ZYXEL-ves1724-56-Fanless-MIB Table View

Column Syntax OID

brLimitPortBrState

Broadcast rate limiting enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.3.2.1.1

brLimitPortBrRate

Allowed broadcast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.3.2.1.2

brLimitPortMcState

Multicast rate limiting enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.3.2.1.3

brLimitPortMcRate

AAllowed mullticast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.3.2.1.4

brLimitPortDlfState

Destination lookup failure frames rate limiting enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.3.2.1.5

brLimitPortDlfRate

Allowed destination lookup failure frames rate in pkts/s.
For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.3.2.1.6

portSecurityPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.4.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portSecurityPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portSecurityPortTable'

portSecurityPortEntry row .1.3.6.1.4.1.890.1.5.12.47.4.2.1

An entry in portSecurityPortTable.

Indexes

Column Syntax OID

portSecurityPortState

Port Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSecur…

portSecurityPortLearnState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.4.2.1.1

MAC address learning enabled/disable on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.4.2.1.2

portSecurityPortCount

Number of (dynamic) MAC addresses that may be learned on the port.

portSecurityPortMacSpoofing

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.4.2.1.3

Enable/Disable MAC spoofing.
When enable, the port would not relearn MAC which has existed on L2 table.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.4.2.1.4

vlanTrunkPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.5.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanTrunkPortTable'

vlanTrunkPortEntry row .1.3.6.1.4.1.890.1.5.12.47.5.1.1

An entry in vlanTrunkPortTable.

Indexes

Column Syntax OID

vlanTrunkPortState

VlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.5.1.1.1

ctlProtTransTunnelPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.6.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ctlProtTransTunnelPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::ctlProtTransTunnelPortTable'

ctlProtTransTunnelPortEntry row .1.3.6.1.4.1.890.1.5.12.47.6.2.1

An entry in ctlProtTransTunnelPortTable.

Indexes

Column Syntax OID

ctlProtTransTunnelMode

Bridge control protocol transparency mode for the port.
Modes: Peer(0), Tunnel(1), Discard(2), Network(3)

Enumerationr/w

Enumerated Values:

0	peer
1	tunnel
2	discard
3	network

.1.3.6.1.4.1.890.1.5.12.47.6.2.1.1

vlanStackPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.7.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanStackPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanStackPortTable'

vlanStackPortEntry row .1.3.6.1.4.1.890.1.5.12.47.7.3.1

An entry in vlanStackPortTable.

Indexes

Column Syntax OID

vlanStackPortMode

Mode of the port. Set Normal to have the switch ignore frames received
(or transmitted) on this port with VLAN stacking tags.
Anything you configure in SPVID and Priority are ignored.
Set Access mode to have the swit…

Enumerationr/w

Enumerated Values:

1	normal
2	access
3	tunnel

.1.3.6.1.4.1.890.1.5.12.47.7.3.1.1

vlanStackPortVid

VLAN ID used in service provider tag.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.7.3.1.2

vlanStackPortPrio

Priority value for service provider tag.
0 is the lowest priority level and 7 is the highest.

Enumerationr/w

Enumerated Values:

0	priority_0
1	priority_1
2	priority_2
3	priority_3
4	priority_4
5	priority_5
6	priority_6
7	priority_7

.1.3.6.1.4.1.890.1.5.12.47.7.3.1.3

vlanStackTunnelPortTpid

Tunnel Port TPID in hex format, e.g. 8100.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.7.3.1.4

vlanStackPCopyCtagPrio

selectiveQinQPort selectiveQinQCvid

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.7.3.1.5

selectiveQinQTable

table

.1.3.6.1.4.1.890.1.5.12.47.7.4 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk selectiveQinQTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::selectiveQinQTable'

selectiveQinQEntry row .1.3.6.1.4.1.890.1.5.12.47.7.4.1

An entry in selective qinq table

Indexes

Column Syntax OID

selectiveQinQName

The name of selective qinq entry

.1.3.6.1.4.1.890.1.5.12.47.7.4.1.1

selectiveQinQPort

interface port id

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.7.4.1.2

selectiveQinQCvid

inner vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.7.4.1.3

selectiveQinQSpvid

outer vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.7.4.1.4

selectiveQinQPriority

priority

Enumerationr/w

Enumerated Values:

0	priority_0
1	priority_1
2	priority_2
3	priority_3
4	priority_4
5	priority_5
6	priority_6
7	priority_7

.1.3.6.1.4.1.890.1.5.12.47.7.4.1.5

selectiveQinQRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.890.1.5.12.47.7.4.1.6

selectiveQinQACtivePrio

Use the value for priority for Stag

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.7.4.1.7

portBasedInnerQTable

table

.1.3.6.1.4.1.890.1.5.12.47.7.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedInnerQTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portBasedInnerQTable'

portBasedInnerQEntry row .1.3.6.1.4.1.890.1.5.12.47.7.5.1

An entry in PortBasedInnerQTable.

Indexes

Column Syntax OID

portBasedInnerQVid

VLAN ID used in inner tag.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.7.5.1.1

portBasedInnerQPrio

Priority value for inner tag.
0 is the lowest priority level and 7 is the highest.

Enumerationr/w

Enumerated Values:

0	priority_0
1	priority_1
2	priority_2
3	priority_3
4	priority_4
5	priority_5
6	priority_6
7	priority_7

.1.3.6.1.4.1.890.1.5.12.47.7.5.1.2

portBasedInnerQActive

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.7.5.1.3

portBasedInnerQTxUntag

Tx without Ctag (Only active when innerQ is enable)

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.7.5.1.4

portAuthTable

table

.1.3.6.1.4.1.890.1.5.12.47.8.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portAuthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portAuthTable'

portAuthEntry row .1.3.6.1.4.1.890.1.5.12.47.8.4.1

An entry in portAuthTable.

Indexes

Column Syntax OID

portAuthEntryState

802.1x port authentication enabled or disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.8.4.1.1

portReAuthEntryState

802.1x port re-authentication enabled or disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.8.4.1.2

portReAuthEntryTimer

Re-authentication timer in seconds.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.8.4.1.3

fanRpmTable

table

.1.3.6.1.4.1.890.1.5.12.47.9.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fanRpmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::fanRpmTable'

fanRpmEntry row .1.3.6.1.4.1.890.1.5.12.47.9.1.1

An entry in fanRpmTable.

Indexes

fanRpmIndex

Column	Syntax	OID
fanRpmIndex Index of FAN.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.9.1.1.1`
fanRpmCurValue Current speed in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.9.1.1.2`
fanRpmMaxValue Maximum speed measured in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.9.1.1.3`
fanRpmMinValue Minimum speed measured in Revolutions Per Minute (RPM) on the fan.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.9.1.1.4`
fanRpmLowThresh The minimum speed at which a normal fan should work.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.9.1.1.5`
fanRpmDescr 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.9.1.1.6`

tempTable

table

.1.3.6.1.4.1.890.1.5.12.47.9.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tempTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::tempTable'

tempEntry row .1.3.6.1.4.1.890.1.5.12.47.9.2.1

An entry in tempTable.

Indexes

tempIndex

Column Syntax OID

tempIndex

Index of temperature unit. 1:MAC, 2:CPU, 3:PHY

Enumeration

Enumerated Values:

1	mac
2	cpu
3	phy

.1.3.6.1.4.1.890.1.5.12.47.9.2.1.1

tempCurValue

The current temperature measured at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.2.1.2

tempMaxValue

The maximum temperature measured at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.2.1.3

tempMinValue

The minimum temperature measured at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.2.1.4

tempHighThresh

The upper temperature limit at this sensor.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.2.1.5

tempDescr

'Normal' indicates temperatures below the threshold and 'Error' for those above.

.1.3.6.1.4.1.890.1.5.12.47.9.2.1.6

voltageTable

table

.1.3.6.1.4.1.890.1.5.12.47.9.3 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voltageTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::voltageTable'

voltageEntry row .1.3.6.1.4.1.890.1.5.12.47.9.3.1

An entry in voltageTable.

Indexes

voltageIndex

Column Syntax OID

voltageIndex

Index of voltage. (1) 14VIN (2) 2.5VS (3) CPU/DSP/AFE

Enumeration

Enumerated Values:

1	vin14
2	vs2_5
3	cpu_dsp_afe

.1.3.6.1.4.1.890.1.5.12.47.9.3.1.1

voltageCurValue

The current voltage reading.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.3.1.2

voltageMaxValue

The maximum voltage measured at this point.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.3.1.3

voltageMinValue

The minimum voltage measured at this point.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.3.1.4

voltageNominalValue

The normal voltage at wchich the switch work.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.3.1.5

voltageLowThresh

The minimum voltage at which the switch should work.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.9.3.1.6

voltageDescr

'Normal' indicates that the voltage is within an acceptable operating range
at this point; otherwise 'Error' is displayed.

.1.3.6.1.4.1.890.1.5.12.47.9.3.1.7

snmpTrapDestTable

table

.1.3.6.1.4.1.890.1.5.12.47.10.4 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::snmpTrapDestTable'

snmpTrapDestEntry row .1.3.6.1.4.1.890.1.5.12.47.10.4.1

An entry in snmpTrapDestTable.

Indexes

snmpTrapDestIP

Column Syntax OID

snmpTrapDestIP

IP address of trap destination.

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.10.4.1.1

snmpTrapDestRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.10.4.1.2

snmpTrapDestPort

The UDP port of the trap destination.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.10.4.1.3

snmpTrapVersion

The SNMP protocol version to send traps.

Enumerationr/w

Enumerated Values:

0	v1
1	v2c
2	v3

.1.3.6.1.4.1.890.1.5.12.47.10.4.1.4

snmpTrapUserName

The user name for sending SNMPv3 traps.

.1.3.6.1.4.1.890.1.5.12.47.10.4.1.5

snmpTrapGroupTable

table

.1.3.6.1.4.1.890.1.5.12.47.10.5 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::snmpTrapGroupTable'

snmpTrapGroupEntry row .1.3.6.1.4.1.890.1.5.12.47.10.5.1

An entry in snmpTrapGroupTable.

Indexes

snmpTrapDestIP

Column Syntax OID

snmpTrapSystemGroup

Bitsr/w

Enumerated Values:

0	coldStart
1	warmStart
3	temperature
4	voltage
5	reset
7	externalalarm
9	loopguard
10	lpr
11	hwInformation
16	rxcrc
17	errdisable

.1.3.6.1.4.1.890.1.5.12.47.10.5.1.1

snmpTrapInterfaceGroup

Bitsr/w

Enumerated Values:

0	linkup
1	linkdown
2	autonegotiation
4	sfp

.1.3.6.1.4.1.890.1.5.12.47.10.5.1.2

snmpTrapAAAGroup

Bitsr/w

Enumerated Values:

0	authentication
1	accounting

.1.3.6.1.4.1.890.1.5.12.47.10.5.1.3

snmpTrapSwitchGroup

Bitsr/w

Enumerated Values:

0	stp
1	mactable
2	rmon

.1.3.6.1.4.1.890.1.5.12.47.10.5.1.5

snmpTrapVdslGroup

Bitsr/w

Enumerated Values:

0	alarmprofile
1	others

.1.3.6.1.4.1.890.1.5.12.47.10.5.1.6

snmpUserTable

table

.1.3.6.1.4.1.890.1.5.12.47.10.7 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::snmpUserTable'

A table that contains SNMPv3 user information.

snmpUserEntry row .1.3.6.1.4.1.890.1.5.12.47.10.7.1

An entry of snmpUserTable.

Indexes

snmpUserName

Column Syntax OID

snmpUserName

The user name.

snmpTrapDestInfoIpAddrType snmpTrapDestInfoIpAddr

.1.3.6.1.4.1.890.1.5.12.47.10.7.1.1

snmpUserSecurityLevel

The level of security at which SNMP messages can be sent or
with which operations are being processed.

Enumerationr/w

Enumerated Values:

0	noAuthNoPriv
1	authNoPriv
2	authPriv

.1.3.6.1.4.1.890.1.5.12.47.10.7.1.2

snmpUserAuthProtocol

The type of authentication protocol to be used.

Enumerationr/w

Enumerated Values:

0	md5
1	sha

.1.3.6.1.4.1.890.1.5.12.47.10.7.1.3

snmpUserPrivProtocol

The type of privacy protocol to be used.

Enumerationr/w

Enumerated Values:

0	des
1	aes

.1.3.6.1.4.1.890.1.5.12.47.10.7.1.4

snmpTrapDestInfoTable

table

.1.3.6.1.4.1.890.1.5.12.47.10.8 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::snmpTrapDestInfoTable'

snmpTrapDestInfoEntry row .1.3.6.1.4.1.890.1.5.12.47.10.8.1

An entry in snmpTrapDestInfoTable.

Indexes

Column Syntax OID

snmpTrapDestInfoIpAddrType

IP address of trap destination.

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.10.8.1.1

snmpTrapDestInfoIpAddr

IP address of trap destination.

snmpTrapDestInfoRowStatus

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.10.8.1.2

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.10.8.1.3

snmpTrapDestInfoPort

The UDP port of the trap destination.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.10.8.1.4

snmpTrapDestInfoVersion

The SNMP protocol version to send traps.

Enumerationr/w

Enumerated Values:

0	v1
1	v2c
2	v3

.1.3.6.1.4.1.890.1.5.12.47.10.8.1.5

snmpTrapDestInfoUserName

The user name for sending SNMPv3 traps.

snmpTrapDestInfoIpAddrType snmpTrapDestInfoIpAddr

.1.3.6.1.4.1.890.1.5.12.47.10.8.1.6

snmpTrapGroupInfoTable

table

.1.3.6.1.4.1.890.1.5.12.47.10.9 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::snmpTrapGroupInfoTable'

snmpTrapGroupInfoEntry row .1.3.6.1.4.1.890.1.5.12.47.10.9.1

An entry in snmpTrapGroupInfoTable.

Indexes

Column Syntax OID

snmpTrapGroupInfoSystemGroup

Bitsr/w

Enumerated Values:

0	coldStart
1	warmStart
3	temperature
4	voltage
5	reset
7	externalalarm
9	loopguard
10	lpr
11	hwInformation
16	rxcrc
17	errdisable

.1.3.6.1.4.1.890.1.5.12.47.10.9.1.1

snmpTrapGroupInfoInterfaceGroup

Bitsr/w

Enumerated Values:

0	linkup
1	linkdown
2	autonegotiation
4	sfp

.1.3.6.1.4.1.890.1.5.12.47.10.9.1.2

snmpTrapGroupInfoAAAGroup

Bitsr/w

Enumerated Values:

0	authentication
1	accounting

.1.3.6.1.4.1.890.1.5.12.47.10.9.1.3

snmpTrapGroupInfoSwitchGroup

Bitsr/w

Enumerated Values:

0	stp
1	mactable
2	rmon

.1.3.6.1.4.1.890.1.5.12.47.10.9.1.5

snmpTrapGroupInfoVdslGroup

Bitsr/w

Enumerated Values:

0	alarmprofile
1	others

.1.3.6.1.4.1.890.1.5.12.47.10.9.1.6

rmtFwUpgradeStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.12.11.3.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rmtFwUpgradeStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::rmtFwUpgradeStatusTable'

rmtFwUpgradeStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.12.11.3.1.1

An entry in rmtFwUpgradeStatusTable.

Indexes

Column Syntax OID

rmtFwUpgradeStatus

Enumeration

Enumerated Values:

1	idle
2	upgrading
3	success
4	fail

.1.3.6.1.4.1.890.1.5.12.47.12.11.3.1.1.1

rmtFwStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.12.11.4.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rmtFwStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::rmtFwStatusTable'

rmtFwStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.12.11.4.3.1

An entry in rmtFwStatusTable.

Indexes

Column	Syntax	OID
rmtFwStatus	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.12.11.4.3.1.1`

sysLoginSetupTable

table

.1.3.6.1.4.1.890.1.5.12.47.12.14.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLoginSetupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::sysLoginSetupTable'

sysLoginSetupEntry row .1.3.6.1.4.1.890.1.5.12.47.12.14.2.1

An entry in LoginLimitMaxNumberOfUser.

Indexes

sysLoginName

Column Syntax OID

sysLoginName

.1.3.6.1.4.1.890.1.5.12.47.12.14.2.1.1

sysLoginPassword

.1.3.6.1.4.1.890.1.5.12.47.12.14.2.1.2

sysLoginPrivilege

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.12.14.2.1.3

sysLoginRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.12.14.2.1.4

externalAlarmTable

table

.1.3.6.1.4.1.890.1.5.12.47.12.15.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk externalAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::externalAlarmTable'

externalAlarmEntry row .1.3.6.1.4.1.890.1.5.12.47.12.15.1.1

An entry in externalAlarmTable.

Indexes

externalAlarmIndex

Column Syntax OID

externalAlarmIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.12.15.1.1.1

externalAlarmSwitch

externalalarm switch on/off

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.12.15.1.1.2

externalAlarmName

externalalarm name setting

.1.3.6.1.4.1.890.1.5.12.47.12.15.1.1.3

monitorItemTable

table

.1.3.6.1.4.1.890.1.5.12.47.12.21.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk monitorItemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::monitorItemTable'

monitorItemEntry row .1.3.6.1.4.1.890.1.5.12.47.12.21.1.1

An entry in monitorItemTable.

Indexes

monitorItemIndex

Column	Syntax	OID
monitorItemIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.12.21.1.1.1`
monitorItemName Name of Monitor Item	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.12.21.1.1.2`
monitorItemThreshold Monitor Item Threshold. The value of High temperature threshold should be between 30~95	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.12.21.1.1.3`

igmpsnpVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.13.14 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpsnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::igmpsnpVlanTable'

igmpsnpVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.13.14.1

An entry in IgmpsnpVlanTable.

Indexes

igmpsnpVid

Column Syntax OID

igmpsnpVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.13.14.1.1

igmpsnpVlanName

.1.3.6.1.4.1.890.1.5.12.47.13.14.1.2

igmpsnpVlanRowStatus

inbandEntryIp inbandEntryVid

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.13.14.1.3

inbandIpTable

table

.1.3.6.1.4.1.890.1.5.12.47.14.6 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::inbandIpTable'

inbandIpEntry row .1.3.6.1.4.1.890.1.5.12.47.14.6.1

An entry in inbandIpTable.

Indexes

Column Syntax OID

inbandEntryIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.14.6.1.1

inbandEntrySubnetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.14.6.1.2

inbandEntryGateway

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.14.6.1.3

inbandEntryVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.14.6.1.4

inbandEntryManageable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.14.6.1.5

inbandEntryRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.14.6.1.6

filterTable

table

.1.3.6.1.4.1.890.1.5.12.47.15.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk filterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::filterTable'

filterEntry row .1.3.6.1.4.1.890.1.5.12.47.15.1.1

An entry in filterTable.

Indexes

filterMacAddr filterVid

Column Syntax OID

filterName

.1.3.6.1.4.1.890.1.5.12.47.15.1.1.1

filterActionState

Enumerationr/w

Enumerated Values:

1	discard_source
2	discard_destination
3	both

.1.3.6.1.4.1.890.1.5.12.47.15.1.1.2

filterMacAddr

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.890.1.5.12.47.15.1.1.3

filterVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.15.1.1.4

filterRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.15.1.1.5

mirrorTable

table

.1.3.6.1.4.1.890.1.5.12.47.16.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mirrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mirrorTable'

mirrorEntry row .1.3.6.1.4.1.890.1.5.12.47.16.3.1

An entry in mirrorTable.

Indexes

Column Syntax OID

mirrorMirroredState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.16.3.1.1

mirrorDirection

Enumerationr/w

Enumerated Values:

0	ingress
1	egress
2	both

.1.3.6.1.4.1.890.1.5.12.47.16.3.1.2

aggrGroupTable

table

.1.3.6.1.4.1.890.1.5.12.47.17.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::aggrGroupTable'

aggrGroupEntry row .1.3.6.1.4.1.890.1.5.12.47.17.3.1

An entry in aggrGroupTable.

Indexes

aggrGroupIndex

Column Syntax OID

aggrGroupIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.17.3.1.1

aggrGroupState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.17.3.1.2

aggrGroupDynamicState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.17.3.1.3

aggrPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.17.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::aggrPortTable'

aggrPortEntry row .1.3.6.1.4.1.890.1.5.12.47.17.4.1

An entry in aggrPortTable.

Indexes

aggrPortDynamicStateTimeout

Column Syntax OID

aggrPortGroup

Enumerationr/w

Enumerated Values:

0	none
1	t1

.1.3.6.1.4.1.890.1.5.12.47.17.4.1.1

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.17.4.1.2

accessCtlTable

table

.1.3.6.1.4.1.890.1.5.12.47.18.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accessCtlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::accessCtlTable'

accessCtlEntry row .1.3.6.1.4.1.890.1.5.12.47.18.1.1

An entry in accessCtlTable.

Indexes

accessCtlService

Column Syntax OID

accessCtlService

Enumeration

Enumerated Values:

1	telnet
2	ssh
3	ftp
4	http
5	https
6	icmp
7	snmp

.1.3.6.1.4.1.890.1.5.12.47.18.1.1.1

accessCtlEnable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.18.1.1.2

accessCtlServicePort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.18.1.1.3

accessCtlTimeout

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.18.1.1.4

securedClientTable

table

.1.3.6.1.4.1.890.1.5.12.47.18.2 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::securedClientTable'

securedClientEntry row .1.3.6.1.4.1.890.1.5.12.47.18.2.1

An entry in securedClientTable.

Indexes

securedClientIndex

Column Syntax OID

securedClientIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.1

securedClientEnable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.2

securedClientStartIp

IPv4 only

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.3

securedClientEndIp

IPv4 only

INET-ADDRESS-MIBInetAddressTyper/w

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.4

securedClientService

Bitsr/w

Enumerated Values:

0	telnet
1	ftp
2	http
3	icmp
4	snmp
5	ssh
6	https

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.5

securedClientIpAddrType

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.6

securedClientStartIpAddr

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.7

securedClientEndIpAddr

BRIDGE-MIBdot1dBasePort portQueuingMethodQueue

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.18.2.1.8

portQueuingMethodTable

table

.1.3.6.1.4.1.890.1.5.12.47.19.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portQueuingMethodTable'

portQueuingMethodEntry row .1.3.6.1.4.1.890.1.5.12.47.19.2.1

An entry in portQueuingMethodTable.

Indexes

Column	Syntax	OID
portQueuingMethodQueue 0...7	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.19.2.1.1`
portQueuingMethodWeight 0...15	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.19.2.1.2`

portQueuingMethodGeSpqTable

table

.1.3.6.1.4.1.890.1.5.12.47.19.4 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodGeSpqTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portQueuingMethodGeSpqTable'

portQueuingMethodGeSpqEntry row .1.3.6.1.4.1.890.1.5.12.47.19.4.1

An entry in portQueuingMethodGeSpqTable.

Indexes

globalDhcpRelayRemoteServerIp

Column Syntax OID

portQueuingMethodGeSpq

GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.

Enumerationr/w

Enumerated Values:

0	none
1	q0
2	q1
3	q2
4	q3
5	q4
6	q5
7	q6
8	q7

.1.3.6.1.4.1.890.1.5.12.47.19.4.1.1

globalDhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.12.47.20.1.6 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk globalDhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::globalDhcpRelayRemoteServerTable'

globalDhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.12.47.20.1.6.1

An entry in globalDhcpRelayRemoteServerTable.

Indexes

Column Syntax OID

globalDhcpRelayRemoteServerIp

globalDhcpRelayRemoteServerRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.20.1.6.1.1

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.20.1.6.1.2

dhcpRelayTable

table

.1.3.6.1.4.1.890.1.5.12.47.20.3.3 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpRelayTable'

dhcpRelayEntry row .1.3.6.1.4.1.890.1.5.12.47.20.3.3.1

An entry in dhcpRelayTable.

Indexes

dhcpRelayVid

Column Syntax OID

dhcpRelayOption82Enable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.1

dhcpRelayInfoData

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.3

dhcpRelayRemoteIDEnable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.4

dhcpRelayRemoteIDData

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.5

dhcpRelayInfoType

Enumerationr/w

Enumerated Values:

1	system
2	hostname

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.6

dhcpRelayRemoteIDType

Enumerationr/w

Enumerated Values:

1	system
2	portname
3	all

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.7

dhcpRelaySpv

Tag option setting for global DHCP relay. private(0), SP(1), SV(2), PV(3), SPV(4).

Enumerationr/w

Enumerated Values:

0	private
1	sp
2	sv
3	pv
4	spv

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.8

dhcpRelayDelim

Delimiter setting for global DHCP relay. none(0), pound[#](1), semicolon[;](2), dot[.](3), comma[,](4), slash[/](5), space[ ](6).

Enumerationr/w

Enumerated Values:

0	none
1	pound
2	semicolon
3	dot
4	comma
5	slash
6	space

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.9

dhcpRelayRIDDelim

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.10

dhcpRelaySwapOpt82

dhcpRelayVid dhcpRelayRemoteServerIp

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.20.3.3.1.11

dhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.12.47.20.3.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpRelayRemoteServerTable'

dhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.12.47.20.3.4.1

An entry in dhcpRelayRemoteServerTable.

