ZXR10-MPLS-TE-MIB Table View

The mplsTunnelTable allows new MPLS tunnels to be
created between an LSR and a remote endpoint, and
existing tunnels to be reconfigured or removed.
Note that only point-to-point tunnel segments are
supported, although multipoint-to-point and pointto-
multipoint connections are supported by an LSR
acting as a cross-connect. Each MPLS tunnel can
thus have one out-segment originating at this LSR
and/or one in-segment terminating at this LSR.

zxr10MplsTunnelEntry row .1.3.6.1.4.1.3902.3.315.1.2.1.1

An entry in this table represents an MPLS tunnel.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signalling protocol. Whenever a new entry is
created with zxr10MplsTunnel…

Indexes

zxr10MplsTunnelIndex zxr10MplsTunnelInstance

Column	Syntax	OID
zxr10MplsTunnelIndex Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading zxr10MplsTunnelIndexNext. When the MPLS signalling pro…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.1
zxr10MplsTunnelInstance Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS sign…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.2
zxr10MplsTunnelIngressLSRId Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender Address in the Sender Template object and MAY be equal to t…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.2.1.1.3
zxr10MplsTunnelEgressLSRId Identity of the egress LSR associated with this tunnel instance.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.2.1.1.4
zxr10MplsTunnelOutLabel Out label of local tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.5
zxr10MplsTunnelOutIntf The name of out interface that local tunnel transits.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.6
zxr10MplsTunnelName The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.7
zxr10MplsTunnelDescr A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object is may not be signaled by MPLS signaling protocols, consequentally the …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.8
zxr10MplsTunnelIsIfobsolete Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interface corresponding to this tunnel sho…	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.2.1.1.9
zxr10MplsTunnelIfIndex If zxr10MplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that…	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.3902.3.315.1.2.1.1.10
zxr10MplsTunnelIfType Type of tunnel interface.	Enumeration Enumerated Values: 0 unassigned 1 ipAddress 2 unnumbered	.1.3.6.1.4.1.3902.3.315.1.2.1.1.11
zxr10MplsTunnelIfAddrOrName Ip address or loopback name of tunnel interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.12
zxr10MplsTunnelIfMaskOrIndex Subnet mask or loopback interface index of tunnel interface	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.13
zxr10MplsTunnelOwner Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow.	Enumeration Enumerated Values: 1 unknown 2 other 3 snmp 4 ldp 5 crldp 6 rsvpTe 7 policyAgent	.1.3.6.1.4.1.3902.3.315.1.2.1.1.14
zxr10MplsTunnelRole This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel…	Enumeration Enumerated Values: 1 head 2 transit 3 tail 4 headTail	.1.3.6.1.4.1.3902.3.315.1.2.1.1.15
zxr10MplsTunnelSignallingProto The signalling protocol, if any, used to setup this tunnel.	Enumeration Enumerated Values: 1 none 2 rsvp 3 crldp 4 other	.1.3.6.1.4.1.3902.3.315.1.2.1.1.16
zxr10MplsTunnelSetupPrio Indicates the setup priority of this tunnel.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.3902.3.315.1.2.1.1.17
zxr10MplsTunnelHoldingPrio Indicates the holding priority for this tunnel.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.3902.3.315.1.2.1.1.18
zxr10MplsTunnelSessionAttributes This bit mask indicates optional session values for this tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.19
zxr10MplsTunnelFrrEnableobsolete If this tunnel enables FRR,this value is true,otherwise it is false.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.2.1.1.20
zxr10MplsTunnelResourcePointer This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the zxr10MplsTunnelResourceEntry to indicate which zxr10MplsTunnelResourceEntry is to be ass…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.21
