row .1.3.6.1.4.1.890.1.5.12.46.17.4.1

An entry in aggrPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
aggrPortGroup	Enumerationr/w Enumerated Values: 0 none 1 t1	.1.3.6.1.4.1.890.1.5.12.46.17.4.1.1
aggrPortDynamicStateTimeout	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.17.4.1.2

accessCtlTable

table

.1.3.6.1.4.1.890.1.5.12.46.18.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accessCtlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::accessCtlTable'

Copy

accessCtlEntry row .1.3.6.1.4.1.890.1.5.12.46.18.1.1

An entry in accessCtlTable.

Indexes

accessCtlService

Column	Syntax	OID
accessCtlService	Enumeration Enumerated Values: 1 telnet 2 ssh 3 ftp 4 http 5 https 6 icmp 7 snmp	.1.3.6.1.4.1.890.1.5.12.46.18.1.1.1
accessCtlEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.18.1.1.2
accessCtlServicePort	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.18.1.1.3
accessCtlTimeout	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.18.1.1.4

securedClientTable

table

.1.3.6.1.4.1.890.1.5.12.46.18.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::securedClientTable'

Copy

securedClientEntry row .1.3.6.1.4.1.890.1.5.12.46.18.2.1

An entry in securedClientTable.

Indexes

securedClientIndex

Column	Syntax	OID
securedClientIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.1
securedClientEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.2
securedClientStartIp IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.3
securedClientEndIp IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.4
securedClientService	Bitsr/w Enumerated Values: 0 telnet 1 ftp 2 http 3 icmp 4 snmp 5 ssh 6 https	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.5
securedClientIpAddrType	INET-ADDRESS-MIBInetAddressTyper/w Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.6
securedClientStartIpAddr	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.7
securedClientEndIpAddr	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.18.2.1.8

portQueuingMethodTable

table

.1.3.6.1.4.1.890.1.5.12.46.19.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portQueuingMethodTable'

Copy

portQueuingMethodEntry row .1.3.6.1.4.1.890.1.5.12.46.19.2.1

An entry in portQueuingMethodTable.

Indexes

BRIDGE-MIBdot1dBasePort portQueuingMethodQueue

Column	Syntax	OID
portQueuingMethodQueue 0...7	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.19.2.1.1
portQueuingMethodWeight 0...15	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.19.2.1.2

portQueuingMethodGeSpqTable

table

.1.3.6.1.4.1.890.1.5.12.46.19.4 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodGeSpqTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portQueuingMethodGeSpqTable'

Copy

portQueuingMethodGeSpqEntry row .1.3.6.1.4.1.890.1.5.12.46.19.4.1

An entry in portQueuingMethodGeSpqTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portQueuingMethodGeSpq GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.	Enumerationr/w Enumerated Values: 0 none 1 q0 2 q1 3 q2 4 q3 5 q4 6 q5 7 q6 8 q7	.1.3.6.1.4.1.890.1.5.12.46.19.4.1.1

globalDhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.12.46.20.1.6 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk globalDhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::globalDhcpRelayRemoteServerTable'

Copy

globalDhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.12.46.20.1.6.1

An entry in globalDhcpRelayRemoteServerTable.

Indexes

globalDhcpRelayRemoteServerIp

Column	Syntax	OID
globalDhcpRelayRemoteServerIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.20.1.6.1.1
globalDhcpRelayRemoteServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.20.1.6.1.2

dhcpRelayTable

table

.1.3.6.1.4.1.890.1.5.12.46.20.3.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::dhcpRelayTable'

Copy

dhcpRelayEntry row .1.3.6.1.4.1.890.1.5.12.46.20.3.3.1

An entry in dhcpRelayTable.

Indexes

dhcpRelayVid

Column	Syntax	OID
dhcpRelayOption82Enable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.1
dhcpRelayInfoData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.3
dhcpRelayRemoteIDEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.4
dhcpRelayRemoteIDData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.5
dhcpRelayInfoType	Enumerationr/w Enumerated Values: 1 system 2 hostname	.1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.6
dhcpRelayRemoteIDType	Enumerationr/w Enumerated Values: 1 system 2 portname	.1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.7

dhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.12.46.20.3.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::dhcpRelayRemoteServerTable'

Copy

dhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.12.46.20.3.4.1

An entry in dhcpRelayRemoteServerTable.

Indexes

dhcpRelayVid dhcpRelayRemoteServerIp

Column	Syntax	OID
dhcpRelayVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.20.3.4.1.1
dhcpRelayRemoteServerIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.20.3.4.1.2
dhcpRelayRemoteServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.20.3.4.1.3

staticRouteTable

table

.1.3.6.1.4.1.890.1.5.12.46.21.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk staticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::staticRouteTable'

Copy

staticRouteEntry row .1.3.6.1.4.1.890.1.5.12.46.21.2.1

An entry in staticRouteTable.

Indexes

staticRouteIp staticRouteMask

Column	Syntax	OID
staticRouteName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.21.2.1.1
staticRouteIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.21.2.1.2
staticRouteMask	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.21.2.1.3
staticRouteGateway	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.21.2.1.4
staticRouteMetric	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.21.2.1.5
staticRouteRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.21.2.1.6

arpTable

table

.1.3.6.1.4.1.890.1.5.12.46.22.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::arpTable'

Copy

arpEntry row .1.3.6.1.4.1.890.1.5.12.46.22.1.1

An entry in arpTable.

Indexes

arpIpAddr arpMacVid

Column	Syntax	OID
arpIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.22.1.1.1
arpIpAddr	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.22.1.1.2
arpMacAddr	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.22.1.1.3
arpMacVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.22.1.1.4
arpType 1-static, 2-dynamic	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.890.1.5.12.46.22.1.1.5

portOpModePortTable

table

.1.3.6.1.4.1.890.1.5.12.46.24.1 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portOpModePortTable'

Copy

portOpModePortEntry row .1.3.6.1.4.1.890.1.5.12.46.24.1.1

An entry in portOpModePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portOpModePortSpeedDuplex	Enumerationr/w Enumerated Values: 0 auto 1 speed_10_half 2 speed_10_full 3 speed_100_half 4 speed_100_full 5 speed_1000_full	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.1
portOpModePortFlowCntl	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.2
portOpModePortName	OctetStringr/w Constraints: range: 0-9	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.3
portOpModePortModuleType	Enumeration Enumerated Values: 0 fast_ethernet_10_100 1 gigabit_ethernet_100_1000	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.4
portOpModePortLinkUpType	Enumeration Enumerated Values: 0 down 1 copper 2 fiber	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.5
portOpModePortIntrusionLock	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.6
portOpModePortLBTestSetup This entry display latest loopback test status of port while performing loopback test.	Enumerationr/w Enumerated Values: 1 internal_loopback_test 2 external_loopback_test 3 vtur_to_vtuo_loopback	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.7
portOpModePortLBTestStatus This entry display latest loopback test status of port while performing loopback test.	Enumeration Enumerated Values: 0 none 1 under_testing 2 success 3 fail	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.8
portOpModePortSwCounterReset This entry resets port SW counter.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.9
portOpModePortVdslCounterReset This entry resets port VDSL counter.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.10
portOpModePortVdslStatus This entry reports VDSL link current status.	Enumeration Enumerated Values: 1 idle 2 standby 3 showtime	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.11
portOpModePortVdslUptime This entry reports VDSL link current link up time.	OctetString	.1.3.6.1.4.1.890.1.5.12.46.24.1.1.12

portOpModePortLBTable

table

.1.3.6.1.4.1.890.1.5.12.46.24.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortLBTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portOpModePortLBTable'

Copy

portOpModePortLBEntry row .1.3.6.1.4.1.890.1.5.12.46.24.2.1

An entry in portOpModePortLBTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portOpModePortLBActive	Enumerationr/w Enumerated Values: 1 active	.1.3.6.1.4.1.890.1.5.12.46.24.2.1.1
portOpModePortLBNumber	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.24.2.1.2
portOpModePortLBCount	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.24.2.1.3
portOpModePortLBPktSize Packet size range from 64 bytes to 1518 bytes	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.24.2.1.4

portOpModePortLBResultTable

table

.1.3.6.1.4.1.890.1.5.12.46.24.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortLBResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portOpModePortLBResultTable'

Copy

portOpModePortLBResultEntry row .1.3.6.1.4.1.890.1.5.12.46.24.3.1

An entry in portOpModePortLBResultTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portOpModePortLBMaxRTT	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.24.3.1.1
portOpModePortLBMinRTT	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.24.3.1.2
portOpModePortLBAvgRTT	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.24.3.1.3
portOpModePortLBPktLossRate Loopback Packet loss rate	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.24.3.1.4
portOpModePortLBStatus	Enumeration Enumerated Values: 0 idle 1 in_progress 2 complete	.1.3.6.1.4.1.890.1.5.12.46.24.3.1.5

portBasedVlanPortListTable

table

.1.3.6.1.4.1.890.1.5.12.46.25.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedVlanPortListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portBasedVlanPortListTable'

Copy

portBasedVlanPortListEntry row .1.3.6.1.4.1.890.1.5.12.46.25.1.1

An entry in portBasedVlanPortListTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portBasedVlanPortListMembers	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.12.46.25.1.1.1

eventTable

table

.1.3.6.1.4.1.890.1.5.12.46.26.1.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk eventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::eventTable'

Copy

A list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table.

eventEntry row .1.3.6.1.4.1.890.1.5.12.46.26.1.1.1

An entry containing information about an
event in the event table.

Indexes

eventSeqNum

Column	Syntax	OID
eventSeqNum This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is increment…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.1
eventEventId This variable represents the event ID which uniquely identifies the event in the entire system.	EventIdNumber Description: This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber.	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.2
eventName This variable represents the name of the event, for example 'Ethernet Link Down'	RFC1213-MIBDisplayString Constraints: range: 0-40	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.3
eventInstanceType This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For mo…	InstanceType Type Values: 1 unknown 2 node 3 shelf 4 line 5 switch 6 lsp 7 l2Interface 8 l3Interface 9 rowIndex Description: This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified belo…	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.4
eventInstanceId This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more det…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.5
eventInstanceName This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceT…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.6
eventSeverity This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to …	EventSeverity Type Values: 1 critical 2 major 3 minor 4 informational Description: This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention.	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.7
eventSetTime This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.	UtcTimeStamp Description: Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM.	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.8
eventDescription This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefu…	RFC1213-MIBDisplayString Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.9
eventServAffective This variable indicates whether the event is service affective or not	EventServiceAffective Type Values: 1 noServiceAffected 2 serviceAffected Description: This textual convention indicates whether an event is immediately service affecting or not.	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.10
eventInstanceIdNumber This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.11

multicastPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.28.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::multicastPortTable'

Copy

multicastPortEntry row .1.3.6.1.4.1.890.1.5.12.46.28.1.1

An entry in multicastPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
multicastPortImmediateLeave	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.28.1.1.1
multicastPortMaxGroupLimited	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.28.1.1.2
multicastPortMaxOfGroup 0..255	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.28.1.1.3
multicastPortIgmpFilteringProfile	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.28.1.1.4
multicastPortQueryMode Specify query mode for each port	Enumerationr/w Enumerated Values: 1 auto_mode 2 fix_mode 3 edge_mode	.1.3.6.1.4.1.890.1.5.12.46.28.1.1.5
igmpMsgMaxLimited	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.28.1.1.6
igmpMsgLimit 0..255	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.28.1.1.7

multicastStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::multicastStatusTable'

Copy

multicastStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.29.1.1

An entry in multicastStatusTable.

Indexes

multicastStatusVlanID multicastStatusPort multicastStatusGroup

Column	Syntax	OID
multicastStatusIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.1.1.1
multicastStatusVlanID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.1.1.2
multicastStatusPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.1.1.3
multicastStatusGroup	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.29.1.1.4
multicastStatusJoinCounter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.1.1.5
multicastStatusLeaveCounter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.1.1.6

igmpCountTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::igmpCountTable'

Copy

A count table of igmp query/report/leave message.

igmpCountEntry row .1.3.6.1.4.1.890.1.5.12.46.29.2.1

An entry in igmpCountTable.

Indexes

igmpCountIndex

Column	Syntax	OID
igmpCountIndex Index of IgmpCountEntry. 0 means total count in whole system	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.1
igmpCountInQuery	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.2
igmpCountInReport	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.3
igmpCountInLeave	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.4
igmpCountInQueryDrop	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.5
igmpCountInReportDrop	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.6
igmpCountInLeaveDrop	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.7
igmpCountOutQuery	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.8
igmpCountOutReport	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.9
igmpCountOutLeave	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.2.1.10

multicastVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::multicastVlanStatusTable'

Copy

multicastVlanStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.29.3.1

An entry in multicastVlanStatusTable.

Indexes

multicastVlanStatusVlanID

Column	Syntax	OID
multicastVlanStatusVlanID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.3.1.1
multicastVlanStatusType	Enumeration Enumerated Values: 1 dynamic 2 mvr 3 static	.1.3.6.1.4.1.890.1.5.12.46.29.3.1.2
multicastVlanQueryPort	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.29.3.1.3
multicastVlanQuerySrcIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.29.3.1.4

igmpCounterPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.4 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCounterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::igmpCounterPortTable'

Copy

igmpCounterPortEntry row .1.3.6.1.4.1.890.1.5.12.46.29.4.1

An entry in igmpCounterPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
igmpCounterPortJoin Join counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.4.1.1
igmpCounterPortLeave Leave counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.4.1.2
igmpCounterPortActiveGroup Current active group for the port	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.4.1.3
igmpCounterPortQuery Query counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.4.1.4

igmpCounterVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCounterVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::igmpCounterVlanTable'

Copy

igmpCounterVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.29.5.1

An entry in igmpCounterVlanTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
igmpCounterVlanJoin Join counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.5.1.1
igmpCounterVlanLeave Leave counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.5.1.2
igmpCounterVlanActiveGroup Current active group for the Vlan	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.5.1.3
igmpCounterVlanQuery Query counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.5.1.4

multicastCurrentGroupStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.6 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastCurrentGroupStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::multicastCurrentGroupStatusTable'

Copy

multicastCurrentGroupStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.29.6.1

An entry in multicastCurrentGroupStatusTable.

Indexes

multicastStatusVlanID multicastStatusGroup

Column	Syntax	OID
multicastCurrentNumberOfActivePort Current number Of active port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.6.1.1

multicastClientSrcIpTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.7 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastClientSrcIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::multicastClientSrcIpTable'

Copy

multicastClientSrcIpEntry row .1.3.6.1.4.1.890.1.5.12.46.29.7.1

An entry in multicastClientSrcIpTable.

Indexes

multicastStatusVlanID multicastStatusPort multicastStatusGroup multicastClientSrcIpIndex

Column	Syntax	OID
multicastClientSrcIpIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.7.1.1
multicastClientSrcIpAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.29.7.1.2

mgmdStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdStatusTable'

Copy

mgmdStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.29.8.1

An entry in mgmdStatusTable.