Indexes

Column Syntax OID

dhcpRelayVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.20.3.4.1.1

dhcpRelayRemoteServerIp

dhcpRelayRemoteServerRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.20.3.4.1.2

staticRouteIp staticRouteMask

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.20.3.4.1.3

staticRouteTable

table

.1.3.6.1.4.1.890.1.5.12.47.21.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk staticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::staticRouteTable'

staticRouteEntry row .1.3.6.1.4.1.890.1.5.12.47.21.2.1

An entry in staticRouteTable.

Indexes

Column Syntax OID

staticRouteName

.1.3.6.1.4.1.890.1.5.12.47.21.2.1.1

staticRouteIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.21.2.1.2

staticRouteMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.21.2.1.3

staticRouteGateway

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.21.2.1.4

staticRouteMetric

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.21.2.1.5

staticRouteRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.21.2.1.6

arpTable

table

.1.3.6.1.4.1.890.1.5.12.47.22.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::arpTable'

arpEntry row .1.3.6.1.4.1.890.1.5.12.47.22.1.1

An entry in arpTable.

Indexes

arpIpAddr arpMacVid

Column Syntax OID

arpIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.22.1.1.1

arpIpAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.22.1.1.2

arpMacAddr

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.22.1.1.3

arpMacVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.22.1.1.4

arpType

1-static, 2-dynamic

Enumeration

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.890.1.5.12.47.22.1.1.5

portOpModePortTable

table

.1.3.6.1.4.1.890.1.5.12.47.24.1 · 1 row entry · 14 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portOpModePortTable'

portOpModePortEntry row .1.3.6.1.4.1.890.1.5.12.47.24.1.1

An entry in portOpModePortTable.

Indexes

portOpModePortSpeedDuplex

Column Syntax OID

Enumerationr/w

Enumerated Values:

0	auto
1	speed_10_half
2	speed_10_full
3	speed_100_half
4	speed_100_full
5	speed_1000_full

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.1

portOpModePortFlowCntl

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.2

portOpModePortName

OctetStringr/w

Constraints:
range: 0-9

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.3

portOpModePortModuleType

Enumeration

Enumerated Values:

0	fast_ethernet_10_100
1	gigabit_ethernet_100_1000

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.4

portOpModePortLinkUpType

Enumeration

Enumerated Values:

0	down
1	copper
2	fiber

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.5

portOpModePortIntrusionLock

portOpModePortLBTestSetup

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.6

This entry display latest loopback test status of port while performing loopback test.

Enumerationr/w

Enumerated Values:

1	internal_loopback_test
2	external_loopback_test
3	vtur_to_vtuo_loopback

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.7

portOpModePortLBTestStatus

This entry display latest loopback test status of port while performing loopback test.

Enumeration

Enumerated Values:

0	none
1	under_testing
2	success
3	fail

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.8

portOpModePortSwCounterReset

This entry resets port SW counter.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.9

portOpModePortVdslCounterReset

This entry resets port VDSL counter.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.10

portOpModePortVdslStatus

This entry reports VDSL link current status.

Enumeration

Enumerated Values:

1	idle
2	standby
3	showtime

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.11

portOpModePortVdslUptime

This entry reports VDSL link current link up time.

OctetString

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.12

portOpModePortTelephone

This entry reports port telephone number

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.13

portOpModePortForceOption82

This entry display the Force Option82 while performing DHCP snooping/DHCP relay/PPPoE option82 service.
1. force: remove the original option82 and tag option82 in DHCP/PPPoE packets
2. transparent: transparent DHCP/PPPo…

Enumerationr/w

Enumerated Values:

1	force
2	transparent

.1.3.6.1.4.1.890.1.5.12.47.24.1.1.14

portOpModePortLBTable

table

.1.3.6.1.4.1.890.1.5.12.47.24.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortLBTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portOpModePortLBTable'

portOpModePortLBEntry row .1.3.6.1.4.1.890.1.5.12.47.24.2.1

An entry in portOpModePortLBTable.

Indexes

Column Syntax OID

portOpModePortLBActive

Enumerationr/w

Enumerated Values:

active

.1.3.6.1.4.1.890.1.5.12.47.24.2.1.1

portOpModePortLBNumber

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.24.2.1.2

portOpModePortLBCount

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.24.2.1.3

portOpModePortLBPktSize

Packet size range from 64 bytes to 1518 bytes

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.24.2.1.4

portOpModePortLBResultTable

table

.1.3.6.1.4.1.890.1.5.12.47.24.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortLBResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portOpModePortLBResultTable'

portOpModePortLBResultEntry row .1.3.6.1.4.1.890.1.5.12.47.24.3.1

An entry in portOpModePortLBResultTable.

Indexes

Column Syntax OID

portOpModePortLBMaxRTT

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.24.3.1.1

portOpModePortLBMinRTT

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.24.3.1.2

portOpModePortLBAvgRTT

portOpModePortLBPktLossRate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.24.3.1.3

Loopback Packet loss rate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.24.3.1.4

portOpModePortLBStatus

Enumeration

Enumerated Values:

0	idle
1	in_progress
2	complete

.1.3.6.1.4.1.890.1.5.12.47.24.3.1.5

portBasedVlanPortListTable

table

.1.3.6.1.4.1.890.1.5.12.47.25.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedVlanPortListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portBasedVlanPortListTable'

portBasedVlanPortListEntry row .1.3.6.1.4.1.890.1.5.12.47.25.1.1

An entry in portBasedVlanPortListTable.

Indexes

Column	Syntax	OID
portBasedVlanPortListMembers	Q-BRIDGE-MIBPortListr/w	`.1.3.6.1.4.1.890.1.5.12.47.25.1.1.1`

eventTable

table

.1.3.6.1.4.1.890.1.5.12.47.26.1.1 · 1 row entry · 11 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk eventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::eventTable'

A list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table.

eventEntry row .1.3.6.1.4.1.890.1.5.12.47.26.1.1.1

An entry containing information about an
event in the event table.

Indexes

eventSeqNum

Column Syntax OID

eventSeqNum

This variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.

Sequence number is increment…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.1

eventEventId

This variable represents the event ID which uniquely
identifies the event in the entire system.

EventIdNumber

Description:

This textual convention describes the index that uniquely
identifies a fault event type in the entire system. Every fault
event type, e.g. link down, has a unique EventIdNumber.

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.2

eventName

This variable represents the name of the event, for
example 'Ethernet Link Down'

Constraints:
range: 0-40

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.3

eventInstanceType

This variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For mo…

InstanceType

Type Values:

1	unknown
2	node
3	shelf
4	line
5	switch
6	lsp
7	l2Interface
8	l3Interface
9	rowIndex

Description:

This textual convention describes the type of an instanceId
associated with each event and by that means specifies how
the instanceId variable should be intepreted.

Various instanceId types are specified belo…

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.4

eventInstanceId

This variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more det…

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.5

eventInstanceName

This variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.

DEPENDS ON: eventInstanceT…

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.6

eventSeverity

This variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention to …

EventSeverity

Type Values:

1	critical
2	major
3	minor
4	informational

Description:

This textual convention describes the severity of a fault event.
The decreasing order of severity is shown in the textual
convention.

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.7

eventSetTime

This table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM.

UtcTimeStamp

Description:

Universal Time Coordinated as a 32-bit value that designates
the number of seconds since Jan 1, 1970 12:00AM.

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.8

eventDescription

This variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no usefu…

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.9

eventServAffective

This variable indicates whether the event is service affective or not

EventServiceAffective

Type Values:

1	noServiceAffected
2	serviceAffected

Description:

This textual convention indicates whether an event is immediately
service affecting or not.

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.10

eventInstanceIdNumber

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.26.1.1.1.11

multicastPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.28.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::multicastPortTable'

multicastPortEntry row .1.3.6.1.4.1.890.1.5.12.47.28.1.1

An entry in multicastPortTable.

Indexes

multicastPortImmediateLeave

Column Syntax OID

multicastPortMaxGroupLimited

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.28.1.1.1

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.28.1.1.2

multicastPortMaxOfGroup

0..255

multicastPortIgmpFilteringProfile

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.28.1.1.3

.1.3.6.1.4.1.890.1.5.12.47.28.1.1.4

multicastPortQueryMode

Specify query mode for each port

Enumerationr/w

Enumerated Values:

1	auto_mode
2	fix_mode
3	edge_mode

.1.3.6.1.4.1.890.1.5.12.47.28.1.1.5

igmpMsgMaxLimited

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.28.1.1.6

igmpMsgLimit

0..255

multicastStatusVlanID multicastStatusPort multicastStatusGroup

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.28.1.1.7

multicastStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::multicastStatusTable'

multicastStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.29.1.1

An entry in multicastStatusTable.

Indexes

Column	Syntax	OID
multicastStatusIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.1.1.1`
multicastStatusVlanID	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.1.1.2`
multicastStatusPort	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.1.1.3`
multicastStatusGroup	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.47.29.1.1.4`
multicastStatusJoinCounter	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.1.1.5`
multicastStatusLeaveCounter	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.1.1.6`

igmpCountTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.2 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::igmpCountTable'

A count table of igmp query/report/leave message.

igmpCountEntry row .1.3.6.1.4.1.890.1.5.12.47.29.2.1

An entry in igmpCountTable.

Indexes

igmpCountIndex

Column	Syntax	OID
igmpCountIndex Index of IgmpCountEntry. 0 means total count in whole system	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.1`
igmpCountInQuery	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.2`
igmpCountInReport	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.3`
igmpCountInLeave	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.4`
igmpCountInQueryDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.5`
igmpCountInReportDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.6`
igmpCountInLeaveDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.7`
igmpCountOutQuery	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.8`
igmpCountOutReport	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.9`
igmpCountOutLeave	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.2.1.10`

multicastVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::multicastVlanStatusTable'

multicastVlanStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.29.3.1

An entry in multicastVlanStatusTable.

Indexes

multicastVlanStatusVlanID

Column Syntax OID

multicastVlanStatusVlanID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.29.3.1.1

multicastVlanStatusType

Enumeration

Enumerated Values:

1	dynamic
2	mvr
3	static

.1.3.6.1.4.1.890.1.5.12.47.29.3.1.2

multicastVlanQueryPort

.1.3.6.1.4.1.890.1.5.12.47.29.3.1.3

multicastVlanQuerySrcIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.29.3.1.4

igmpCounterPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCounterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::igmpCounterPortTable'

igmpCounterPortEntry row .1.3.6.1.4.1.890.1.5.12.47.29.4.1

An entry in igmpCounterPortTable.

Indexes

Column	Syntax	OID
igmpCounterPortJoin Join counter for the port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.4.1.1`
igmpCounterPortLeave Leave counter for the port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.4.1.2`
igmpCounterPortActiveGroup Current active group for the port	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.4.1.3`
igmpCounterPortQuery Query counter for the port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.4.1.4`

igmpCounterVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCounterVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::igmpCounterVlanTable'

igmpCounterVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.29.5.1

An entry in igmpCounterVlanTable.

Indexes

multicastStatusVlanID multicastStatusGroup

Column	Syntax	OID
igmpCounterVlanJoin Join counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.5.1.1`
igmpCounterVlanLeave Leave counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.5.1.2`
igmpCounterVlanActiveGroup Current active group for the Vlan	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.5.1.3`
igmpCounterVlanQuery Query counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.5.1.4`

multicastCurrentGroupStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.6 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastCurrentGroupStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::multicastCurrentGroupStatusTable'

multicastCurrentGroupStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.29.6.1

An entry in multicastCurrentGroupStatusTable.

Indexes

Column	Syntax	OID
multicastCurrentNumberOfActivePort Current number Of active port.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.6.1.1`

multicastClientSrcIpTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.7 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastClientSrcIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::multicastClientSrcIpTable'

multicastClientSrcIpEntry row .1.3.6.1.4.1.890.1.5.12.47.29.7.1

An entry in multicastClientSrcIpTable.

Indexes

multicastStatusVlanID multicastStatusPort multicastStatusGroup multicastClientSrcIpIndex

Column	Syntax	OID
multicastClientSrcIpIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.7.1.1`
multicastClientSrcIpAddress	RFC1155-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.47.29.7.1.2`

mgmdStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.8 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdStatusTable'

mgmdStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.29.8.1

An entry in mgmdStatusTable.

Indexes

mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddressType mgmdStatusGroupAddress

Column Syntax OID

mgmdStatusIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.29.8.1.1

mgmdStatusVlanID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.29.8.1.2

mgmdStatusPort

mgmdStatusGroupAddressType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.29.8.1.3

The address type of the mgmdStatusGroupAddress entry.

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.29.8.1.4

mgmdStatusGroupAddress

mgmdStatusGroupFilterMode

Constraints:
range: 4-4
range: 16-16

.1.3.6.1.4.1.890.1.5.12.47.29.8.1.5

The current cache state, applicable to MGMDv3-compatible
nodes. The value indicates whether the state is INCLUDE or
EXCLUDE.

Enumeration

Enumerated Values:

1	include
2	exclude

.1.3.6.1.4.1.890.1.5.12.47.29.8.1.6

mgmdStatusGroupUpTime

The value specifies the group up time of indicated
multicast group.

.1.3.6.1.4.1.890.1.5.12.47.29.8.1.7

mgmdCountTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.9 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdCountTable'

A count table of igmp/MLD query/report/leave message.

mgmdCountEntry row .1.3.6.1.4.1.890.1.5.12.47.29.9.1

An entry in mgmdCountTable.

Indexes

mgmdCountIndex

Column	Syntax	OID
mgmdCountIndex Index of mgmdCountEntry. 0 means total count in whole system	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.1`
mgmdCountInQuery	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.2`
mgmdCountInReport	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.3`
mgmdCountInLeave	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.4`
mgmdCountInQueryDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.5`
mgmdCountInReportDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.6`
mgmdCountInLeaveDrop	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.7`
mgmdCountOutQuery	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.8`
mgmdCountOutReport	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.9`
mgmdCountOutLeave	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.9.1.10`

mgmdVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.10 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdVlanStatusTable'

mgmdVlanStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.29.10.1

An entry in mgmdVlanStatusTable.

Indexes

mgmdVlanStatusVlanID

Column Syntax OID

mgmdVlanStatusVlanID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.29.10.1.1

mgmdVlanStatusType

Enumeration

Enumerated Values:

1	dynamic
2	mvr
3	static

.1.3.6.1.4.1.890.1.5.12.47.29.10.1.2

mgmdVlanQueryPort

.1.3.6.1.4.1.890.1.5.12.47.29.10.1.3

mgmdVlanQuerySrcIpType

The address type of the mgmdVlanQuerySrcIp entry.

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.29.10.1.4

mgmdVlanQuerySrcIp

Constraints:
range: 4-4
range: 16-16

.1.3.6.1.4.1.890.1.5.12.47.29.10.1.5

mgmdCounterPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.11 · 1 row entry · 25 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCounterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdCounterPortTable'

mgmdCounterPortEntry row .1.3.6.1.4.1.890.1.5.12.47.29.11.1

An entry in mgmdCounterPortTable.

Indexes

Column	Syntax	OID
mgmdCounterPortV1ReportIn Received V1 Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.1`
mgmdCounterPortV2ReportIn Received V2 Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.2`
mgmdCounterPortV3ReportIn Received V3 Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.3`
mgmdCounterPortLeaveIn Received Leave counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.4`
mgmdCounterPortTotalReportIn Received total Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.5`
mgmdCounterPortV1ReportOut Transmitted V1 Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.6`
mgmdCounterPortV2ReportOut Transmitted V2 Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.7`
mgmdCounterPortV3ReportOut Transmitted V3 Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.8`
mgmdCounterPortLeaveOut Transmitted Leave counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.9`
mgmdCounterPortTotalReportOut Transmitted total Report counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.10`
mgmdCounterPortV1QueryIn Received V1 Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.11`
mgmdCounterPortV2QueryIn Received V2 Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.12`
mgmdCounterPortV3QueryIn Received V3 Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.13`
mgmdCounterPortTotalQueryIn Received total Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.14`
mgmdCounterPortV1QueryOut Transmitted V1 Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.15`
mgmdCounterPortV2QueryOut Transmitted V2 Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.16`
mgmdCounterPortV3QueryOut Transmitted V3 Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.17`
mgmdCounterPortTotalQueryOut Transmitted total Query counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.18`
mgmdCounterPortRecordDropMaxGrpLimit Record drop by max group limit counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.19`
mgmdCounterPortRecordDropGrpFilter Record drop by group filter counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.20`
mgmdCounterPortRecordDropMVR Record drop by MVR counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.21`
mgmdCounterPortRecordDropOther Record drop by other counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.22`
mgmdCounterPortDropRateLimit Packet drop by rate limit counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.23`
mgmdCounterPortReportDropOther Report drop by other counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.24`
mgmdCounterPortQueryDropOther Query drop by other counter for indicated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.11.1.25`

mgmdCounterVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.12 · 1 row entry · 25 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCounterVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdCounterVlanTable'

mgmdCounterVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.29.12.1

An entry in mgmdCounterVlanTable.

Indexes

mgmdStatusVlanID mgmdStatusGroupAddressType mgmdStatusGroupAddress

Column	Syntax	OID
mgmdCounterVlanV1ReportIn Received V1 Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.1`
mgmdCounterVlanV2ReportIn Received V2 Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.2`
mgmdCounterVlanV3ReportIn Received V3 Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.3`
mgmdCounterVlanLeaveIn Received Leave counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.4`
mgmdCounterVlanTotalReportIn Received total Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.5`
mgmdCounterVlanV1ReportOut Transmitted V1 Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.6`
mgmdCounterVlanV2ReportOut Transmitted V2 Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.7`
mgmdCounterVlanV3ReportOut Transmitted V3 Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.8`
mgmdCounterVlanLeaveOut Transmitted Leave counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.9`
mgmdCounterVlanTotalReportOut Transmitted total Report counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.10`
mgmdCounterVlanV1QueryIn Received V1 Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.11`
mgmdCounterVlanV2QueryIn Received V2 Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.12`
mgmdCounterVlanV3QueryIn Received V3 Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.13`
mgmdCounterVlanTotalQueryIn Received total Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.14`
mgmdCounterVlanV1QueryOut Transmitted V1 Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.15`
mgmdCounterVlanV2QueryOut Transmitted V2 Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.16`
mgmdCounterVlanV3QueryOut Transmitted V3 Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.17`
mgmdCounterVlanTotalQueryOut Transmitted total Query counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.18`
mgmdCounterVlanRecordDropMaxGrpLimit Record drop by max group limit counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.19`
mgmdCounterVlanRecordDropGrpFilter Record drop by group filter counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.20`
mgmdCounterVlanRecordDropMVR Record drop by MVR counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.21`
mgmdCounterVlanRecordDropOther Record drop by other counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.22`
mgmdCounterVlanDropRateLimit Report drop by rate limit counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.23`
mgmdCounterVlanReportDropOther Report drop by other counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.24`
mgmdCounterVlanQueryDropOther Query drop by other counter for indicated Vlan.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.29.12.1.25`

mgmdCurrentGroupStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.13 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCurrentGroupStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdCurrentGroupStatusTable'

mgmdCurrentGroupStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.29.13.1

An entry in mgmdCurrentGroupStatusTable.

Indexes

Column	Syntax	OID
mgmdCurrentNumberOfActivePort Current number Of active port.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.29.13.1.1`

mgmdClientSrcIpTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.14 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdClientSrcIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdClientSrcIpTable'

mgmdClientSrcIpEntry row .1.3.6.1.4.1.890.1.5.12.47.29.14.1

An entry in mgmdClientSrcIpTable.

Indexes

mgmdClientSrcIpAddressType mgmdClientSrcIpIndex mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddress

Column Syntax OID

mgmdClientSrcIpIndex

mgmdClientSrcIpAddressType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.29.14.1.1

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.29.14.1.2

mgmdClientSrcIpAddress

mgmdSrcListAddressType mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddress mgmdSrcListAddress

Constraints:
range: 4-4
range: 16-16

.1.3.6.1.4.1.890.1.5.12.47.29.14.1.3

mgmdSrcListTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.15 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdSrcListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdSrcListTable'

The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair
on a host.

mgmdSrcListEntry row .1.3.6.1.4.1.890.1.5.12.47.29.15.1

An entry (conceptual row) in the mgmdSrcListTable.

Indexes

Column Syntax OID

mgmdSrcListAddressType

The address type of the InetAddress variables in this
table. This value applies to the mgmdStatusGroupAddress
and mgmdSrcListAddress entries.

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.29.15.1.1

mgmdSrcListAddress

The IP multicast group address for which this entry
contains information.

Constraints:
range: 4-4
range: 16-16

.1.3.6.1.4.1.890.1.5.12.47.29.15.1.2

mgmdPortCounterResetTable

table

.1.3.6.1.4.1.890.1.5.12.47.29.16 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdPortCounterResetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdPortCounterResetTable'

The (conceptual) table listing all interface entries.

mgmdPortCounterResetEntry row .1.3.6.1.4.1.890.1.5.12.47.29.16.1

An entry (conceptual row) in the mgmdPortCounterResetTable.

Indexes

igmpFilteringProfileName igmpFilteringProfileStartAddress igmpFilteringProfileEndAddress

Column Syntax OID

mgmdPortCounterReset

Clear per port mgmd counter, always return disable.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.29.16.1.1

igmpFilteringProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.30.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpFilteringProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::igmpFilteringProfileTable'

igmpFilteringProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.30.2.1

An entry in igmpFilteringProfileTable.

Indexes

Column Syntax OID

igmpFilteringProfileName

igmpFilteringProfileStartAddress

.1.3.6.1.4.1.890.1.5.12.47.30.2.1.1

igmpFilteringProfileEndAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.30.2.1.2

igmpFilteringProfileRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.30.2.1.3

mgmdFilterProfileName mgmdFilterProfileAddressType mgmdFilterProfileStartAddress mgmdFilterProfileEndAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.30.2.1.4

mgmdFilterProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.30.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdFilterProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdFilterProfileTable'

mgmdFilterProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.30.3.1

An entry in mgmdFilterProfileTable.For v4 and v6 address

Indexes

Column Syntax OID

mgmdFilterProfileName

mgmdFilterProfileAddressType

.1.3.6.1.4.1.890.1.5.12.47.30.3.1.1

The type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined
in the InetAddress MIB.

mgmdFilterProfileStartAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.30.3.1.2

The Start IP address of this profile.

mgmdFilterProfileEndAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.30.3.1.3

The End IP address of this profile.

mgmdFilterProfileRowStatus

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.30.3.1.4

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.30.3.1.5

mvrTable

table

.1.3.6.1.4.1.890.1.5.12.47.31.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mvrTable'

mvrEntry row .1.3.6.1.4.1.890.1.5.12.47.31.2.1

An entry in mvrTable.

Indexes

mvrVlanID

Column Syntax OID

mvrVlanID

1..4094

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.31.2.1.1

mvrName

.1.3.6.1.4.1.890.1.5.12.47.31.2.1.2

mvrMode

Enumerationr/w

Enumerated Values:

0	dynamic
1	compatible

.1.3.6.1.4.1.890.1.5.12.47.31.2.1.3

mvrRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.31.2.1.4

mvr8021pPriority

Set the 802.1p priority of control messages within MVR (0~7)

mvrVlanID BRIDGE-MIBdot1dBasePort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.31.2.1.5

mvrPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.31.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mvrPortTable'

mvrPortEntry row .1.3.6.1.4.1.890.1.5.12.47.31.3.1

An entry in mvrPortTable.

Indexes

Column Syntax OID

mvrPortRole

Enumerationr/w

Enumerated Values:

1	none
2	source_port
3	receiver_port

.1.3.6.1.4.1.890.1.5.12.47.31.3.1.1

mvrPortTagging

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.31.3.1.2

mvrGroupTable

table

.1.3.6.1.4.1.890.1.5.12.47.31.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mvrGroupTable'

mvrGroupEntry row .1.3.6.1.4.1.890.1.5.12.47.31.5.1

An entry in mvrGroupTable.

Indexes

mvrVlanID mvrGroupName

Column Syntax OID

mvrGroupName

.1.3.6.1.4.1.890.1.5.12.47.31.5.1.1

mvrGroupStartAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.31.5.1.2

mvrGroupEndAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.31.5.1.3

mvrGroupRowStatus

mvrVlanID mvrMgmdGroupName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.31.5.1.4

mvrMgmdGroupTable

table

.1.3.6.1.4.1.890.1.5.12.47.31.7 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrMgmdGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mvrMgmdGroupTable'

mvrMgmdGroupEntry row .1.3.6.1.4.1.890.1.5.12.47.31.7.1

An entry in mvrMgmdGroupTable.