zxr10MplsTunnelPrimaryInstance Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be found in the description of the TEXTUAL-CONVENTION MplsTunne…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.22
zxr10MplsTunnelInstancePriority This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsTunnelI…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.23
zxr10MplsTunnelHopTableIndex Index into the zxr10MplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.24
zxr10MplsTunnelPathInUse This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into zxr10MplsTunnelHopTable. This path may not exactly match the one in zxr10MplsTunnelARHopTable due to t…	Unsigned32 Constraints: range: 0-16	.1.3.6.1.4.1.3902.3.315.1.2.1.1.25
zxr10MplsTunnelARHopTableIndex Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actual hops becomes available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.26
zxr10MplsTunnelCHopTableIndex Index into the zxr10MplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when computed hops become available or when computed hops get modified.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.27
zxr10MplsTunnelTotalUpTime This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.28
zxr10MplsTunnelInstanceUpTime This value identifies the total time that this tunnel instance's operStatus has been Up(1).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.29
zxr10MplsTunnelPrimaryUpTime Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsTunnelPrimaryInstance.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.30
zxr10MplsTunnelPathChanges Specifies the number of times the actual path for this tunnel instance has changed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.31
zxr10MplsTunnelLastPathChange Specifies the time since the last change to the actual path for this tunnel instance.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.32
zxr10MplsTunnelCreationTime Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsTunnelOperStatus was first set to up(1).	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.33
zxr10MplsTunnelStateTransitions Specifies the number of times the state (zxr10MplsTunnelOperStatus) of this tunnel instance has changed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.34
zxr10MplsTunnelAdminStatus Indicates the desired operational status of this tunnel.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.3902.3.315.1.2.1.1.35
zxr10MplsTunnelOperStatus Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.3902.3.315.1.2.1.1.36
zxr10MplsTunnelRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelAdminStatus, zxr10Mpl…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.315.1.2.1.1.37
zxr10MplsTunnelStorageType The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.3902.3.315.1.2.1.1.38
zxr10MplsTunnelAutorouteEnableobsolete If this object is true, then it enables the Autoroute.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.2.1.1.39
zxr10MplsTunnelAutorouteMetricTypeobsolete Indicates the autoroute metric type over this tunnel.	Enumeration Enumerated Values: 0 igp 1 defaultAbsolute 2 absolute 3 relative	.1.3.6.1.4.1.3902.3.315.1.2.1.1.40
zxr10MplsTunnelAutorouteMetricRelativeValueobsolete Indicates the value that adjust metric for autoroutes relative to IGP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.315.1.2.1.1.41
zxr10MplsTunnelAutorouteMetricAbsoluteValueobsolete Indicates the value for all autoroutes over tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.42
zxr10MplsTunnelRecordRouteEnableobsolete If this object is true, then it enables the RecordRoute	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.2.1.1.43
zxr10MplsTunnelCACStatus CAC switch status	Enumeration Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.3902.3.315.1.2.1.1.44
zxr10MplsTunnelLspOctets The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, wh…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.3.315.1.2.1.1.45
zxr10MplsTunnelLspPackets The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, w…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.3.315.1.2.1.1.46