Indexes

mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddressType mgmdStatusGroupAddress

Column	Syntax	OID
mgmdStatusIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.8.1.1
mgmdStatusVlanID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.8.1.2
mgmdStatusPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.8.1.3
mgmdStatusGroupAddressType The address type of the mgmdStatusGroupAddress entry.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.29.8.1.4
mgmdStatusGroupAddress	INET-ADDRESS-MIBInetAddress Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.890.1.5.12.46.29.8.1.5
mgmdStatusGroupFilterMode The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.890.1.5.12.46.29.8.1.6

mgmdCountTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.9 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdCountTable'

Copy

A count table of igmp/MLD query/report/leave message.

mgmdCountEntry row .1.3.6.1.4.1.890.1.5.12.46.29.9.1

An entry in mgmdCountTable.

Indexes

mgmdCountIndex

Column	Syntax	OID
mgmdCountIndex Index of mgmdCountEntry. 0 means total count in whole system	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.1
mgmdCountInQuery	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.2
mgmdCountInReport	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.3
mgmdCountInLeave	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.4
mgmdCountInQueryDrop	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.5
mgmdCountInReportDrop	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.6
mgmdCountInLeaveDrop	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.7
mgmdCountOutQuery	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.8
mgmdCountOutReport	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.9
mgmdCountOutLeave	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.9.1.10

mgmdVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.10 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdVlanStatusTable'

Copy

mgmdVlanStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.29.10.1

An entry in mgmdVlanStatusTable.

Indexes

mgmdVlanStatusVlanID

Column	Syntax	OID
mgmdVlanStatusVlanID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.10.1.1
mgmdVlanStatusType	Enumeration Enumerated Values: 1 dynamic 2 mvr 3 static	.1.3.6.1.4.1.890.1.5.12.46.29.10.1.2
mgmdVlanQueryPort	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.29.10.1.3
mgmdVlanQuerySrcIpType The address type of the mgmdVlanQuerySrcIp entry.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.29.10.1.4
mgmdVlanQuerySrcIp	INET-ADDRESS-MIBInetAddress Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.890.1.5.12.46.29.10.1.5

mgmdCounterPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.11 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCounterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdCounterPortTable'

Copy

mgmdCounterPortEntry row .1.3.6.1.4.1.890.1.5.12.46.29.11.1

An entry in mgmdCounterPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mgmdCounterPortReport Report counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.11.1.1
mgmdCounterPortLeave Leave counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.11.1.2
mgmdCounterPortActiveGroup Current active group for the port	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.11.1.3
mgmdCounterPortQuery Query counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.11.1.4
mgmdCounterPortReportDrop Report drop counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.11.1.5
mgmdCounterPortQueryDrop Query drop counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.11.1.6

mgmdCounterVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.12 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCounterVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdCounterVlanTable'

Copy

mgmdCounterVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.29.12.1

An entry in mgmdCounterVlanTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
mgmdCounterVlanReport Report counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.12.1.1
mgmdCounterVlanLeave Leave counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.12.1.2
mgmdCounterVlanActiveGroup Current active group for the Vlan	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.12.1.3
mgmdCounterVlanQuery Query counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.12.1.4
mgmdCounterVlanReportDrop Report drop counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.12.1.5
mgmdCounterVlanQueryDrop Query Drop counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.29.12.1.6

mgmdCurrentGroupStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.13 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCurrentGroupStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdCurrentGroupStatusTable'

Copy

mgmdCurrentGroupStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.29.13.1

An entry in mgmdCurrentGroupStatusTable.

Indexes

mgmdStatusVlanID mgmdStatusGroupAddressType mgmdStatusGroupAddress

Column	Syntax	OID
mgmdCurrentNumberOfActivePort Current number Of active port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.13.1.1

mgmdClientSrcIpTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.14 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdClientSrcIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdClientSrcIpTable'

Copy

mgmdClientSrcIpEntry row .1.3.6.1.4.1.890.1.5.12.46.29.14.1

An entry in mgmdClientSrcIpTable.

Indexes

mgmdClientSrcIpAddressType mgmdClientSrcIpIndex mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddress

Column	Syntax	OID
mgmdClientSrcIpIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.29.14.1.1
mgmdClientSrcIpAddressType	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.29.14.1.2
mgmdClientSrcIpAddress	INET-ADDRESS-MIBInetAddress Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.890.1.5.12.46.29.14.1.3

mgmdSrcListTable

table

.1.3.6.1.4.1.890.1.5.12.46.29.15 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdSrcListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdSrcListTable'

Copy

The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair
on a host.

mgmdSrcListEntry row .1.3.6.1.4.1.890.1.5.12.46.29.15.1

An entry (conceptual row) in the mgmdSrcListTable.

Indexes

mgmdSrcListAddressType mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddress mgmdSrcListAddress

Column	Syntax	OID
mgmdSrcListAddressType The address type of the InetAddress variables in this table. This value applies to the mgmdStatusGroupAddress and mgmdSrcListAddress entries.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.29.15.1.1
mgmdSrcListAddress The IP multicast group address for which this entry contains information.	INET-ADDRESS-MIBInetAddress Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.890.1.5.12.46.29.15.1.2

igmpFilteringProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.30.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpFilteringProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::igmpFilteringProfileTable'

Copy

igmpFilteringProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.30.2.1

An entry in igmpFilteringProfileTable.

Indexes

igmpFilteringProfileName igmpFilteringProfileStartAddress igmpFilteringProfileEndAddress

Column	Syntax	OID
igmpFilteringProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.30.2.1.1
igmpFilteringProfileStartAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.30.2.1.2
igmpFilteringProfileEndAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.30.2.1.3
igmpFilteringProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.30.2.1.4

mgmdFilterProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.30.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdFilterProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mgmdFilterProfileTable'

Copy

mgmdFilterProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.30.3.1

An entry in mgmdFilterProfileTable.For v4 and v6 address

Indexes

mgmdFilterProfileName mgmdFilterProfileAddressType mgmdFilterProfileStartAddress mgmdFilterProfileEndAddress

Column	Syntax	OID
mgmdFilterProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.30.3.1.1
mgmdFilterProfileAddressType The type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined in the InetAddress MIB.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.12.46.30.3.1.2
mgmdFilterProfileStartAddress The Start IP address of this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.30.3.1.3
mgmdFilterProfileEndAddress The End IP address of this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.30.3.1.4
mgmdFilterProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.30.3.1.5

mvrTable

table

.1.3.6.1.4.1.890.1.5.12.46.31.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mvrTable'

Copy

mvrEntry row .1.3.6.1.4.1.890.1.5.12.46.31.2.1

An entry in mvrTable.

Indexes

mvrVlanID

Column	Syntax	OID
mvrVlanID 1..4094	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.31.2.1.1
mvrName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.31.2.1.2
mvrMode	Enumerationr/w Enumerated Values: 0 dynamic 1 compatible	.1.3.6.1.4.1.890.1.5.12.46.31.2.1.3
mvrRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.31.2.1.4
mvr8021pPriority Set the 802.1p priority of control messages within MVR (0~7)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.31.2.1.5

mvrPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.31.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mvrPortTable'

Copy

mvrPortEntry row .1.3.6.1.4.1.890.1.5.12.46.31.3.1

An entry in mvrPortTable.

Indexes

mvrVlanID BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mvrPortRole	Enumerationr/w Enumerated Values: 1 none 2 source_port 3 receiver_port	.1.3.6.1.4.1.890.1.5.12.46.31.3.1.1
mvrPortTagging	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.31.3.1.2

mvrGroupTable

table

.1.3.6.1.4.1.890.1.5.12.46.31.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mvrGroupTable'

Copy

mvrGroupEntry row .1.3.6.1.4.1.890.1.5.12.46.31.5.1

An entry in mvrGroupTable.

Indexes

mvrVlanID mvrGroupName

Column	Syntax	OID
mvrGroupName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.31.5.1.1
mvrGroupStartAddress	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.31.5.1.2
mvrGroupEndAddress	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.31.5.1.3
mvrGroupRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.31.5.1.4

mvrMgmdGroupTable

table

.1.3.6.1.4.1.890.1.5.12.46.31.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrMgmdGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mvrMgmdGroupTable'

Copy

mvrMgmdGroupEntry row .1.3.6.1.4.1.890.1.5.12.46.31.7.1

An entry in mvrMgmdGroupTable.

Indexes

mvrVlanID mvrMgmdGroupName

Column	Syntax	OID
mvrMgmdGroupName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.31.7.1.1
mvrMgmdGroupAddressType	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.12.46.31.7.1.2
mvrMgmdGroupStartAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.31.7.1.3
mvrMgmdGroupEndAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.31.7.1.4
mvrMgmdGroupRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.31.7.1.5

sysLogTypeTable

table

.1.3.6.1.4.1.890.1.5.12.46.33.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::sysLogTypeTable'

Copy

sysLogTypeEntry row .1.3.6.1.4.1.890.1.5.12.46.33.2.1

An entry in sysLogTypeTable.

Indexes

sysLogTypeIndex

Column	Syntax	OID
sysLogTypeIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.33.2.1.1
sysLogTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.33.2.1.2
sysLogTypeState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.33.2.1.3
sysLogTypeFacility	Enumerationr/w Enumerated Values: 0 local_user0 1 local_user1 2 local_user2 3 local_user3 4 local_user4 5 local_user5 6 local_user6 7 local_user7	.1.3.6.1.4.1.890.1.5.12.46.33.2.1.4

sysLogServerTable

table

.1.3.6.1.4.1.890.1.5.12.46.33.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::sysLogServerTable'

Copy

sysLogServerEntry row .1.3.6.1.4.1.890.1.5.12.46.33.3.1

An entry in sysLogServerTable.

Indexes

sysLogServerAddress

Column	Syntax	OID
sysLogServerAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.33.3.1.1
sysLogServerLogLevel	Enumerationr/w Enumerated Values: 0 level0 1 level0_1 2 level0_2 3 level0_3 4 level0_4 5 level0_5 6 level0_6 7 level0_7	.1.3.6.1.4.1.890.1.5.12.46.33.3.1.2
sysLogServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.33.3.1.3

sysLogServerInfoTable

table

.1.3.6.1.4.1.890.1.5.12.46.33.4 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::sysLogServerInfoTable'

Copy

sysLogServerInfoEntry row .1.3.6.1.4.1.890.1.5.12.46.33.4.1

An entry in sysLogServerInfoTable.

Indexes

sysLogServerInfoIpAddrType sysLogServerInfoIpAddr

Column	Syntax	OID
sysLogServerInfoIpAddrType	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.33.4.1.1
sysLogServerInfoIpAddr	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.33.4.1.2
sysLogServerInfoLogLevel	Enumerationr/w Enumerated Values: 0 level0 1 level0_1 2 level0_2 3 level0_3 4 level0_4 5 level0_5 6 level0_6 7 level0_7	.1.3.6.1.4.1.890.1.5.12.46.33.4.1.3
sysLogServerInfoRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.33.4.1.4

diffservMapTable

table

.1.3.6.1.4.1.890.1.5.12.46.34.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::diffservMapTable'

Copy

diffservMapEntry row .1.3.6.1.4.1.890.1.5.12.46.34.2.1

An entry in diffservMapTable.

Indexes

diffservMapDscp

Column	Syntax	OID
diffservMapDscp 0-63	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.34.2.1.1
diffservMapPriority 0-7	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.34.2.1.2

diffservPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.34.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::diffservPortTable'

Copy

diffservPortEntry row .1.3.6.1.4.1.890.1.5.12.46.34.3.1

An entry in diffservPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
diffservPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.34.3.1.1

layer2Table

table

.1.3.6.1.4.1.890.1.5.12.46.35.1.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk layer2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::layer2Table'

Copy

layer2Entry row .1.3.6.1.4.1.890.1.5.12.46.35.1.1.1

An entry in layer2Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturIgmpSnoopingStateSetup	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.35.1.1.1.2

portTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.2.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portTable'

Copy

portEntry row .1.3.6.1.4.1.890.1.5.12.46.35.2.1.1

An entry in portTable.

Indexes

BRIDGE-MIBdot1dBasePort portNumber

Column	Syntax	OID
portNumber Display all ports we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.1
portAdminStatus Specify CPE port's admin status.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.2
portOperStatus CPE port's current status.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.3
portSpeedDuplex Specify each port's speed and duplex in CPE side.	Enumerationr/w Enumerated Values: 1 autoneg 2 half_10M 3 full_10M 4 half_100M 5 full_100M	.1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.4
portOperSpeed CPE port's current speed.	Enumeration Enumerated Values: 0 linkdown 1 autoneg 2 half_10M 3 full_10M 4 half_100M 5 full_100M	.1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.8

vturWanTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturWanTable'

Copy

vturWanEntry row .1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1

An entry in vturWanTable.

Indexes

BRIDGE-MIBdot1dBasePort vturWanIndex

Column	Syntax	OID
vturWanIndex Display the wan index range from 1 to 4 we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.1
vturVlanTagging Display the vlan tagging we got in CPE side	Enumerationr/w Enumerated Values: 1 disable 2 vlan_mux 3 auto_vlan	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.2
vturVlanID Display the vlan id range from 1 to 4094 we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.3
vtur8021p Display the 802.1p value range from 0 to 7 we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.4
vturPPPUsername Display the PPP username we got in CPE side	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.5
vturPPPPassword Display the PPP password we got in CPE side	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.6
vturWanProtocol Display the wan protocol info we got in CPE side	Enumerationr/w Enumerated Values: 1 pppoe 2 mer 3 bridge	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.7
vturWanProtocolSetting Display the wan service enable/disable status we got in CPE side	Bitsr/w Enumerated Values: 0 dhcp_client_ 1 nat 2 firewall 3 igmp	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.8
vturWanIP Display the wan IP setting we got in CPE side	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.9
vturWanSubnetMask Display the wan subnet mask we got in CPE side	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.10
vturWanService Display the wan service enable/disable status we got in CPE side	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.11
vturWanRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.12
vturWanDefaultGateway Display the wan default gateway enable/disable status we got in CPE side	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.13

vturWanCommonTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.4.2.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturWanCommonTable'

Copy

vturWanCommonEntry row .1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1

An entry in vturWanCommonTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturWanQoS	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.1
vturEnableAutoDefaultGateway Display the enable auto default gateay setting we get from CPE side	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.2
vturDefaultGatewayIP Display the default gateway setting we get from CPE side	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.3
vturVitualPortEnable Display Enable/Disable virtual port on eth1 setting we get on CPE side	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.4

vturClassificationTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.5.1 · 1 row entry · 25 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturClassificationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturClassificationTable'

Copy

vturClassificationEntry row .1.3.6.1.4.1.890.1.5.12.46.35.5.1.1

An entry in vturClassificationTable.