Indexes

Column Syntax OID

mvrMgmdGroupName

INET-ADDRESS-MIBInetAddressTyper/w

.1.3.6.1.4.1.890.1.5.12.47.31.7.1.1

mvrMgmdGroupAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.31.7.1.2

mvrMgmdGroupStartAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.31.7.1.3

mvrMgmdGroupEndAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.31.7.1.4

mvrMgmdGroupRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.31.7.1.5

sysLogTypeTable

table

.1.3.6.1.4.1.890.1.5.12.47.33.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::sysLogTypeTable'

sysLogTypeEntry row .1.3.6.1.4.1.890.1.5.12.47.33.2.1

An entry in sysLogTypeTable.

Indexes

sysLogTypeIndex

Column Syntax OID

sysLogTypeIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.33.2.1.1

sysLogTypeName

.1.3.6.1.4.1.890.1.5.12.47.33.2.1.2

sysLogTypeState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.33.2.1.3

sysLogTypeFacility

Enumerationr/w

Enumerated Values:

0	local_user0
1	local_user1
2	local_user2
3	local_user3
4	local_user4
5	local_user5
6	local_user6
7	local_user7

.1.3.6.1.4.1.890.1.5.12.47.33.2.1.4

sysLogServerTable

table

.1.3.6.1.4.1.890.1.5.12.47.33.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::sysLogServerTable'

sysLogServerEntry row .1.3.6.1.4.1.890.1.5.12.47.33.3.1

An entry in sysLogServerTable.

Indexes

sysLogServerAddress

Column Syntax OID

sysLogServerAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.33.3.1.1

sysLogServerLogLevel

Enumerationr/w

Enumerated Values:

0	level0
1	level0_1
2	level0_2
3	level0_3
4	level0_4
5	level0_5
6	level0_6
7	level0_7

.1.3.6.1.4.1.890.1.5.12.47.33.3.1.2

sysLogServerRowStatus

sysLogServerInfoIpAddrType sysLogServerInfoIpAddr

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.33.3.1.3

sysLogServerInfoTable

table

.1.3.6.1.4.1.890.1.5.12.47.33.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::sysLogServerInfoTable'

sysLogServerInfoEntry row .1.3.6.1.4.1.890.1.5.12.47.33.4.1

An entry in sysLogServerInfoTable.

Indexes

Column Syntax OID

sysLogServerInfoIpAddrType

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.33.4.1.1

sysLogServerInfoIpAddr

sysLogServerInfoRowStatus

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.33.4.1.2

sysLogServerInfoLogLevel

Enumerationr/w

Enumerated Values:

0	level0
1	level0_1
2	level0_2
3	level0_3
4	level0_4
5	level0_5
6	level0_6
7	level0_7

.1.3.6.1.4.1.890.1.5.12.47.33.4.1.3

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.33.4.1.4

diffservMapTable

table

.1.3.6.1.4.1.890.1.5.12.47.34.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::diffservMapTable'

diffservMapEntry row .1.3.6.1.4.1.890.1.5.12.47.34.2.1

An entry in diffservMapTable.

Indexes

diffservMapDscp

Column	Syntax	OID
diffservMapDscp 0-63	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.34.2.1.1`
diffservMapPriority 0-7	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.34.2.1.2`

diffservPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.34.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::diffservPortTable'

diffservPortEntry row .1.3.6.1.4.1.890.1.5.12.47.34.3.1

An entry in diffservPortTable.

Indexes

Column Syntax OID

diffservPortState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.34.3.1.1

layer2Table

table

.1.3.6.1.4.1.890.1.5.12.47.35.1.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk layer2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::layer2Table'

layer2Entry row .1.3.6.1.4.1.890.1.5.12.47.35.1.1.1

An entry in layer2Table.

Indexes

vturIgmpSnoopingStateSetup

Column Syntax OID

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.1.1.1.2

portTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portTable'

portEntry row .1.3.6.1.4.1.890.1.5.12.47.35.2.1.1

An entry in portTable.

Indexes

BRIDGE-MIBdot1dBasePort portNumber

Column Syntax OID

portNumber

Display all ports we got in CPE side

BRIDGE-MIBdot1dBasePort vturWanIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.2.1.1.1

portAdminStatus

Specify CPE port's admin status.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.35.2.1.1.2

portOperStatus

CPE port's current status.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.35.2.1.1.3

portSpeedDuplex

Specify each port's speed and duplex in CPE side.

Enumerationr/w

Enumerated Values:

1	autoneg
2	half_10M
3	full_10M
4	half_100M
5	full_100M

.1.3.6.1.4.1.890.1.5.12.47.35.2.1.1.4

portOperSpeed

CPE port's current speed.

Enumeration

Enumerated Values:

0	linkdown
1	autoneg
2	half_10M
3	full_10M
4	half_100M
5	full_100M

.1.3.6.1.4.1.890.1.5.12.47.35.2.1.1.8

vturWanTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1 · 1 row entry · 14 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturWanTable'

vturWanEntry row .1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1

An entry in vturWanTable.

Indexes

Column Syntax OID

vturWanIndex

Display the wan index range from 1 to 4 we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.1

vturVlanTagging

Display the vlan tagging we got in CPE side

Enumerationr/w

Enumerated Values:

1	disable
2	vlan_mux
3	auto_vlan

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.2

vturVlanID

Display the vlan id range from 1 to 4094 we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.3

vtur8021p

Display the 802.1p value range from 0 to 7 we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.4

vturPPPUsername

Display the PPP username we got in CPE side

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.5

vturPPPPassword

Display the PPP password we got in CPE side

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.6

vturWanProtocol

Display the wan protocol info we got in CPE side

Enumerationr/w

Enumerated Values:

1	pppoe
2	mer
3	bridge

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.7

vturWanProtocolSetting

Display the wan service enable/disable status we got in CPE side

Bitsr/w

Enumerated Values:

0	dhcp_client_
1	nat
2	firewall
3	igmp

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.8

vturWanIP

Display the wan IP setting we got in CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.9

vturWanSubnetMask

Display the wan subnet mask we got in CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.10

vturWanService

Display the wan service enable/disable status we got in CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.11

vturWanRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.12

vturWanDefaultGateway

Display the wan default gateway enable/disable status we got in CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.13

vturWanDefaultDNS

Display the wan default DNS enable/disable status we got in CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.4.1.1.1.14

vturWanCommonTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturWanCommonTable'

vturWanCommonEntry row .1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1

An entry in vturWanCommonTable.

Indexes

Column Syntax OID

vturWanQoS

vturEnableAutoDefaultGateway

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1.1

Display the enable auto default gateay setting we get from CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1.2

vturDefaultGatewayIP

Display the default gateway setting we get from CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1.3

vturVitualPortEnable

Display Enable/Disable virtual port on eth1 setting we get on CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1.4

vturAutoDNS

Display Enable/Disable Auto DNS on eth1 setting we get on CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1.5

vturPrimaryDNS

Display the primary DNS address we get from CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1.6

vturSecodnaryDNS

Display the secondary DNS address we get from CPE side

BRIDGE-MIBdot1dBasePort vturClassificationIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.4.2.1.1.7

vturClassificationTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.5.1 · 1 row entry · 25 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturClassificationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturClassificationTable'

vturClassificationEntry row .1.3.6.1.4.1.890.1.5.12.47.35.5.1.1

An entry in vturClassificationTable.

Indexes

Column Syntax OID

vturClassificationIndex

Display the classification index range from 1 to 8 we got in CPE side

vturClassificationRuleEnable

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.1

Display the classification enable/disable status we got in CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.2

vturWanInterface

Display the wan interface index range from 1 to 4 we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.3

vturClassificationQueue

Display the assigned queue (1-4)802.1p value we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.4

vturClassification8021p

Mark 802.1p if 802.1q is enabled [0-7]

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.5

vturClassificationVid

Display the 802.1Q VLAN ID: [1-4094]

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.6

vturFilterPhysicalPort

Physical LAN Port number

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.7

vturFilterProtocol

Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4

Enumerationr/w

Enumerated Values:

1	tcp_udp
2	tcp
3	udp
4	icmp

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.8

vturFilterSourceIP

Display the filtering source IP we got in CPE side

vturFilterSourceSubnetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.9

Display the filtering source subnet mask we got in CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.10

vturFilterDestinationIP

Display the filtering destination IP we got in CPE side

vturFilterDestinationSubnetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.11

Display the filtering destination subnet mask we got in CPE side

vturFilterSourcePortStart

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.12

Display the filtering source port start we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.13

vturFilterSourcePortEnd

Display the filtering source port end we got in CPE side

vturFilterDestinationPortStart

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.14

Display the filtering destination port start we got in CPE side

vturFilterDestinationPortEnd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.15

Display the filtering destination end port we got in CPE side

vturFilterDestinationMACAddr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.16

vturFilterSourceMACAddr

Display the filtering source MAC addr we got in CPE side

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.17

vturFilterSourceMACMask

Display the filtering source MAC mask we got in CPE side

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.18

Display the filtering destination MAC addr we got in CPE side

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.19

vturFilterDestinationMACMask

Display the filtering destination MAC mask we got in CPE side

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.20

vturFilter8021p

Display the filtering 802.1p value we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.21

vturFilterProtocolType

Display the filtering protocol type we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.22

vturPolicyGatewayIP

Display the filtering protocol type we got in CPE side

vturClassificationRowStatus

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.23

vturClassificationBandwidth

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.24

Display limited bandwidth control(1-255 0:disable) we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.5.1.1.25

vturMntTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.6.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturMntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturMntTable'

vturMntEntry row .1.3.6.1.4.1.890.1.5.12.47.35.6.1.1

An entry in VTUR Misc Table.

Indexes

Column Syntax OID

mntOperation

Specify the operation of VTUR

Enumerationr/w

Enumerated Values:

1	layer2Setup
2	portSetup
3	priorityQueueSetup
4	dot1qVlanSetup
5	portBasedVlanSetup
6	loadFactoryDefault
7	resetSW
8	apBasicSetup
9	apSecuritySetup
10	apRadiusSetup
11	apMacFilterSetup
12	apMacFilterAddrSetup
13	reinit
14	consoleSetup
15	remoteFunctionSetup
16	regetstatue
17	protocolBasedVlanSetup
18	vturWanSetup
19	vturClassificationSetup
20	vturLanSetup
21	vturResetCounter
22	loadDefaultWithoutIP

.1.3.6.1.4.1.890.1.5.12.47.35.6.1.1.1

mntCommit

Apply maintenance setting to vtur

Enumerationr/w

Enumerated Values:

0	idle
1	commit

.1.3.6.1.4.1.890.1.5.12.47.35.6.1.1.2

mntStatus

Display the current status regarding to the operation.

Enumeration

Enumerated Values:

0	in_progress
1	success
2	fail

.1.3.6.1.4.1.890.1.5.12.47.35.6.1.1.3

mntRefetchCPEInfo

Refetch current CPE information.

Enumerationr/w

Enumerated Values:

0	none
1	refetching

.1.3.6.1.4.1.890.1.5.12.47.35.6.1.1.4

vturAPGeneralStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPGeneralStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPGeneralStatisticsTable'

vturAPGeneralStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1

An entry in VTUR AP General Statistics Table.

Indexes

Column	Syntax	OID
lanRxBytes Received bytes on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.1`
lanRxPkts Received frames on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.2`
lanTxBytes Transmitted bytes on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.3`
lanTxPkts Transmitted frames on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.4`
vdslRxBytes Received bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.5`
vdslRxPkts Received frames on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.6`
vdslTxBytes Transmitted bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.7`
vdslTxPkts Transmitted frames on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.8`
wlanRxBytes Received bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.9`
wlanRxPkts Received frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.10`
wlanRxErrs Received error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.11`
wlanRxDrops Received drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.12`
wlanTxBytes Transmitted bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.13`
wlanTxPkts Transmitted frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.14`
wlanTxErrs Transmitted error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.15`
wlanTxDrops Transmitted drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.1.1.1.16`

vturAPWlanBasicTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanBasicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanBasicTable'

vturAPWlanBasicEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1

An entry in VTUR AP Wlan Basic Table.

Indexes

Column	Syntax	OID
enable 0: disable wlan 1: enable wlan	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.1`
ssid SSID of the AP	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.2`
bssid Mac address of AP	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.3`
hidden 0: not hide AP's SSID 1: hide AP's SSID	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.4`
channel Channel number of the AP	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.5`
mode 1: B or G mix mode 2: Pure G mode 3: Pure B mode	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.6`
txPower Transmit power 1: 30 mW 2: 15 mW	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.7`
multicastRate Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps 0: auto 2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode 12, 18, 24, 36, 48, 96, 108: Transmit rate = 6…	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.1.1.8`

vturAPWlanSecurityTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2 · 1 row entry · 12 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanSecurityTable'

vturAPWlanSecurityEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
securityMode 1: No security 2: Static WEP 3: WPA-PSK 4: WPA 5: WPA2 6: WPA2-PSK	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.1`
wepEncryp This field is for SecurityMode = static WEP. 1: 64-Bit 2: 128-Bit	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.2`
keyId This field is for SecurityMode = static WEP. It indicate which key will be used for encryption. If KeyId is equal to 1, AP will use Key1 to encrypt frame.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.3`
key1 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key1 will be 10 heximal digits. If WEPEncryp is 128-Bit, key1 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.4`
key2 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key2 will be 10 heximal digits. If WEPEncryp is 128-Bit, key2 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.5`
key3 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key3 will be 10 heximal digits. If WEPEncryp is 128-Bit, key3 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.6`
key4 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key4 will be 10 heximal digits. If WEPEncryp is 128-Bit, key4 will be 26 heximal digits.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.7`
psk This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.8`
wpaMix This field is for SecurityMode = WPA2 or WPA2-PSK. When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP. When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP co…	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.9`
reAuthTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger re-authentication with station every [ReAuthTime] seconds.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.10`
idleTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will flush station??s information if there are no packets from station for [idleTime] seconds.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.11`
gtkTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger the update of group key with station every [GTKTime] seconds.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.2.1.12`

vturAPWlanRadiusTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanRadiusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanRadiusTable'

vturAPWlanRadiusEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
authServIP This field is the IP address of authentication server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1.1`
authServPort This field is the port number of authentication server.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1.2`
authServSecret This field is the shared secret of authentication server.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1.3`
accServActive This field is for activating or inactivating accounting server. 0: inactivate accounting server. 1: activate accounting server	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1.4`
accServIP This field is the IP address of accounting server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1.5`
accServPort This field is the port number of accounting server.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1.6`
accServSecret This field is the shared secret of accounting server.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.3.1.7`

vturAPWlanMacFilterTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanMacFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanMacFilterTable'

vturAPWlanMacFilterEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.1.1

An entry in VTUR AP Wlan Mac Filter Table.

Indexes

BRIDGE-MIBdot1dBasePort fltStaIndex

Column	Syntax	OID
macFltActive Activate or inactivate wlan MAC filter. 0: Inactive 1: Active	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.1.1.1`
macFltAction 0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8. 1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.1.1.2`

vturAPWlanMacFltAddrTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanMacFltAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanMacFltAddrTable'

vturAPWlanMacFltAddrEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
fltStaIndex The index for Mac filter	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.2.1.1`
macFltAddr The address for Mac filter	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.4.2.1.2`

vturAPWlanStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatisticsTable'

vturAPWlanStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort staIndex

Column	Syntax	OID
inPkts Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.1`
inOctets Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.2`
inUCasts Received unicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.3`
inMCasts Received multicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.4`
rxFCSErrors Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.5`
outPkts Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.6`
outOctets Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.7`
outUCasts Transmitted unicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.8`
outMCasts Transmitted multicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.5.1.9`

vturAPWlanStaListTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.7.2.6 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStaListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStaListTable'

vturAPWlanStaListEntry row .1.3.6.1.4.1.890.1.5.12.47.35.7.2.6.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
staIndex The index of associated WLAN STA. Max = 32, Min = 1	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.6.1.1`
staMacAddr The address of associated WLAN STA	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.35.7.2.6.1.2`

vturConsoleTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.8.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturConsoleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturConsoleTable'

vturConsoleEntry row .1.3.6.1.4.1.890.1.5.12.47.35.8.1.1

An entry in vturConsoleTable.

Indexes

Column Syntax OID

vturConsoleSet

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.35.8.1.1.1

vturConsoleAdminPassword

The operation for vtur device admin password

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.8.1.1.2

vturConsoleUserPassword

The operation for vtur device user password

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.8.1.1.3

remoteFunctionTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.9.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk remoteFunctionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::remoteFunctionTable'

remoteFunctionEntry row .1.3.6.1.4.1.890.1.5.12.47.35.9.1.1

An entry in RemoteFunctionTable.

Indexes

BRIDGE-MIBdot1dBasePort staIndex

Column Syntax OID

telnet

Enumerationr/w

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.35.9.1.1.3

tftp

Enumerationr/w

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.35.9.1.1.4

web

Enumerationr/w

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.35.9.1.1.5

snmp

Enumerationr/w

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.35.9.1.1.6

ssh

Enumerationr/w

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.35.9.1.1.7

wireless

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.890.1.5.12.47.35.9.1.1.8

vturMacTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.10.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturMacTable'

vturMacTableEntry row .1.3.6.1.4.1.890.1.5.12.47.35.10.1.1

An entry in vturMacTable.

Indexes

Column	Syntax	OID
vturMacIndex The index of associated vtur STA. Max = 32, Min = 1	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.35.10.1.1.1`
vturMacAddr The address of associated vtur STA	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.35.10.1.1.2`

vturLanTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.11.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturLanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturLanTable'

vturLanEntry row .1.3.6.1.4.1.890.1.5.12.47.35.11.1.1

An entry in vturLanTable.

Indexes

Column Syntax OID

vturLanIP

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.11.1.1.1

vturLanSubnetmask

vturDHCPServerStartIPAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.11.1.1.2

vturDHCPOption

Enumerationr/w

Enumerated Values:

1	disable_dhcp_server
2	enable_dhcp_server
3	dhcp_server_relay

.1.3.6.1.4.1.890.1.5.12.47.35.11.1.1.3

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.11.1.1.4

vturDHCPServerEndIPAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.11.1.1.5

vturDHCPServerSubnetmask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.11.1.1.6

vturDHCPServerIPAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.35.11.1.1.7

vturCFMTable

table

.1.3.6.1.4.1.890.1.5.12.47.35.12.1 · 1 row entry · 14 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturCFMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturCFMTable'

vturCFMEntry row .1.3.6.1.4.1.890.1.5.12.47.35.12.1.1

An entry in vturCFMTable.

Indexes

Column Syntax OID

vturCFMCommit

Set 1 to commit CFM operation and read value always return 0

Enumerationr/w

Enumerated Values:

commit

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.1

vturCFMMdName

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.2

vturCFMMaName

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.3

vturCFMVid

IEEE8021-CFM-MIBDot1agCfmMepIdr/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.4

vturCFMMepId

Type Constraints:
range: 1..8191

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.5

vturCFMMdLevel

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.6

vturCFMAction

Currently only support 0:save ,3:send loopback message and 5:load cpe cfm default

Enumerationr/w

Enumerated Values:

0	save
1	enable_cfm
2	disable_cfm
3	send_loopback_message
4	send_linktrace_message
5	reset_configuration

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.7

vturCFMDestMAC

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.8

vturCFMLBMCount

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.9

vturCFMResultSentLBM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.10

vturCFMResultInorderLBM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.11

vturCFMResultOutorderLBM

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.12

vturMACAddr

CPE MAC address

OctetString

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.13

vturCFMReadStatus

Set 1 to commit CFM Read operation and read value always return 0

Enumerationr/w

Enumerated Values:

commit

.1.3.6.1.4.1.890.1.5.12.47.35.12.1.1.14

vturInfoTable

table

.1.3.6.1.4.1.890.1.5.12.47.37.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturInfoTable'

vturInfoEntry row .1.3.6.1.4.1.890.1.5.12.47.37.1.1

An entry in vturInfoTable.

Indexes

protoBasedVlanPort protoBasedVlanPacketType protoBasedVlanEtherType

Column	Syntax	OID
vturName Display remote device name	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.37.1.1.1`
vturSysVersion Display remote device system version info	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.37.1.1.2`
vturModemCodeVersion Display remote device VDSL modem code version info	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.37.1.1.3`

protoBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.38.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk protoBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::protoBasedVlanTable'

protoBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.38.1.1

An entry in protoBasedVlanTable.

Indexes

Column Syntax OID

protoBasedVlanPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.38.1.1.1

protoBasedVlanPacketType

Enumeration

Enumerated Values:

1	etherII
2	snap
3	llc

.1.3.6.1.4.1.890.1.5.12.47.38.1.1.2

protoBasedVlanEtherType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.38.1.1.3

protoBasedVlanName

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.12.47.38.1.1.4

protoBasedVlanVid

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.38.1.1.5

protoBasedVlanPriority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.47.38.1.1.6

protoBasedVlanState

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.38.1.1.7

classifierRuleTable

table

.1.3.6.1.4.1.890.1.5.12.47.39.1 · 1 row entry · 24 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk classifierRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::classifierRuleTable'

classifierRuleEntry row .1.3.6.1.4.1.890.1.5.12.47.39.1.1

An entry in classifierRuleTable.

Indexes

classifierName

Column Syntax OID

classifierName

Name of classifier rule.

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.1

classifierEnable

Classifier rule enabled/disabled.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.2

classifierPacketFormat

Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5).

Enumerationr/w

Enumerated Values:

1	all
2	ethernetII_untagged
3	ethernetII_tagged
4	ethernet802_3_untagged
5	ethernet802_3_tagged

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.3

classifierVlanId

Vlan id for classifer rule, 1~4094.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.4

classifier8021pPriority

802.1p priority for classifier rule, 0~7.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.5

classifierEtherType

Ether type for classifier rule, in decimal expression.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.6

classifierSrcMAC

Source mac address for classifier rule

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.7

classifierIncomingPort

Incoming Port for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.8

classifierDstMAC

Destination mac address for classifier rule

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.9

classifierDSCP

DSCP for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.10

classifierIpProtocol

IP Protocol for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.11

classifierEstablishOnly

IP Protocol for EstablishOnly for classifier rule

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.12

classifierSrcIp

Source IP address for classifier rule

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.13

classifierSrcIpMask

Source IP Mask for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.14

classifierSrcSocket

Source Socket Number for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.15

classifierDstIp

Destination IP address for classifier rule

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.16

classifierDstIpMask

Destination IP Mask for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.17

classifierDstSocket

Destination Socket Number for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.18

classifierRowstatus

Row Status for classifier rule

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.19

classifierSrcIpv6

Source IPv6 address for classifier rule

IPV6-TCIpv6Addressr/w

Type Constraints:
range: 16

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.20

classifierSrcIpv6Mask

Source IPv6 Mask for classifier rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.21

classifierDstIpv6

Destination IPv6 address for classifier rule

IPV6-TCIpv6Addressr/w

Type Constraints:
range: 16

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.22

classifierDstIpv6Mask

Destination IPv6 Mask for classifier rule

classifierIncomingPortList

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.23

Incoming PortList for classifier rule

.1.3.6.1.4.1.890.1.5.12.47.39.1.1.24

policyTable

table

.1.3.6.1.4.1.890.1.5.12.47.40.1 · 1 row entry · 19 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk policyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::policyTable'

policyEntry row .1.3.6.1.4.1.890.1.5.12.47.40.1.1

An entry in policyTable.

Indexes

policyName

Column Syntax OID

policyName

Name of policy rule.

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.1

policyEnable

Policy rule enabled/disabled.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.2

policyClassifier

Classifier of policy rule.

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.3

policyVlanId

Vlan id for policy rule, 1~4094.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.4

policyEgressPort

Egress Port for policy rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.5

policyOutPktFormat

Outgoing packet format for Egress port for policy rule

Enumerationr/w

Enumerated Values:

1	tag
2	untag

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.6

policy8021pPriority

802.1p priority for policy rule, 0~7.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.7

policyDSCP

DSCP for policy rule.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.8

policyTOS

TOS for policy rule, 0~7

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.9

policyBandwidth

Bandwidth for policy rule

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.10

policyOutOfProfileDSCP

Out Of Profile DSCP for policy rule.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.11

policyForwardingAction

Forwarding Action for policy rule

Enumerationr/w

Enumerated Values:

1	no_change
2	discard_the_packet
3	do_not_drop_the_matching_frame_previously_marked_for_dopping

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.12

policyPriorityAction

Priority Action for policy rule

Enumerationr/w

Enumerated Values:

1	no_change
2	set_the_packets_802_1_priority
3	send_the_packet_to_priority_queue
4	replace_the_802_1_priority_field_with_the_IP_TOS_value

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.13

policyDiffServAction

DiffServ Action for policy rule

Enumerationr/w

Enumerated Values:

1	no_change
2	set_the_packets_TOS_field
3	replace_the_IP_TOS_field_with_the_802_1_priority_value
4	set_the_Diffserv_Codepoint_field_in_the_frame

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.14

policyOutgoingAction

Outgoing Action for policy rule

Bitsr/w

Enumerated Values:

1	send_the_packet_to_the_mirror_port
2	send_the_packet_to_the_egress_port
3	send_the_matching_frames_to_the_egress_port
4	set_the_packets_VLAN_ID

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.15

policyMeteringEnable

Metering for Policy rule enabled/disabled.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.16

policyOutOfProfileAction

Out Of Profile Action for policy rule

Bitsr/w

Enumerated Values:

1	drop_the_packet
2	change_the_DSCP_value
3	set_Out_Drop_Precedence
4	do_not_drop_the_matching_frame_previously_marked_for_dropping

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.17

policyRowstatus

Row Status for policy rule

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.18

policyEgressPortList

Egress PortList for policy rule

IF-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex

.1.3.6.1.4.1.890.1.5.12.47.40.1.1.19

vlanCounterTable

table

.1.3.6.1.4.1.890.1.5.12.47.42.1 · 1 row entry · 24 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanCounterTable'

vlanCounterEntry row .1.3.6.1.4.1.890.1.5.12.47.42.1.1

An entry in vlanCounterTable.