zxr10MplsTunnelLspLastTransition The time in 10-millisecond units since the last transition occurred on this LSP.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.3902.3.315.1.2.1.1.47
zxr10MplsTunnelLspConfiguredPaths The number of paths configured for this LSP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.315.1.2.1.1.48
zxr10MplsTunnelPathType The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless mplsPathName is not empty	Enumeration Enumerated Values: 1 other 2 primary	.1.3.6.1.4.1.3902.3.315.1.2.1.1.49
zxr10MplsTunnelPathExplicitRoute The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the forma…	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.3902.3.315.1.2.1.1.50
zxr10MplsTunnelPathRecordRoute The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX <space> repeated for each address. This field is meaningless unless mp…	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.3902.3.315.1.2.1.1.51
zxr10MplsTunnelPathCOS The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label wi…	Integer32 Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.3.315.1.2.1.1.52
zxr10MplsTunnelPathInclude This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have col…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.315.1.2.1.1.53
zxr10MplsTunnelPathExclude This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have col…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.315.1.2.1.1.54
zxr10MplsTunnelHotStandbyEnableobsolete If this object is true, then it enables hotstandby.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.2.1.1.55
zxr10MplsTunnelHotStandbyPrimaryPathOptionobsolete Specifies the pathOption of protected LSP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.56
zxr10MplsTunnelHotStandbySecondaryPathOptionobsolete Specifies the pathOption of hotstandby LSP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.57
zxr10MplsTunnelHotStandbyInstance Uniquely identifies the tunnel instance of hotstandby lsp.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.315.1.2.1.1.58
zxr10MplsTunnelHotStandbyState Specifies the hotstandby state of the tunnel.	Enumeration Enumerated Values: 0 unready 1 ready 2 active	.1.3.6.1.4.1.3902.3.315.1.2.1.1.59
zxr10MplsTunnelBfdEnableobsolete If this object is true, then it enables bfd on the tunnel.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.2.1.1.60
zxr10MplsTunnelBFDmultobsolete The detecting multiple of receive/send CONTROL message.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.61
zxr10MplsTunnelBFDminTxIntervalobsolete The minimal time to send CONTROL message.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.62
zxr10MplsTunnelBFDminRxIntervalobsolete The minimal time to receive CONTROL message.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.63
zxr10MplsTunnelBFDstatus The status of bfd.	Enumeration Enumerated Values: 0 bfddisconnect 1 bfddown 2 bfdup	.1.3.6.1.4.1.3902.3.315.1.2.1.1.64
zxr10MplsTunnelFrrProtectionMethodobsolete Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass protection exists. oneToOneBackup(2) indicates detour …	Enumeration Enumerated Values: 0 unknown 1 facilityBackup 2 oneToOneBackup	.1.3.6.1.4.1.3902.3.315.1.2.1.1.65
zxr10MplsTunnelBandwidth Specifies the bandwidth of the tunnel.	kilobits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.66
zxr10MplsTunnelSubPoolBandwidth Specifies the sub pool bandwidth of the tunnel.	kilobits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.67
zxr10MplsTunnelIgpMetric The value of igp metric is used for build tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.68
zxr10MplsTunnelTeMetric The value of te metric is used for build tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.2.1.1.69
zxr10MplsTunnelBFDSlaveStatus The status of slave lsp bfd.	Enumeration Enumerated Values: 0 bfddisconnect 1 bfddown 2 bfdup	.1.3.6.1.4.1.3902.3.315.1.2.1.1.70
zxr10MplsTunnelAssociateStatus The associate bidirect status of this tunnel.	Enumeration Enumerated Values: 1 disabled 2 unbound 3 bound	.1.3.6.1.4.1.3902.3.315.1.2.1.1.71