Indexes

BRIDGE-MIBdot1dBasePort vturClassificationIndex

Column	Syntax	OID
vturClassificationIndex Display the classification index range from 1 to 8 we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.1
vturClassificationRuleEnable Display the classification enable/disable status we got in CPE side	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.2
vturWanInterface Display the wan interface index range from 1 to 4 we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.3
vturClassificationQueue Display the assigned queue (1-4)802.1p value we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.4
vturClassification8021p Mark 802.1p if 802.1q is enabled [0-7]	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.5
vturClassificationVid Display the 802.1Q VLAN ID: [1-4094]	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.6
vturFilterPhysicalPort Physical LAN Port number	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.7
vturFilterProtocol Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4	Enumerationr/w Enumerated Values: 1 tcp_udp 2 tcp 3 udp 4 icmp	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.8
vturFilterSourceIP Display the filtering source IP we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.9
vturFilterSourceSubnetMask Display the filtering source subnet mask we got in CPE side	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.10
vturFilterDestinationIP Display the filtering destination IP we got in CPE side	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.11
vturFilterDestinationSubnetMask Display the filtering destination subnet mask we got in CPE side	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.12
vturFilterSourcePortStart Display the filtering source port start we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.13
vturFilterSourcePortEnd Display the filtering source port end we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.14
vturFilterDestinationPortStart Display the filtering destination port start we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.15
vturFilterDestinationPortEnd Display the filtering destination end port we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.16
vturFilterSourceMACAddr Display the filtering source MAC addr we got in CPE side	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.17
vturFilterSourceMACMask Display the filtering source MAC mask we got in CPE side	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.18
vturFilterDestinationMACAddr Display the filtering destination MAC addr we got in CPE side	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.19
vturFilterDestinationMACMask Display the filtering destination MAC mask we got in CPE side	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.20
vturFilter8021p Display the filtering 802.1p value we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.21
vturFilterProtocolType Display the filtering protocol type we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.22
vturPolicyGatewayIP Display the filtering protocol type we got in CPE side	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.23
vturClassificationRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.24
vturClassificationBandwidth Display limited bandwidth control(1-255 0:disable) we got in CPE side	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.25

vturMntTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.6.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturMntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturMntTable'

Copy

vturMntEntry row .1.3.6.1.4.1.890.1.5.12.46.35.6.1.1

An entry in VTUR Misc Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mntOperation Specify the operation of VTUR	Enumerationr/w Enumerated Values: 1 layer2Setup 2 portSetup 3 priorityQueueSetup 4 dot1qVlanSetup 5 portBasedVlanSetup 6 loadFactoryDefault 7 resetSW 8 apBasicSetup 9 apSecuritySetup 10 apRadiusSetup 11 apMacFilterSetup 12 apMacFilterAddrSetup 13 reinit 14 consoleSetup 15 remoteFunctionSetup 16 regetstatue 17 protocolBasedVlanSetup 18 vturWanSetup 19 vturClassificationSetup 20 vturLanSetup 21 vturResetCounter 22 loadDefaultWithoutIP	.1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.1
mntCommit Apply maintenance setting to vtur	Enumerationr/w Enumerated Values: 0 idle 1 commit	.1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.2
mntStatus Display the current status regarding to the operation.	Enumeration Enumerated Values: 0 in_progress 1 success 2 fail	.1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.3
mntRefetchCPEInfo Refetch current CPE information.	Enumerationr/w Enumerated Values: 0 none 1 refetching	.1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.4

vturAPGeneralStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPGeneralStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPGeneralStatisticsTable'

Copy

vturAPGeneralStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1

An entry in VTUR AP General Statistics Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
lanRxBytes Received bytes on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.1
lanRxPkts Received frames on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.2
lanTxBytes Transmitted bytes on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.3
lanTxPkts Transmitted frames on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.4
vdslRxBytes Received bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.5
vdslRxPkts Received frames on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.6
vdslTxBytes Transmitted bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.7
vdslTxPkts Transmitted frames on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.8
wlanRxBytes Received bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.9
wlanRxPkts Received frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.10
wlanRxErrs Received error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.11
wlanRxDrops Received drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.12
wlanTxBytes Transmitted bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.13
wlanTxPkts Transmitted frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.14
wlanTxErrs Transmitted error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.15
wlanTxDrops Transmitted drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.16

vturAPWlanBasicTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanBasicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanBasicTable'

Copy

vturAPWlanBasicEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1

An entry in VTUR AP Wlan Basic Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
enable 0: disable wlan 1: enable wlan	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.1
ssid SSID of the AP	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.2
bssid Mac address of AP	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.3
hidden 0: not hide AP's SSID 1: hide AP's SSID	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.4
channel Channel number of the AP	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.5
mode 1: B or G mix mode 2: Pure G mode 3: Pure B mode	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.6
txPower Transmit power 1: 30 mW 2: 15 mW	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.7
multicastRate Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps 0: auto 2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode 12, 18, 24, 36, 48, 96, 108: Transmit rate = 6…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.8

vturAPWlanSecurityTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanSecurityTable'

Copy

vturAPWlanSecurityEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
securityMode 1: No security 2: Static WEP 3: WPA-PSK 4: WPA 5: WPA2 6: WPA2-PSK	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.1
wepEncryp This field is for SecurityMode = static WEP. 1: 64-Bit 2: 128-Bit	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.2
keyId This field is for SecurityMode = static WEP. It indicate which key will be used for encryption. If KeyId is equal to 1, AP will use Key1 to encrypt frame.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.3
key1 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key1 will be 10 heximal digits. If WEPEncryp is 128-Bit, key1 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.4
key2 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key2 will be 10 heximal digits. If WEPEncryp is 128-Bit, key2 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.5
key3 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key3 will be 10 heximal digits. If WEPEncryp is 128-Bit, key3 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.6
key4 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key4 will be 10 heximal digits. If WEPEncryp is 128-Bit, key4 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.7
psk This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.8
wpaMix This field is for SecurityMode = WPA2 or WPA2-PSK. When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP. When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP co…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.9
reAuthTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger re-authentication with station every [ReAuthTime] seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.10
idleTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will flush station??s information if there are no packets from station for [idleTime] seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.11
gtkTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger the update of group key with station every [GTKTime] seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.12

vturAPWlanRadiusTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanRadiusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanRadiusTable'

Copy

vturAPWlanRadiusEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
authServIP This field is the IP address of authentication server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.1
authServPort This field is the port number of authentication server.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.2
authServSecret This field is the shared secret of authentication server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.3
accServActive This field is for activating or inactivating accounting server. 0: inactivate accounting server. 1: activate accounting server	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.4
accServIP This field is the IP address of accounting server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.5
accServPort This field is the port number of accounting server.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.6
accServSecret This field is the shared secret of accounting server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.7

vturAPWlanMacFilterTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanMacFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanMacFilterTable'

Copy

vturAPWlanMacFilterEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1.1

An entry in VTUR AP Wlan Mac Filter Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
macFltActive Activate or inactivate wlan MAC filter. 0: Inactive 1: Active	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1.1.1
macFltAction 0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8. 1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1.1.2

vturAPWlanMacFltAddrTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanMacFltAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanMacFltAddrTable'

Copy

vturAPWlanMacFltAddrEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort fltStaIndex

Column	Syntax	OID
fltStaIndex The index for Mac filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2.1.1
macFltAddr The address for Mac filter	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2.1.2

vturAPWlanStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatisticsTable'

Copy

vturAPWlanStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
inPkts Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.1
inOctets Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.2
inUCasts Received unicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.3
inMCasts Received multicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.4
rxFCSErrors Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.5
outPkts Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.6
outOctets Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.7
outUCasts Transmitted unicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.8
outMCasts Transmitted multicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.9

vturAPWlanStaListTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.7.2.6 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStaListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStaListTable'

Copy

vturAPWlanStaListEntry row .1.3.6.1.4.1.890.1.5.12.46.35.7.2.6.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort staIndex

Column	Syntax	OID
staIndex The index of associated WLAN STA. Max = 32, Min = 1	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.6.1.1
staMacAddr The address of associated WLAN STA	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.35.7.2.6.1.2

vturConsoleTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.8.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturConsoleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturConsoleTable'

Copy

vturConsoleEntry row .1.3.6.1.4.1.890.1.5.12.46.35.8.1.1

An entry in vturConsoleTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturConsoleSet	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.35.8.1.1.1
vturConsoleAdminPassword The operation for vtur device admin password	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.8.1.1.2
vturConsoleUserPassword The operation for vtur device user password	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.8.1.1.3

remoteFunctionTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.9.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk remoteFunctionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::remoteFunctionTable'

Copy

remoteFunctionEntry row .1.3.6.1.4.1.890.1.5.12.46.35.9.1.1

An entry in RemoteFunctionTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
telnet	Enumerationr/w Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.3
tftp	Enumerationr/w Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.4
web	Enumerationr/w Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.5
snmp	Enumerationr/w Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.6
ssh	Enumerationr/w Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.7
wireless	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.8

vturMacTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.10.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturMacTable'

Copy

vturMacTableEntry row .1.3.6.1.4.1.890.1.5.12.46.35.10.1.1

An entry in vturMacTable.

Indexes

BRIDGE-MIBdot1dBasePort staIndex

Column	Syntax	OID
vturMacIndex The index of associated vtur STA. Max = 32, Min = 1	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.10.1.1.1
vturMacAddr The address of associated vtur STA	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.35.10.1.1.2

vturLanTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.11.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturLanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturLanTable'

Copy

vturLanEntry row .1.3.6.1.4.1.890.1.5.12.46.35.11.1.1

An entry in vturLanTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturLanIP	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.11.1.1.1
vturLanSubnetmask	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.11.1.1.2
vturDHCPOption	Enumerationr/w Enumerated Values: 1 disable_dhcp_server 2 enable_dhcp_server 3 dhcp_server_relay	.1.3.6.1.4.1.890.1.5.12.46.35.11.1.1.3
vturDHCPServerStartIPAddr	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.11.1.1.4
vturDHCPServerEndIPAddr	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.11.1.1.5
vturDHCPServerSubnetmask	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.11.1.1.6
vturDHCPServerIPAddr	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.35.11.1.1.7

vturCFMTable

table

.1.3.6.1.4.1.890.1.5.12.46.35.12.1 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturCFMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturCFMTable'

Copy

vturCFMEntry row .1.3.6.1.4.1.890.1.5.12.46.35.12.1.1

An entry in vturCFMTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturCFMCommit Set 1 to commit CFM operation and read value always return 0	Enumerationr/w Enumerated Values: 1 commit	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.1
vturCFMMdName	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.2
vturCFMMaName	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.3
vturCFMVid	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.4
vturCFMMepId	IEEE8021-CFM-MIBDot1agCfmMepIdr/w Type Constraints: range: 1..8191	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.5
vturCFMMdLevel	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.6
vturCFMAction Currently only support 0:save ,3:send loopback message and 5:load cpe cfm default	Enumerationr/w Enumerated Values: 0 save 1 enable_cfm 2 disable_cfm 3 send_loopback_message 4 send_linktrace_message 5 reset_configuration	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.7
vturCFMDestMAC	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.8
vturCFMLBMCount	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.9
vturCFMResultSentLBM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.10
vturCFMResultInorderLBM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.11
vturCFMResultOutorderLBM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.12
vturMACAddr CPE MAC address	OctetString	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.13
vturCFMReadStatus Set 1 to commit CFM Read operation and read value always return 0	Enumerationr/w Enumerated Values: 1 commit	.1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.14

vturInfoTable

table

.1.3.6.1.4.1.890.1.5.12.46.37.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturInfoTable'

Copy

vturInfoEntry row .1.3.6.1.4.1.890.1.5.12.46.37.1.1

An entry in vturInfoTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturName Display remote device name	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.37.1.1.1
vturSysVersion Display remote device system version info	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.37.1.1.2
vturModemCodeVersion Display remote device VDSL modem code version info	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.37.1.1.3

protoBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.38.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk protoBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::protoBasedVlanTable'

Copy

protoBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.38.1.1

An entry in protoBasedVlanTable.

Indexes

protoBasedVlanPort protoBasedVlanPacketType protoBasedVlanEtherType

Column	Syntax	OID
protoBasedVlanPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.38.1.1.1
protoBasedVlanPacketType	Enumeration Enumerated Values: 1 etherII 2 snap 3 llc	.1.3.6.1.4.1.890.1.5.12.46.38.1.1.2
protoBasedVlanEtherType	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.38.1.1.3
protoBasedVlanName	RFC1213-MIBDisplayStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.12.46.38.1.1.4
protoBasedVlanVid	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.38.1.1.5
protoBasedVlanPriority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.12.46.38.1.1.6
protoBasedVlanState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.38.1.1.7

classifierRuleTable

table

.1.3.6.1.4.1.890.1.5.12.46.39.1 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk classifierRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::classifierRuleTable'

Copy

classifierRuleEntry row .1.3.6.1.4.1.890.1.5.12.46.39.1.1

An entry in classifierRuleTable.

Indexes

classifierName

Column	Syntax	OID
classifierName Name of classifier rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.1
classifierEnable Classifier rule enabled/disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.2
classifierPacketFormat Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5).	Enumerationr/w Enumerated Values: 1 all 2 ethernetII_untagged 3 ethernetII_tagged 4 ethernet802_3_untagged 5 ethernet802_3_tagged	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.3
classifierVlanId Vlan id for classifer rule, 1~4094.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.4
classifier8021pPriority 802.1p priority for classifier rule, 0~7.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.5
classifierEtherType Ether type for classifier rule, in decimal expression.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.6
classifierSrcMAC Source mac address for classifier rule	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.7
classifierIncomingPort Incoming Port for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.8
classifierDstMAC Destination mac address for classifier rule	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.9
classifierDSCP DSCP for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.10
classifierIpProtocol IP Protocol for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.11
classifierEstablishOnly IP Protocol for EstablishOnly for classifier rule	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.12
classifierSrcIp Source IP address for classifier rule	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.13
classifierSrcIpMask Source IP Mask for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.14
classifierSrcSocket Source Socket Number for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.15
classifierDstIp Destination IP address for classifier rule	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.16
classifierDstIpMask Destination IP Mask for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.17
classifierDstSocket Destination Socket Number for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.18
classifierRowstatus Row Status for classifier rule	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.19
classifierSrcIpv6 Source IPv6 address for classifier rule	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.20
classifierSrcIpv6Mask Source IPv6 Mask for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.21
classifierDstIpv6 Destination IPv6 address for classifier rule	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.22
classifierDstIpv6Mask Destination IPv6 Mask for classifier rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.39.1.1.23

policyTable

table

.1.3.6.1.4.1.890.1.5.12.46.40.1 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk policyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::policyTable'

Copy

policyEntry row .1.3.6.1.4.1.890.1.5.12.46.40.1.1

An entry in policyTable.