Indexes

Column	Syntax	OID
vlanCounterTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.1`
vlanCounterRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.2`
vlanCounterTxMulticastPkts The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.3`
vlanCounterRxMulticastPkts The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.4`
vlanCounterTxBroadcastPkts The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.5`
vlanCounterRxBroadcastPkts The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.6`
vlanCounterTxTotalBytes The total number of packets size received.	BytesSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.7`
vlanCounterRxTotalBytes The total number of packets size received.	BytesSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.8`
vlanCounterTxPktsRate The number of packets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the Packets object.	Bs/sSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.9`
vlanCounterRxPktsRate The number of packets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the Packets object.	Bs/sSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.10`
vlanCounterTxPkts64Octets The total number of packets received that were 64 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.11`
vlanCounterRxPkts64Octets The total number of packets received that were 64 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.12`
vlanCounterTxPkts65to127Octets The total number of packets received that were between 65 and 127 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.13`
vlanCounterRxPkts65to127Octets The total number of packets received that were between 65 and 127 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.14`
vlanCounterTxPkts128to255Octets The total number of packets received that were between 128 and 255 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.15`
vlanCounterRxPkts128to255Octets The total number of packets received that were between 128 and 255 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.16`
vlanCounterTxPkts256to511Octets The total number of packets received that were between 256 and 511 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.17`
vlanCounterRxPkts256to511Octets The total number of packets received that were between 256 and 511 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.18`
vlanCounterTxPkts512to1023Octets The total number of packets received that were between 512 and 1023 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.19`
vlanCounterRxPkts512to1023Octets The total number of packets received that were between 512 and 1023 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.20`
vlanCounterTxPkts1024to1518Octets The total number of packets received that were between 1024 and 1518 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.21`
vlanCounterRxPkts1024to1518Octets The total number of packets received that were between 1024 and 1518 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.22`
vlanCounterTxPktsGiant The total number of packets received that were greater than 1518 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.23`
vlanCounterRxPktsGiant The total number of packets received that were greater than 1518 octets in length.	PacketsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.1.1.24`

switchCounterTable

table

.1.3.6.1.4.1.890.1.5.12.47.42.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk switchCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::switchCounterTable'

switchCounterEntry row .1.3.6.1.4.1.890.1.5.12.47.42.2.1

An entry in switchCounterTable.

Indexes

Column	Syntax	OID
switchUnknownUnicastCounter Unknown unicast counter for the port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.42.2.1.1`
switchtxratelimitdropcounter Rx Ratelimit drop counter.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.42.2.1.2`
switchrxratelimitdropcounter Tx Ratelimit drop counter.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.2.1.3`
switchrxmeterdropcounter Rx Metering drop counter.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.42.2.1.4`

vlanCounterResetTable

table

.1.3.6.1.4.1.890.1.5.12.47.42.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanCounterResetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanCounterResetTable'

vlanCounterResetEntry row .1.3.6.1.4.1.890.1.5.12.47.42.3.1

An entry in vlanCounterTable.

Indexes

Column Syntax OID

vlanCounterReset

Clear VLAN counters.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.42.3.1.1

rateLimitProfilePortTable

table

.1.3.6.1.4.1.890.1.5.12.47.43.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rateLimitProfilePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::rateLimitProfilePortTable'

rateLimitProfilePortEntry row .1.3.6.1.4.1.890.1.5.12.47.43.1.1

An entry in rateLimitProfilePortTable.

Indexes

Column	Syntax	OID
rateLimitPortProfile	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.43.1.1.1`

perQueueProfilePortTable

table

.1.3.6.1.4.1.890.1.5.12.47.43.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk perQueueProfilePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::perQueueProfilePortTable'

perQueueProfilePortEntry row .1.3.6.1.4.1.890.1.5.12.47.43.2.1

An entry in perQueueProfilePortTable.

Indexes

Column	Syntax	OID
perQueuePortProfile	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.43.2.1.1`

rateLimitProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.44.2 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rateLimitProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::rateLimitProfileTable'

rateLimitProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.44.2.1

An entry in rateLimitMaxNumberOfProfile.

Indexes

rateLimitProfileName

Column Syntax OID

rateLimitProfileName

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.1

rateLimitProfilePeakRate

Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.2

rateLimitProfileEgrRate

Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.

rateLimitProfileCommitRate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.3

Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.

rateLimitProfilePeakState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.4

Ingress peak rate limiting enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.5

rateLimitProfileEgrState

Egress rate limiting enabled/disabled on the port.

rateLimitProfileCommitState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.6

Ingress commit rate limiting enabled/disabled on the port.

rateLimitProfileRowStatus

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.7

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.44.2.1.8

perQueueProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.44.4 · 1 row entry · 18 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk perQueueProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::perQueueProfileTable'

perQueueProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.44.4.1

An entry in perQueueMaxNumberOfProfile.

Indexes

perQueueProfileName

Column Syntax OID

perQueueProfileName

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.1

perQueueProfileQ0CIR

Commit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.2

perQueueProfileQ0PIR

Peak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.3

perQueueProfileQ1CIR

Commit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.4

perQueueProfileQ1PIR

Peak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.5

perQueueProfileQ2CIR

Commit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.6

perQueueProfileQ2PIR

Peak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.7

perQueueProfileQ3CIR

Commit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.8

perQueueProfileQ3PIR

Peak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.9

perQueueProfileQ4CIR

Commit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.10

perQueueProfileQ4PIR

Peak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.11

perQueueProfileQ5CIR

Commit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.12

perQueueProfileQ5PIR

Peak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.13

perQueueProfileQ6CIR

Commit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.14

perQueueProfileQ6PIR

Peak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.15

perQueueProfileQ7CIR

Commit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.16

perQueueProfileQ7PIR

Peak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.17

perQueueProfileRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.44.4.1.18

vlanSecurityTable

table

.1.3.6.1.4.1.890.1.5.12.47.45.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanSecurityTable'

vlanSecurityEntry row .1.3.6.1.4.1.890.1.5.12.47.45.1.1

An entry in vlanSecurityTable.

Indexes

Column	Syntax	OID
vlanSecurityCount Number of (dynamic) MAC addresses that may be learned on the VID.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.45.1.1.1`

cfmLoopbackPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.46.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cfmLoopbackPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::cfmLoopbackPortTable'

cfmLoopbackPortEntry row .1.3.6.1.4.1.890.1.5.12.47.46.1.1

An entry in cfmLoopbackPortTable.

Indexes

Column Syntax OID

cfmLoopbackPortState

CFM loopback enabled/disabled on the port.

cfmLevel cfmVlanID cfmPort

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.46.1.1.1

cfmMIPTable

table

.1.3.6.1.4.1.890.1.5.12.47.46.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cfmMIPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::cfmMIPTable'

cfmMIPEntry row .1.3.6.1.4.1.890.1.5.12.47.46.2.1

An entry in cfmMIPTable.

Indexes

Column Syntax OID

cfmPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.46.2.1.1

cfmVlanID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.46.2.1.2

cfmLevel

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.46.2.1.3

cfmMIPRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.46.2.1.4

mrstpBridgeTable

table

.1.3.6.1.4.1.890.1.5.12.47.48.1.1 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mrstpBridgeTable'

mrstpBridgeEntry row .1.3.6.1.4.1.890.1.5.12.47.48.1.1.1

An entry in mrstpBridgeTable.

Indexes

mrstpBridgeIndex

Column Syntax OID

mrstpBridgeIndex

The tree index of the MRSTP.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.1

mrstpState

Enabled/disabled on the mrstp bridge.

mrstpProtocolSpecification

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.2

An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
fut…

Enumeration

Enumerated Values:

1	unknown
2	decLb100
3	ieee8021d

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.3

mrstpPriority

The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.4

mrstpTimeSinceTopologyChange

The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.

RFC1155-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.5

mrstpTopChanges

The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.6

mrstpDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originat…

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.7

mrstpRootCost

The cost of the path to the root as seen from
this bridge.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.8

mrstpRootPort

The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.9

mrstpMaxAge

The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.

BRIDGE-MIBTimeout

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.10

mrstpHelloTime

The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual v…

BRIDGE-MIBTimeout

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.11

mrstpHoldTime

This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.12

mrstpForwardDelay

This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Li…

BRIDGE-MIBTimeout

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.13

mrstpBridgeMaxAge

The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeHelloTime. The granularity of th…

BRIDGE-MIBTimeoutr/w

Constraints:
range: 600-4000

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.14

mrstpBridgeHelloTime

The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempte…

BRIDGE-MIBTimeoutr/w

Constraints:
range: 100-1000

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.15

mrstpBridgeForwardDelay

The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeMaxAge. The granularity o…

BRIDGE-MIBTimeoutr/w

Constraints:
range: 400-3000

.1.3.6.1.4.1.890.1.5.12.47.48.1.1.1.16

mrstpPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.48.1.2 · 1 row entry · 11 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mrstpPortTable'

A table that contains port-specific information
for the Spanning Tree Protocol.

mrstpPortEntry row .1.3.6.1.4.1.890.1.5.12.47.48.1.2.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

mrstpPort

Column Syntax OID

mrstpPort

The port number of the port for which this entry
contains Spanning Tree Protocol management
information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.1

mrstpPortPriority

The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
mrstpPort.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.2

mrstpPortState

The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will …

Enumeration

Enumerated Values:

1	disabled
2	blocking
3	listening
4	learning
5	forwarding
6	broken

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.3

mrstpPortEnable

The enabled/disabled status of the port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.4

mrstpPortPathCost

The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of t…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.5

mrstpPortDesignatedRoot

The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.6

mrstpPortDesignatedCost

The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.

mrstpPortDesignatedBridge

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.7

The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.

mrstpPortForwardTransitions

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.8

mrstpPortDesignatedPort

The Port Identifier of the port on the Designated
Bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.9

The number of times this port has transitioned
from the Learning state to the Forwarding state.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.10

mrstpPortOnBridgeIndex

Indetify the bridge index that this port joined to in MRSTP.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.48.1.2.1.11

dhcpSnpVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.49.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpSnpVlanTable'

dhcpSnpVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.49.1.1

Indexes

dhcpSnpVlanEntryVid

Column Syntax OID

dhcpSnpVlanEntryVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.49.1.1.1

dhcpSnpVlanEntryEnable

dhcpSnpVlanEntryOption82Enable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.49.1.1.2

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.49.1.1.3

dhcpSnpVlanEntryInfo

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.49.1.1.4

dhcpSnpVlanEntryRemoteID

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.49.1.1.5

dhcpSnpVlanEntrySPV

Tag option setting for DHCP snooping. private(0), SP(1), SV(2), PV(3), SPV(4).

Enumerationr/w

Enumerated Values:

0	private
1	sp
2	sv
3	pv
4	spv

.1.3.6.1.4.1.890.1.5.12.47.49.1.1.6

dhcpSnpVlanEntryDELIM

Delimiter setting for DHCP snooping. none(0), pound[#](1), semicolon[;](2), dot[.](3), comma[,](4), slash[/](5), space[ ](6).

Enumerationr/w

Enumerated Values:

0	none
1	pound
2	semicolon
3	dot
4	comma
5	slash
6	space

.1.3.6.1.4.1.890.1.5.12.47.49.1.1.7

dhcpSnpPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.49.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpSnpPortTable'

dhcpSnpPortEntry row .1.3.6.1.4.1.890.1.5.12.47.49.2.1

Indexes

dhcpSnpPortEntryPort

Column Syntax OID

dhcpSnpPortEntryPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.49.2.1.1

dhcpSnpPortEntryTrust

dhcpSnpBindEntryMac dhcpSnpBindEntryVid

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.49.2.1.2

dhcpSnpPortEntryRate

0 means unlimited

Integer32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.890.1.5.12.47.49.2.1.3

dhcpSnpBindTable

table

.1.3.6.1.4.1.890.1.5.12.47.49.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpBindTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpSnpBindTable'

dhcpSnpBindEntry row .1.3.6.1.4.1.890.1.5.12.47.49.3.1

Indexes

Column Syntax OID

dhcpSnpBindEntryMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.49.3.1.1

dhcpSnpBindEntryVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.49.3.1.2

dhcpSnpBindEntryIP

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.49.3.1.3

dhcpSnpBindEntryLease

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.49.3.1.4

dhcpSnpBindEntryType

Enumeration

Enumerated Values:

dynamic

.1.3.6.1.4.1.890.1.5.12.47.49.3.1.5

dhcpSnpBindEntryPort

ipsgEntryMac ipsgEntryVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.49.3.1.6

ipsgTable

table

.1.3.6.1.4.1.890.1.5.12.47.50.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipsgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::ipsgTable'

ipsgEntry row .1.3.6.1.4.1.890.1.5.12.47.50.1.1

Indexes

Column Syntax OID

ipsgEntryMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.50.1.1.1

ipsgEntryVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.50.1.1.2

ipsgEntryIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.50.1.1.3

ipsgEntryLease

second

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.50.1.1.4

ipsgEntryType

Enumeration

Enumerated Values:

1	static
2	dhcp

.1.3.6.1.4.1.890.1.5.12.47.50.1.1.5

ipsgEntryPort

0 means any port

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.50.1.1.6

ipsgEntryState

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.50.1.1.7

arpInspectVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.51.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::arpInspectVlanTable'

arpInspectVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.51.1.4.1

Indexes

arpInspectVlanVid

Column Syntax OID

arpInspectVlanVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.51.1.4.1.1

arpInspectVlanLog

Enumerationr/w

Enumerated Values:

1	all
2	none
3	permit
4	deny

.1.3.6.1.4.1.890.1.5.12.47.51.1.4.1.2

arpInspectVlanStatus

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.51.1.4.1.3

arpInspectPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.51.1.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::arpInspectPortTable'

arpInspectPortEntry row .1.3.6.1.4.1.890.1.5.12.47.51.1.5.1

Indexes

arpInspectPortIndex

Column Syntax OID

arpInspectPortIndex

arpInspectFilterMac arpInspectFilterVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.51.1.5.1.1

arpInspectPortTrust

Enumerationr/w

Enumerated Values:

1	trusted
2	untrusted

.1.3.6.1.4.1.890.1.5.12.47.51.1.5.1.2

arpInspectPortRate

Integer32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.890.1.5.12.47.51.1.5.1.3

arpInspectPortInterval

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.890.1.5.12.47.51.1.5.1.4

arpInspectFilterTable

table

.1.3.6.1.4.1.890.1.5.12.47.51.2.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::arpInspectFilterTable'

arpInspectFilterEntry row .1.3.6.1.4.1.890.1.5.12.47.51.2.3.1

Indexes

Column Syntax OID

arpInspectFilterMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.51.2.3.1.1

arpInspectFilterVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.51.2.3.1.2

arpInspectFilterPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.51.2.3.1.3

arpInspectFilterExpiry

arpInspectFilterRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.51.2.3.1.4

arpInspectFilterReason

Enumeration

Enumerated Values:

1	macVid
2	port
3	ip

.1.3.6.1.4.1.890.1.5.12.47.51.2.3.1.5

arpInspectLogMac arpInspectLogVid arpInspectLogPort arpInspectLogIp arpInspectLogReason

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.51.2.3.1.6

arpInspectLogTable

table

.1.3.6.1.4.1.890.1.5.12.47.51.2.4 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::arpInspectLogTable'

arpInspectLogEntry row .1.3.6.1.4.1.890.1.5.12.47.51.2.4.1

Indexes

Column Syntax OID

arpInspectLogMac

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.51.2.4.1.1

arpInspectLogVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.51.2.4.1.2

arpInspectLogPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.51.2.4.1.3

arpInspectLogIp

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.51.2.4.1.4

arpInspectLogNumPkt

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.51.2.4.1.5

arpInspectLogReason

Enumeration

Enumerated Values:

1	deny
2	denyStatic
3	denyDHCP
4	permitStatic
5	permitDHCP

.1.3.6.1.4.1.890.1.5.12.47.51.2.4.1.6

arpInspectLogTime

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.890.1.5.12.47.51.2.4.1.7

arpInspectStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.47.51.2.5 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::arpInspectStatisticsTable'

arpInspectStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.47.51.2.5.1

Indexes

arpInspectStatisticsVid

Column Syntax OID

arpInspectStatisticsVid

arpInspectStatisticsReceived

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.51.2.5.1.1

arpInspectStatisticsRequest

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.51.2.5.1.2

arpInspectStatisticsReply

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.51.2.5.1.3

arpInspectStatisticsForward

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.51.2.5.1.4

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.51.2.5.1.5

arpInspectStatisticsDrop

arpInspectStatisticsClear

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.51.2.5.1.6

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.51.2.5.1.7

trTCMPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.52.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk trTCMPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::trTCMPortTable'

trTCMPortEntry row .1.3.6.1.4.1.890.1.5.12.47.52.3.1

An entry in trTCMPortTable.

Indexes

Column Syntax OID

trTCMPortState

Two-rate three color marker enabled/disabled on the port.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.52.3.1.1

trTCMPortCIR

Allowed CIR in pkts/s.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.52.3.1.2

trTCMPortPIR

Allowed PIR in pkts/s.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.52.3.1.3

trTCMPortDscpGreen

0-63

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.52.3.1.4

trTCMPortDscpYellow

0-63

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.52.3.1.5

trTCMPortDscpRed

0-63

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.52.3.1.6

loopGuardPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.53.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopGuardPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::loopGuardPortTable'

loopGuardPortEntry row .1.3.6.1.4.1.890.1.5.12.47.53.2.1

An entry in loopGuardPortTable.

Indexes

Column Syntax OID

loopGuardPortState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.53.2.1.1

loopGuardPortMode

Specify loopguard mode for each port

Enumerationr/w

Enumerated Values:

1	fix
2	dynamic

.1.3.6.1.4.1.890.1.5.12.47.53.2.1.2

loopGuardPortRecoverTime

recover time to activate port in seconds.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.53.2.1.3

loopGuardStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.53.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopGuardStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::loopGuardStatusTable'

loopGuardStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.53.3.1

An entry in loopGuardStatusTable.

Indexes

subnetBasedVlanSrcIp subnetBasedVlanSrcMaskBit

Column	Syntax	OID
loopGuardStatusTxPkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.53.3.1.1`
loopGuardStatusRxPkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.53.3.1.2`
loopGuardStatusBadPkts	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.53.3.1.3`
loopGuardStatusShutdownTime	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.53.3.1.4`

subnetBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.54.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::subnetBasedVlanTable'

subnetBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.54.3.1

An entry in subnetBasedVlanTable.

Indexes

Column Syntax OID

subnetBasedVlanSrcIp

source ip for subnet-based vlan entry

subnetBasedVlanSrcMaskBit

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.54.3.1.1

source ip mask-bits for subnet-based vlan entry

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.47.54.3.1.2

subnetBasedVlanName

name for subnet-based vlan entry

subnetBasedVlanEntryState

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.12.47.54.3.1.3

subnetBasedVlanVid

vid for subnet-based vlan entry

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.54.3.1.4

subnetBasedVlanPriority

priority for subnet-based vlan entry

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.47.54.3.1.5

subnetBasedVlanInfoSrcIpType subnetBasedVlanInfoSrcIp subnetBasedVlanInfoSrcMaskBit

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.54.3.1.6

subnetBasedVlanInfoTable

table

.1.3.6.1.4.1.890.1.5.12.47.54.4 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::subnetBasedVlanInfoTable'

subnetBasedVlanInfoEntry row .1.3.6.1.4.1.890.1.5.12.47.54.4.1

An entry in subnetBasedVlanInfoTable.

Indexes

Column Syntax OID

subnetBasedVlanInfoSrcIpType

Ip type for subnet-based vlan entry

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.54.4.1.1

subnetBasedVlanInfoSrcIp

source ip of IPv4 or IPv6 for subnet-based vlan entry

subnetBasedVlanInfoSrcMaskBit

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.54.4.1.2

source ip mask-bits for subnet-based vlan entry

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.47.54.4.1.3

subnetBasedVlanInfoName

name for subnet-based vlan entry

subnetBasedVlanInfoPriority

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.12.47.54.4.1.4

subnetBasedVlanInfoVid

vid for subnet-based vlan entry

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.54.4.1.5

priority for subnet-based vlan entry

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.47.54.4.1.6

subnetBasedVlanInfoEntryState

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.54.4.1.7

macAuthenticationPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.55.5 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macAuthenticationPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::macAuthenticationPortTable'

macAuthenticationPortEntry row .1.3.6.1.4.1.890.1.5.12.47.55.5.1

An entry in macAuthenticationPortTable.

Indexes

macAuthenticationPortState

Column Syntax OID

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.55.5.1.1

mstMapTable

table

.1.3.6.1.4.1.890.1.5.12.47.56.20 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mstMapTable'

This table contains one entry for each instance of MSTP.

mstMapEntry row .1.3.6.1.4.1.890.1.5.12.47.56.20.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstMapIndex

Column Syntax OID

mstMapIndex

Uniquely identifies an instance. The entry of this table with index 0
presents always, represents CIST. When SET operation

MstiOrCistInstanceIndex

Type Constraints:
range: 0..16

Description:

This textual convention is an extension of the
MstiInstanceIndex convention. This extension permits the
additional value of zero, which means Common and Internal
Spanning Tree (CIST).

.1.3.6.1.4.1.890.1.5.12.47.56.20.1.1

mstMapVlans1k

A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.12.47.56.20.1.2

mstMapVlans2k

A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.12.47.56.20.1.3

mstMapVlans3k

A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.12.47.56.20.1.4

mstMapVlans4k

A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.12.47.56.20.1.5

mstMapRowStatus

mstpPortOperPointToPointMAC

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.56.20.1.6

mstVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.56.30 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mstVlanTable'

This table contains one entry for each VlanId.

mstVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.56.30.1

Information regarding the instance to which each Vlan is mapped.

Indexes

mstVlanIndex

Column	Syntax	OID
mstVlanIndex The VlanId for which this entry contains the instance mapped.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.890.1.5.12.47.56.30.1.1`
mstVlanMstIndex An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped	MstiOrCistInstanceIndex Type Constraints: `range: 0..16` Description: This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).	`.1.3.6.1.4.1.890.1.5.12.47.56.30.1.2`

mstpPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.56.40 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mstpPortTable'

A table that contains generic information about
every port that is associated with this bridge.

mstpPortEntry row .1.3.6.1.4.1.890.1.5.12.47.56.40.1

A list of information for each port of the
bridge.

Indexes

mstpPortIndex

Column Syntax OID

mstpPortIndex

A unique value, greater than zero, for each Port.
The value for each interface sub-layer
must remain constant at least from one re-initialization
of the entity's network management system to the next re-
initialization.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.12.47.56.40.1.1

mstpPortOperEdgePort

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.890.1.5.12.47.56.40.1.2

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.890.1.5.12.47.56.40.1.3

mstpXstTable

table

.1.3.6.1.4.1.890.1.5.12.47.56.50 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mstpXstTable'

mstpXstEntry row .1.3.6.1.4.1.890.1.5.12.47.56.50.1

Indexes

mstpXstId

Column	Syntax	OID
mstpXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: `range: 0..16` Description: This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).	`.1.3.6.1.4.1.890.1.5.12.47.56.50.1.1`
mstpXstBridgePriority Bridge priority, in steps of 4096.	Integer32r/w Constraints: `range: 0-61440`	`.1.3.6.1.4.1.890.1.5.12.47.56.50.1.2`
mstpXstBridgeId .	BRIDGE-MIBBridgeId Type Constraints: `range: 8`	`.1.3.6.1.4.1.890.1.5.12.47.56.50.1.3`
mstpXstInternalRootCost .	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.56.50.1.4`
mstpXstRootPort .	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.56.50.1.5`
mstpXstTimeSinceTopologyChange .	RFC1155-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.56.50.1.6`
mstpXstTopologyChangesCount .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.56.50.1.7`

mstpXstPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.56.60 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mstpXstPortTable'

mstpXstPortEntry row .1.3.6.1.4.1.890.1.5.12.47.56.60.1

Indexes

mstpXstPortXstId mstpXstPortIndex

Column Syntax OID

mstpXstPortXstId

0 means CIST.

MstiOrCistInstanceIndex

Type Constraints:
range: 0..16

Description:

This textual convention is an extension of the
MstiInstanceIndex convention. This extension permits the
additional value of zero, which means Common and Internal
Spanning Tree (CIST).