The Mpls Remote Tunnel Table

zxr10MplsRemoteTunnelEntry row .1.3.6.1.4.1.3902.3.315.1.3.1.1

An entry in this table represents an MPLS remote tunnel.

Indexes

zxr10MplsRemoteTunnelIndex zxr10MplsRemoteTunnelInstance zxr10MplsRemoteTunnelIngressLSRId zxr10MplsRemoteTunnelEgressLSRId

Column	Syntax	OID
zxr10MplsRemoteTunnelIndex Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.1
zxr10MplsRemoteTunnelInstance Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.2
zxr10MplsRemoteTunnelIngressLSRId Identity of the ingress LSR associated with this tunnel instance.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.3.1.1.3
zxr10MplsRemoteTunnelEgressLSRId Identity of the egress LSR associated with this tunnel instance.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.3.1.1.4
zxr10MplsRemoteTunnelInLabel In label of Remote tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.5
zxr10MplsRemoteTunnelOutLabel Out label of Remote tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.6
zxr10MplsRemoteTunnelInIntf The name of in interface that remote tunnel transits.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.3.1.1.7
zxr10MplsRemoteTunnelOutIntf The name of out interface that remote tunnel transits.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.3.1.1.8
zxr10MplsRemoteTunnelName The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsRemoteTunnelIsIf is set to true then the ifName of the interface corresponding to this …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.3.1.1.9
zxr10MplsRemoteTunnelIsIf Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interface corresponding to this tunnel sho…	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.3.1.1.11
zxr10MplsRemoteTunnelOwner Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow.	Enumeration Enumerated Values: 1 unknown 2 other 3 snmp 4 ldp 5 crldp 6 rsvpTe 7 policyAgent	.1.3.6.1.4.1.3902.3.315.1.3.1.1.12
zxr10MplsRemoteTunnelRole This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel…	Enumeration Enumerated Values: 1 head 2 transit 3 tail 4 headTail	.1.3.6.1.4.1.3902.3.315.1.3.1.1.13
zxr10MplsRemoteTunnelSignallingProto The signalling protocol, if any, used to setup this tunnel.	Enumeration Enumerated Values: 1 none 2 rsvp 3 crldp 4 other	.1.3.6.1.4.1.3902.3.315.1.3.1.1.14
zxr10MplsRemoteTunnelSetupPrio Indicates the setup priority of this tunnel.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.3902.3.315.1.3.1.1.15
zxr10MplsRemoteTunnelHoldingPrio Indicates the holding priority for this tunnel.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.3902.3.315.1.3.1.1.16
zxr10MplsRemoteTunnelSessionAttributes This bit mask indicates optional session values for this tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.3.1.1.17
zxr10MplsRemoteTunnelLocalProtectInUse Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over).	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.3.1.1.18
zxr10MplsRemoteTunnelPrimaryInstance Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be found in the description of the TEXTUAL-CONVENTION MplsTunne…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.19
zxr10MplsRemoteTunnelInstancePriority This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsRemoteT…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.20
zxr10MplsRemoteTunnelTotalUpTime This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.21
zxr10MplsRemoteTunnelInstanceUpTime This value identifies the total time that this tunnel instance's operStatus has been Up(1).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.22
zxr10MplsRemoteTunnelPrimaryUpTime Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsRemoteTunnelPrimaryInstance.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.23
zxr10MplsRemoteTunnelCreationTime Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsRemoteTunnelOperStatus was first set to up(1).	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.3902.3.315.1.3.1.1.26
zxr10MplsRemoteTunnelAdminStatus Indicates the desired operational status of this tunnel.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.3902.3.315.1.3.1.1.28
zxr10MplsRemoteTunnelOperStatus Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.3902.3.315.1.3.1.1.29
zxr10MplsRemoteTunnelRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsRemoteTunnelAdminStatus, zx…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.315.1.3.1.1.30
zxr10MplsRemoteTunnelStorageType The storage type for this tunnel entry. Conceptual rows having the value 'permanen' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.3902.3.315.1.3.1.1.31
zxr10MplsRemoteTunnelPathExplicitRoute The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the forma…	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.3902.3.315.1.3.1.1.32
zxr10MplsRemoteTunnelPathRecordRoute The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX <space> repeated for each address. This field is meaningless unless mp…	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.3902.3.315.1.3.1.1.33
zxr10MplsRemoteTunnelFrrProtectionMethod Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass protection exists. oneToOneBackup(2) indicates detour …	Enumeration Enumerated Values: 0 unknown 1 facilityBackup 2 oneToOneBackup	.1.3.6.1.4.1.3902.3.315.1.3.1.1.34
zxr10MplsRemoteTunnelARHopTableIndex Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the remote tunnel. This is automatically updated by the agent when the actual hops becomes available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.3.1.1.35
zxr10MplsRemoteTunnelLspInOctets The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, wh…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.3.315.1.3.1.1.36
zxr10MplsRemoteTunnelLspInPackets The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, w…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.3.315.1.3.1.1.37

The zxr10MplsTunnelHopTable is used to indicate the hops,
strict or loose, for an instance of an MPLS tunnel
defined in zxr10MplsTunnelTable, when it is established
via signalling, for the outgoing direction of the
tunnel.

zxr10MplsTunnelHopEntry row .1.3.6.1.4.1.3902.3.315.1.4.1.1

An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signaled ERLSP set up by an MPLS signalling
protocol.