Indexes

policyName

Column	Syntax	OID
policyName Name of policy rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.1
policyEnable Policy rule enabled/disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.2
policyClassifier Classifier of policy rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.3
policyVlanId Vlan id for policy rule, 1~4094.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.4
policyEgressPort Egress Port for policy rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.5
policyOutPktFormat Outgoing packet format for Egress port for policy rule	Enumerationr/w Enumerated Values: 1 tag 2 untag	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.6
policy8021pPriority 802.1p priority for policy rule, 0~7.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.7
policyDSCP DSCP for policy rule.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.8
policyTOS TOS for policy rule, 0~7	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.9
policyBandwidth Bandwidth for policy rule	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.10
policyOutOfProfileDSCP Out Of Profile DSCP for policy rule.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.11
policyForwardingAction Forwarding Action for policy rule	Enumerationr/w Enumerated Values: 1 no_change 2 discard_the_packet 3 do_not_drop_the_matching_frame_previously_marked_for_dopping	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.12
policyPriorityAction Priority Action for policy rule	Enumerationr/w Enumerated Values: 1 no_change 2 set_the_packets_802_1_priority 3 send_the_packet_to_priority_queue 4 replace_the_802_1_priority_field_with_the_IP_TOS_value	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.13
policyDiffServAction DiffServ Action for policy rule	Enumerationr/w Enumerated Values: 1 no_change 2 set_the_packets_TOS_field 3 replace_the_IP_TOS_field_with_the_802_1_priority_value 4 set_the_Diffserv_Codepoint_field_in_the_frame	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.14
policyOutgoingAction Outgoing Action for policy rule	Bitsr/w Enumerated Values: 1 send_the_packet_to_the_mirror_port 2 send_the_packet_to_the_egress_port 3 send_the_matching_frames_to_the_egress_port 4 set_the_packets_VLAN_ID	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.15
policyMeteringEnable Metering for Policy rule enabled/disabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.16
policyOutOfProfileAction Out Of Profile Action for policy rule	Bitsr/w Enumerated Values: 1 drop_the_packet 2 change_the_DSCP_value 3 set_Out_Drop_Precedence 4 do_not_drop_the_matching_frame_previously_marked_for_dropping	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.17
policyRowstatus Row Status for policy rule	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.40.1.1.18

vlanCounterTable

table

.1.3.6.1.4.1.890.1.5.12.46.42.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanCounterTable'

Copy

vlanCounterEntry row .1.3.6.1.4.1.890.1.5.12.46.42.1.1

An entry in vlanCounterTable.

Indexes

IF-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanCounterTxPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.42.1.1.1
vlanCounterRxPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.42.1.1.2

switchCounterTable

table

.1.3.6.1.4.1.890.1.5.12.46.42.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk switchCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::switchCounterTable'

Copy

switchCounterEntry row .1.3.6.1.4.1.890.1.5.12.46.42.2.1

An entry in switchCounterTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
switchUnknownUnicastCounter Unknown unicast counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.42.2.1.1
switchtxratelimitdropcounter Rx Ratelimit drop counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.42.2.1.2
switchrxratelimitdropcounter Tx Ratelimit drop counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.890.1.5.12.46.42.2.1.3
switchrxmeterdropcounter Rx Metering drop counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.890.1.5.12.46.42.2.1.4

vlanCounterResetTable

table

.1.3.6.1.4.1.890.1.5.12.46.42.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanCounterResetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanCounterResetTable'

Copy

vlanCounterResetEntry row .1.3.6.1.4.1.890.1.5.12.46.42.3.1

An entry in vlanCounterTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanCounterReset Clear VLAN counters.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.42.3.1.1

rateLimitProfilePortTable

table

.1.3.6.1.4.1.890.1.5.12.46.43.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rateLimitProfilePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::rateLimitProfilePortTable'

Copy

rateLimitProfilePortEntry row .1.3.6.1.4.1.890.1.5.12.46.43.1.1

An entry in rateLimitProfilePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
rateLimitPortProfile	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.43.1.1.1

perQueueProfilePortTable

table

.1.3.6.1.4.1.890.1.5.12.46.43.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk perQueueProfilePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::perQueueProfilePortTable'

Copy

perQueueProfilePortEntry row .1.3.6.1.4.1.890.1.5.12.46.43.2.1

An entry in perQueueProfilePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
perQueuePortProfile	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.43.2.1.1

rateLimitProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.44.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rateLimitProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::rateLimitProfileTable'

Copy

rateLimitProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.44.2.1

An entry in rateLimitMaxNumberOfProfile.

Indexes

rateLimitProfileName

Column	Syntax	OID
rateLimitProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.1
rateLimitProfilePeakRate Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.2
rateLimitProfileEgrRate Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.3
rateLimitProfileCommitRate Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.4
rateLimitProfilePeakState Ingress peak rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.5
rateLimitProfileEgrState Egress rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.6
rateLimitProfileCommitState Ingress commit rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.7
rateLimitProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.44.2.1.8

perQueueProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.44.4 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk perQueueProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::perQueueProfileTable'

Copy

perQueueProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.44.4.1

An entry in perQueueMaxNumberOfProfile.

Indexes

perQueueProfileName

Column	Syntax	OID
perQueueProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.1
perQueueProfileQ0CIR Commit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.2
perQueueProfileQ0PIR Peak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.3
perQueueProfileQ1CIR Commit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.4
perQueueProfileQ1PIR Peak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.5
perQueueProfileQ2CIR Commit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.6
perQueueProfileQ2PIR Peak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.7
perQueueProfileQ3CIR Commit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.8
perQueueProfileQ3PIR Peak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.9
perQueueProfileQ4CIR Commit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.10
perQueueProfileQ4PIR Peak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.11
perQueueProfileQ5CIR Commit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.12
perQueueProfileQ5PIR Peak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.13
perQueueProfileQ6CIR Commit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.14
perQueueProfileQ6PIR Peak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.15
perQueueProfileQ7CIR Commit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.16
perQueueProfileQ7PIR Peak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.17
perQueueProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.44.4.1.18

vlanSecurityTable

table

.1.3.6.1.4.1.890.1.5.12.46.45.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanSecurityTable'

Copy

vlanSecurityEntry row .1.3.6.1.4.1.890.1.5.12.46.45.1.1

An entry in vlanSecurityTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanSecurityCount Number of (dynamic) MAC addresses that may be learned on the VID.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.45.1.1.1

cfmLoopbackPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.46.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cfmLoopbackPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::cfmLoopbackPortTable'

Copy

cfmLoopbackPortEntry row .1.3.6.1.4.1.890.1.5.12.46.46.1.1

An entry in cfmLoopbackPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
cfmLoopbackPortState CFM loopback enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.46.1.1.1

cfmMIPTable

table

.1.3.6.1.4.1.890.1.5.12.46.46.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cfmMIPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::cfmMIPTable'

Copy

cfmMIPEntry row .1.3.6.1.4.1.890.1.5.12.46.46.2.1

An entry in cfmMIPTable.

Indexes

cfmLevel cfmVlanID cfmPort

Column	Syntax	OID
cfmPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.46.2.1.1
cfmVlanID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.46.2.1.2
cfmLevel	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.46.2.1.3
cfmMIPRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.46.2.1.4

mrstpBridgeTable

table

.1.3.6.1.4.1.890.1.5.12.46.48.1.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mrstpBridgeTable'

Copy

mrstpBridgeEntry row .1.3.6.1.4.1.890.1.5.12.46.48.1.1.1

An entry in mrstpBridgeTable.

Indexes

mrstpBridgeIndex

Column	Syntax	OID
mrstpBridgeIndex The tree index of the MRSTP.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.1
mrstpState Enabled/disabled on the mrstp bridge.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.2
mrstpProtocolSpecification An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If fut…	Enumeration Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.3
mrstpPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.4
mrstpTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.5
mrstpTopChanges The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.6
mrstpDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originat…	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.7
mrstpRootCost The cost of the path to the root as seen from this bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.8
mrstpRootPort The port number of the port which offers the lowest cost path from this bridge to the root bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.9
mrstpMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.10
mrstpHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.11
mrstpHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.12
mrstpForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.13
mrstpBridgeMaxAge The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeHelloTime. The granularity of th…	BRIDGE-MIBTimeoutr/w Constraints: range: 600-4000	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.14
mrstpBridgeHelloTime The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempte…	BRIDGE-MIBTimeoutr/w Constraints: range: 100-1000	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.15
mrstpBridgeForwardDelay The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity o…	BRIDGE-MIBTimeoutr/w Constraints: range: 400-3000	.1.3.6.1.4.1.890.1.5.12.46.48.1.1.1.16

mrstpPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.48.1.2 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mrstpPortTable'

Copy

A table that contains port-specific information
for the Spanning Tree Protocol.

mrstpPortEntry row .1.3.6.1.4.1.890.1.5.12.46.48.1.2.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

mrstpPort

Column	Syntax	OID
mrstpPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.1
mrstpPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.2
mrstpPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.3
mrstpPortEnable The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.4
mrstpPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.5
mrstpPortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.6
mrstpPortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.7
mrstpPortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.8
mrstpPortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.9
mrstpPortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.10
mrstpPortOnBridgeIndex Indetify the bridge index that this port joined to in MRSTP.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.48.1.2.1.11

dhcpSnpVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.49.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::dhcpSnpVlanTable'

Copy

dhcpSnpVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.49.1.1

Indexes

dhcpSnpVlanEntryVid

Column	Syntax	OID
dhcpSnpVlanEntryVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.49.1.1.1
dhcpSnpVlanEntryEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.49.1.1.2
dhcpSnpVlanEntryOption82Enable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.49.1.1.3
dhcpSnpVlanEntryInfo	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.49.1.1.4
dhcpSnpVlanEntryRemoteID	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.49.1.1.5

dhcpSnpPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.49.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::dhcpSnpPortTable'

Copy

dhcpSnpPortEntry row .1.3.6.1.4.1.890.1.5.12.46.49.2.1

Indexes

dhcpSnpPortEntryPort

Column	Syntax	OID
dhcpSnpPortEntryPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.49.2.1.1
dhcpSnpPortEntryTrust	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.49.2.1.2
dhcpSnpPortEntryRate 0 means unlimited	Integer32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.890.1.5.12.46.49.2.1.3

dhcpSnpBindTable

table

.1.3.6.1.4.1.890.1.5.12.46.49.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpBindTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::dhcpSnpBindTable'

Copy

dhcpSnpBindEntry row .1.3.6.1.4.1.890.1.5.12.46.49.3.1

Indexes

dhcpSnpBindEntryMac dhcpSnpBindEntryVid

Column	Syntax	OID
dhcpSnpBindEntryMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.49.3.1.1
dhcpSnpBindEntryVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.49.3.1.2
dhcpSnpBindEntryIP	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.49.3.1.3
dhcpSnpBindEntryLease	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.49.3.1.4
dhcpSnpBindEntryType	Enumeration Enumerated Values: 2 dynamic	.1.3.6.1.4.1.890.1.5.12.46.49.3.1.5
dhcpSnpBindEntryPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.49.3.1.6

ipsgTable

table

.1.3.6.1.4.1.890.1.5.12.46.50.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipsgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::ipsgTable'

Copy

ipsgEntry row .1.3.6.1.4.1.890.1.5.12.46.50.1.1

Indexes

ipsgEntryMac ipsgEntryVid

Column	Syntax	OID
ipsgEntryMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.50.1.1.1
ipsgEntryVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.50.1.1.2
ipsgEntryIp	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.50.1.1.3
ipsgEntryLease second	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.50.1.1.4
ipsgEntryType	Enumeration Enumerated Values: 1 static 2 dhcp	.1.3.6.1.4.1.890.1.5.12.46.50.1.1.5
ipsgEntryPort 0 means any port	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.50.1.1.6
ipsgEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.50.1.1.7

arpInspectVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.51.1.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::arpInspectVlanTable'

Copy

arpInspectVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.51.1.4.1

Indexes

arpInspectVlanVid

Column	Syntax	OID
arpInspectVlanVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.51.1.4.1.1
arpInspectVlanLog	Enumerationr/w Enumerated Values: 1 all 2 none 3 permit 4 deny	.1.3.6.1.4.1.890.1.5.12.46.51.1.4.1.2
arpInspectVlanStatus	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.51.1.4.1.3

arpInspectPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.51.1.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::arpInspectPortTable'

Copy

arpInspectPortEntry row .1.3.6.1.4.1.890.1.5.12.46.51.1.5.1

Indexes

arpInspectPortIndex

Column	Syntax	OID
arpInspectPortIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.1
arpInspectPortTrust	Enumerationr/w Enumerated Values: 1 trusted 2 untrusted	.1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.2
arpInspectPortRate	Integer32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.3
arpInspectPortInterval	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.4

arpInspectFilterTable

table

.1.3.6.1.4.1.890.1.5.12.46.51.2.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::arpInspectFilterTable'

Copy

arpInspectFilterEntry row .1.3.6.1.4.1.890.1.5.12.46.51.2.3.1

Indexes

arpInspectFilterMac arpInspectFilterVid

Column	Syntax	OID
arpInspectFilterMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.1
arpInspectFilterVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.2
arpInspectFilterPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.3
arpInspectFilterExpiry	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.4
arpInspectFilterReason	Enumeration Enumerated Values: 1 macVid 2 port 3 ip	.1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.5
arpInspectFilterRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.6

arpInspectLogTable

table

.1.3.6.1.4.1.890.1.5.12.46.51.2.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::arpInspectLogTable'

Copy

arpInspectLogEntry row .1.3.6.1.4.1.890.1.5.12.46.51.2.4.1

Indexes

arpInspectLogMac arpInspectLogVid arpInspectLogPort arpInspectLogIp arpInspectLogReason

Column	Syntax	OID
arpInspectLogMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.1
arpInspectLogVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.2
arpInspectLogPort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.3
arpInspectLogIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.4
arpInspectLogNumPkt	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.5
arpInspectLogReason	Enumeration Enumerated Values: 1 deny 2 denyStatic 3 denyDHCP 4 permitStatic 5 permitDHCP	.1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.6
arpInspectLogTime	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.7

arpInspectStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.46.51.2.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::arpInspectStatisticsTable'

Copy

arpInspectStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.46.51.2.5.1

Indexes

arpInspectStatisticsVid

Column	Syntax	OID
arpInspectStatisticsVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.1
arpInspectStatisticsReceived	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.2
arpInspectStatisticsRequest	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.3
arpInspectStatisticsReply	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.4
arpInspectStatisticsForward	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.5
arpInspectStatisticsDrop	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.6
arpInspectStatisticsClear	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.7

trTCMPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.52.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk trTCMPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::trTCMPortTable'

Copy

trTCMPortEntry row .1.3.6.1.4.1.890.1.5.12.46.52.3.1

An entry in trTCMPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
trTCMPortState Two-rate three color marker enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.52.3.1.1
trTCMPortCIR Allowed CIR in pkts/s.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.52.3.1.2
trTCMPortPIR Allowed PIR in pkts/s.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.52.3.1.3
trTCMPortDscpGreen 0-63	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.52.3.1.4
trTCMPortDscpYellow 0-63	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.52.3.1.5
trTCMPortDscpRed 0-63	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.52.3.1.6

loopGuardPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.53.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopGuardPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::loopGuardPortTable'

Copy

loopGuardPortEntry row .1.3.6.1.4.1.890.1.5.12.46.53.2.1

An entry in loopGuardPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
loopGuardPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.53.2.1.1
loopGuardPortMode Specify loopguard mode for each port	Enumerationr/w Enumerated Values: 1 fix 2 dynamic	.1.3.6.1.4.1.890.1.5.12.46.53.2.1.2
loopGuardPortRecoverTime recover time to activate port in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.53.2.1.3

loopGuardStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.53.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopGuardStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::loopGuardStatusTable'

Copy

loopGuardStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.53.3.1

An entry in loopGuardStatusTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
loopGuardStatusTxPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.53.3.1.1
loopGuardStatusRxPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.53.3.1.2
loopGuardStatusBadPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.53.3.1.3
loopGuardStatusShutdownTime	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.53.3.1.4

subnetBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.54.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::subnetBasedVlanTable'

Copy

subnetBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.54.3.1

An entry in subnetBasedVlanTable.