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.1

mstpXstPortIndex

The value of mstpPortIndex of the Port
in mstpPortTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.2

mstpXstPortEnable

mstpXstPortDesignatedRoot

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.3

mstpXstPortPriority

Port priority, in steps of 16.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.4

mstpXstPortPathCost

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.5

mstpXstPortState

Enumeration

Enumerated Values:

0	disabled
1	discarding
2	learning
3	forwarding
4	unknown

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.6

mstpXstPortDesignatedCost

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.7

mstpXstPortDesignatedBridge

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.8

mstpXstPortDesignatedPort

Type Constraints:
range: 8

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.9

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.56.60.1.10

radiusAuthServerTable

table

.1.3.6.1.4.1.890.1.5.12.47.57.1.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::radiusAuthServerTable'

radiusAuthServerEntry row .1.3.6.1.4.1.890.1.5.12.47.57.1.3.1

An entry in radiusAuthServerTable.

Indexes

radiusAuthServerIndex

Column Syntax OID

radiusAuthServerIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.57.1.3.1.1

radiusAuthServerIpAddr

IPv4 only

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.57.1.3.1.2

radiusAuthServerUdpPort

radiusAuthServerSharedSecret

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.57.1.3.1.3

radiusAuthServerIpAddressType

.1.3.6.1.4.1.890.1.5.12.47.57.1.3.1.4

radiusAuthServerIpAddress

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.57.1.3.1.5

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.57.1.3.1.6

radiusAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.47.57.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::radiusAcctServerTable'

radiusAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.47.57.2.2.1

An entry in radiusAcctServerTable.

Indexes

radiusAcctServerIndex

Column Syntax OID

radiusAcctServerIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.57.2.2.1.1

radiusAcctServerIpAddr

IPv4 only

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.57.2.2.1.2

radiusAcctServerUdpPort

radiusAcctServerSharedSecret

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.57.2.2.1.3

radiusAcctServerIpAddressType

.1.3.6.1.4.1.890.1.5.12.47.57.2.2.1.4

radiusAcctServerIpAddress

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.57.2.2.1.5

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.57.2.2.1.6

tacacsAuthServerTable

table

.1.3.6.1.4.1.890.1.5.12.47.58.1.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::tacacsAuthServerTable'

tacacsAuthServerEntry row .1.3.6.1.4.1.890.1.5.12.47.58.1.3.1

An entry in tacacsAuthServerTable.

Indexes

tacacsAuthServerIndex

Column Syntax OID

tacacsAuthServerIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.58.1.3.1.1

tacacsAuthServerIpAddr

IPv4 only

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.58.1.3.1.2

tacacsAuthServerTcpPort

tacacsAuthServerSharedSecret

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.58.1.3.1.3

tacacsAuthServerIpAddressType

.1.3.6.1.4.1.890.1.5.12.47.58.1.3.1.4

tacacsAuthServerIpAddress

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.58.1.3.1.5

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.58.1.3.1.6

tacacsAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.47.58.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::tacacsAcctServerTable'

tacacsAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.47.58.2.2.1

An entry in tacacsAcctServerTable.

Indexes

tacacsAcctServerIndex

Column Syntax OID

tacacsAcctServerIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.58.2.2.1.1

tacacsAcctServerIpAddr

IPv4 only

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.58.2.2.1.2

tacacsAcctServerTcpPort

tacacsAcctServerSharedSecret

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.58.2.2.1.3

tacacsAcctServerIpAddressType

.1.3.6.1.4.1.890.1.5.12.47.58.2.2.1.4

tacacsAcctServerIpAddress

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.47.58.2.2.1.5

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.58.2.2.1.6

authenticationTypeTable

table

.1.3.6.1.4.1.890.1.5.12.47.59.1.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authenticationTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::authenticationTypeTable'

authenticationTypeEntry row .1.3.6.1.4.1.890.1.5.12.47.59.1.1.1

An entry in authenticationTypeTable.

Indexes

authenticationTypeName

Column	Syntax	OID
authenticationTypeName	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.59.1.1.1.1`
authenticationTypeMethodList Enable-local: 1, Login-local: 2, radius: 3, tacacs+: 4	OctetStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.59.1.1.1.2`

accountingTypeTable

table

.1.3.6.1.4.1.890.1.5.12.47.59.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accountingTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::accountingTypeTable'

accountingTypeEntry row .1.3.6.1.4.1.890.1.5.12.47.59.2.2.1

An entry in accountingTypeTable.

Indexes

accountingTypeName

Column Syntax OID

accountingTypeName

.1.3.6.1.4.1.890.1.5.12.47.59.2.2.1.1

accountingTypeActive

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.59.2.2.1.2

accountingTypeBroadcast

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.59.2.2.1.3

accountingTypeMode

Enumerationr/w

Enumerated Values:

1	start_stop
2	stop_only
255	not_available

.1.3.6.1.4.1.890.1.5.12.47.59.2.2.1.4

accountingTypeMethod

Enumerationr/w

Enumerated Values:

1	radius
2	tacacs

.1.3.6.1.4.1.890.1.5.12.47.59.2.2.1.5

accountingTypePrivilege

Enumerationr/w

Enumerated Values:

0	privilege_0
1	privilege_1
2	privilege_2
3	privilege_3
4	privilege_4
5	privilege_5
6	privilege_6
7	privilege_7
8	privilege_8
9	privilege_9
10	privilege_10
11	privilege_11
12	privilege_12
13	privilege_13
14	privilege_14
255	not_available

.1.3.6.1.4.1.890.1.5.12.47.59.2.2.1.6

xdsl2ExtLineTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.1.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtLineTable'

The table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product.

xdsl2ExtLineEntry row .1.3.6.1.4.1.890.1.5.12.47.60.1.1.1

The table xdsl2ExtLineTable contains extra functions besides those in
xdsl2LineTable.

Indexes

VDSL2-LINE-TC-MIBXdsl2LineLdsfr/w

Column Syntax OID

xdsl2LineCmndConfSelt

Trigger a SELT(Single End Loop Test) for the line. Note the loop
should be open.

Type Values:

0	inhibit
1	force

.1.3.6.1.4.1.890.1.5.12.47.60.1.1.1.1

xdsl2ExtLineBandTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtLineBandTable'

The table xdsl2ExtLineBandTable extends xdsl2LineBandTable for 
ZyXEL product.

xdsl2ExtLineBandEntry row .1.3.6.1.4.1.890.1.5.12.47.60.1.2.1

The table xdsl2ExtLineBandTable contains extra per-band line
status parameters besides those in xdsl2LineBandTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2LineBand

Column	Syntax	OID
xdsl2LineBandStatusActAtp Actual Aggregate Transmit Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.	0.1 dBmInteger32 Constraints: `range: -310-310` `range: 2147483647-2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.1.2.1.1`
xdsl2LineBandStatusActRxPwr Actual Aggregate Receive Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.	0.1 dBmInteger32 Constraints: `range: -255-255` `range: 2147483647-2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.1.2.1.2`

xdsl2ExtSeltUerTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltUerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSeltUerTable'

The table xdsl2ExtSeltUerTable extends xdsl2LineTable for ZyXEL product.

xdsl2ExtSeltUerEntry row .1.3.6.1.4.1.890.1.5.12.47.60.1.3.1

The table xdsl2ExtSeltUerTable contains extra functions besides those in
xdsl2LineTable.

Indexes

xdsl2ExtSeltUerMeasureTone

Column Syntax OID

xdsl2ExtSeltUerDuration

The measure duration of SELT(Single End Loop Test) UER for the line. the range from 1 to 255.
Note the loop should be open.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.890.1.5.12.47.60.1.3.1.1

xdsl2ExtSeltUerAgcGain

The AGC Gain setting of SELT(Single End Loop Test) UER for the line. the range from 0 to 32.
0 means auto, chip will assign a value automatic. Note the loop should be open.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.12.47.60.1.3.1.2

The measure tones of SELT QLN for the line. 1 means 1024, 2 means 2048, 3 means 3072 and
4 means SELT QLN will measure 4096 tones. Note the loop should be open.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.890.1.5.12.47.60.1.3.1.3

xdsl2ExtSeltUerAction

Trigger a SELT(Single End Loop Test)UER for the line. Note the loop
should be open.

VDSL2-LINE-TC-MIBXdsl2LineLdsfr/w

Type Values:

0	inhibit
1	force

.1.3.6.1.4.1.890.1.5.12.47.60.1.3.1.4

xdsl2ExtSeltQlnTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltQlnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSeltQlnTable'

The table xdsl2ExtSeltQlnTable extends xdsl2LineTable for ZyXEL product.

xdsl2ExtSeltQlnEntry row .1.3.6.1.4.1.890.1.5.12.47.60.1.4.1

The table xdsl2ExtSeltQlnTable contains extra functions besides those in
xdsl2LineTable.

Indexes

xdsl2ExtSeltQlnMeasurementTone

Column Syntax OID

xdsl2ExtSeltQlnDuration

The measure duration of SELT QLN for the line. the range from 0 to 15.
The measurement is performed over a period equal to 2^measure_duration DMT signals.
A value of 12 corresponds approximately to one second. Note the …

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.890.1.5.12.47.60.1.4.1.1

The measure tones of SELT QLN for the line. 1 means 1024, 2 means 2048, 3 means 3072 and
4 means SELT QLN will measure 4096 tones. Note the loop should be open.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.890.1.5.12.47.60.1.4.1.2

xdsl2ExtSeltQlnAction

Trigger a SELT(Single End Loop Test)QLN for the line. Note the loop
should be open. If the line was in show-time, performance the SELT QLN will
cause it link down.

VDSL2-LINE-TC-MIBXdsl2LineLdsfr/w

Type Values:

0	inhibit
1	force

.1.3.6.1.4.1.890.1.5.12.47.60.1.4.1.3

xdsl2ExtLineSegmentTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineSegmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtLineSegmentTable'

The table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for 
ZyXEL product.

xdsl2ExtLineSegmentEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.1.1

The table xdsl2LineExtSegmentEntry contains extra line segment
status parameters besides those in xdsl2LineSegmentTable.

This table stores HLOG/QLN/SNR measured during initialization.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2LineSegmentDirection VDSL2-LINE-MIBxdsl2LineSegment

Column Syntax OID

xdsl2LineSegmentLog

This parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentLog.

dBOctetString

Constraints:
range: 0-1024

.1.3.6.1.4.1.890.1.5.12.47.60.2.1.1.1

xdsl2LineSegmentQln

This parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentQln.

dBm/HzOctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.890.1.5.12.47.60.2.1.1.2

xdsl2LineSegmentSnr

This parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentSnr.

0.5 dBOctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.890.1.5.12.47.60.2.1.1.3

xdsl2LineSegmentStatus

This parameter indicates whether the Hlog/Qln/Snr data is ready.

Bits

Enumerated Values:

0	hlogReady
1	qlnReady
2	snrReady

.1.3.6.1.4.1.890.1.5.12.47.60.2.1.1.4

xdsl2LineSegmentLogScGroupSize

Number of subcarriers per group used to report the H(f)
logarithmic representation values for the respective
transmission direction. The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for …

Unsigned32

Constraints:
range: 1-2
range: 4-4
range: 8-8

.1.3.6.1.4.1.890.1.5.12.47.60.2.1.1.5

xdsl2LineSegmentQlnScGroupSize

Number of subcarriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
eq…

Unsigned32

Constraints:
range: 1-2
range: 4-4
range: 8-8

.1.3.6.1.4.1.890.1.5.12.47.60.2.1.1.6

xdsl2LineSegmentSnrScGroupSize

Number of subcarriers per group used to report the SNR values
on the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the siz…

Unsigned32

Constraints:
range: 1-2
range: 4-4
range: 8-8

.1.3.6.1.4.1.890.1.5.12.47.60.2.1.1.7

xdsl2ExtChannelStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChannelStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtChannelStatusTable'

The table xdsl2ExtChannelStatusTable extends xdsl2ChannelStatusTable for 
ZyXEL product.

xdsl2ExtChannelStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.2.1

The table xdsl2ExtChannelStatusTable contains extra subcarrier
status parameters besides those in xdsl2ChannelStatusTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2ChStatusUnit

Column Syntax OID

xdsl2ChannelStatusActualRaMode

The actual RA mode.
The possible values are:
fixedRateMode(1) - Fixed rate mode
raInit(2) - Adaptive rate mode at initialization
dynamicRa(3) - Dynamic rate adaptation
sosEnabled(4) - SOS enabled

Xdsl2StatusActualRaMode

Type Values:

0	none
1	fixedRateMode
2	raInit
3	dynamicRa
4	sosEnabled

Description:

fixedRateMode(1) - Fixed rate mode
raInit(2) - Adaptive rate mode at initialization
dynamicRa(3) - Dynamic rate adaptation
sosEnabled(4) - SOS enabled

.1.3.6.1.4.1.890.1.5.12.47.60.2.2.1.1

xdsl2ChannelStatusRetransmissionMode

RTX_USED operational data parameter.
The possible values are:
rtxInUse(1) - RTX in use.
rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN.
rtxNotSupportedXtuC(3) - RTX not in use beca…

Xdsl2StatusRtxMode

Type Values:

0	none
1	rtxInUse
2	rtxForbidden
3	rtxNotSupportedXtuC
4	rtxNotSupportedXtuR
5	rtxNotSupportedBoth

Description:

rtxInUse(1) - RTX in use.
rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN.
rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C.
rtxNotSupportedXtuR(4) - RTX n…

.1.3.6.1.4.1.890.1.5.12.47.60.2.2.1.2

xdsl2ChannelStatusRetransmissionOverhead

Expected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps.

kbpsUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.2.2.1.3

xdsl2ChannelStatusGinpFramingType

This parameter is equal to zero if G.inp is
not enabled. If G.inp is enabled, it reports
the framing type in use (1, 2, 3, or 4).

Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.2.2.1.4

xdsl2ChannelStatusActualInpAgainstREIN

This parameter reports the actual INP against REIN noise. Unit is 1/2 symbol.

1/2 symbolUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.2.2.1.5

xdsl2ChannelStatusReedSolomonCodeWordPerDtu

This parameter reports the number of RS codewords per DTU.
It is equal to D when PhyR is enabled.

Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.2.2.1.6

xdsl2ExtSCStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSCStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSCStatusTable'

The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for 
ZyXEL product.

xdsl2ExtSCStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.3.1

The table xdsl2ExtSCStatusTable contains extra subcarrier
status parameters besides those in xdsl2SCStatusTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusDirection

Column	Syntax	OID
xdsl2SCStatusActAtp Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical va…	0.1 dBmInteger32 Constraints: `range: -310-310` `range: 2147483647-2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.3.1.1`

xdsl2ExtSCStatusBandTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.4 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSCStatusBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSCStatusBandTable'

The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for 
ZyXEL product.

xdsl2ExtSCStatusBandEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.4.1

The table xdsl2ExtSCStatusBandTable contains extra subcarrier
status parameters that are grouped per-band besides those in
xdsl2SCStatusBandTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusBand

Column	Syntax	OID
xdsl2SCStatusBandSnrMargin SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for a…	0.1 dBInteger32 Constraints: `range: -640-630` `range: 2147483646-2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.4.1.1`

xdsl2ExtSeltStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.6 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSeltStatusTable'

The table xdsl2ExtSeltStatusTable contains SELT status.

xdsl2ExtSeltStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.6.1

The table xdsl2ExtSeltStatusEntry contains SELT status.

Indexes

IF-MIBifIndex xdsl2SeltReflection

Column	Syntax	OID
xdsl2SeltStatusLineType	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.60.2.6.1.2`
xdsl2SeltStatusLineLength	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.6.1.3`

xdsl2ExtSeltReflectionStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.7 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltReflectionStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSeltReflectionStatusTable'

The table xdsl2ExtSeltReflectionStatusTable contains SELT status 
for each reflection.

xdsl2ExtSeltReflectionStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.7.1

The table xdsl2ExtSeltReflectionStatusTable contains SELT status
for each reflection.

Indexes

Column	Syntax	OID
xdsl2SeltReflection	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.7.1.1`
xdsl2SeltDelay	0.1Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.7.1.2`
xdsl2SeltError	0.1Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.7.1.3`
xdsl2SeltAtn180kHz	0.1Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.7.1.4`
xdsl2SeltAtn300kHz	0.1Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.7.1.5`
xdsl2SeltFitError	0.1Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.7.1.6`
xdsl2SeltFitTermination	0.2Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.7.1.7`

xdsl2ExtSeltUerStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.8 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltUerStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSeltUerStatusTable'

The table xdsl2ExtSeltUerStatusTable contains SELT UER status for each tones.

xdsl2ExtSeltUerStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.8.1

The table xdsl2ExtSeltUerStatusTable contains SELT UER status for each tones.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusSegment

Column Syntax OID

xdsl2ExtSeltUerSegment

The segment of the subcarriers status information provided by
this row.
Several status parameters in this table are retrieved in segments.
The first segment of the status information is retrieved with
xdsl2SCStatusSegme…

Unsigned32

Constraints:
range: 1-8

.1.3.6.1.4.1.890.1.5.12.47.60.2.8.1.1

xdsl2ExtSeltUerStatus

Enumeration

Enumerated Values:

0	idle
1	inProgress
2	failed
3	done

.1.3.6.1.4.1.890.1.5.12.47.60.2.8.1.2

xdsl2ExtSeltUerSegmentEchoReal

An array of up to 4096 tones.
It is designed to support up to 4096 subcarriers for SELT UER real part in the range (-2^15+1) to (+2^15-1).
A special value -2^15 indicates that no measurement could be done for the subca…

OctetString

Constraints:
range: 0-4096

.1.3.6.1.4.1.890.1.5.12.47.60.2.8.1.3

xdsl2ExtSeltUerSegmentEchoImg

An array of up to 4096 tones.
It is designed to support up to 4096 subcarriers for SELT UER imaginary part in the range (-2^15+1) to (+2^15-1).
A special value -2^15 indicates that no measurement could be done for the…

OctetString

Constraints:
range: 0-4096

.1.3.6.1.4.1.890.1.5.12.47.60.2.8.1.4

xdsl2ExtSeltUerSegmentEchoExp

An array of up to 4096 tones.
It is designed to support up to 4096 subcarriers for SELT UER exponent element. A special value 1023 indicates that
no measurement could be done for the subcarrier.Each value in this array…

OctetString

Constraints:
range: 0-4096

.1.3.6.1.4.1.890.1.5.12.47.60.2.8.1.5

xdsl2ExtSeltUerSegmentTotalRxGain

To performance the measurment of SELT need repetitive 4 times. The array to record total Rx gain for each time.
A special value 1023 indicates that no measurement could be done.
Each value in this array is 16 bits wide

0.01 dBOctetString

Constraints:
range: 0-3

.1.3.6.1.4.1.890.1.5.12.47.60.2.8.1.6

xdsl2ExtSeltUerSegmentAnalogRxGain

To performance the measurment of SELT need repetitive 4 times. The array to record analog Rx gain for each time.
A special value 1023 indicates that no measurement could be done.
Each value in this array is 16 bits wide

0.01 dBOctetString

Constraints:
range: 0-3

.1.3.6.1.4.1.890.1.5.12.47.60.2.8.1.7

xdsl2ExtSeltQlnStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.2.9 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltQlnStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtSeltQlnStatusTable'

The table xdsl2ExtSeltQlnStatusTableTable contains SELT Qln status 
for each tones.

xdsl2ExtSeltQlnStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.60.2.9.1

The table xdsl2ExtSeltQlnStatusTable contains SELT UER status for each tones.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLCurrUnit

Column	Syntax	OID
xdsl2ExtSeltQlnSegmentQln An array of up to 4096 tones . It is designed to support up to 4096 subcarriers for real Quiet Line Noise values in dBm/Hz. The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n…	dBm/HzOctetString Constraints: `range: 0-4096`	`.1.3.6.1.4.1.890.1.5.12.47.60.2.9.1.2`

xdsl2ExtPMLineCurrTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1 · 1 row entry · 29 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtPMLineCurrTable'

The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.

xdsl2ExtPMLineCurrEntry row .1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1

The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.

Indexes

Column	Syntax	OID
xdsl2PMLSinceLinkFecs Count of seconds since last link up that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.1`
xdsl2PMLSinceLinkEs Count of seconds since last link up that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RD…	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.2`
xdsl2PMLSinceLinkSes Count of seconds since last link up that that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE anomalies in one or m…	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.3`
xdsl2PMLSinceLinkLoss Count of seconds since last link up that there was LOS (or LOS-FE for xTU-R).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.4`
xdsl2PMLSinceLinkUas Count of seconds in Unavailability State since last line up. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.5`
xdsl2PMLSinceLinkLofs Count of seconds since last link up that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.6`
xdsl2PMLSinceLinkLol Count of times the line loss of link since last link up.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.7`
xdsl2PMLSinceLinkLols Count of seconds since last link up that there was Loss of Link .	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.8`
xdsl2PMLSinceLinkLpr Count of the line loss of power since last link up.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.9`
xdsl2PMLSinceLinkLprs Count of seconds since last link up that there was Loss of Power .	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.10`
xdsl2PMLCurr15MLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.11`
xdsl2PMLCurr15MLol Count of times during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.12`
xdsl2PMLCurr15MLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.13`
xdsl2PMLCurr15MLpr Count of times during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.14`
xdsl2PMLCurr15MLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.15`
xdsl2PMLCurr1DayLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.16`
xdsl2PMLCurr1DayLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.17`
xdsl2PMLCurr1DayLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.18`
xdsl2PMLCurr1DayLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.19`
xdsl2PMLCurr1DayLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.20`
xdsl2PMLSinceLinkInmEqInp The INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of t…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.21`
xdsl2PMLSinceLinkInmIAT The INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the parti…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.22`
xdsl2PMLSinceLinkInmME The INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	symbolsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.23`
xdsl2PMLCurr15MInmEqInp The INM Equivalent Inp histogram during this 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular inde…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.24`
xdsl2PMLCurr15MInmIAT The INM Inter Arrival Time histogram during this 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of t…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.25`
xdsl2PMLCurr15MInmME The INM total measurement during this 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.26`
xdsl2PMLCurr1DayInmEqInp The INM Equivalent Inp histogram during this 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular ind…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.27`
xdsl2PMLCurr1DayInmIAT The INM Inter Arrival Time histogram during this 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of th…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.28`
xdsl2PMLCurr1DayInmME The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.1.1.29`

xdsl2ExtPMLineHist15MinTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3 · 1 row entry · 13 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineHist15MinTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtPMLineHist15MinTable'

The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.

xdsl2ExtPMLineHist15MinEntry row .1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1

The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLHist15MUnit VDSL2-LINE-MIBxdsl2PMLHist15MInterval

Column	Syntax	OID
xdsl2PMLHist15MLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.1`
xdsl2PMLHist15MLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.2`
xdsl2PMLHist15MLols Count of seconds during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.3`
xdsl2PMLHist15MLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.4`
xdsl2PMLHist15MLprs Count of seconds during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.5`
xdsl2PMLHist15MInmEqInp The INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index o…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.6`
xdsl2PMLHist15MInmIAT The INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the pa…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.7`
xdsl2PMLHist15MInmME The INM total measurement during 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.8`
xdsl2PMLHist15MSnrmAvgUsDs Count of margin during this interval that there was average SNR margin.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.9`
xdsl2PMLHist15MSnrmU0D1 Count of margin during this interval that there was SNR margin of U0/D1 band. Values range from -640 to 630 in units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indic…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.10`
xdsl2PMLHist15MSnrmU1D2 Count of margin during this interval that there was SNR margin of U1/D2 band. Values range from -640 to 630 in units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indic…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.11`
xdsl2PMLHist15MSnrmU2D3 Count of margin during this interval that there was SNR margin of U2/D3 band. Values range from -640 to 630 in units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indic…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.12`
xdsl2PMLHist15MSnrmU3D4 Count of margin during this interval that there was SNR margin of U3/D4 band. Values range from -640 to 630 in units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indic…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.3.1.13`

xdsl2ExtPMLineHist1DayTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineHist1DayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtPMLineHist1DayTable'

The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.

xdsl2ExtPMLineHist1DayEntry row .1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1

The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLHist1DUnit VDSL2-LINE-MIBxdsl2PMLHist1DInterval

Column	Syntax	OID
xdsl2PMLHist1DLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.1`
xdsl2PMLHist1DLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.2`
xdsl2PMLHist1DLols Count of seconds during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.3`
xdsl2PMLHist1DLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.4`
xdsl2PMLHist1DLprs Count of seconds during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.5`
xdsl2PMLHist1DInmEqInp The INM Equivalent Inp histogram during 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.6`
xdsl2PMLHist1DInmIAT The INM Inter Arrival Time histogram during 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the par…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.7`
xdsl2PMLHist1DInmME The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.1.4.1.8`

xdsl2ExtPMChCurrTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1 · 1 row entry · 23 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtPMChCurrTable'

The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.

xdsl2ExtPMChCurrEntry row .1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1

The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChCurrUnit

Column	Syntax	OID
xdsl2PMChSinceLinkUncorrectedCWs Count of codewords that could not be corrected since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.1`
xdsl2PMChCurr15MUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.2`
xdsl2PMChCurr1DayUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.3`
xdsl2PMChSinceLinkCodingViolations Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.4`
xdsl2PMChSinceLinkCorrectedBlocks Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.5`
xdsl2PMChSinceLinkRtx Number of codewords retransmitted since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.6`
xdsl2PMChCurr15MRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.7`
xdsl2PMChCurr1DayRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.8`
xdsl2PMChSinceLinkRtxCorrected Number of codewords corrected through retransmission since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.9`
xdsl2PMChCurr15MRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.10`
xdsl2PMChCurr1DayRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.11`
xdsl2PMChSinceLinkRtxUncorrected Number of codewords left uncorrected after retransmission since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.12`
xdsl2PMChCurr15MRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.13`
xdsl2PMChCurr1DayRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.14`
xdsl2PMChSinceLinkLEFTRs Low Error-Free Throughput Rate Seconds since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.15`
xdsl2PMChCurr15MLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.16`
xdsl2PMChCurr1DayLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.17`
xdsl2PMChSinceLinkMinEFTR Lowest EFTR observed since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.18`
xdsl2PMChCurr15MMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.19`
xdsl2PMChCurr1DayMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.20`
xdsl2PMChSinceLinkErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) since last link up.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.21`
xdsl2PMChCurr15MErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.22`
xdsl2PMChCurr1DayErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.1.1.23`

xdsl2ExtPMChHist15MinTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChHist15MinTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtPMChHist15MinTable'

The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.

xdsl2ExtPMChHist15MinEntry row .1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1

The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChHist15MUnit VDSL2-LINE-MIBxdsl2PMChHist15MInterval

Column	Syntax	OID
xdsl2PMChHist15MUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1.1`
xdsl2PMChHist15MRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1.2`
xdsl2PMChHist15MRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1.3`
xdsl2PMChHist15MRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1.4`
xdsl2PMChHist15MLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1.5`
xdsl2PMChHist15MMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1.6`
xdsl2PMChHist15MErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.2.1.7`

xdsl2ExtPMChHist1DTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChHist1DTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtPMChHist1DTable'

The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.

xdsl2ExtPMChHist1DEntry row .1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1

The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChHist1DUnit VDSL2-LINE-MIBxdsl2PMChHist1DInterval

Column	Syntax	OID
xdsl2PMChHist1DayUncorrectedCWs Count of codewords that could not be corrected since during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1.1`
xdsl2PMChHist1DayRtx Number of codewords retransmitted during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1.2`
xdsl2PMChHist1DayRtxCorrected Number of codewords corrected through retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1.3`
xdsl2PMChHist1DayRtxUncorrected Number of codewords left uncorrected after retransmission during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1.4`
xdsl2PMChHist1DayLEFTRs Low Error-Free Throughput Rate Seconds during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1.5`
xdsl2PMChHist1DayMinEFTR Lowest EFTR observed in the current interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1.6`
xdsl2PMChHist1DayErrFreeBits The number of bits belonging to correct DTUs leaving the Rx PMS-TC ?? 2(?V16) during this interval.	Unsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.4.2.3.1.7`

xdsl2ExtLineConfTemplateTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineConfTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtLineConfTemplateTable'

The table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.

xdsl2ExtLineConfTemplateEntry row .1.3.6.1.4.1.890.1.5.12.47.60.5.1.1.1

TThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.