Indexes

zxr10MplsTunnelHopListIndex zxr10MplsTunnelHopPathOptionIndex zxr10MplsTunnelHopIndex

Column	Syntax	OID
zxr10MplsTunnelHopListIndex Primary index into this table identifying a particular explicit route object.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.4.1.1.1
zxr10MplsTunnelHopPathOptionIndex Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.4.1.1.2
zxr10MplsTunnelHopIndex Tertiary index into this table identifying a particular hop.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.4.1.1.3
zxr10MplsTunnelHopAddrType The Hop Address Type of this tunnel hop.	Enumeration Enumerated Values: 0 unknown 1 ipv4 2 ipv6 3 asnumber 4 unnum 5 lspid	.1.3.6.1.4.1.3902.3.315.1.4.1.1.4
zxr10MplsTunnelHopIpAddr The Tunnel Hop Address for this tunnel hop.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.4.1.1.5
zxr10MplsTunnelHopIpPrefixLen If zxr10MplsTunnelHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTunnelHopIpAddr. Otherwise this value is irrelevant and should …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.4.1.1.6
zxr10MplsTunnelHopAsNumber If zxr10MplsTunnelHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zerolength string and the manager should ignore this.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.4.1.1.7
zxr10MplsTunnelHopAddrUnnum If zxr10MplsTunnelHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with zxr10MplsTunnelHopIpAddres…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.4.1.1.8
zxr10MplsTunnelHopLspId If zxr10MplsTunnelHopAddrType is set to lspid(5), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled through this hop (using label stacking). This object is o…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.4.1.1.9
zxr10MplsTunnelHopType Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the zxr10MplsTunnelHopInclude object is set to 'false'.	Enumeration Enumerated Values: 1 strict 2 loose	.1.3.6.1.4.1.3902.3.315.1.4.1.1.10
zxr10MplsTunnelHopInclude If this value is set to true, then this indicates that this hop must be included in the tunnel's path. If this value is set to 'false', then this hoph must be avoided when calculating the path for this tunnel. The defau…	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.4.1.1.11
zxr10MplsTunnelHopPathOptionName The description of this series of hops as they relate to the specified path option. The value of this object SHOULD be the same for each hop in the series that comprises a path option.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.4.1.1.12
zxr10MplsTunnelHopEntryPathComp If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder of the path. If this value is set to explicit, the user sho…	Enumeration Enumerated Values: 1 dynamic 2 explicit	.1.3.6.1.4.1.3902.3.315.1.4.1.1.13
zxr10MplsTunnelHopRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelHopRowStatus and zxr1…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.315.1.4.1.1.14
zxr10MplsTunnelHopStorageType The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.3902.3.315.1.4.1.1.15

The zxr10MplsTunnelResourceTable allows a manager to
specify which resources are desired for an MPLS
tunnel. This table also allows several tunnels to
point to a single entry in this table, implying
that these tunnels should share resources.

zxr10MplsTunnelResourceEntry row .1.3.6.1.4.1.3902.3.315.1.5.1.1

An entry in this table represents a set of resources
for an MPLS tunnel. An entry can be created by a
network administrator or by an SNMP agent as
instructed by any MPLS signalling protocol.
An entry in this table refer…