Indexes

subnetBasedVlanSrcIp subnetBasedVlanSrcMaskBit

Column	Syntax	OID
subnetBasedVlanSrcIp source ip for subnet-based vlan entry	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.54.3.1.1
subnetBasedVlanSrcMaskBit source ip mask-bits for subnet-based vlan entry	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.46.54.3.1.2
subnetBasedVlanName name for subnet-based vlan entry	RFC1213-MIBDisplayStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.12.46.54.3.1.3
subnetBasedVlanVid vid for subnet-based vlan entry	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.54.3.1.4
subnetBasedVlanPriority priority for subnet-based vlan entry	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.12.46.54.3.1.5
subnetBasedVlanEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.54.3.1.6

subnetBasedVlanInfoTable

table

.1.3.6.1.4.1.890.1.5.12.46.54.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::subnetBasedVlanInfoTable'

Copy

subnetBasedVlanInfoEntry row .1.3.6.1.4.1.890.1.5.12.46.54.4.1

An entry in subnetBasedVlanInfoTable.

Indexes

subnetBasedVlanInfoSrcIpType subnetBasedVlanInfoSrcIp subnetBasedVlanInfoSrcMaskBit

Column	Syntax	OID
subnetBasedVlanInfoSrcIpType Ip type for subnet-based vlan entry	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.54.4.1.1
subnetBasedVlanInfoSrcIp source ip of IPv4 or IPv6 for subnet-based vlan entry	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.54.4.1.2
subnetBasedVlanInfoSrcMaskBit source ip mask-bits for subnet-based vlan entry	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.46.54.4.1.3
subnetBasedVlanInfoName name for subnet-based vlan entry	RFC1213-MIBDisplayStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.12.46.54.4.1.4
subnetBasedVlanInfoVid vid for subnet-based vlan entry	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.54.4.1.5
subnetBasedVlanInfoPriority priority for subnet-based vlan entry	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.12.46.54.4.1.6
subnetBasedVlanInfoEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.54.4.1.7

macAuthenticationPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.55.5 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macAuthenticationPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::macAuthenticationPortTable'

Copy

macAuthenticationPortEntry row .1.3.6.1.4.1.890.1.5.12.46.55.5.1

An entry in macAuthenticationPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
macAuthenticationPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.55.5.1.1

mstMapTable

table

.1.3.6.1.4.1.890.1.5.12.46.56.20 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mstMapTable'

Copy

This table contains one entry for each instance of MSTP.

mstMapEntry row .1.3.6.1.4.1.890.1.5.12.46.56.20.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstMapIndex

Column	Syntax	OID
mstMapIndex Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation	MstiOrCistInstanceIndex Type Constraints: range: 0..16 Description: This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).	.1.3.6.1.4.1.890.1.5.12.46.56.20.1.1
mstMapVlans1k A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to …	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.46.56.20.1.2
mstMapVlans2k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.46.56.20.1.3
mstMapVlans3k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.46.56.20.1.4
mstMapVlans4k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.46.56.20.1.5
mstMapRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.56.20.1.6

mstVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.56.30 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mstVlanTable'

Copy

This table contains one entry for each VlanId.

mstVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.56.30.1

Information regarding the instance to which each Vlan is mapped.

Indexes

mstVlanIndex

Column	Syntax	OID
mstVlanIndex The VlanId for which this entry contains the instance mapped.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.46.56.30.1.1
mstVlanMstIndex An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped	MstiOrCistInstanceIndex Type Constraints: range: 0..16 Description: This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).	.1.3.6.1.4.1.890.1.5.12.46.56.30.1.2

mstpPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.56.40 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mstpPortTable'

Copy

A table that contains generic information about
every port that is associated with this bridge.

mstpPortEntry row .1.3.6.1.4.1.890.1.5.12.46.56.40.1

A list of information for each port of the
bridge.

Indexes

mstpPortIndex

Column	Syntax	OID
mstpPortIndex A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.46.56.40.1.1
mstpPortOperEdgePort	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.12.46.56.40.1.2
mstpPortOperPointToPointMAC	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.12.46.56.40.1.3

mstpXstTable

table

.1.3.6.1.4.1.890.1.5.12.46.56.50 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mstpXstTable'

Copy

.

mstpXstEntry row .1.3.6.1.4.1.890.1.5.12.46.56.50.1

.

Indexes

mstpXstId

Column	Syntax	OID
mstpXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: range: 0..16 Description: This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).	.1.3.6.1.4.1.890.1.5.12.46.56.50.1.1
mstpXstBridgePriority Bridge priority, in steps of 4096.	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.890.1.5.12.46.56.50.1.2
mstpXstBridgeId .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.46.56.50.1.3
mstpXstInternalRootCost .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.56.50.1.4
mstpXstRootPort .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.56.50.1.5
mstpXstTimeSinceTopologyChange .	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.56.50.1.6
mstpXstTopologyChangesCount .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.56.50.1.7

mstpXstPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.56.60 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::mstpXstPortTable'

Copy

.

mstpXstPortEntry row .1.3.6.1.4.1.890.1.5.12.46.56.60.1

.

Indexes

mstpXstPortXstId mstpXstPortIndex

Column	Syntax	OID
mstpXstPortXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: range: 0..16 Description: This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.1
mstpXstPortIndex The value of mstpPortIndex of the Port in mstpPortTable.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.2
mstpXstPortEnable .	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.3
mstpXstPortPriority Port priority, in steps of 16.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.4
mstpXstPortPathCost .	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.5
mstpXstPortState .	Enumeration Enumerated Values: 0 disabled 1 discarding 2 learning 3 forwarding 4 unknown	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.6
mstpXstPortDesignatedRoot .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.7
mstpXstPortDesignatedCost .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.8
mstpXstPortDesignatedBridge .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.9
mstpXstPortDesignatedPort .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.56.60.1.10

radiusAuthServerTable

table

.1.3.6.1.4.1.890.1.5.12.46.57.1.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::radiusAuthServerTable'

Copy

radiusAuthServerEntry row .1.3.6.1.4.1.890.1.5.12.46.57.1.3.1

An entry in radiusAuthServerTable.

Indexes

radiusAuthServerIndex

Column	Syntax	OID
radiusAuthServerIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.1
radiusAuthServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.2
radiusAuthServerUdpPort	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.3
radiusAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.4
radiusAuthServerIpAddressType	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.5
radiusAuthServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.6

radiusAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.46.57.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::radiusAcctServerTable'

Copy

radiusAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.46.57.2.2.1

An entry in radiusAcctServerTable.

Indexes

radiusAcctServerIndex

Column	Syntax	OID
radiusAcctServerIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.1
radiusAcctServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.2
radiusAcctServerUdpPort	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.3
radiusAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.4
radiusAcctServerIpAddressType	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.5
radiusAcctServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.6

tacacsAuthServerTable

table

.1.3.6.1.4.1.890.1.5.12.46.58.1.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::tacacsAuthServerTable'

Copy

tacacsAuthServerEntry row .1.3.6.1.4.1.890.1.5.12.46.58.1.3.1

An entry in tacacsAuthServerTable.

Indexes

tacacsAuthServerIndex

Column	Syntax	OID
tacacsAuthServerIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.1
tacacsAuthServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.2
tacacsAuthServerTcpPort	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.3
tacacsAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.4
tacacsAuthServerIpAddressType	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.5
tacacsAuthServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.6

tacacsAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.46.58.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::tacacsAcctServerTable'

Copy

tacacsAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.46.58.2.2.1

An entry in tacacsAcctServerTable.

Indexes

tacacsAcctServerIndex

Column	Syntax	OID
tacacsAcctServerIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.1
tacacsAcctServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.2
tacacsAcctServerTcpPort	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.3
tacacsAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.4
tacacsAcctServerIpAddressType	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.5
tacacsAcctServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.6

authenticationTypeTable

table

.1.3.6.1.4.1.890.1.5.12.46.59.1.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authenticationTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::authenticationTypeTable'

Copy

authenticationTypeEntry row .1.3.6.1.4.1.890.1.5.12.46.59.1.1.1

An entry in authenticationTypeTable.

Indexes

authenticationTypeName

Column	Syntax	OID
authenticationTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.59.1.1.1.1
authenticationTypeMethodList Enable-local: 1, Login-local: 2, radius: 3, tacacs+: 4	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.46.59.1.1.1.2

accountingTypeTable

table

.1.3.6.1.4.1.890.1.5.12.46.59.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accountingTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::accountingTypeTable'

Copy

accountingTypeEntry row .1.3.6.1.4.1.890.1.5.12.46.59.2.2.1

An entry in accountingTypeTable.

Indexes

accountingTypeName

Column	Syntax	OID
accountingTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.1
accountingTypeActive	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.2
accountingTypeBroadcast	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.3
accountingTypeMode	Enumerationr/w Enumerated Values: 1 start_stop 2 stop_only 255 not_available	.1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.4
accountingTypeMethod	Enumerationr/w Enumerated Values: 1 radius 2 tacacs	.1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.5
accountingTypePrivilege	Enumerationr/w Enumerated Values: 0 privilege_0 1 privilege_1 2 privilege_2 3 privilege_3 4 privilege_4 5 privilege_5 6 privilege_6 7 privilege_7 8 privilege_8 9 privilege_9 10 privilege_10 11 privilege_11 12 privilege_12 13 privilege_13 14 privilege_14 255 not_available	.1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.6

xdsl2ExtLineTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.1.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtLineTable'

Copy

The table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product.

xdsl2ExtLineEntry row .1.3.6.1.4.1.890.1.5.12.46.60.1.1.1

The table xdsl2ExtLineTable contains extra functions besides those in
xdsl2LineTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xdsl2LineCmndConfSelt Trigger a SELT(Single End Loop Test) for the line. Note the loop should be open.	VDSL2-LINE-TC-MIBXdsl2LineLdsfr/w Type Values: 0 inhibit 1 force	.1.3.6.1.4.1.890.1.5.12.46.60.1.1.1.1

xdsl2ExtLineBandTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.1.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtLineBandTable'

Copy

The table xdsl2ExtLineBandTable extends xdsl2LineBandTable for 
ZyXEL product.

xdsl2ExtLineBandEntry row .1.3.6.1.4.1.890.1.5.12.46.60.1.2.1

The table xdsl2ExtLineBandTable contains extra per-band line
status parameters besides those in xdsl2LineBandTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2LineBand

Column	Syntax	OID
xdsl2LineBandStatusActAtp Actual Aggregate Transmit Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.	0.1 dBmInteger32 Constraints: range: 2147483647-2147483647 range: -310-310	.1.3.6.1.4.1.890.1.5.12.46.60.1.2.1.1
xdsl2LineBandStatusActRxPwr Actual Aggregate Receive Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.	0.1 dBmInteger32 Constraints: range: -255-255 range: 2147483647-2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.1.2.1.2

xdsl2ExtLineSegmentTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.2.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineSegmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtLineSegmentTable'

Copy

The table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for 
ZyXEL product.

xdsl2ExtLineSegmentEntry row .1.3.6.1.4.1.890.1.5.12.46.60.2.1.1

The table xdsl2LineExtSegmentEntry contains extra line segment
status parameters besides those in xdsl2LineSegmentTable.

This table stores HLOG/QLN/SNR measured during initialization.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2LineSegmentDirection VDSL2-LINE-MIBxdsl2LineSegment

Column	Syntax	OID
xdsl2LineSegmentLog This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentLog.	dBOctetString Constraints: range: 0-1024	.1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.1
xdsl2LineSegmentQln This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentQln.	dBm/HzOctetString Constraints: range: 0-512	.1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.2
xdsl2LineSegmentSnr This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentSnr.	0.5 dBOctetString Constraints: range: 0-512	.1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.3
xdsl2LineSegmentStatus This parameter indicates whether the Hlog/Qln/Snr data is ready.	Bits Enumerated Values: 0 hlogReady 1 qlnReady 2 snrReady	.1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.4
xdsl2LineSegmentLogScGroupSize Number of subcarriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for …	Unsigned32 Constraints: range: 8-8 range: 4-4 range: 1-2	.1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.5
xdsl2LineSegmentQlnScGroupSize Number of subcarriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is eq…	Unsigned32 Constraints: range: 8-8 range: 4-4 range: 1-2	.1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.6
xdsl2LineSegmentSnrScGroupSize Number of subcarriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the siz…	Unsigned32 Constraints: range: 1-2 range: 8-8 range: 4-4	.1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.7

xdsl2ExtChannelStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChannelStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtChannelStatusTable'

Copy

The table xdsl2ExtChannelStatusTable extends xdsl2ChannelStatusTable for 
ZyXEL product.

xdsl2ExtChannelStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.60.2.2.1

The table xdsl2ExtChannelStatusTable contains extra subcarrier
status parameters besides those in xdsl2ChannelStatusTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2ChStatusUnit

Column	Syntax	OID
xdsl2ChannelStatusActualRaMode The actual RA mode. The possible values are: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled	Xdsl2StatusActualRaMode Type Values: 0 none 1 fixedRateMode 2 raInit 3 dynamicRa 4 sosEnabled Description: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled	.1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.1
xdsl2ChannelStatusRetransmissionMode RTX_USED operational data parameter. The possible values are: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use beca…	Xdsl2StatusRtxMode Type Values: 0 none 1 rtxInUse 2 rtxForbidden 3 rtxNotSupportedXtuC 4 rtxNotSupportedXtuR 5 rtxNotSupportedBoth Description: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX n…	.1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.2
xdsl2ChannelStatusRetransmissionOverhead Expected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps.	kbpsUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.3
xdsl2ChannelStatusGinpFramingType This parameter is equal to zero if G.inp is not enabled. If G.inp is enabled, it reports the framing type in use (1, 2, 3, or 4).	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.4
xdsl2ChannelStatusActualInpAgainstREIN This parameter reports the actual INP against REIN noise. Unit is 1/2 symbol.	1/2 symbolUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.5
xdsl2ChannelStatusReedSolomonCodeWordPerDtu This parameter reports the number of RS codewords per DTU. It is equal to D when PhyR is enabled.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.6

xdsl2ExtSCStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.2.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSCStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtSCStatusTable'

Copy

The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for 
ZyXEL product.

xdsl2ExtSCStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.60.2.3.1

The table xdsl2ExtSCStatusTable contains extra subcarrier
status parameters besides those in xdsl2SCStatusTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusDirection

Column	Syntax	OID
xdsl2SCStatusActAtp Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical va…	0.1 dBmInteger32 Constraints: range: 2147483647-2147483647 range: -310-310	.1.3.6.1.4.1.890.1.5.12.46.60.2.3.1.1

xdsl2ExtSCStatusBandTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.2.4 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSCStatusBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtSCStatusBandTable'

Copy

The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for 
ZyXEL product.

xdsl2ExtSCStatusBandEntry row .1.3.6.1.4.1.890.1.5.12.46.60.2.4.1

The table xdsl2ExtSCStatusBandTable contains extra subcarrier
status parameters that are grouped per-band besides those in
xdsl2SCStatusBandTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusBand

Column	Syntax	OID
xdsl2SCStatusBandSnrMargin SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for a…	0.1 dBInteger32 Constraints: range: 2147483646-2147483647 range: -640-630	.1.3.6.1.4.1.890.1.5.12.46.60.2.4.1.1

xdsl2ExtSeltStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.2.6 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtSeltStatusTable'

Copy

The table xdsl2ExtSeltStatusTable contains SELT status.

xdsl2ExtSeltStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.60.2.6.1

The table xdsl2ExtSeltStatusEntry contains SELT status.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xdsl2SeltStatusLineType	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.60.2.6.1.2
xdsl2SeltStatusLineLength	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.2.6.1.3

xdsl2ExtSeltReflectionStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.2.7 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltReflectionStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtSeltReflectionStatusTable'

Copy

The table xdsl2ExtSeltReflectionStatusTable contains SELT status 
for each reflection.

xdsl2ExtSeltReflectionStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.60.2.7.1

The table xdsl2ExtSeltReflectionStatusTable contains SELT status
for each reflection.

