ZYXEL-DHCPV6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
23

zyxelDhcpv6RelayTable

table
.1.3.6.1.4.1.890.1.15.3.21.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelDhcpv6RelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-DHCPV6-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-DHCPV6-MIB::zyxelDhcpv6RelayTable' 
The table contains DHCPv6 relay configuration.
zyxelDhcpv6RelayEntry row .1.3.6.1.4.1.890.1.15.3.21.1.2.1
An entry contains DHCPv6 relay configuration.
Indexes
Column Syntax OID
zyDhcpv6RelayVid
Enter the VLAN ID to which these DHCPv6 relay settings apply.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.21.1.2.1.1
zyDhcpv6RelayHelperIpAddress
Enter the IPv4/IPv6 address of a DHCPv6 server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.21.1.2.1.2
zyDhcpv6RelayHelperIpAddressType
Enter the type of DHCPv6 relay helper address.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.15.3.21.1.2.1.3
zyDhcpv6RelayOptionIfIdState
Enable/Disable the switch to add interface ID option in DHCPv6 requests from the clients
in the specified VLAN before the switch forwards them to a DHCP server.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.21.1.2.1.4
zyDhcpv6RelayOptionRemoteIdData
Set the switch to add the remote-ID option in the DHCPv6 requests from the clients
in the specified VLAN before the switch forwards them to a DHCP server.
This also specifies a string (up to 64 printable ASCII charact…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.21.1.2.1.5
zyDhcpv6RelayRowStatus
This object allows DHCPv6 relay entries to be created and deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.21.1.2.1.6

zyxelDhcpv6ClientTable

table
.1.3.6.1.4.1.890.1.15.3.21.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelDhcpv6ClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-DHCPV6-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-DHCPV6-MIB::zyxelDhcpv6ClientTable' 
The table contains DHCPv6 client configuration.
zyxelDhcpv6ClientEntry row .1.3.6.1.4.1.890.1.15.3.21.1.3.1
An entry contains DHCPv6 client configuration.
Indexes
Column Syntax OID
zyDhcpv6ClientIfIndex
DHCPv6 client interface index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.21.1.3.1.1
zyDhcpv6ClientIaType
Enable/Disable the switch to get a non-temporary IP address from the DHCP server.
Enumerationr/w
Enumerated Values:
0none
1iana
 .1.3.6.1.4.1.890.1.15.3.21.1.3.1.2
zyDhcpv6ClientIaTypeRapidCommit
Enable/Disable the switch to send its DHCPv6 solicit message with a rapid commit option
to obtain information from the DHCP server by a rapid two-message exchange.
The switch discards any reply message that does not i…
Enumerationr/w
Enumerated Values:
0none
1rapidCommit
 .1.3.6.1.4.1.890.1.15.3.21.1.3.1.3
zyDhcpv6ClientOptionDnsState
Enable/Disable DHCPv6 client DNS option is means add DNS option to DHCPv6 client requests.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.21.1.3.1.4
zyDhcpv6ClientOptionDomainListState
Enable/Disable DHCPv6 client Domain-List option is means add domain list information to DHCPv6 client requests.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.21.1.3.1.5
zyDhcpv6ClientInfoRefreshMinimum
Sets the time interval (in seconds) at which the switch exchanges other configuration information with a DHCPv6 server again.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.15.3.21.1.3.1.6

zyxelDhcpv6ServerTable

table
.1.3.6.1.4.1.890.1.15.3.21.1.5 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelDhcpv6ServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-DHCPV6-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-DHCPV6-MIB::zyxelDhcpv6ServerTable' 
The table contains DHCPv6 server configuration.
zyxelDhcpv6ServerInfoEntry row .1.3.6.1.4.1.890.1.15.3.21.1.5.1
An entry contains DHCPv6 server configuration.
Indexes
Column Syntax OID
zyDhcpv6ServerInfoIfIndex
DHCPv6 server interface index.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.890.1.15.3.21.1.5.1.1
zyDhcpv6ServerInfoDNSServerIpAddress
Enter the IPv6 address of a DNS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.21.1.5.1.2
zyDhcpv6ServerInfoRefreshTime
Sets the time interval of DHCPv6 server refresh time option.
Unsigned32r/w
Constraints:
range: 0-0
range: 600-4294967295
 .1.3.6.1.4.1.890.1.15.3.21.1.5.1.3
zyDhcpv6ServerInfoRowStatus
This object allows DHCPv6 server entries to be created and deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.21.1.5.1.100

zyxelDhcpv6PDTable

table
.1.3.6.1.4.1.890.1.15.3.21.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelDhcpv6PDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-DHCPV6-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-DHCPV6-MIB::zyxelDhcpv6PDTable' 
The table contains DHCPv6 server prefix delegation configuration.
zyxelDhcpv6ServerPDEntry row .1.3.6.1.4.1.890.1.15.3.21.1.7.1
An entry contains DHCPv6 server configuration.
Indexes
Column Syntax OID
zyDhcpv6ServerPDClientDUID
The client DUID of the DHCPv6 Server Prefix Delegation entries.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.21.1.7.1.1
zyDhcpv6ServerPDClientName
The client name of the DHCPv6 Server Prefix Delegation entries.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.21.1.7.1.2
zyDhcpv6ServerPDIfIndex
DHCPv6 Server interface index.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.21.1.7.1.3
zyDhcpv6ServerPDPrefix
Enter the IPv6 prefix of a DHCPv6 server Prefix Delegation entry.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.21.1.7.1.4
zyDhcpv6ServerPDPrefixLength
Enter the IPv6 prefix Length of a DHCPv6 server Prefix Delegation entry.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.890.1.15.3.21.1.7.1.5
zyDhcpv6ServerPDRowStatus
This object allows DHCPv6 Server Prefix Delegation entries to be created and deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.21.1.7.1.100

zyxelDhcpv6ClientInfoTable

table
.1.3.6.1.4.1.890.1.15.3.21.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelDhcpv6ClientInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-DHCPV6-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-DHCPV6-MIB::zyxelDhcpv6ClientInfoTable' 
The table contains DHCPv6 client information.
zyxelDhcpv6ClientInfoEntry row .1.3.6.1.4.1.890.1.15.3.21.2.1.1
An entry contains DHCPv6 client information.
Indexes
Column Syntax OID
zyDhcpv6ClientInfoRestart
Set the switch to send a release message for the assigned IPv6 address to
the DHCP server and start DHCP messages exchange again.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.21.2.1.1.1