Indexes

zxr10MplsTunnelResourceIndex

Column	Syntax	OID
zxr10MplsTunnelResourceIndex Uniquely identifies this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.5.1.1.1
zxr10MplsTunnelResourceMaxRate The maximum rate in bits/second. Note that setting zxr10MplsTunnelResourceMaxRate, zxr10MplsTunnelResourceMeanRate, and zxr10MplsTunnelResourceMaxBurstSize to 0 indicates besteffort treatment.	kilobits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.5.1.1.2
zxr10MplsTunnelResourceMeanRate This object is copied into an instance of mplsTrafficParamMeanRate in the mplsTrafficParamTable. The OID of this table entry is then copied into the corresponding mplsInSegmentTrafficParamPtr.	kilobits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.5.1.1.3
zxr10MplsTunnelResourceMaxBurstSize The maximum burst size in bytes.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.5.1.1.4
zxr10MplsTunnelResourceMeanBurstSize The mean burst size in bytes. The implementations which do not implement this variable must return noSuchObject exception for this object and must not allow a user to set this object.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.5.1.1.5
zxr10MplsTunnelResourceRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelResourceRowStatus and…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.315.1.5.1.1.6
zxr10MplsTunnelResourceStorageType The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects Srinivasan, et al. Standards Track [Page 38] RFC 3812 MPLS-TE-STD-MIB June 2004 in th…	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.3902.3.315.1.5.1.1.7

The zxr10MplsTunnelCHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined
in zxr10MplsTunnelTable, as computed by a constraintbased
routing protocol, based on the
zxr10MplsTunnelHopTable for the outgoing direction of
the tunnel. Thus at a transit LSR, this table (if
the table is supported) MAY contain the path
computed by the CSPF engine on (or on behalf of)
this LSR. Each row in this table is indexed by
zxr10MplsTunnelCHopListIndex. Each row also has a
secondary index zxr10MplsTunnelCHopIndex, corresponding
to the next hop that this row corresponds to. In
case we want to specify a particular interface on
the originating LSR of an outgoing tunnel by which
we want packets to exit the LSR, we specify this as
the first hop for this tunnel in
zxr10MplsTunnelCHopTable.
lease note that since the information necessary to
build entries within this table may not be
supported by some LSRs, implementation of this
table is optional. Furthermore, since the
information in this table describes the path
computed by the CSPF engine the entries in this
table are read-only.

zxr10MplsTunnelCHopEntry row .1.3.6.1.4.1.3902.3.315.1.6.1.1

An entry in this table represents a tunnel hop. An
entry in this table is created by a path
computation engine using CSPF techniques applied to
he information collected by routing protocols and
the hops specified in the…

Indexes

zxr10MplsTunnelCHopListIndex zxr10MplsTunnelCHopIndex

Column	Syntax	OID
zxr10MplsTunnelCHopListIndex Primary index into this table identifying a particular computed hop list.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.6.1.1.1
zxr10MplsTunnelCHopIndex Secondary index into this table identifying the particular hop.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.6.1.1.2
zxr10MplsTunnelCHopAddrType The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.	Enumeration Enumerated Values: 0 unknown 1 ipv4 2 ipv6 3 asnumber 4 unnum 5 lspid	.1.3.6.1.4.1.3902.3.315.1.6.1.1.3
zxr10MplsTunnelCHopIpAddr The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelCHopAddrType. If zxr10MplsTunnelCHopAddrType is set to unnum(4), then this value will c…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.6.1.1.4
zxr10MplsTunnelCHopIpPrefixLen If zxr10MplsTunnelCHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTunnelCHopIpAddr. Otherwise this value is irrelevant and shoul…	Unsigned32 Constraints: range: 0-2040	.1.3.6.1.4.1.3902.3.315.1.6.1.1.5
zxr10MplsTunnelCHopAsNumber If zxr10MplsTunnelCHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zero-length string and the manager should ignore this.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.6.1.1.6
zxr10MplsTunnelCHopAddrUnnum If zxr10MplsTunnelCHopAddrType is set to unnum(4), then this value will contain the unnumbered interface identifier of this hop. This object should be used in conjunction with zxr10MplsTunnelCHopIpAddr which would conta…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.6.1.1.7
zxr10MplsTunnelCHopLspId If zxr10MplsTunnelCHopAddrType is set to lspid(5), then his value will contain the LSP ID of this hop. his object is otherwise insignificant and should contain a value of 0 to indicate this fact.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.6.1.1.8
zxr10MplsTunnelCHopType Denotes whether this is tunnel hop is routed in a strict or loose fashion.	Enumeration Enumerated Values: 1 strict 2 loose	.1.3.6.1.4.1.3902.3.315.1.6.1.1.9