Indexes

IF-MIBifIndex xdsl2SeltReflection

Column	Syntax	OID
xdsl2SeltReflection	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.1
xdsl2SeltDelay	0.1Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.2
xdsl2SeltError	0.1Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.3
xdsl2SeltAtn180kHz	0.1Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.4
xdsl2SeltAtn300kHz	0.1Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.5
xdsl2SeltFitError	0.1Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.6
xdsl2SeltFitTermination	0.2Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.7

xdsl2ExtPMLineCurrTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1 · 1 row entry · 29 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtPMLineCurrTable'

Copy

The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.

xdsl2ExtPMLineCurrEntry row .1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1

The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLCurrUnit

Column	Syntax	OID
xdsl2PMLSinceLinkFecs Count of seconds since last link up that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.1
xdsl2PMLSinceLinkEs Count of seconds since last link up that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RD…	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.2
xdsl2PMLSinceLinkSes Count of seconds since last link up that that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE anomalies in one or m…	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.3
xdsl2PMLSinceLinkLoss Count of seconds since last link up that there was LOS (or LOS-FE for xTU-R).	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.4
xdsl2PMLSinceLinkUas Count of seconds in Unavailability State since last line up. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.5
xdsl2PMLSinceLinkLofs Count of seconds since last link up that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.6
xdsl2PMLSinceLinkLol Count of times the line loss of link since last link up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.7
xdsl2PMLSinceLinkLols Count of seconds since last link up that there was Loss of Link .	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.8
xdsl2PMLSinceLinkLpr Count of the line loss of power since last link up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.9
xdsl2PMLSinceLinkLprs Count of seconds since last link up that there was Loss of Power .	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.10
xdsl2PMLCurr15MLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.11
xdsl2PMLCurr15MLol Count of times during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.12
xdsl2PMLCurr15MLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.13
xdsl2PMLCurr15MLpr Count of times during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.14
xdsl2PMLCurr15MLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.15
xdsl2PMLCurr1DayLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.16
xdsl2PMLCurr1DayLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.17
xdsl2PMLCurr1DayLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.18
xdsl2PMLCurr1DayLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.19
xdsl2PMLCurr1DayLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.20
xdsl2PMLSinceLinkInmEqInp The INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.21
xdsl2PMLSinceLinkInmIAT The INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the parti…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.22
xdsl2PMLSinceLinkInmME The INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	symbolsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.23
xdsl2PMLCurr15MInmEqInp The INM Equivalent Inp histogram during this 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular inde…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.24
xdsl2PMLCurr15MInmIAT The INM Inter Arrival Time histogram during this 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.25
xdsl2PMLCurr15MInmME The INM total measurement during this 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.26
xdsl2PMLCurr1DayInmEqInp The INM Equivalent Inp histogram during this 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular ind…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.27
xdsl2PMLCurr1DayInmIAT The INM Inter Arrival Time histogram during this 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.28
xdsl2PMLCurr1DayInmME The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.29

xdsl2ExtPMLineHist15MinTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineHist15MinTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtPMLineHist15MinTable'

Copy

The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.

xdsl2ExtPMLineHist15MinEntry row .1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1

The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLHist15MUnit VDSL2-LINE-MIBxdsl2PMLHist15MInterval

Column	Syntax	OID
xdsl2PMLHist15MLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.1
xdsl2PMLHist15MLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.2
xdsl2PMLHist15MLols Count of seconds during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.3
xdsl2PMLHist15MLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.4
xdsl2PMLHist15MLprs Count of seconds during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.5
xdsl2PMLHist15MInmEqInp The INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index o…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.6
xdsl2PMLHist15MInmIAT The INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the pa…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.7
xdsl2PMLHist15MInmME The INM total measurement during 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.8

xdsl2ExtPMLineHist1DayTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineHist1DayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtPMLineHist1DayTable'

Copy

The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.

xdsl2ExtPMLineHist1DayEntry row .1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1

The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLHist1DUnit VDSL2-LINE-MIBxdsl2PMLHist1DInterval

Column	Syntax	OID
xdsl2PMLHist1DLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.1
xdsl2PMLHist1DLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.2
xdsl2PMLHist1DLols Count of seconds during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.3
xdsl2PMLHist1DLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.4
xdsl2PMLHist1DLprs Count of seconds during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.5
xdsl2PMLHist1DInmEqInp The INM Equivalent Inp histogram during 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.6
xdsl2PMLHist1DInmIAT The INM Inter Arrival Time histogram during 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the par…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.7
xdsl2PMLHist1DInmME The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.8

xdsl2ExtPMChCurrTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtPMChCurrTable'

Copy

The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.

xdsl2ExtPMChCurrEntry row .1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1

The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChCurrUnit

Column	Syntax	OID
xdsl2PMChSinceLinkUncorrectedCWs Count of codewords that could not be corrected since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.1
xdsl2PMChCurr15MUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.2
xdsl2PMChCurr1DayUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.3
xdsl2PMChSinceLinkCodingViolations Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.4
xdsl2PMChSinceLinkCorrectedBlocks Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.5
xdsl2PMChSinceLinkRtx Number of codewords retransmitted since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.6
xdsl2PMChCurr15MRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.7
xdsl2PMChCurr1DayRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.8
xdsl2PMChSinceLinkRtxCorrected Number of codewords corrected through retransmission since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.9
xdsl2PMChCurr15MRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.10
xdsl2PMChCurr1DayRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.11
xdsl2PMChSinceLinkRtxUncorrected Number of codewords left uncorrected after retransmission since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.12
xdsl2PMChCurr15MRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.13
xdsl2PMChCurr1DayRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.14
xdsl2PMChSinceLinkLEFTRs Low Error-Free Throughput Rate Seconds since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.15
xdsl2PMChCurr15MLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.16
xdsl2PMChCurr1DayLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.17
xdsl2PMChSinceLinkMinEFTR Lowest EFTR observed since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.18
xdsl2PMChCurr15MMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.19
xdsl2PMChCurr1DayMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.20
xdsl2PMChSinceLinkErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) since last link up.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.21
xdsl2PMChCurr15MErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.22
xdsl2PMChCurr1DayErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.23

xdsl2ExtPMChHist15MinTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChHist15MinTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtPMChHist15MinTable'

Copy

The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.

xdsl2ExtPMChHist15MinEntry row .1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1

The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChHist15MUnit VDSL2-LINE-MIBxdsl2PMChHist15MInterval

Column	Syntax	OID
xdsl2PMChHist15MUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.1
xdsl2PMChHist15MRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.2
xdsl2PMChHist15MRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.3
xdsl2PMChHist15MRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.4
xdsl2PMChHist15MLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.5
xdsl2PMChHist15MMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.6
xdsl2PMChHist15MErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.7

xdsl2ExtPMChHist1DTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChHist1DTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtPMChHist1DTable'

Copy

The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.

xdsl2ExtPMChHist1DEntry row .1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1

The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChHist1DUnit VDSL2-LINE-MIBxdsl2PMChHist1DInterval

Column	Syntax	OID
xdsl2PMChHist1DayUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.1
xdsl2PMChHist1DayRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.2
xdsl2PMChHist1DayRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.3
xdsl2PMChHist1DayRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.4
xdsl2PMChHist1DayLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.5
xdsl2PMChHist1DayMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.6
xdsl2PMChHist1DayErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.7

xdsl2ExtLineConfTemplateTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.5.1.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineConfTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtLineConfTemplateTable'

Copy

The table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.

xdsl2ExtLineConfTemplateEntry row .1.3.6.1.4.1.890.1.5.12.46.60.5.1.1.1

TThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.

Indexes

VDSL2-LINE-MIBxdsl2LConfTempTemplateName

Column	Syntax	OID
xdsl2LConfTempPortList A port list that indicates which ports this template applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.1.1.1
xdsl2LConfTempInmConfProfile The value of this object identifies the row in the VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table, (xdsl2ExtInmConfProfTable) that applies for this DSL line.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.1.1.2

xdsl2ExtLineConfProfTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineConfProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtLineConfProfTable'

Copy

The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.

xdsl2ExtLineConfProfEntry row .1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1

The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.

Indexes

VDSL2-LINE-MIBxdsl2LConfProfProfileName

Column	Syntax	OID
xdsl2LConfProfBitSwapDs This configuration parameter indicates if the use of bitswap is disabled on downstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.1
xdsl2LConfProfBitSwapUs This configuration parameter indicates if the use of bitswap is disabled on upstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.2
xdsl2LConfProfPortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.3
xdsl2LConfProfSosTimeDs The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value co…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.4
xdsl2LConfProfSosTimeUs The parameter SOS-TIME-u s is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value c…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.5
xdsl2LConfProfSosCrcDs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in th…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.6
xdsl2LConfProfSosCrcUs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in th…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.7
xdsl2LConfProfSosNToneDs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.8
xdsl2LConfProfSosNToneUs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.9
xdsl2LConfProfSosMaxDs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall t…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.10
xdsl2LConfProfSosMaxUs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall t…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.11
xdsl2LConfProfRocEnableDs Enable the robust overhead channel. disable(0), enable(1)	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.14
xdsl2LConfProfRocEnableUs Enable the robust overhead channel. disable(0), enable(1)	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.15
xdsl2LConfProfRocSnrmDs The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization policy (see 12.3.7.1/G.993.2). The valid ran…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.16
xdsl2LConfProfRocSnrmUs The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization policy (see 12.3.7.1/G.993.2). The valid ran…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.17
xdsl2LConfProfRocMinInpDs This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.18
xdsl2LConfProfRocMinInpUs This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.19
xdsl2LConfProfDynamicDepthDs This configuration parameter indicates if the use of Dynamic Depth is disabled on downstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.20
xdsl2LConfProfDynamicDepthUs This configuration parameter indicates if the use of Dynamic Depth is disabled on upstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.21

xdsl2ExtInmConfProfTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtInmConfProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtInmConfProfTable'

Copy

xdsl2ExtInmConfProfTable.

xdsl2ExtInmConfProfEntry row .1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1

xdsl2ExtInmConfProfTable.

Indexes

xdsl2ExtInmConfProfProfileName

Column	Syntax	OID
xdsl2ExtInmConfProfProfileName This object identifies a row in this table.	SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.1
xdsl2ExtInmConfProfVtucInpEq The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the ran…	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.2
xdsl2ExtInmConfProfVturInpEq The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the ran…	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.3
xdsl2ExtInmConfProfVtucCC The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be comp…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.4
xdsl2ExtInmConfProfVturCC The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be comp…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.5
xdsl2ExtInmConfProfVtucIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.6
xdsl2ExtInmConfProfVturIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.7
xdsl2ExtInmConfProfVtucIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.8
xdsl2ExtInmConfProfVturIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.9
xdsl2ExtInmConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.14
xdsl2ExtInmConfProfPortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.15

xdsl2ExtChConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1 · 1 row entry · 27 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtChConfProfileTable'

Copy

The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.