Indexes

VDSL2-LINE-MIBxdsl2LConfTempTemplateName

Column	Syntax	OID
xdsl2LConfTempPortList A port list that indicates which ports this template applys for.	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.1.1.1`
xdsl2LConfTempInmConfProfile The value of this object identifies the row in the VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table, (xdsl2ExtInmConfProfTable) that applies for this DSL line.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: `range: 1-32`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.1.1.2`

xdsl2ExtLineConfProfTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2 · 1 row entry · 19 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineConfProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtLineConfProfTable'

The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.

xdsl2ExtLineConfProfEntry row .1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1

The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.

Indexes

VDSL2-LINE-MIBxdsl2LConfProfProfileName

Column	Syntax	OID
xdsl2LConfProfBitSwapDs This configuration parameter indicates if the use of bitswap is disabled on downstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.1`
xdsl2LConfProfBitSwapUs This configuration parameter indicates if the use of bitswap is disabled on upstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.2`
xdsl2LConfProfPortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.3`
xdsl2LConfProfSosTimeDs The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value co…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.4`
xdsl2LConfProfSosTimeUs The parameter SOS-TIME-u s is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value c…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.5`
xdsl2LConfProfSosCrcDs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in th…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.6`
xdsl2LConfProfSosCrcUs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in th…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.7`
xdsl2LConfProfSosNToneDs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.8`
xdsl2LConfProfSosNToneUs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.9`
xdsl2LConfProfSosMaxDs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall t…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.10`
xdsl2LConfProfSosMaxUs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall t…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.11`
xdsl2LConfProfRocEnableDs Enable the robust overhead channel. disable(0), enable(1)	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.14`
xdsl2LConfProfRocEnableUs Enable the robust overhead channel. disable(0), enable(1)	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.15`
xdsl2LConfProfRocSnrmDs The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization policy (see 12.3.7.1/G.993.2). The valid ran…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.16`
xdsl2LConfProfRocSnrmUs The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization policy (see 12.3.7.1/G.993.2). The valid ran…	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.17`
xdsl2LConfProfRocMinInpDs This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.18`
xdsl2LConfProfRocMinInpUs This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.19`
xdsl2LConfProfDynamicDepthDs This configuration parameter indicates if the use of Dynamic Depth is disabled on downstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.20`
xdsl2LConfProfDynamicDepthUs This configuration parameter indicates if the use of Dynamic Depth is disabled on upstream direction. The possible values are: disable(0), enable(1)	Unsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.1.2.1.21`

xdsl2ExtInmConfProfTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7 · 1 row entry · 11 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtInmConfProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtInmConfProfTable'

xdsl2ExtInmConfProfTable.

xdsl2ExtInmConfProfEntry row .1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1

xdsl2ExtInmConfProfTable.

Indexes

xdsl2ExtInmConfProfProfileName

Column Syntax OID

xdsl2ExtInmConfProfProfileName

This object identifies a row in this table.

SNMP-FRAMEWORK-MIBSnmpAdminString

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.1

xdsl2ExtInmConfProfVtucInpEq

The INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM_INPEQ_MODE defines the way of
computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2
11.4.2.2.1
This takes a value in the ran…

Unsigned32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.2

xdsl2ExtInmConfProfVturInpEq

Unsigned32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.3

xdsl2ExtInmConfProfVtucCC

The INM Cluster Continuation. The valid values for INMCC range
from 0 from 64 DMT symbols in steps of 1 DMT symbol.
Up to and including INMCC nondegraded symbols will be allowed before
a cluster is deemed to be comp…

xdsl2ExtInmConfProfVturCC

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.4

xdsl2ExtInmConfProfVtucIATO

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.5

The INM Inter Arrival Time Offset for the IAT anomaly generation.
The valid values for INMIATO range from 3 from 511 DMT symbols in steps
of 1 DMT symbol.

xdsl2ExtInmConfProfVturIATO

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.6

The INM Inter Arrival Time Offset for the IAT anomaly generation.
The valid values for INMIATO range from 3 from 511 DMT symbols in steps
of 1 DMT symbol.

xdsl2ExtInmConfProfVtucIATS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.7

The INM Inter Arrival Time Step for the IAT anomaly generation.
The valid values for INMIATS range from 0 from 7 in steps. The range of
values of inter-arrival times recorded in a single bin is 2^(INMIATS).
All inter-…

xdsl2ExtInmConfProfVturIATS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.8

xdsl2ExtInmConfProfRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.9

This object is used to create a new row or to modify or
delete an existing row in this table.

xdsl2ExtInmConfProfPortList

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.14

A port list that indicates which ports this profile applys for.

VDSL2-LINE-MIBxdsl2ChConfProfProfileName

.1.3.6.1.4.1.890.1.5.12.47.60.5.1.7.1.15

xdsl2ExtChConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1 · 1 row entry · 27 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtChConfProfileTable'

The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.

xdsl2ExtChConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1

The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.

Indexes

Column Syntax OID

xdsl2ChConfProfPhyRDs

This configuration parameter defines phy retransmission
mode on downstream direction. If auto mode is selected,
PhyR will be disabled if the net data rate in PhyR mode
will be lower than in non-PhyR mode under current…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.1

xdsl2ChConfProfPhyRUs

This configuration parameter defines phy retransmission
mode on upstream direction. If auto mode is selected,
PhyR will be disabled if the net data rate in PhyR mode
will be lower than in non-PhyR mode under current l…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.2

xdsl2ChConfProfPortList

A port list that indicates which ports this profile applys for.

xdsl2ChConfProfGinpRtxModeDs

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.3

G.inp(G.998.4) support setting on downstream direction.
The possible values are:
forbidden(0) - Support for G998.4 is disabled.
preferred(1) - If G998.4 is supported by the far-end, it is enabled.
forced(2) - The …

Xdsl2ConfigRtxModer/w

Type Values:

0	forbidden
1	preferred
2	forced
3	test

Description:

forbidden(0) - Support for G998.4 is disabled.
preferred(1) - If G998.4 is supported by the far-end, it is enabled.
forced(2) - The line will only train if G998.4 can be enabled.
test(3) - G998.4 is enabled in t…

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.4

xdsl2ChConfProfGinpRtxModeUs

G.inp(G.998.4) support setting on upstream direction.
The possible values are:
forbidden(0) - Support for G998.4 is disabled.
preferred(1) - If G998.4 is supported by the far-end, it is enabled.
forced(2) - The li…

Xdsl2ConfigRtxModer/w

Type Values:

0	forbidden
1	preferred
2	forced
3	test

Description:

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.5

xdsl2ChConfProfGinpEtrMaxDs

Defines the maximum allowed value for the ETR (Effective Throughput Rate).

kbpsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.6

xdsl2ChConfProfGinpEtrMaxUs

Defines the maximum allowed value for the ETR (Effective Throughput Rate).

kbpsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.7

xdsl2ChConfProfGinpEtrMinDs

Defines the minimum value for the ETR (Effective Throughput Rate).

kbpsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.8

xdsl2ChConfProfGinpEtrMinUs

Defines the minimum value for the ETR (Effective Throughput Rate).

kbpsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.9

xdsl2ChConfProfGinpNdrMaxDs

Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration

kbpsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.10

xdsl2ChConfProfGinpNdrMaxUs

Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration

kbpsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.11

xdsl2ChConfProfGinpShineRatioDs

The loss of rate in a 1 second interval expressed as a fraction of NDR due
to a SHINE impulse noise environment expected by the operator to occur
at a probability acceptable for the services.
The valid values are all …

0.001Unsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.12

xdsl2ChConfProfGinpShineRatioUs

0.001Unsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.13

xdsl2ChConfProfGinpLeftrThresholdDs

The threshold used to declare leftr defects (see clause 11.3.3) expressed in
fraction of the NDR. The value 0 is a special value to indicate that the
receiver shall use a special value for declaring leftr defect . The…

0.01Unsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.14

xdsl2ChConfProfGinpLeftrThresholdUs

0.01Unsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.15

xdsl2ChConfProfGinpMaxDelayDs

The maximum allowed delay for retransmission.

msUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.16

xdsl2ChConfProfGinpMaxDelayUs

The maximum allowed delay for retransmission.

msUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.17

xdsl2ChConfProfGinpMinDelayDs

The minimum allowed delay for retransmission.

msUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.18

xdsl2ChConfProfGinpMinDelayUs

The minimum allowed delay for retransmission.

msUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.19

xdsl2ChConfProfGinpInpMinDs

Minimum impulse noise protection (INP) against SHINE in DMT symbols.
The possible values are: 0-31

symbolsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.20

xdsl2ChConfProfGinpInpMinUs

Minimum impulse noise protection (INP) against SHINE in DMT symbols.
The possible values are: 0-31

symbolsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.21

xdsl2ChConfProfGinpReinCfgInpDs

Minimum impulse protection against electrical repetitive impulse noise
(REIN) in DMT symbols.
The possible values are: 0-7

symbolsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.22

xdsl2ChConfProfGinpReinCfgInpUs

Minimum impulse protection against electrical repetitive impulse noise
(REIN) in DMT symbols.
The possible values are: 0-7

symbolsUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.23

xdsl2ChConfProfGinpReinCfgFreqDs

Configuration indicating the frequency of REIN.
The possible values are:
100 - 100Hz
120 - 120Hz

HzUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.24

xdsl2ChConfProfGinpReinCfgFreqUs

Configuration indicating the frequency of REIN.
The possible values are:
100 - 100Hz
120 - 120Hz

HzUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.25

xdsl2ChConfProfSosMinRateB0Ds

This parameter specifies the minimum net data rate required for a valid SOS request
in the downstream direction. The value shall be coded as an unsigned integer representing
the data rate as a multiple of 8 kbit/s.

xdsl2ChConfProfSosMinRateB0Us

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.26

VDSL2-LINE-MIBxdsl2LAlarmConfTempTemplateName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.60.5.2.1.1.27

xdsl2ExtLineAlarmConfTemplateTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.5.3.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineAlarmConfTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtLineAlarmConfTemplateTable'

The table xdsl2ExtLineAlarConfTemplateTable extends 
xdsl2ExtLineAlarConfTemplateTable.

xdsl2ExtLineAlarmConfTemplateEntry row .1.3.6.1.4.1.890.1.5.12.47.60.5.3.1.1

The table xdsl2ExtLineAlarConfTemplateTable extends
xdsl2ExtLineAlarConfTemplateTable.

Indexes

Column	Syntax	OID
xdsl2LAlarmConfTempPortList A port list that indicates which ports this template applys for.	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.12.47.60.5.3.1.1.3`

xdsl2ExtLineAlarmConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.5.3.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineAlarmConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtLineAlarmConfProfileTable'

The table xdsl2ExtLineAlarmConfProfileTable extends 
xdsl2LineAlarmConfProfileTable.

xdsl2ExtLineAlarmConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.60.5.3.2.1

The table xdsl2ExtLineAlarmConfProfileTable extends
xdsl2LineAlarmConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2LineAlarmConfProfileName

Column	Syntax	OID
xdsl2LineAlarmConfProfileXtucThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: `range: 0..900`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.3.2.1.1`
xdsl2LineAlarmConfProfileXturThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: `range: 0..900`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.3.2.1.2`
xdsl2LAlarmConfProfilePortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.12.47.60.5.3.2.1.3`
xdsl2LineAlarmConfProfileXturThresh15MinLprs A threshold for the xdsl2PMLCurr15MLprs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: `range: 0..900`	`.1.3.6.1.4.1.890.1.5.12.47.60.5.3.2.1.4`

xdsl2ExtChAlarmConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.60.5.3.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChAlarmConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdsl2ExtChAlarmConfProfileTable'

The table xdsl2ExtChAlarmConfProfileTable extends 
xdsl2ExtChAlarmConfProfileTable.

xdsl2ExtChAlarmConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.60.5.3.3.1

The table xdsl2ExtChAlarmConfProfileTable extends
xdsl2ExtChAlarmConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2ChAlarmConfProfileName

Column	Syntax	OID
xdsl2ChAlarmConfProfilePortList A port list that indicates which ports this profileapplys for.	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.12.47.60.5.3.3.1.3`

macBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.61.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::macBasedVlanTable'

macBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.61.1.1

An entry in macBasedVlanTable.

Indexes

macBasedVlanMAC

Column Syntax OID

macBasedVlanName

Name of Mac-Based Vlan.

.1.3.6.1.4.1.890.1.5.12.47.61.1.1.1

macBasedVlanMAC

Mac address for Mac-Based Vlan

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.61.1.1.2

macBasedVlanVlanId

Vlan id for Mac-Based Vlan, 1~4094.

macBasedVlan8021pPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.61.1.1.3

802.1p priority for Mac-Based Vlan, 0~7.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.61.1.1.4

macBasedVlanRowstatus

Row Status for Mac-Based Vlan

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.61.1.1.5

vlanProfileTable

table

.1.3.6.1.4.1.890.1.5.12.47.62.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanProfileTable'

vlanProfileEntry row .1.3.6.1.4.1.890.1.5.12.47.62.1.1

An entry in vlanProfileTable.

Indexes

vlanProfileName

Column Syntax OID

vlanProfileName

Name of vlan Profile.

vlanProfileUnknownMulticast

.1.3.6.1.4.1.890.1.5.12.47.62.1.1.1

vlanProfileMacLearning

Mac learning for vlan profile

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.890.1.5.12.47.62.1.1.2

Set unknown multicast packets behavior.
None means normally forwarding.
Flooding means force forwarding even unknown multicast setting on multicast is drop.

Enumerationr/w

Enumerated Values:

1	none
3	flooding

.1.3.6.1.4.1.890.1.5.12.47.62.1.1.3

vlanProfileRowStatus

Row status for vlan profile

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.62.1.1.4

vlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.62.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanTable'

vlanEntry row .1.3.6.1.4.1.890.1.5.12.47.62.2.1

An entry in vlanTable.

Indexes

Column	Syntax	OID
profileName Name of vlan Profile.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.62.2.1.1`

l2ptTable

table

.1.3.6.1.4.1.890.1.5.12.47.115.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk l2ptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::l2ptTable'

l2ptEntry row .1.3.6.1.4.1.890.1.5.12.47.115.3.1

An entry in l2ptTable.

Indexes

l2ptPointToPointProtocolGroup

Column Syntax OID

l2ptProtocolGroup

L2PT protocols enabled/disabled on the port

Bitsr/w

Enumerated Values:

0	cDP
1	sTP
2	vTP

.1.3.6.1.4.1.890.1.5.12.47.115.3.1.1

L2PT point-to-point protocols enabled/disabled on the port

Bitsr/w

Enumerated Values:

0	pAGP
1	lACP
2	uDLD

.1.3.6.1.4.1.890.1.5.12.47.115.3.1.2

l2ptMode

L2PT port role on the port

Enumerationr/w

Enumerated Values:

1	access
2	tunnel

.1.3.6.1.4.1.890.1.5.12.47.115.3.1.3

vlanMappingPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.116.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanMappingPortTable'

vlanMappingPortEntry row .1.3.6.1.4.1.890.1.5.12.47.116.2.1

An entry in vlanMappingPortTable.

Indexes

Column Syntax OID

vlanMappingPortState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.116.2.1.1

vlanMappingPortDropMiss

vlanMappingRulePort vlanMappingRuleVid

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.116.2.1.2

vlanMappingRuleTable

table

.1.3.6.1.4.1.890.1.5.12.47.116.3 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vlanMappingRuleTable'

vlanMappingRuleEntry row .1.3.6.1.4.1.890.1.5.12.47.116.3.1

An entry in vlan-mapping rule table

Indexes

Column Syntax OID

vlanMappingRuleName

The name of vlan-mapping entry

.1.3.6.1.4.1.890.1.5.12.47.116.3.1.1

vlanMappingRulePort

interface port id

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.116.3.1.2

vlanMappingRuleVid

inner vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.116.3.1.3

vlanMappingRuleTransVid

translated vid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.116.3.1.4

vlanMappingRulePriority

priority

Enumerationr/w

Enumerated Values:

0	priority_0
1	priority_1
2	priority_2
3	priority_3
4	priority_4
5	priority_5
6	priority_6
7	priority_7

.1.3.6.1.4.1.890.1.5.12.47.116.3.1.5

vlanMappingRuleRowStatus

vlanMappingRuleReplacePrio

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.116.3.1.6

Replace Original Priority

transceiverSerialInfoEntryPort

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.116.3.1.7

transceiverSerialInfoTable

table

.1.3.6.1.4.1.890.1.5.12.47.117.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverSerialInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::transceiverSerialInfoTable'

transceiverSerialInfoEntry row .1.3.6.1.4.1.890.1.5.12.47.117.1.1

An entry in transceiverSerialInfoTable.

Indexes

Column Syntax OID

transceiverSerialInfoEntryPort

Index of transceiverSerialInfo. It is referred to dot1dBasePort

transceiverSerialInfoEntryStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.1

Transceiver module status.

Enumeration

Enumerated Values:

1	ok_with_DDM
2	ok_without_DDM
3	nonoperational

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.2

transceiverSerialInfoEntryVendor

Transceiver module vendor name.

transceiverSerialInfoEntryPartNo

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.3

Part number provided by transceiver module vendor.

transceiverSerialInfoEntrySerialNo

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.4

Serial number provided by transceiver module vendor.

transceiverSerialInfoEntryRevision

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.5

Revision level for part number provided by transceiver module vendor.

transceiverSerialInfoEntryDateCode

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.6

Transceiver module vendor's manufacturing date code

transceiverSerialInfoEntryTransceiver

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.7

Transceiver module type names

transceiverDdmInfoEntryPort transceiverDdmInfoEntryType

.1.3.6.1.4.1.890.1.5.12.47.117.1.1.8

transceiverDdmInfoTable

table

.1.3.6.1.4.1.890.1.5.12.47.117.2 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverDdmInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::transceiverDdmInfoTable'

transceiverDdmInfoEntry row .1.3.6.1.4.1.890.1.5.12.47.117.2.1

An entry in transceiverDdmInfoTable.

Indexes

Column Syntax OID

transceiverDdmInfoEntryPort

Index of transceiverDdmInfo. This will be referred to dot1dBasePort

transceiverDdmInfoEntryType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.1

Transceiver module status.

Enumeration

Enumerated Values:

1	temperature
2	voltage
3	txbias
4	txPower
5	rxPower

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.2

transceiverDdmInfoEntryAlarmMax

Default Transceiver high alarm threshold.

transceiverDdmInfoEntryAlarmMin

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.3

Default Transceiver low alarm threshold.

transceiverDdmInfoEntryWarnMax

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.4

Default Transceiver high warning threshold.

transceiverDdmInfoEntryWarnMin

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.5

Default Transceiver low warning threshold.

transceiverDdmInfoEntryCurrent

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.6

Transceiver current value.

transceiverDdmInfoEntryDescription

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.7

Transceiver module type names

.1.3.6.1.4.1.890.1.5.12.47.117.2.1.8

layer2StatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.1.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk layer2StatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::layer2StatusTable'

layer2StatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.1.1.1

An entry in layer2Table.

Indexes

vturUnknownMulticastStatus

Column Syntax OID

vturIgmpSnoopingStatus

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.118.1.1.1.2

Enumeration

Enumerated Values:

1	block
2	forward

.1.3.6.1.4.1.890.1.5.12.47.118.1.1.1.4

portStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.2.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::portStatusTable'

portStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.2.1.1

An entry in portTable.

Indexes

BRIDGE-MIBdot1dBasePort portStatusNumber

Column Syntax OID

portStatusNumber

Display all ports we got in CPE side

BRIDGE-MIBdot1dBasePort vturWanStatusIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.2.1.1.1

portStatusOperStatus

CPE port's current status.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.118.2.1.1.3

portStatusOperSpeed

CPE port's current speed.

Enumeration

Enumerated Values:

0	linkdown
1	autoneg
2	half_10M
3	full_10M
4	half_100M
5	full_100M

.1.3.6.1.4.1.890.1.5.12.47.118.2.1.1.8

vturWanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1 · 1 row entry · 12 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturWanStatusTable'

vturWanStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1

An entry in vturWanTable.

Indexes

Column Syntax OID

vturWanStatusIndex

Display the wan index range from 1 to 4 we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.1

vturWanStatusVlanTagging

Display the vlan tagging we got in CPE side

Enumeration

Enumerated Values:

1	disable
2	vlan_mux
3	auto_vlan

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.2

vturWanStatusVlanID

Display the vlan id range from 1 to 4094 we got in CPE side

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.3

vturWanStatus8021p

Display the 802.1p value range from 0 to 7 we got in CPE side

vturWanStatusProtocolSetting

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.4

vturWanStatusPPPUsername

Display the PPP username we got in CPE side

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.5

vturWanStatusPPPPassword

Display the PPP password we got in CPE side

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.6

vturWanStatusProtocol

Display the wan protocol info we got in CPE side

Enumeration

Enumerated Values:

1	pppoe
2	mer
3	bridge

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.7

Display the wan service enable/disable status we got in CPE side

Bits

Enumerated Values:

0	dhcp_client_
1	nat
2	firewall
3	igmp

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.8

vturWanStatusIP

Display the wan IP setting we got in CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.9

vturWanStatusSubnetMask

Display the wan subnet mask we got in CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.10

vturWanStatusService

Display the wan service enable/disable status we got in CPE side

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.11

vturWanStatusMAC

Display the wan MAC we got in CPE side

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.118.4.1.1.1.12

vturWanStatusCommonTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.4.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturWanStatusCommonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturWanStatusCommonTable'

vturWanStatusCommonEntry row .1.3.6.1.4.1.890.1.5.12.47.118.4.2.1.1

An entry in vturWanCommonTable.