The zxr10MplsTunnelARHopTable is used to indicate the
hops for an MPLS tunnel defined in zxr10MplsTunnelTable,
as reported by the MPLS signalling protocol. Thus at
a transit LSR, this table (if the table is supported
and if the signaling protocol is recording actual
route information) contains the actual route of the
whole tunnel. If the signaling protocol is not
recording the actual route, this table MAY report
the information from the zxr10MplsTunnelHopTable or the
zxr10MplsTunnelCHopTable.
Each row in this table is indexed by
zxr10MplsTunnelARHopListIndex. Each row also has a
secondary index zxr10MplsTunnelARHopIndex, corresponding
to the next hop that this row corresponds to.
Please note that since the information necessary to
build entries within this table is not provided by
some MPLS signalling protocols, implementation of
this table is optional. Furthermore, since the
information in this table is actually provided by
the MPLS signalling protocol after the path has
been set-up, the entries in this table are provided
only for observation, and hence, all variables in
this table are accessible exclusively as readonly.
Note also that the contents of this table may change
while it is being read because of re-routing
activities. A network administrator may verify that
the actual route read is consistent by reference to
the zxr10MplsTunnelLastPathChange object.

zxr10MplsTunnelARHopEntry row .1.3.6.1.4.1.3902.3.315.1.7.1.1

An entry in this table represents a tunnel hop. An
entry is created by the agent for signaled ERLSP
set up by an MPLS signalling protocol.

Indexes

zxr10MplsTunnelARHopListIndex zxr10MplsTunnelARHopIndex

Column	Syntax	OID
zxr10MplsTunnelARHopListIndex Primary index into this table identifying a particular recorded hop list.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.7.1.1.1
zxr10MplsTunnelARHopIndex Secondary index into this table identifying the particular hop.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.7.1.1.2
zxr10MplsTunnelARHopAddrType The Hop Address Type of this tunnel hop. ote that lspid(5) is a valid option only for tunnels signaled via CRLDP.	Enumeration Enumerated Values: 0 unknown 1 ipv4 2 ipv6 3 asnumber 4 unnum 5 lspid	.1.3.6.1.4.1.3902.3.315.1.7.1.1.3
zxr10MplsTunnelARHopIpAddr The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelARHopAddrType. If zxr10MplsTunnelARHopAddrType is set to unnum(4), then this value cont…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.7.1.1.4
zxr10MplsTunnelARHopAddrUnnum If zxr10MplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with zxr10MplsTunnelARHopIpAd…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.7.1.1.5
zxr10MplsTunnelARHopLspId If zxr10MplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.3.315.1.7.1.1.6

A list of mpls traffic-eng interface entries.

zxr10MplsInterfaceEntry row .1.3.6.1.4.1.3902.3.315.1.8.1.1

An entry containing mpls traffic-eng interface.