xdsl2ExtChConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1

The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2ChConfProfProfileName

Column	Syntax	OID
xdsl2ChConfProfPhyRDs This configuration parameter defines phy retransmission mode on downstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.1
xdsl2ChConfProfPhyRUs This configuration parameter defines phy retransmission mode on upstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current l…	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.2
xdsl2ChConfProfPortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.3
xdsl2ChConfProfGinpRtxModeDs G.inp(G.998.4) support setting on downstream direction. The possible values are: forbidden(0) - Support for G998.4 is disabled. preferred(1) - If G998.4 is supported by the far-end, it is enabled. forced(2) - The …	Xdsl2ConfigRtxModer/w Type Values: 0 forbidden 1 preferred 2 forced 3 test Description: forbidden(0) - Support for G998.4 is disabled. preferred(1) - If G998.4 is supported by the far-end, it is enabled. forced(2) - The line will only train if G998.4 can be enabled. test(3) - G998.4 is enabled in t…	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.4
xdsl2ChConfProfGinpRtxModeUs G.inp(G.998.4) support setting on upstream direction. The possible values are: forbidden(0) - Support for G998.4 is disabled. preferred(1) - If G998.4 is supported by the far-end, it is enabled. forced(2) - The li…	Xdsl2ConfigRtxModer/w Type Values: 0 forbidden 1 preferred 2 forced 3 test Description: forbidden(0) - Support for G998.4 is disabled. preferred(1) - If G998.4 is supported by the far-end, it is enabled. forced(2) - The line will only train if G998.4 can be enabled. test(3) - G998.4 is enabled in t…	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.5
xdsl2ChConfProfGinpEtrMaxDs Defines the maximum allowed value for the ETR (Effective Throughput Rate).	kbpsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.6
xdsl2ChConfProfGinpEtrMaxUs Defines the maximum allowed value for the ETR (Effective Throughput Rate).	kbpsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.7
xdsl2ChConfProfGinpEtrMinDs Defines the minimum value for the ETR (Effective Throughput Rate).	kbpsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.8
xdsl2ChConfProfGinpEtrMinUs Defines the minimum value for the ETR (Effective Throughput Rate).	kbpsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.9
xdsl2ChConfProfGinpNdrMaxDs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration	kbpsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.10
xdsl2ChConfProfGinpNdrMaxUs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration	kbpsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.11
xdsl2ChConfProfGinpShineRatioDs The loss of rate in a 1 second interval expressed as a fraction of NDR due to a SHINE impulse noise environment expected by the operator to occur at a probability acceptable for the services. The valid values are all …	0.001Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.12
xdsl2ChConfProfGinpShineRatioUs The loss of rate in a 1 second interval expressed as a fraction of NDR due to a SHINE impulse noise environment expected by the operator to occur at a probability acceptable for the services. The valid values are all …	0.001Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.13
xdsl2ChConfProfGinpLeftrThresholdDs The threshold used to declare leftr defects (see clause 11.3.3) expressed in fraction of the NDR. The value 0 is a special value to indicate that the receiver shall use a special value for declaring leftr defect . The…	0.01Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.14
xdsl2ChConfProfGinpLeftrThresholdUs The threshold used to declare leftr defects (see clause 11.3.3) expressed in fraction of the NDR. The value 0 is a special value to indicate that the receiver shall use a special value for declaring leftr defect . The…	0.01Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.15
xdsl2ChConfProfGinpMaxDelayDs The maximum allowed delay for retransmission.	msUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.16
xdsl2ChConfProfGinpMaxDelayUs The maximum allowed delay for retransmission.	msUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.17
xdsl2ChConfProfGinpMinDelayDs The minimum allowed delay for retransmission.	msUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.18
xdsl2ChConfProfGinpMinDelayUs The minimum allowed delay for retransmission.	msUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.19
xdsl2ChConfProfGinpInpMinDs Minimum impulse noise protection (INP) against SHINE in DMT symbols. The possible values are: 0-31	symbolsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.20
xdsl2ChConfProfGinpInpMinUs Minimum impulse noise protection (INP) against SHINE in DMT symbols. The possible values are: 0-31	symbolsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.21
xdsl2ChConfProfGinpReinCfgInpDs Minimum impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The possible values are: 0-7	symbolsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.22
xdsl2ChConfProfGinpReinCfgInpUs Minimum impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The possible values are: 0-7	symbolsUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.23
xdsl2ChConfProfGinpReinCfgFreqDs Configuration indicating the frequency of REIN. The possible values are: 100 - 100Hz 120 - 120Hz	HzUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.24
xdsl2ChConfProfGinpReinCfgFreqUs Configuration indicating the frequency of REIN. The possible values are: 100 - 100Hz 120 - 120Hz	HzUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.25
xdsl2ChConfProfSosMinRateB0Ds This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned integer representing the data rate as a multiple of 8 kbit/s.	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.26
xdsl2ChConfProfSosMinRateB0Us This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned integer representing the data rate as a multiple of 8 kbit/s.	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.27

xdsl2ExtLineAlarmConfTemplateTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.5.3.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineAlarmConfTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtLineAlarmConfTemplateTable'

Copy

The table xdsl2ExtLineAlarConfTemplateTable extends 
xdsl2ExtLineAlarConfTemplateTable.

xdsl2ExtLineAlarmConfTemplateEntry row .1.3.6.1.4.1.890.1.5.12.46.60.5.3.1.1

The table xdsl2ExtLineAlarConfTemplateTable extends
xdsl2ExtLineAlarConfTemplateTable.

Indexes

VDSL2-LINE-MIBxdsl2LAlarmConfTempTemplateName

Column	Syntax	OID
xdsl2LAlarmConfTempPortList A port list that indicates which ports this template applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.60.5.3.1.1.3

xdsl2ExtLineAlarmConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.5.3.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineAlarmConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtLineAlarmConfProfileTable'

Copy

The table xdsl2ExtLineAlarmConfProfileTable extends 
xdsl2LineAlarmConfProfileTable.

xdsl2ExtLineAlarmConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1

The table xdsl2ExtLineAlarmConfProfileTable extends
xdsl2LineAlarmConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2LineAlarmConfProfileName

Column	Syntax	OID
xdsl2LineAlarmConfProfileXtucThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.1
xdsl2LineAlarmConfProfileXturThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.2
xdsl2LAlarmConfProfilePortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.3
xdsl2LineAlarmConfProfileXturThresh15MinLprs A threshold for the xdsl2PMLCurr15MLprs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.4

xdsl2ExtChAlarmConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.60.5.3.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChAlarmConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::xdsl2ExtChAlarmConfProfileTable'

Copy

The table xdsl2ExtChAlarmConfProfileTable extends 
xdsl2ExtChAlarmConfProfileTable.

xdsl2ExtChAlarmConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.60.5.3.3.1

The table xdsl2ExtChAlarmConfProfileTable extends
xdsl2ExtChAlarmConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2ChAlarmConfProfileName

Column	Syntax	OID
xdsl2ChAlarmConfProfilePortList A port list that indicates which ports this profileapplys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.46.60.5.3.3.1.3

macBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.61.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::macBasedVlanTable'

Copy

macBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.46.61.1.1

An entry in macBasedVlanTable.

Indexes

macBasedVlanMAC

Column	Syntax	OID
macBasedVlanName Name of Mac-Based Vlan.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.61.1.1.1
macBasedVlanMAC Mac address for Mac-Based Vlan	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.61.1.1.2
macBasedVlanVlanId Vlan id for Mac-Based Vlan, 1~4094.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.61.1.1.3
macBasedVlan8021pPriority 802.1p priority for Mac-Based Vlan, 0~7.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.61.1.1.4
macBasedVlanRowstatus Row Status for Mac-Based Vlan	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.61.1.1.5

vlanProfileTable

table

.1.3.6.1.4.1.890.1.5.12.46.62.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanProfileTable'

Copy

vlanProfileEntry row .1.3.6.1.4.1.890.1.5.12.46.62.1.1

An entry in vlanProfileTable.

Indexes

vlanProfileName

Column	Syntax	OID
vlanProfileName Name of vlan Profile.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.62.1.1.1
vlanProfileMacLearning Mac learning for vlan profile	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.890.1.5.12.46.62.1.1.2
vlanProfileUnknownMulticastDrop Drop unknown multicast packets.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.890.1.5.12.46.62.1.1.3
vlanProfileRowStatus Row status for vlan profile	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.62.1.1.4

vlanTable

table

.1.3.6.1.4.1.890.1.5.12.46.62.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanTable'

Copy

vlanEntry row .1.3.6.1.4.1.890.1.5.12.46.62.2.1

An entry in vlanTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
profileName Name of vlan Profile.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.62.2.1.1

l2ptTable

table

.1.3.6.1.4.1.890.1.5.12.46.115.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk l2ptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::l2ptTable'

Copy

l2ptEntry row .1.3.6.1.4.1.890.1.5.12.46.115.3.1

An entry in l2ptTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
l2ptProtocolGroup L2PT protocols enabled/disabled on the port	Bitsr/w Enumerated Values: 0 cDP 1 sTP 2 vTP	.1.3.6.1.4.1.890.1.5.12.46.115.3.1.1
l2ptPointToPointProtocolGroup L2PT point-to-point protocols enabled/disabled on the port	Bitsr/w Enumerated Values: 0 pAGP 1 lACP 2 uDLD	.1.3.6.1.4.1.890.1.5.12.46.115.3.1.2
l2ptMode L2PT port role on the port	Enumerationr/w Enumerated Values: 1 access 2 tunnel	.1.3.6.1.4.1.890.1.5.12.46.115.3.1.3

vlanMappingPortTable

table

.1.3.6.1.4.1.890.1.5.12.46.116.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanMappingPortTable'

Copy

vlanMappingPortEntry row .1.3.6.1.4.1.890.1.5.12.46.116.2.1

An entry in vlanMappingPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vlanMappingPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.116.2.1.1
vlanMappingPortDropMiss	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.116.2.1.2

vlanMappingRuleTable

table

.1.3.6.1.4.1.890.1.5.12.46.116.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vlanMappingRuleTable'

Copy

vlanMappingRuleEntry row .1.3.6.1.4.1.890.1.5.12.46.116.3.1

An entry in vlan-mapping rule table

Indexes

vlanMappingRulePort vlanMappingRuleVid

Column	Syntax	OID
vlanMappingRuleName The name of vlan-mapping entry	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.116.3.1.1
vlanMappingRulePort interface port id	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.116.3.1.2
vlanMappingRuleVid inner vid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.116.3.1.3
vlanMappingRuleTransVid translated vid	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.116.3.1.4
vlanMappingRulePriority priority	Enumerationr/w Enumerated Values: 0 priority_0 1 priority_1 2 priority_2 3 priority_3 4 priority_4 5 priority_5 6 priority_6 7 priority_7	.1.3.6.1.4.1.890.1.5.12.46.116.3.1.5
vlanMappingRuleRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.116.3.1.6
vlanMappingRuleReplacePrio Replace Original Priority	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.116.3.1.7

transceiverSerialInfoTable

table

.1.3.6.1.4.1.890.1.5.12.46.117.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverSerialInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::transceiverSerialInfoTable'

Copy

transceiverSerialInfoEntry row .1.3.6.1.4.1.890.1.5.12.46.117.1.1

An entry in transceiverSerialInfoTable.

Indexes

transceiverSerialInfoEntryPort

Column	Syntax	OID
transceiverSerialInfoEntryPort Index of transceiverSerialInfo. It is referred to dot1dBasePort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.1
transceiverSerialInfoEntryStatus Transceiver module status.	Enumeration Enumerated Values: 1 ok_with_DDM 2 ok_without_DDM 3 nonoperational	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.2
transceiverSerialInfoEntryVendor Transceiver module vendor name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.3
transceiverSerialInfoEntryPartNo Part number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.4
transceiverSerialInfoEntrySerialNo Serial number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.5
transceiverSerialInfoEntryRevision Revision level for part number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.6
transceiverSerialInfoEntryDateCode Transceiver module vendor's manufacturing date code	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.7
transceiverSerialInfoEntryTransceiver Transceiver module type names	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.1.1.8

transceiverDdmInfoTable

table

.1.3.6.1.4.1.890.1.5.12.46.117.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverDdmInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::transceiverDdmInfoTable'

Copy

transceiverDdmInfoEntry row .1.3.6.1.4.1.890.1.5.12.46.117.2.1

An entry in transceiverDdmInfoTable.

Indexes

transceiverDdmInfoEntryPort transceiverDdmInfoEntryType

Column	Syntax	OID
transceiverDdmInfoEntryPort Index of transceiverDdmInfo. This will be referred to dot1dBasePort	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.1
transceiverDdmInfoEntryType Transceiver module status.	Enumeration Enumerated Values: 1 temperature 2 voltage 3 txbias 4 txPower 5 rxPower	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.2
transceiverDdmInfoEntryAlarmMax Default Transceiver high alarm threshold.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.3
transceiverDdmInfoEntryAlarmMin Default Transceiver low alarm threshold.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.4
transceiverDdmInfoEntryWarnMax Default Transceiver high warning threshold.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.5
transceiverDdmInfoEntryWarnMin Default Transceiver low warning threshold.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.6
transceiverDdmInfoEntryCurrent Transceiver current value.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.7
transceiverDdmInfoEntryDescription Transceiver module type names	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.117.2.1.8

layer2StatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.1.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk layer2StatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::layer2StatusTable'

Copy

layer2StatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.1.1.1

An entry in layer2Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturIgmpSnoopingStatus	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.118.1.1.1.2
vturUnknownMulticastStatus	Enumeration Enumerated Values: 1 block 2 forward	.1.3.6.1.4.1.890.1.5.12.46.118.1.1.1.4

portStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.2.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::portStatusTable'

Copy

portStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.2.1.1

An entry in portTable.

Indexes

BRIDGE-MIBdot1dBasePort portStatusNumber

Column	Syntax	OID
portStatusNumber Display all ports we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.2.1.1.1
portStatusOperStatus CPE port's current status.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.118.2.1.1.3
portStatusOperSpeed CPE port's current speed.	Enumeration Enumerated Values: 0 linkdown 1 autoneg 2 half_10M 3 full_10M 4 half_100M 5 full_100M	.1.3.6.1.4.1.890.1.5.12.46.118.2.1.1.8

vturWanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturWanStatusTable'

Copy

vturWanStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1

An entry in vturWanTable.

Indexes

BRIDGE-MIBdot1dBasePort vturWanStatusIndex

Column	Syntax	OID
vturWanStatusIndex Display the wan index range from 1 to 4 we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.1
vturWanStatusVlanTagging Display the vlan tagging we got in CPE side	Enumeration Enumerated Values: 1 disable 2 vlan_mux 3 auto_vlan	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.2
vturWanStatusVlanID Display the vlan id range from 1 to 4094 we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.3
vturWanStatus8021p Display the 802.1p value range from 0 to 7 we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.4
vturWanStatusPPPUsername Display the PPP username we got in CPE side	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.5
vturWanStatusPPPPassword Display the PPP password we got in CPE side	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.6
vturWanStatusProtocol Display the wan protocol info we got in CPE side	Enumeration Enumerated Values: 1 pppoe 2 mer 3 bridge	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.7
vturWanStatusProtocolSetting Display the wan service enable/disable status we got in CPE side	Bits Enumerated Values: 0 dhcp_client_ 1 nat 2 firewall 3 igmp	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.8
vturWanStatusIP Display the wan IP setting we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.9
vturWanStatusSubnetMask Display the wan subnet mask we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.10
vturWanStatusService Display the wan service enable/disable status we got in CPE side	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.11

vturWanStatusCommonTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.4.2.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanStatusCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturWanStatusCommonTable'

Copy

vturWanStatusCommonEntry row .1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1

An entry in vturWanCommonTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturWanStatusCommonQoS	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.1
vturWanStatusCommonEnableAutoDefaultGateway Display the enable auto default gateay setting we get from CPE side	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.2
vturWanStatusCommonDefaultGatewayIP Display the default gateway setting we get from CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.3
vturWanStatusCommonVitualPortEnable Display Enable/Disable virtual port on eth1 setting we get on CPE side	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.4

vturClassificationStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.5.1 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturClassificationStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturClassificationStatusTable'

Copy

vturClassificationStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.5.1.1

An entry in vturClassificationTable.