Indexes

Column Syntax OID

vturWanStatusCommonQoS

vturWanStatusCommonEnableAutoDefaultGateway

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.118.4.2.1.1.1

Display the enable auto default gateay setting we get from CPE side

vturWanStatusCommonDefaultGatewayIP

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.118.4.2.1.1.2

Display the default gateway setting we get from CPE side

vturWanStatusCommonVitualPortEnable

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.4.2.1.1.3

Display Enable/Disable virtual port on eth1 setting we get on CPE side

BRIDGE-MIBdot1dBasePort vturClassificationStatusIndex

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.118.4.2.1.1.4

vturClassificationStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.5.1 · 1 row entry · 23 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturClassificationStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturClassificationStatusTable'

vturClassificationStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.5.1.1

An entry in vturClassificationTable.

Indexes

Column Syntax OID

vturClassificationStatusIndex

Display the classification index range from 1 to 8 we got in CPE side

vturClassificationStatusRuleEnable

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.1

Display the classification enable/disable status we got in CPE side

vturClassificationStatusWanInterface

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.2

Display the wan interface index range from 1 to 4 we got in CPE side

vturClassificationStatusQueue

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.3

Display the assigned queue (1-4)802.1p value we got in CPE side

vturClassificationStatus8021p

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.4

Mark 802.1p if 802.1q is enabled [0-7]

vturClassificationStatusVid

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.5

Display the 802.1Q VLAN ID: [1-4094]

vturClassificationStatusFilterPhysicalPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.6

Physical LAN Port number

vturClassificationStatusFilterProtocol

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.7

Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4

Enumeration

Enumerated Values:

1	tcp_udp
2	tcp
3	udp
4	icmp

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.8

vturClassificationStatusFilterSourceIP

Display the filtering source IP we got in CPE side

vturClassificationStatusFilterSourceSubnetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.9

Display the filtering source subnet mask we got in CPE side

vturClassificationStatusFilterDestinationIP

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.10

Display the filtering destination IP we got in CPE side

vturClassificationStatusFilterDestinationSubnetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.11

Display the filtering destination subnet mask we got in CPE side

vturClassificationStatusFilterSourcePortStart

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.12

Display the filtering source port start we got in CPE side

vturClassificationStatusFilterSourcePortEnd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.13

Display the filtering source port end we got in CPE side

vturClassificationStatusFilterDestinationPortStart

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.14

Display the filtering destination port start we got in CPE side

vturClassificationStatusFilterDestinationPortEnd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.15

Display the filtering destination end port we got in CPE side

vturClassificationStatusFilterSourceMACAddr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.16

Display the filtering source MAC addr we got in CPE side

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.17

vturClassificationStatusFilterSourceMACMask

Display the filtering source MAC mask we got in CPE side

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.18

vturClassificationStatusFilterDestinationMACAddr

Display the filtering destination MAC addr we got in CPE side

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.19

vturClassificationStatusFilterDestinationMACMask

Display the filtering destination MAC mask we got in CPE side

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.20

vturClassificationStatusFilter8021p

Display the filtering 802.1p value we got in CPE side

vturClassificationStatusFilterProtocolType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.21

Display the filtering protocol type we got in CPE side

vturClassificationStatusPolicyGatewayIP

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.22

Display the filtering protocol type we got in CPE side

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.5.1.1.23

vturAPGeneralStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPGeneralStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPGeneralStatusTable'

vturAPGeneralStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1

An entry in VTUR AP General Statistics Table.

Indexes

BRIDGE-MIBdot1dBasePort vturWlanPerSSIDStatusIndex

Column	Syntax	OID
vturLanRxBytes Received bytes on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.1`
vturLanRxPkts Received frames on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.2`
vturLanTxBytes Transmitted bytes on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.3`
vturLanTxPkts Transmitted frames on LAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.4`
vturVdslRxBytes Received bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.5`
vturVdslRxPkts Received frames on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.6`
vturVdslTxBytes Transmitted bytes on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.7`
vturVdslTxPkts Transmitted frames on VDSL	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.8`
vturWlanRxBytes Received bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.9`
vturWlanRxPkts Received frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.10`
vturWlanRxErrs Received error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.11`
vturWlanRxDrops Received drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.12`
vturWlanTxBytes Transmitted bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.13`
vturWlanTxPkts Transmitted frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.14`
vturWlanTxErrs Transmitted error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.15`
vturWlanTxDrops Transmitted drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.1.1.16`

vturAPPerSSIDStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPPerSSIDStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPPerSSIDStatusTable'

vturAPPerSSIDStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1

An entry in VTUR AP Per-SSID Statistics Table.

Indexes

Column	Syntax	OID
vturWlanPerSSIDStatusIndex Index of vturAPPerSSIDStatusTable	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.1`
vturWlanPerSSIDStatusSSID WLAN SSID	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.2`
vturWlanPerSSIDRxBytes Received bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.3`
vturWlanPerSSIDRxPkts Received frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.4`
vturWlanPerSSIDRxErrs Received error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.5`
vturWlanPerSSIDRxDrops Received drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.6`
vturWlanPerSSIDTxBytes Transmitted bytes on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.7`
vturWlanPerSSIDTxPkts Transmitted frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.8`
vturWlanPerSSIDTxErrs Transmitted error frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.9`
vturWlanPerSSIDTxDrops Transmitted drop frames on WLAN	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.2.1.10`

vturAPPortLinkUpTimeTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.1.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPPortLinkUpTimeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPPortLinkUpTimeTable'

vturAPPortLinkUpTimeEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.1.3.1

An entry in VTUR AP General Statistics Table.

Indexes

BRIDGE-MIBdot1dBasePort vturPortIndex

Column	Syntax	OID
vturPortIndex Port index of vtur	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.3.1.1`
vturLinkUpTime Port link up time	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.1.3.1.2`

vturAPWlanStatusBasicTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusBasicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatusBasicTable'

vturAPWlanStatusBasicEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1

An entry in VTUR AP Wlan Basic Table.

Indexes

Column	Syntax	OID
vturWlanEnable Display the current WLAN status 0:Disable WLAN 1:Enable WLAN	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.1`
vturWlanSsid SSID of the AP	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.2`
vturWlanBssid Mac address of AP	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.3`
vturWlanHidden Display the current AP's SSID status 0: not hide AP's SSID 1: hide AP's SSID	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.4`
vturWlanChannel Channel number of the AP	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.5`
vturWlanMode Display the current AP's mode 1: B or G mix mode 2: Pure G mode 3: Pure B mode	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.6`
vturWlanTxPower Display the current Transmit power 1: 30 mW 2: 15 mW	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.7`
vturWlanMulticastRate Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps 0: auto 2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode 12, 18, 24, 36, 48, 96, 108: Transmit rate = 6…	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.1.1.8`

vturAPWlanStatusSecurityTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2 · 1 row entry · 12 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatusSecurityTable'

vturAPWlanStatusSecurityEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
vturWlanSecurityMode Display the current Security Mode 1: No security 2: Static WEP 3: WPA-PSK 4: WPA 5: WPA2 6: WPA2-PSK	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.1`
vturWlanWepEncryp This field is for SecurityMode = static WEP. 1: 64-Bit 2: 128-Bit	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.2`
vturWlanKeyId This field is for SecurityMode = static WEP. It indicate which key will be used for encryption. If KeyId is equal to 1, AP will use Key1 to encrypt frame.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.3`
vturWlanKey1 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key1 will be 10 heximal digits. If WEPEncryp is 128-Bit, key1 will be 26 heximal digits.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.4`
vturWlanKey2 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key2 will be 10 heximal digits. If WEPEncryp is 128-Bit, key2 will be 26 heximal digits.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.5`
vturWlanKey3 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key3 will be 10 heximal digits. If WEPEncryp is 128-Bit, key3 will be 26 heximal digits.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.6`
vturWlanKey4 This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key4 will be 10 heximal digits. If WEPEncryp is 128-Bit, key4 will be 26 heximal digits.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.7`
vturWlanPsk This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.8`
vturWlanWpaMix This field is for SecurityMode = WPA2 or WPA2-PSK. When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP. When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP co…	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.9`
vturWlanReAuthTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger re-authentication with station every [ReAuthTime] seconds.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.10`
vturWlanIdleTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will flush station??s information if there are no packets from station for [idleTime] seconds.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.11`
vturWlanGtkTime This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger the update of group key with station every [GTKTime] seconds.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.2.1.12`

vturAPWlanStatusRadiusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusRadiusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatusRadiusTable'

vturAPWlanStatusRadiusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
vturWlanAuthServIP This field is the IP address of authentication server.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1.1`
vturWlanAuthServPort This field is the port number of authentication server.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1.2`
vturWlanAuthServSecret This field is the shared secret of authentication server.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1.3`
vturWlanAccServActive This field is for activating or inactivating accounting server. 0: inactivate accounting server. 1: activate accounting server	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1.4`
vturWlanAccServIP This field is the IP address of accounting server.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1.5`
vturWlanAccServPort This field is the port number of accounting server.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1.6`
vturWlanAccServSecret This field is the shared secret of accounting server.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.3.1.7`

vturAPWlanStatusMacFilterTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusMacFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatusMacFilterTable'

vturAPWlanStatusMacFilterEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.1.1

An entry in VTUR AP Wlan Mac Filter Table.

Indexes

BRIDGE-MIBdot1dBasePort fltStaIndex

Column	Syntax	OID
vturWlanMacFltActive Activate or inactivate wlan MAC filter. 0: Inactive 1: Active	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.1.1.1`
vturWlanMacFltAction 0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8. 1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.1.1.2`

vturAPWlanStatusMacFltAddrTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusMacFltAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatusMacFltAddrTable'

vturAPWlanStatusMacFltAddrEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.2.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
vturWlanFltStaIndex The index for Mac filter	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.2.1.1`
vturWlanMacFltAddr The address for Mac filter	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.4.2.1.2`

vturAPWlanStatusStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatusStatisticsTable'

vturAPWlanStatusStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1

An entry in VTUR AP Wlan Security Table.

Indexes

BRIDGE-MIBdot1dBasePort staIndex

Column	Syntax	OID
vturWlanInPkts Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.1`
vturWlanInOctets Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.2`
vturWlanInUCasts Received unicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.3`
vturWlanInMCasts Received multicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.4`
vturWlanRxFCSErrors Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.5`
vturWlanOutPkts Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.6`
vturWlanOutOctets Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.7`
vturWlanOutUCasts Transmitted unicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.8`
vturWlanOutMCasts Transmitted multicast frames	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.5.1.9`

vturAPWlanStatusStaListTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.7.2.6 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturAPWlanStatusStaListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturAPWlanStatusStaListTable'

vturAPWlanStatusStaListEntry row .1.3.6.1.4.1.890.1.5.12.47.118.7.2.6.1

An entry in VTUR AP Wlan Security Table.

Indexes

Column	Syntax	OID
vturWlanStaIndex The index of associated WLAN STA. Max = 32, Min = 1	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.6.1.1`
vturWlanStaMacAddr The address of associated WLAN STA	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.118.7.2.6.1.2`

vturConsoleStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.8.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturConsoleStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturConsoleStatusTable'

vturConsoleStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.8.1.1

An entry in vturConsoleTable.

Indexes

vturConsoleStatusAdminPassword

Column Syntax OID

vturConsoleStatusState

Display the current Console status
1: Enable console
2: Disable console

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.118.8.1.1.1

The operation for vtur device admin password

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.8.1.1.2

vturConsoleStatusUserPassword

The operation for vtur device user password

OctetString

.1.3.6.1.4.1.890.1.5.12.47.118.8.1.1.3

remoteFunctionStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.9.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk remoteFunctionStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::remoteFunctionStatusTable'

remoteFunctionStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.9.1.1

An entry in RemoteFunctionTable.

Indexes

BRIDGE-MIBdot1dBasePort vturMacAddrIndex

Column Syntax OID

telnetStatus

Display the current Telnet status
1: Enable All
2: Disable All
3: Enable LAN only
4: Enable WAN only

Enumeration

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.118.9.1.1.3

tftpStatus

Display the current TFTP status
1: Enable All
2: Disable All
3: Enable LAN only
4: Enable WAN only

Enumeration

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.118.9.1.1.4

webStatus

Display the current Web status
1: Enable All
2: Disable All
3: Enable LAN only
4: Enable WAN only

Enumeration

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.118.9.1.1.5

snmpStatus

Display the current SNMP status
1: Enable All
2: Disable All
3: Enable LAN only
4: Enable WAN only

Enumeration

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.118.9.1.1.6

sshStatus

Display the current SSH status
1: Enable All
2: Disable All
3: Enable LAN only
4: Enable WAN only

Enumeration

Enumerated Values:

1	enable_all
2	disable_all
3	enable_lan_only
4	enable_wan_only

.1.3.6.1.4.1.890.1.5.12.47.118.9.1.1.7

wirelessStatus

Display the current Wireless status
1: Disable
2: Enable

Enumeration

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.890.1.5.12.47.118.9.1.1.8

vturMacAddrTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.10.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturMacAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturMacAddrTable'

vturMacAddrEntry row .1.3.6.1.4.1.890.1.5.12.47.118.10.1.1

An entry in vturMacAddrTable.

Indexes

Column	Syntax	OID
vturMacAddrIndex The index of associated vtur STA. Max = 32, Min = 1	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.10.1.1.1`
vturMacAddress The address of associated vtur STA	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.890.1.5.12.47.118.10.1.1.2`
vturInterface The interface of the mac address	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.118.10.1.1.3`

vturLanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.11.1 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturLanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturLanStatusTable'

vturLanStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.11.1.1

An entry in vturLanTable.

Indexes

Column Syntax OID

vturLanStatusIP

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.1

vturLanStatusSubnetmask

vturLanStatusDHCPServerStartIPAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.2

vturLanStatusDHCPOption

Enumeration

Enumerated Values:

1	disable_dhcp_server
2	enable_dhcp_server
3	dhcp_server_relay

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.3

vturLanStatusDHCPServerEndIPAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.4

vturLanStatusDHCPServerSubnetmask

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.5

vturLanStatusDHCPServerIPAddr

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.6

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.7

vturLanStatusEthPort

Display the current vtur LAN port to be isolated. From LAN1 to LAN4.

vturLanStatusEthPortIsolate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.8

Display the current vtur LAN port isolated-enable or isolated-disable.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.47.118.11.1.1.9

vturCFMStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.118.12.1 · 1 row entry · 11 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturCFMStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::vturCFMStatusTable'

vturCFMStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.118.12.1.1

An entry in vturCFMTable.

Indexes

Column	Syntax	OID
vturCFMStatusMdName	OctetString	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.2`
vturCFMStatusMaName	OctetString	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.3`
vturCFMStatusVid	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.4`
vturCFMStatusMepId	IEEE8021-CFM-MIBDot1agCfmMepId Type Constraints: `range: 1..8191`	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.5`
vturCFMStatusMdLevel	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.6`
vturCFMStatusDestMAC	OctetString	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.8`
vturCFMStatusLBMCount	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.9`
vturCFMStatusResultSentLBM	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.10`
vturCFMStatusResultInorderLBM	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.11`
vturCFMStatusResultOutorderLBM	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.12`
vturCFMStatusMACAddr CPE MAC address	OctetString	`.1.3.6.1.4.1.890.1.5.12.47.118.12.1.1.13`

pppoeIATable

table

.1.3.6.1.4.1.890.1.5.12.47.119.2.2 · 1 row entry · 11 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeIATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::pppoeIATable'

pppoeIAEntry row .1.3.6.1.4.1.890.1.5.12.47.119.2.2.1

An entry in pppoeIATable.

Indexes

pppoeIAVID

Column Syntax OID

pppoeIAVID

pppoeIACircuitIDInfoEnable

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.1

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.2

pppoeIACircuitIDInfoData

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.3

pppoeIARemoteIDEnable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.4

pppoeIARemoteIDData

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.5

pppoeIARowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.6

pppoeIARemoteIDType

<1:port | 2:system>

Enumerationr/w

Enumerated Values:

1	port
2	system
3	all

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.7

pppoeIACircuitIDType

<1:hostname | 2:system>

Enumerationr/w

Enumerated Values:

1	hostname
2	system

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.8

pppoeIAOption

Tag option setting for global PPPoE IA. private(0), SP(1), SV(2), PV(3), SPV(4).

Enumerationr/w

Enumerated Values:

0	private
1	sp
2	sv
3	pv
4	spv

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.9

pppoeIADelim

Delimiter setting for global PPPoE IA. none(0), pound[#](1), semicolon[;](2), dot[.](3), comma[,](4), slash[/](5), space[ ](6).

Enumerationr/w

Enumerated Values:

0	none
1	pound
2	semicolon
3	dot
4	comma
5	slash
6	space

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.10

pppoeIARemoteIDDelim

pvcRulePort pvcRuleVpi pvcRuleVci

.1.3.6.1.4.1.890.1.5.12.47.119.2.2.1.11

pvcRuleTable

table

.1.3.6.1.4.1.890.1.5.12.47.120.1 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pvcRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::pvcRuleTable'

pvcRuleEntry row .1.3.6.1.4.1.890.1.5.12.47.120.1.1

An entry in PVC rule table

Indexes

Column Syntax OID

pvcRulePort

interface port id

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.1

pvcRuleVpi

VPI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.2

pvcRuleVci

VCI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.3

pvcRulePvid

PVID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.4

pvcRuleEncap

ATM encapulation method

Enumerationr/w

Enumerated Values:

0	llc
1	vc

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.5

pvcRulePriority

priority

Enumerationr/w

Enumerated Values:

0	priority_0
1	priority_1
2	priority_2
3	priority_3
4	priority_4
5	priority_5
6	priority_6
7	priority_7

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.6

pvcRuleFCS

Frame Check Sequence of PDU is preserved or not.

Enumerationr/w

Enumerated Values:

0	fcs
1	no_fcs

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.7

pvcRuleMVlan

Multicast VLAN pass through.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.8

pvcRuleRowStatus

ippvcRulePort ippvcRuleVpi ippvcRuleVci

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.120.1.1.9

ippvcRuleTable

table

.1.3.6.1.4.1.890.1.5.12.47.120.2 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ippvcRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::ippvcRuleTable'

ippvcRuleEntry row .1.3.6.1.4.1.890.1.5.12.47.120.2.1

An entry in IPPVC rule table

Indexes

Column Syntax OID

ippvcRulePort

interface port id

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.1

ippvcRuleVpi

VPI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.2

ippvcRuleVci

VCI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.3

ippvcRulePvid

PVID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.4

ippvcRuleEncap

ATM encapulation method

Enumerationr/w

Enumerated Values:

0	llc
1	vc

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.5

ippvcRulePriority

priority

Enumerationr/w

Enumerated Values:

0	priority_0
1	priority_1
2	priority_2
3	priority_3
4	priority_4
5	priority_5
6	priority_6
7	priority_7

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.6

ippvcRuleSubnetIp

IP address of the subscriber intranet

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.7

ippvcRuleSubnetMask

netmask of the subscriber intranet

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.8

ippvcRuleDefaultRoute

default route for outgoing traffic

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.9

ippvcRuleRowStatus

paepvcRulePort paepvcRuleVpi paepvcRuleVci

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.120.2.1.10

paepvcRuleTable

table

.1.3.6.1.4.1.890.1.5.12.47.120.3 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk paepvcRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::paepvcRuleTable'

paepvcRuleEntry row .1.3.6.1.4.1.890.1.5.12.47.120.3.1

An entry in PAEPVC rule table

Indexes

Column Syntax OID

paepvcRulePort

interface port id

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.3.1.1

paepvcRuleVpi

VPI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.3.1.2

paepvcRuleVci

VCI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.3.1.3

paepvcRulePvid

PVID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.120.3.1.4

paepvcRuleEncap

ATM encapulation method

Enumerationr/w

Enumerated Values:

0	llc
1	vc

.1.3.6.1.4.1.890.1.5.12.47.120.3.1.5

paepvcRulePriority

priority

Enumerationr/w

Enumerated Values:

0	priority_0
1	priority_1
2	priority_2
3	priority_3
4	priority_4
5	priority_5
6	priority_6
7	priority_7

.1.3.6.1.4.1.890.1.5.12.47.120.3.1.6

paepvcRuleRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.120.3.1.7

xdslBondingConfigTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.1.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdslBondingConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdslBondingConfigTable'

xdslBondingConfigEntry row .1.3.6.1.4.1.890.1.5.12.47.121.1.1.1

An entry in xdslBondingConfigTable.

Indexes

xdslBondingConfigGroupId

Column Syntax OID

xdslBondingConfigGroupId

Group ID of Bonding Group.
The value is defined the range of B1~B12.
B1(1),
B2(2),
B3(3),
B4(4),
B5(5),
B6(6),
B7(7),
B8(8),
B9(9),
B10(10…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.121.1.1.1.1

xdslBondingConfigName

Name of xDSL Bonding Group.

xdslBondingConfigMemberPort

.1.3.6.1.4.1.890.1.5.12.47.121.1.1.1.2

Member Ports of Bonding Group

xdslBondingConfigTemplateMode

.1.3.6.1.4.1.890.1.5.12.47.121.1.1.1.3

Template mode of Bonding Group.
Mode 1:Total data rate
Mode 2:Data rate for per-line

Enumerationr/w

Enumerated Values:

1	mode1
2	mode2

.1.3.6.1.4.1.890.1.5.12.47.121.1.1.1.4

xdslBondingConfigTemplateFirstPort

The value of this object identifies the row in the
xDSL line configuration Profile Table,
(xdslBondingConfigTemplateFirstPort) that applies for this first line.

xdslBondingConfigTemplateSecondPort

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.47.121.1.1.1.5

The value of this object identifies the row in the
xDSL line configuration Profile Table,
(xdslBondingConfigTemplateSecondPort) that applies for this second line.

xdslBondingConfigRowStatus

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.47.121.1.1.1.6

Row status for bonding profile

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.121.1.1.1.7

xdslBondingStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdslBondingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::xdslBondingStatusTable'

xdslBondingStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.1.1

An entry in xdslBondingStatusTable.

Indexes

xdslBondingStatusGroupId

Column	Syntax	OID
xdslBondingStatusGroupId The value of Bonding Group ID. The ID is set range from 1~12. B1(1), B2(2), B3(3), B4(4), B5(5), B6(6), B7(7), B8(8), B9(9), …	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.1`
xdslBondingStatusActive Current active group for Bonding. Active(1), Inactive(2)	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.2`
xdslBondingStatusActivePort Actually, the group ports are activated for Bonding group.	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.3`
xdslBondingStatusMainPort Main Port(traffic line) of Bonding Group. 4294967295(0xffffffff) for Null Value	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.4`
xdslBondingStatusFlagType The value is the transfer mode for bonding group, the following represent -> 0:ATM; 1:PTM.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.5`
xdslBondingStatusRateDs Down-stream Group Rate for Bonding group. 4294967295(0xffffffff) for Null Value	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.6`
xdslBondingStatusRateUs Up-stream Group Rate for Bonding group. 4294967295(0xffffffff) for Null Value	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.7`
xdslBondingStatusUpTime Bonding Group Up Time.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.121.2.1.1.8`

ptmBondingCountersStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ptmBondingCountersStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::ptmBondingCountersStatusTable'

ptmBondingCountersStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.2.1

An entry in PtmBondingCountersStatusTable.

Indexes

xdslBondingStatusGroupId

Column	Syntax	OID
xdslBondingrxSmallFragments nbr of fragments discarded due to too small.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.2.1.1`
xdslBondingrxLargeFragments nbr of fragments discarded due to too long.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.2.1.2`
xdslBondingrxBadFragments fragments not in sequence	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.2.1.3`
xdslBondingrxLostFragments nbr of gaps in fragments sequence.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.2.1.4`
xdslBondingrxLostStarts missing SOPS	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.2.1.5`
xdslBondingrxLostEnds missing EOPs	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.2.1.6`

bondingGroupLookupTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.3 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk bondingGroupLookupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::bondingGroupLookupTable'

bondingGroupLookupEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.3.1

An entry in xdslBondingGroupLookupTable.

Indexes

bondingprotoBasedVlanBondingGroup bondingprotoBasedVlanPacketType bondingprotoBasedVlanEtherType

Column	Syntax	OID
bondingGroupIDLookup The value of Bonding Group ID. The ID is set range from 1~12. B1(1), B2(2), B3(3), B4(4), B5(5), B6(6), B7(7), B8(8), B9(9), …	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.1`
bondingGroupNameLookup Name of xDSL Bonding Group.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.2`
bondingGroupActiveLookup Current active group for Bonding. Active(1), Inactive(2)	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.3`
bondingGroupMainPortLookup Main Port(traffic line) of Bonding Group. Others Port(0) Main Port(1), Slave Port(2)	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.4`
bondingGroupProfileLookup The value of this object identifies the row in the xDSL line configuration Profile Table.	RFC1213-MIBDisplayString Constraints: `range: 1-32`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.5`
bondingGroupMaxDSrateLookup Max Downstream Rate for the lines. 4294967295(0xffffffff) for Null Value	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.6`
bondingGroupMaxUSrateLookup Max Upstream Rate for the lines. 4294967295(0xffffffff) for Null Value	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.7`
bondingGroupMinDSrateLookup Min Downstream Rate for the lines. 4294967295(0xffffffff) for Null Value	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.8`
bondingGroupMinUSrateLookup Min Upstream Rate for the lines. 4294967295(0xffffffff) for Null Value	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.3.1.9`

bondingprotoBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.4 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk bondingprotoBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::bondingprotoBasedVlanTable'

bondingprotoBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.4.1

An entry in BondingprotoBasedVlanTable.

Indexes

Column Syntax OID

bondingprotoBasedVlanBondingGroup

bondingprotoBasedVlanPacketType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.121.2.4.1.1

Enumeration

Enumerated Values:

1	etherII
2	snap
3	llc

.1.3.6.1.4.1.890.1.5.12.47.121.2.4.1.2

bondingprotoBasedVlanEtherType

bondingprotoBasedVlanName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.121.2.4.1.3

bondingprotoBasedVlanPriority

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.12.47.121.2.4.1.4

bondingprotoBasedVlanVid

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.890.1.5.12.47.121.2.4.1.5

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.47.121.2.4.1.6

bondingprotoBasedVlanState

SNMPv2-TCRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.121.2.4.1.7

mgmdBondingStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.5 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdBondingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mgmdBondingStatusTable'

mgmdBondingStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.5.1

An entry in mgmdBondingStatusTable.

Indexes

mgmdBondingGroupId

Column Syntax OID

mgmdBondingGroupId

The value of Bonding Group ID.

mgmdBondingActiveMcastGroupNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.121.2.5.1.1

The value of active multicast group number for bonding group.

mgmdBondingGroupImmediateLeave

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.121.2.5.1.2

Current multicast immediate leave for Bonding group.
Enable(1),
Disable(2)

mvrVlanID mvrBondingGroupId

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.121.2.5.1.3

mvrBondingStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.6 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrBondingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::mvrBondingStatusTable'

mvrBondingStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.6.1

An entry in xdslBondingMgmdStatusTable.

Indexes

Column Syntax OID

mvrBondingGroupId

The value of Bonding Group ID.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.121.2.6.1.1

mvrBondingPortRole

Current mvr port role for Bonding group.
none(1),
source_port(2)
receiver_port(3)

Enumeration

Enumerated Values:

1	none
2	source_port
3	receiver_port

.1.3.6.1.4.1.890.1.5.12.47.121.2.6.1.2

mvrBondingPortTagging

Current mvr tagging status for Bonding group.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.121.2.6.1.3

ifBondingStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.7 · 1 row entry · 21 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ifBondingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::ifBondingStatusTable'

ifBondingStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.7.1

An entry containing additional management information
applicable to a particular interface.

Indexes

ifBondingGroupId

Column Syntax OID

ifBondingGroupId

The value of Bonding Group ID.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.1

ifBondingGroupActive

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.2

ifBondingInMulticastPkts

The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.
…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.3

ifBondingInBroadcastPkts

The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of…

ifBondingOutMulticastPkts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.4

The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer prot…

ifBondingOutBroadcastPkts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.5

The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.
Discontinuities in …

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.6

ifBondingHCInOctets

The total number of octets received on the interface,
including framing characters. This object is a 64-bit
version of ifInOctets.
Discontinuities in the value of this counter can occur at
re-initialization of the ma…

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.7

ifBondingHCInUcastPkts

The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer. This object is a
64-bit version of ifInUcastPkts.
Discontinu…

ifBondingHCInMulticastPkts

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.8

ifBondingHCInBroadcastPkts

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.9

The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer. This object is a 64-bit version
of ifInBroadcastPkts.
Discontinuities in the …

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.10

ifBondingHCOutOctets

The total number of octets transmitted out of the
interface, including framing characters. This object is a
64-bit version of ifOutOctets.
Discontinuities in the value of this counter can occur at
re-initialization o…

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.11

ifBondingHCOutUcastPkts

The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent. Thi…

ifBondingHCOutMulticastPkts

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.12

ifBondingHCOutBroadcastPkts

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.13

ifBondingLinkUpDownTrapEnable

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.14

Indicates whether linkUp/linkDown traps should be generated
for this interface.
By default, this object should have the value enabled(1) for
interfaces which do not operate on 'top' of any other
interface (as defined in…

ifBondingConnectorPresent

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.15

ifBondingHighSpeed

An estimate of the interface's current bandwidth in units
of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere in
the range of `n-500,000' to `n+499,999'. Fo…

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.16

ifBondingPromiscuousMode

This object has a value of false(2) if this interface only
accepts packets/frames that are addressed to this station.
This object has a value of true(1) when the station accepts
all packets/frames transmitted on the med…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.17

This object has the value 'true(1)' if the interface
sublayer has a physical connector and the value 'false(2)'
otherwise.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.18

ifBondingCounterDiscontinuityTime

The value of sysUpTime on the most recent occasion at which
any one or more of this interface's counters suffered a
discontinuity. The relevant counters are the specific
instances associated with this interface of any …

UtcTimeStamp

Description:

Universal Time Coordinated as a 32-bit value that designates
the number of seconds since Jan 1, 1970 12:00AM.

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.19

ifBondingInDiscards

The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet co…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.20

ifBondingOutDiscards

The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer s…

switchCounterBondingGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.121.2.7.1.21

switchCounterBondingStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.121.2.8 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk switchCounterBondingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::switchCounterBondingStatusTable'

switchCounterBondingStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.121.2.8.1

An entry in switchCounterTable.

Indexes

Column	Syntax	OID
switchCounterBondingGroupId The Bonding Group ID for SwitchCounterBondingStatusEntry.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.8.1.1`
switchBondingUnknownUnicastCounter Unknown unicast counter for the port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.8.1.2`
switchBondingTxRatelimitDropCounter Rx Ratelimit drop counter.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.8.1.3`
switchBondingRxRatelimitDropCounter Tx Ratelimit drop counter.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.8.1.4`
switchBondingRxMeterDropCounter Rx Metering drop counter.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.47.121.2.8.1.5`

macFlushTable

table

.1.3.6.1.4.1.890.1.5.12.47.122.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macFlushTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::macFlushTable'

macFlushEntry row .1.3.6.1.4.1.890.1.5.12.47.122.1.1

An entry in macFlushTable.

Indexes

macFlushPortIndex

Column	Syntax	OID
macFlushPortIndex	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.122.1.1.1`
macFlushPortConfig Set 1 to execute mac flush operation in the specified port, read value will always return 0	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.122.1.1.2`

sfpThresholdTable

table

.1.3.6.1.4.1.890.1.5.12.47.123.2 · 1 row entry · 21 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sfpThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::sfpThresholdTable'

sfpThresholdUserInputEntry row .1.3.6.1.4.1.890.1.5.12.47.123.2.1

An entry in sfpThresholdTable.

Indexes

sfpPortIndex

Column	Syntax	OID
sfpPortIndex sfp port index	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.1`
sfpTempHighAlarmThresh User defined high alarm threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.2`
sfpTempHighWarnThresh User defined high warning threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.3`
sfpTempLowWarnThresh User defined low warning threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.4`
sfpTempLowAlarmThresh User defined low alarm threshold of temperature of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.5`
sfpVoltageHighAlarmThresh User defined high alarm threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.6`
sfpVoltageHighWarnThresh User defined high warning threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.7`
sfpVoltageLowWarnThresh User defined low warning threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.8`
sfpVoltageLowAlarmThresh User defined low alarm threshold of voltage of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.9`
sfpTxBiasHighAlarmThresh User defined high alarm threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.10`
sfpTxBiasHighWarnThresh User defined high warning threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.11`
sfpTxBiasLowWarnThresh User defined low warning threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.12`
sfpTxBiasLowAlarmThresh User defined low alarm threshold of tx bias of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.13`
sfpTxPowerHighAlarmThresh User defined high alarm threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.14`
sfpTxPowerHighWarnThresh User defined high warning threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.15`
sfpTxPowerLowWarnThresh User defined low warning threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.16`
sfpTxPowerLowAlarmThresh User defined low alarm threshold of tx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.17`
sfpRxPowerHighAlarmThresh User defined high alarm threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.18`
sfpRxPowerHighWarnThresh User defined high warning threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.19`
sfpRxPowerLowWarnThresh User defined low warning threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.20`
sfpRxPowerLowAlarmThresh User defined low alarm threshold of rx power of sfp port	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.47.123.2.1.21`

inbandSviIpv6SettingTable

table

.1.3.6.1.4.1.890.1.5.12.47.124.6.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandSviIpv6SettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::inbandSviIpv6SettingTable'

inbandSviIpv6Entry row .1.3.6.1.4.1.890.1.5.12.47.124.6.1.1

An entry in inbandSviIpv6InfoTable.

Indexes

inbandSviVid

Column Syntax OID

inbandSviVid

IPv6 SVI Interface VID.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.1

inbandSviIpv6Active

Enable IPv6 Active.

inbandSviIpv6AddrAutoConfig

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.2

Enable Stateless Address Autoconfiguration Active.

inbandSviIpv6LinkLocalAddrType

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.3

IPv6 Link Local Address Type.

inbandSviIpv6DefaultLinkLocalAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.4

IPv6 Link Local Address.

inbandSviIpv6DefaultGatewayType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.5

IPv6 Default Gateway Type.

inbandSviIpv6DefaultGateway

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.6

IPv6 Default Gateway.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.7

inbandSviRowStatus

inbandIpv6StaticAddrVid inbandIpv6StaticAddrAddrType inbandIpv6StaticAddrAddr inbandIpv6StaticAddrAddrPrefixLength inbandIpv6StaticAddrEUI64

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.6.1.1.8

inbandIpv6StaticAddrTable

table

.1.3.6.1.4.1.890.1.5.12.47.124.6.2 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandIpv6StaticAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::inbandIpv6StaticAddrTable'

inbandIpv6StaticAddrEntry row .1.3.6.1.4.1.890.1.5.12.47.124.6.2.1

An entry in inbandIpv6StaticAddrTable.

Indexes

Column Syntax OID

inbandIpv6StaticAddrVid

IPv6 Static Address Interface VID.

inbandIpv6StaticAddrAddrType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.6.2.1.1

The address type of ipAddressAddr.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.124.6.2.1.2

inbandIpv6StaticAddrAddr

IPv6 Static Address.

inbandIpv6StaticAddrAddrPrefixLength

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.6.2.1.3

IPv6 Static Address Prefix Length.

inbandIpv6StaticAddrEUI64

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.6.2.1.4

Enable EUI-64 Active.

inbandIpv6StaticAddrAddrStatus

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.124.6.2.1.5

The Status of IPv6 Static Address.

Enumeration

Enumerated Values:

1	preferred
2	deprecated
3	invalid
4	inaccessible
5	unknown
6	tentative
7	duplicate

.1.3.6.1.4.1.890.1.5.12.47.124.6.2.1.6

inbandIpv6StaticAddrRowStatus

IPv6 Static Address rowstatus.

inbandIpv6NeighborCacheVid inbandIpv6NeighborCacheIpv6Addr inbandIpv6NeighborCacheMACAddr

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.6.2.1.7

inbandIpv6NeighborCacheTable

table

.1.3.6.1.4.1.890.1.5.12.47.124.7.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandIpv6NeighborCacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::inbandIpv6NeighborCacheTable'

inbandIpv6NeighborCacheEntry row .1.3.6.1.4.1.890.1.5.12.47.124.7.1.1

An entry in ipv6NeighborCacheTable.

Indexes

Column Syntax OID

inbandIpv6NeighborCacheVid

Show inband IPv6 VID

inbandIpv6NeighborCacheIpv6Addr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.7.1.1.1

Show IPv6 neighbor IPv6 Address

inbandIpv6NeighborCacheMACAddr

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.7.1.1.2

Show IPv6 neighbor MAC Address

inbandIpv6NeighborCacheState

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.7.1.1.3

Show IPv6 neighbor connection state

Enumeration

Enumerated Values:

1	invalid
2	incomplete
3	reachable
4	stable
5	delay
6	probe
7	unknown

.1.3.6.1.4.1.890.1.5.12.47.124.7.1.1.4

inbandIpv6NeighborCacheType

Show IPv6 neighbor connection type

Enumeration

Enumerated Values:

1	local
2	dynamic
3	static
4	other

.1.3.6.1.4.1.890.1.5.12.47.124.7.1.1.5

inbandIpv6NeighborCacheRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.7.1.1.6

outbandSviIpv6SettingTable

table

.1.3.6.1.4.1.890.1.5.12.47.124.8.1 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk outbandSviIpv6SettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::outbandSviIpv6SettingTable'

outbandSviIpv6Entry row .1.3.6.1.4.1.890.1.5.12.47.124.8.1.1

An entry in outbandSviIpv6InfoTable.

Indexes

outbandEntrySviIfNum

Column Syntax OID

outbandEntrySviIfNum

Outband IPv6 SVI Interface Number.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.1

outbandSviIpv6Active

Enable IPv6 Active.

outbandSviIpv6AddrAutoConfig

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.2

Enable Stateless Address Autoconfiguration Active.

outbandSviIpv6LinkLocalAddrType

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.3

IPv6 Link Local Address Type.

outbandSviIpv6DefaultLinkLocalAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.4

IPv6 Link Local Address.

outbandSviIpv6DefaultGatewayType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.5

IPv6 Default Gateway Type.

outbandSviIpv6DefaultGateway

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.6

IPv6 Default Gateway.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.7

outbandSviRowStatus

outbandIpv6StaticAddrIfNum outbandIpv6StaticAddrAddrType outbandIpv6StaticAddrAddr outbandIpv6StaticAddrAddrPrefixLength outbandIpv6StaticAddrEUI64

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.8.1.1.8

outbandIpv6StaticAddrTable

table

.1.3.6.1.4.1.890.1.5.12.47.124.8.2 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk outbandIpv6StaticAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::outbandIpv6StaticAddrTable'

outbandIpv6StaticAddrEntry row .1.3.6.1.4.1.890.1.5.12.47.124.8.2.1

An entry in outbandIpv6StaticAddrTable.

Indexes

Column Syntax OID

outbandIpv6StaticAddrIfNum

Outband IPv6 Static Address Interface Number.

outbandIpv6StaticAddrAddrType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.8.2.1.1

The address type of ipAddressAddr.

outbandIpv6StaticAddrAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.124.8.2.1.2

IPv6 Static Address.

outbandIpv6StaticAddrAddrPrefixLength

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.8.2.1.3

IPv6 Static Address Prefix Length.

outbandIpv6StaticAddrEUI64

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.8.2.1.4

Enable EUI-64 Active.

outbandIpv6StaticAddrAddrStatus

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.124.8.2.1.5

The Status of IPv6 Static Address.

Enumeration

Enumerated Values:

1	preferred
2	deprecated
3	invalid
4	inaccessible
5	unknown
6	tentative
7	duplicate

.1.3.6.1.4.1.890.1.5.12.47.124.8.2.1.6

outbandIpv6StaticAddrRowStatus

IPv6 Static Address rowstatus.

outbandIpv6NeighborCacheIfNum outbandIpv6NeighborCacheIpv6Addr outbandIpv6NeighborCacheMACAddr

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.8.2.1.7

outbandIpv6NeighborCacheTable

table

.1.3.6.1.4.1.890.1.5.12.47.124.9.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk outbandIpv6NeighborCacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::outbandIpv6NeighborCacheTable'

outbandIpv6NeighborCacheEntry row .1.3.6.1.4.1.890.1.5.12.47.124.9.1.1

An entry in ipv6NeighborCacheTable.

Indexes

Column Syntax OID

outbandIpv6NeighborCacheIfNum

Show outband IPv6 interface number

outbandIpv6NeighborCacheIpv6Addr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.124.9.1.1.1

Show IPv6 neighbor IPv6 Address

outbandIpv6NeighborCacheMACAddr

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.124.9.1.1.2

Show IPv6 neighbor MAC Address

outbandIpv6NeighborCacheState

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.9.1.1.3

Show IPv6 neighbor connection state

Enumeration

Enumerated Values:

1	invalid
2	incomplete
3	reachable
4	stable
5	delay
6	probe
7	unknown

.1.3.6.1.4.1.890.1.5.12.47.124.9.1.1.4

outbandIpv6NeighborCacheType

Show IPv6 neighbor connection type

Enumeration

Enumerated Values:

1	local
2	dynamic
3	static
4	other

.1.3.6.1.4.1.890.1.5.12.47.124.9.1.1.5

outbandIpv6NeighborCacheRowStatus

pathMtuDiscoveryDestinationAddressType pathMtuDiscoveryDestinationAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.124.9.1.1.6

inbandNdpTable

table

.1.3.6.1.4.1.890.1.5.12.47.125.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandNdpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::inbandNdpTable'

inbandNdpEntry row .1.3.6.1.4.1.890.1.5.12.47.125.1.1

An entry in ndpTable.

Indexes

inbandNdpVid

Column	Syntax	OID
inbandNdpVid NDP Interface Vid.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.1.1.1`
inbandNdpDADAttempts NDP DAD Attempts.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.1.1.2`
inbandNdpNSInterval NDP NS Interval.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.1.1.3`
inbandNdpReachableTime NDP Reachable Time.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.1.1.4`

outbandNdpTable

table

.1.3.6.1.4.1.890.1.5.12.47.125.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk outbandNdpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::outbandNdpTable'

outbandNdpEntry row .1.3.6.1.4.1.890.1.5.12.47.125.2.1

An entry in ndpTable.

Indexes

outbandNdpIfNum

Column	Syntax	OID
outbandNdpIfNum NDP Outband Interface Num.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.2.1.1`
outbandNdpDADAttempts NDP DAD Attempts.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.2.1.2`
outbandNdpNSInterval NDP NS Interval.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.2.1.3`
outbandNdpReachableTime NDP Reachable Time.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.125.2.1.4`

pathMtuTable

table

.1.3.6.1.4.1.890.1.5.12.47.126.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pathMtuTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::pathMtuTable'

The table keeps track of the inforamtion of each Packet Too Big error message and sets a timer for aging each entry.

pathMtuEntry row .1.3.6.1.4.1.890.1.5.12.47.126.1.1

An entry in the mldSnoopingProxyVlanTable.

Indexes

Column Syntax OID

pathMtuDiscoveryDestinationAddressType

The destination address type in the message body of ICMPv6 Packet Too Big error message.

pathMtuDiscoveryDestinationAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.890.1.5.12.47.126.1.1.1

The destination address in the message body of ICMPv6 Packet Too Big error message.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.47.126.1.1.2

pathMtuDiscoveryMTU

The MTU in the ICMPv6 Packet Too Big error message.

pathMtuDiscoveryExpiredTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.126.1.1.3

The aging time of each entry in the path MTU discovery table.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.47.126.1.1.4

dhcpv6LdraTable

table

.1.3.6.1.4.1.890.1.5.12.47.127.1 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpv6LdraTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpv6LdraTable'

The table keeps track of the LDRA information.

ldraEntry row .1.3.6.1.4.1.890.1.5.12.47.127.1.1

An entry in the LdraTable.

Indexes

ldraVlanID

Column Syntax OID

ldraVlanID

LDRA relay in this VLAN.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.1

ldraEnable

Enable LDRA in this VLAN.

ldraOptionInterfaceIDEnable

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.2

Enable relay agent option of Interface-ID to appending to outgoing DHCP packets.

ldraOptionInterfaceIDData

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.3

Set relay agent option of Interface-ID to appending to outgoing DHCP packets.

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.4

ldraOptionRemoteIDEnable

Enable relay agent option of Remote-ID to appending to outgoing DHCP packets.

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.5

ldraOptionRemoteIDData

Set relay agent option of Remote-ID to appending to outgoing DHCP packets.

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.6

ldraClientFacingPortList

Setup LDRA client-facing interface.

ldraNetworkFacingPortList

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.7

Setup LDRA network-facing interface.

ldraUntrustClientPortList

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.8

Setup LDRA untrust client interface.

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.9

ldraRowStatus

dhcpv6RelayCounterEntryPort

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.47.127.1.1.10

dhcpv6RelayCounterTable

table

.1.3.6.1.4.1.890.1.5.12.47.127.2 · 1 row entry · 14 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpv6RelayCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpv6RelayCounterTable'

Show DHCPv6 Relay packet counter on client-facing.

dhcpv6RelayCounterEntry row .1.3.6.1.4.1.890.1.5.12.47.127.2.1

Indexes

Column	Syntax	OID
dhcpv6RelayCounterEntryPort	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.1`
dhcpv6SolicitMsgCnt The total number of DHCPv6 Solicit messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.2`
dhcpv6AdvertiseMsgCnt The total number of DHCPv6 Advertise messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.3`
dhcpv6RequestMsgCnt The total number of DHCPv6 Request messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.4`
dhcpv6ConfirmMsgCnt The total number of DHCPv6 Confirm messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.5`
dhcpv6RenewMsgCnt The total number of DHCPv6 Renew messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.6`
dhcpv6RebindMsgCnt The total number of DHCPv6 Rebind messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.7`
dhcpv6ReplyMsgCnt The total number of DHCPv6 Reply messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.8`
dhcpv6ReleaseMsgCnt The total number of DHCPv6 Release messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.9`
dhcpv6DeclineMsgCnt The total number of DHCPv6 Decline messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.10`
dhcpv6ReconfigureMsgCnt The total number of DHCPv6 Reconfigure messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.11`
dhcpv6InfoReqMsgCnt The total number of DHCPv6 Information Request messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.12`
dhcpv6RelayForwMsgCnt The total number of DHCPv6 Relay-Forward messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.13`
dhcpv6RelayReplyMsgCnt The total number of DHCPv6 Relay-Reply Request messages on this interface.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.47.127.2.1.14`

dhcpv6SnpPortTable

table

.1.3.6.1.4.1.890.1.5.12.47.128.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpv6SnpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::dhcpv6SnpPortTable'

dhcpv6SnpPortEntry row .1.3.6.1.4.1.890.1.5.12.47.128.1.1

Indexes

dhcpv6SnpPortEntryPort

Column	Syntax	OID
dhcpv6SnpPortEntryPort	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.47.128.1.1.1`
dhcpv6SnpPortEntryRate 0 means unlimited	Integer32r/w Constraints: `range: 0-2048`	`.1.3.6.1.4.1.890.1.5.12.47.128.1.1.2`

errdisableRecoveryReasonTable

table

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk errdisableRecoveryReasonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::errdisableRecoveryReasonTable'

errdisableRecoveryReasonEntry row .1.3.6.1.4.1.890.1.5.12.47.130.1.1.2.1

Indexes

errdisableRecoveryReason

Column Syntax OID

errdisableRecoveryReason

Enumeration

Enumerated Values:

1	arp
2	bpdu

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.2.1.1

errdisableRecoveryReasonActive

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.2.1.2

errdisableRecoveryReasonInterval

Integer32r/w

Constraints:
range: 30-2592000

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.2.1.3

errdisableRecoveryIfStatusTable

table

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk errdisableRecoveryIfStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::errdisableRecoveryIfStatusTable'

errdisableRecoveryIfStatusEntry row .1.3.6.1.4.1.890.1.5.12.47.130.1.1.3.1

Indexes

errdisableRecoveryIfStatusReason errdisableRecoveryIfStatusPort

Column Syntax OID

errdisableRecoveryIfStatusReason

Enumeration

Enumerated Values:

1	arp
2	bpdu

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.3.1.1

errdisableRecoveryIfStatusPort

errdisableRecoveryIfStatusTimeToRecover

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.3.1.2

If reason dectect is inactive, this value would be -1

Integer32

Constraints:
range: -1-2592000

.1.3.6.1.4.1.890.1.5.12.47.130.1.1.3.1.3

errdisableDetectReasonTable

table

.1.3.6.1.4.1.890.1.5.12.47.130.2.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk errdisableDetectReasonTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::errdisableDetectReasonTable'

errdisableDetectReasonEntry row .1.3.6.1.4.1.890.1.5.12.47.130.2.1.1

An entry in errdisableDetectReasonTable.

Indexes

errdisableDetectReason

Column Syntax OID

errdisableDetectReason

Enumeration

Enumerated Values:

1	arp
2	bpdu

.1.3.6.1.4.1.890.1.5.12.47.130.2.1.1.1

errdisableDetectReasonEnable

errdisableDetectReasonMode

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.890.1.5.12.47.130.2.1.1.2

Enumerationr/w

Enumerated Values:

2	inactive-reason
3	rate-limitation

.1.3.6.1.4.1.890.1.5.12.47.130.2.1.1.3

cpuProtectionTable

table

.1.3.6.1.4.1.890.1.5.12.47.131.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cpuProtectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1724-56-Fanless-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1724-56-Fanless-MIB::cpuProtectionTable'

cpuProtectionEntry row .1.3.6.1.4.1.890.1.5.12.47.131.1.1

An entry in CPUProtectionTable.

Indexes

cpuProtectionPort cpuProtectionReason

Column Syntax OID

cpuProtectionPort

The Protected Port