Indexes

BRIDGE-MIBdot1dBasePort vturClassificationStatusIndex

Column	Syntax	OID
vturClassificationStatusIndex Display the classification index range from 1 to 8 we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.1
vturClassificationStatusRuleEnable Display the classification enable/disable status we got in CPE side	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.2
vturClassificationStatusWanInterface Display the wan interface index range from 1 to 4 we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.3
vturClassificationStatusQueue Display the assigned queue (1-4)802.1p value we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.4
vturClassificationStatus8021p Mark 802.1p if 802.1q is enabled [0-7]	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.5
vturClassificationStatusVid Display the 802.1Q VLAN ID: [1-4094]	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.6
vturClassificationStatusFilterPhysicalPort Physical LAN Port number	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.7
vturClassificationStatusFilterProtocol Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4	Enumeration Enumerated Values: 1 tcp_udp 2 tcp 3 udp 4 icmp	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.8
vturClassificationStatusFilterSourceIP Display the filtering source IP we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.9
vturClassificationStatusFilterSourceSubnetMask Display the filtering source subnet mask we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.10
vturClassificationStatusFilterDestinationIP Display the filtering destination IP we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.11
vturClassificationStatusFilterDestinationSubnetMask Display the filtering destination subnet mask we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.12
vturClassificationStatusFilterSourcePortStart Display the filtering source port start we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.13
vturClassificationStatusFilterSourcePortEnd Display the filtering source port end we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.14
vturClassificationStatusFilterDestinationPortStart Display the filtering destination port start we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.15
vturClassificationStatusFilterDestinationPortEnd Display the filtering destination end port we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.16
vturClassificationStatusFilterSourceMACAddr Display the filtering source MAC addr we got in CPE side	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.17
vturClassificationStatusFilterSourceMACMask Display the filtering source MAC mask we got in CPE side	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.18
vturClassificationStatusFilterDestinationMACAddr Display the filtering destination MAC addr we got in CPE side	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.19
vturClassificationStatusFilterDestinationMACMask Display the filtering destination MAC mask we got in CPE side	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.20
vturClassificationStatusFilter8021p Display the filtering 802.1p value we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.21
vturClassificationStatusFilterProtocolType Display the filtering protocol type we got in CPE side	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.22
vturClassificationStatusPolicyGatewayIP Display the filtering protocol type we got in CPE side	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.23

vturAPGeneralStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPGeneralStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPGeneralStatusTable'

Copy

vturAPGeneralStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1

An entry in VTUR AP General Statistics Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturLanRxBytes Received bytes on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.1
vturLanRxPkts Received frames on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.2
vturLanTxBytes Transmitted bytes on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.3
vturLanTxPkts Transmitted frames on LAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.4
vturVdslRxBytes Received bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.5
vturVdslRxPkts Received frames on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.6
vturVdslTxBytes Transmitted bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.7
vturVdslTxPkts Transmitted frames on VDSL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.8
vturWlanRxBytes Received bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.9
vturWlanRxPkts Received frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.10
vturWlanRxErrs Received error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.11
vturWlanRxDrops Received drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.12
vturWlanTxBytes Transmitted bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.13
vturWlanTxPkts Transmitted frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.14
vturWlanTxErrs Transmitted error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.15
vturWlanTxDrops Transmitted drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.16

vturAPPerSSIDStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPPerSSIDStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPPerSSIDStatusTable'

Copy

vturAPPerSSIDStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1

An entry in VTUR AP Per-SSID Statistics Table.

Indexes

BRIDGE-MIBdot1dBasePort vturWlanPerSSIDStatusIndex

Column	Syntax	OID
vturWlanPerSSIDStatusIndex Index of vturAPPerSSIDStatusTable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.1
vturWlanPerSSIDStatusSSID WLAN SSID	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.2
vturWlanPerSSIDRxBytes Received bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.3
vturWlanPerSSIDRxPkts Received frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.4
vturWlanPerSSIDRxErrs Received error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.5
vturWlanPerSSIDRxDrops Received drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.6
vturWlanPerSSIDTxBytes Transmitted bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.7
vturWlanPerSSIDTxPkts Transmitted frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.8
vturWlanPerSSIDTxErrs Transmitted error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.9
vturWlanPerSSIDTxDrops Transmitted drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.10

vturAPWlanStatusBasicTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusBasicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatusBasicTable'

Copy

vturAPWlanStatusBasicEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1

An entry in VTUR AP Wlan Basic Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturWlanEnable Display the current WLAN status 0:Disable WLAN 1:Enable WLAN	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.1
vturWlanSsid SSID of the AP	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.2
vturWlanBssid Mac address of AP	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.3
vturWlanHidden Display the current AP's SSID status 0: not hide AP's SSID 1: hide AP's SSID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.4
vturWlanChannel Channel number of the AP	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.5
vturWlanMode Display the current AP's mode 1: B or G mix mode 2: Pure G mode 3: Pure B mode	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.6
vturWlanTxPower Display the current Transmit power 1: 30 mW 2: 15 mW	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.7
vturWlanMulticastRate Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps 0: auto 2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode 12, 18, 24, 36, 48, 96, 108: Transmit rate = 6…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.8

vturAPWlanStatusSecurityTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatusSecurityTable'

Copy

vturAPWlanStatusSecurityEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturWlanSecurityMode Display the current Security Mode 1: No security 2: Static WEP 3: WPA-PSK 4: WPA 5: WPA2 6: WPA2-PSK	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.1
vturWlanWepEncryp This field is for SecurityMode = static WEP. 1: 64-Bit 2: 128-Bit	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.2
vturWlanKeyId This field is for SecurityMode = static WEP. It indicate which key will be used for encryption. If KeyId is equal to 1, AP will use Key1 to encrypt frame.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.3
vturWlanKey1 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key1 will be 10 heximal digits. If WEPEncryp is 128-Bit, key1 will be 26 heximal digits.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.4
vturWlanKey2 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key2 will be 10 heximal digits. If WEPEncryp is 128-Bit, key2 will be 26 heximal digits.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.5
vturWlanKey3 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key3 will be 10 heximal digits. If WEPEncryp is 128-Bit, key3 will be 26 heximal digits.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.6
vturWlanKey4 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key4 will be 10 heximal digits. If WEPEncryp is 128-Bit, key4 will be 26 heximal digits.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.7
vturWlanPsk This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.8
vturWlanWpaMix This field is for SecurityMode = WPA2 or WPA2-PSK. When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP. When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP co…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.9
vturWlanReAuthTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger re-authentication with station every [ReAuthTime] seconds.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.10
vturWlanIdleTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will flush station??s information if there are no packets from station for [idleTime] seconds.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.11
vturWlanGtkTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger the update of group key with station every [GTKTime] seconds.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.12

vturAPWlanStatusRadiusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusRadiusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatusRadiusTable'

Copy

vturAPWlanStatusRadiusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturWlanAuthServIP This field is the IP address of authentication server.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.1
vturWlanAuthServPort This field is the port number of authentication server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.2
vturWlanAuthServSecret This field is the shared secret of authentication server.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.3
vturWlanAccServActive This field is for activating or inactivating accounting server. 0: inactivate accounting server. 1: activate accounting server	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.4
vturWlanAccServIP This field is the IP address of accounting server.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.5
vturWlanAccServPort This field is the port number of accounting server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.6
vturWlanAccServSecret This field is the shared secret of accounting server.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.7

vturAPWlanStatusMacFilterTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusMacFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatusMacFilterTable'

Copy

vturAPWlanStatusMacFilterEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1.1

An entry in VTUR AP Wlan Mac Filter Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturWlanMacFltActive Activate or inactivate wlan MAC filter. 0: Inactive 1: Active	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1.1.1
vturWlanMacFltAction 0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8. 1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1.1.2

vturAPWlanStatusMacFltAddrTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusMacFltAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatusMacFltAddrTable'

Copy

vturAPWlanStatusMacFltAddrEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort fltStaIndex

Column	Syntax	OID
vturWlanFltStaIndex The index for Mac filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2.1.1
vturWlanMacFltAddr The address for Mac filter	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2.1.2

vturAPWlanStatusStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatusStatisticsTable'

Copy

vturAPWlanStatusStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturWlanInPkts Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.1
vturWlanInOctets Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.2
vturWlanInUCasts Received unicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.3
vturWlanInMCasts Received multicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.4
vturWlanRxFCSErrors Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.5
vturWlanOutPkts Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.6
vturWlanOutOctets Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.7
vturWlanOutUCasts Transmitted unicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.8
vturWlanOutMCasts Transmitted multicast frames	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.9

vturAPWlanStatusStaListTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.7.2.6 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusStaListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturAPWlanStatusStaListTable'

Copy

vturAPWlanStatusStaListEntry row .1.3.6.1.4.1.890.1.5.12.46.118.7.2.6.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort staIndex

Column	Syntax	OID
vturWlanStaIndex The index of associated WLAN STA. Max = 32, Min = 1	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.6.1.1
vturWlanStaMacAddr The address of associated WLAN STA	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.118.7.2.6.1.2

vturConsoleStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.8.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturConsoleStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturConsoleStatusTable'

Copy

vturConsoleStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.8.1.1

An entry in vturConsoleTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturConsoleStatusState Display the current Console status 1: Enable console 2: Disable console	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.118.8.1.1.1
vturConsoleStatusAdminPassword The operation for vtur device admin password	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.8.1.1.2
vturConsoleStatusUserPassword The operation for vtur device user password	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.8.1.1.3

remoteFunctionStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.9.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk remoteFunctionStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::remoteFunctionStatusTable'

Copy

remoteFunctionStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.9.1.1

An entry in RemoteFunctionTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
telnetStatus Display the current Telnet status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only	Enumeration Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.3
tftpStatus Display the current TFTP status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only	Enumeration Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.4
webStatus Display the current Web status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only	Enumeration Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.5
snmpStatus Display the current SNMP status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only	Enumeration Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.6
sshStatus Display the current SSH status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only	Enumeration Enumerated Values: 1 enable_all 2 disable_all 3 enable_lan_only 4 enable_wan_only	.1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.7
wirelessStatus Display the current Wireless status 1: Disable 2: Enable	Enumeration Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.8

vturMacAddrTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.10.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturMacAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturMacAddrTable'

Copy

vturMacAddrEntry row .1.3.6.1.4.1.890.1.5.12.46.118.10.1.1

An entry in vturMacAddrTable.

Indexes

BRIDGE-MIBdot1dBasePort vturMacAddrIndex

Column	Syntax	OID
vturMacAddrIndex The index of associated vtur STA. Max = 32, Min = 1	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.10.1.1.1
vturMacAddress The address of associated vtur STA	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.46.118.10.1.1.2

vturLanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.11.1 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturLanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturLanStatusTable'

Copy

vturLanStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.11.1.1

An entry in vturLanTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturLanStatusIP	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.1
vturLanStatusSubnetmask	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.2
vturLanStatusDHCPOption	Enumeration Enumerated Values: 1 disable_dhcp_server 2 enable_dhcp_server 3 dhcp_server_relay	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.3
vturLanStatusDHCPServerStartIPAddr	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.4
vturLanStatusDHCPServerEndIPAddr	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.5
vturLanStatusDHCPServerSubnetmask	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.6
vturLanStatusDHCPServerIPAddr	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.7
vturLanStatusEthPort Display the current vtur LAN port to be isolated. From LAN1 to LAN4.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.8
vturLanStatusEthPortIsolate Display the current vtur LAN port isolated-enable or isolated-disable.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.9

vturCFMStatusTable

table

.1.3.6.1.4.1.890.1.5.12.46.118.12.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturCFMStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::vturCFMStatusTable'

Copy

vturCFMStatusEntry row .1.3.6.1.4.1.890.1.5.12.46.118.12.1.1

An entry in vturCFMTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturCFMStatusMdName	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.2
vturCFMStatusMaName	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.3
vturCFMStatusVid	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.4
vturCFMStatusMepId	IEEE8021-CFM-MIBDot1agCfmMepId Type Constraints: range: 1..8191	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.5
vturCFMStatusMdLevel	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.6
vturCFMStatusDestMAC	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.8
vturCFMStatusLBMCount	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.9
vturCFMStatusResultSentLBM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.10
vturCFMStatusResultInorderLBM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.11
vturCFMStatusResultOutorderLBM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.12
vturCFMStatusMACAddr CPE MAC address	OctetString	.1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.13

pppoeIATable

table

.1.3.6.1.4.1.890.1.5.12.46.119.2.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeIATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::pppoeIATable'

Copy

pppoeIAEntry row .1.3.6.1.4.1.890.1.5.12.46.119.2.2.1

An entry in pppoeIATable.

Indexes

pppoeIAVID

Column	Syntax	OID
pppoeIAVID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.1
pppoeIACircuitIDInfoEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.2
pppoeIACircuitIDInfoData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.3
pppoeIARemoteIDEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.4
pppoeIARemoteIDData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.5
pppoeIARowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.6
pppoeIARemoteIDType <1:port | 2:system>	Enumerationr/w Enumerated Values: 1 port 2 system	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.7
pppoeIACircuitIDType <1:hostname | 2:system>	Enumerationr/w Enumerated Values: 1 hostname 2 system	.1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.8

macFlushTable

table

.1.3.6.1.4.1.890.1.5.12.46.122.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macFlushTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::macFlushTable'

Copy

macFlushEntry row .1.3.6.1.4.1.890.1.5.12.46.122.1.1

An entry in macFlushTable.

Indexes

macFlushPortIndex

Column	Syntax	OID
macFlushPortIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.122.1.1.1
macFlushPortConfig Set 1 to execute mac flush operation in the specified port, read value will always return 0	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.122.1.1.2

sfpThresholdTable

table

.1.3.6.1.4.1.890.1.5.12.46.123.2 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sfpThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-MIB::sfpThresholdTable'

Copy

sfpThresholdUserInputEntry row .1.3.6.1.4.1.890.1.5.12.46.123.2.1

An entry in sfpThresholdTable.

Indexes

sfpPortIndex

Column	Syntax	OID
sfpPortIndex sfp port index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.1
sfpTempHighAlarmThresh User defined high alarm threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.2
sfpTempHighWarnThresh User defined high warning threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.3
sfpTempLowWarnThresh User defined low warning threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.4
sfpTempLowAlarmThresh User defined low alarm threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.5
sfpVoltageHighAlarmThresh User defined high alarm threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.6
sfpVoltageHighWarnThresh User defined high warning threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.7
sfpVoltageLowWarnThresh User defined low warning threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.8
sfpVoltageLowAlarmThresh User defined low alarm threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.9
sfpTxBiasHighAlarmThresh User defined high alarm threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.10
sfpTxBiasHighWarnThresh User defined high warning threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.11
sfpTxBiasLowWarnThresh User defined low warning threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.12
sfpTxBiasLowAlarmThresh User defined low alarm threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.13
sfpTxPowerHighAlarmThresh User defined high alarm threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.14
sfpTxPowerHighWarnThresh User defined high warning threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.15
sfpTxPowerLowWarnThresh User defined low warning threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.16
sfpTxPowerLowAlarmThresh User defined low alarm threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.17
sfpRxPowerHighAlarmThresh User defined high alarm threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.18
sfpRxPowerHighWarnThresh User defined high warning threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.19
sfpRxPowerLowWarnThresh User defined low warning threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.20
sfpRxPowerLowAlarmThresh User defined low alarm threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.46.123.2.1.21