Indexes

zxr10MplsInterfaceIndex

Column	Syntax	OID
zxr10MplsInterfaceIndexobsolete A unique value, greater than zero, for each interface whitch enables mpls traffic-eng.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.8.1.1.1
zxr10MplsInterfaceNameobsolete The name of this interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.8.1.1.2
zxr10MplsInterfaceIpAddrobsolete The ip address of this interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.8.1.1.3
zxr10MplsInterfaceMaskobsolete The subnet mask of this interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.3.315.1.8.1.1.4
zxr10MplsInterfaceBfdEnableobsolete If this interface enables bfd,this value is true,otherwise it is false.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.8.1.1.5
zxr10MplsInterfaceAuthEnableobsolete If this interface enables RSVP cryptographic authentication, this value is true,otherwise it is false.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.8.1.1.6
zxr10MplsInterfaceAuthChallengeEnableobsolete If this interface as a receiver enables rsvp authentication challenge,this value is true,otherwise it is false.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.8.1.1.7
zxr10MplsInterfaceAuthChallengeImpEnableobsolete If this interface as a sender enables rsvp authentication challenge,this value is true,otherwise it is false.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.8.1.1.8
zxr10MplsInterfaceAuthLifeTimeobsolete Specifies maximum lifetime of neighbor authentication state on this interface	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.8.1.1.9
zxr10MplsInterfaceAuthKeyobsolete Specifies shared secret for all neighbors on this interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.8.1.1.10
zxr10MplsInterfaceAuthTypeobsolete Specifies the type of authentication algorithm on this interface.	Enumeration Enumerated Values: 1 md5 2 sha1	.1.3.6.1.4.1.3902.3.315.1.8.1.1.11
zxr10MplsInterfaceAuthWinSizeobsolete Specifies received window size for authenticated messages on this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.315.1.8.1.1.12
zxr10MplsInterfaceTotalBandwidthobsolete Specifies reservable total bandwidth on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.8.1.1.13
zxr10MplsInterfaceAvailableBandwidthobsolete Specifies available bandwidth on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.8.1.1.14
zxr10MplsInterfaceMetricobsolete The config metric of mpls te interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.8.1.1.15
zxr10MplsInterfaceAutobakTunnelEnableobsolete If this object is true, then it prefers NODE_PROTECT to LINK_PROTECT by autobackup tunnel.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.8.1.1.16
zxr10MplsInterfaceAutobakTunnelNhoponlyobsolete If this object is true, then it only requires LINK_PROTECT by autobackup tunnel.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.8.1.1.17
zxr10MplsInterfaceSrlgsobsolete Specifies srlgs on this interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.8.1.1.18
zxr10MplsInterfaceAttributeFlagsobsolete Specifies attribute flags on this interface.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.3902.3.315.1.8.1.1.19

Explicit-path table is user configured,the user should specify the 
entire path for the tunnel to take. This path may contain strict or 
loose hops. Each hop along a specific path SHOULD have this object 
set to the same value

zxr10MplsIpExplicitEntry row .1.3.6.1.4.1.3902.3.315.1.9.1.1

Explicit-path table entry.

Indexes

zxr10MplsIpExplicitNameType zxr10MplsIpExplicitName

Column	Syntax	OID
zxr10MplsIpExplicitNameTypeobsolete First index of Explicit-path table.	Enumeration Enumerated Values: 2 explicitId 3 explicitName	.1.3.6.1.4.1.3902.3.315.1.9.1.1.1
zxr10MplsIpExplicitNameobsolete Secondary index of Explicit-path table.If the explicit name type is explicitId then this value is a number, or it is a string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.9.1.1.2
zxr10MplsIpExplicitTypeobsolete router type string list 1:strict 2:loose 3:exclude intf 4:exclude router-id eg. 1.4.3.2	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.9.1.1.3
zxr10MplsIpExplicitNextIpAddrobsolete Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,...	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.9.1.1.4
zxr10MplsIpExplicitIndexobsolete ip addr index,This field is a displayable string in the format of '1,2,...'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.9.1.1.5

Path option Table.

zxr10MplsPathOptEntry row .1.3.6.1.4.1.3902.3.315.1.10.1.1

Path option Table entry.

Indexes

zxr10MplsPathOptIndex zxr10MplsPathOptValue

Column	Syntax	OID
zxr10MplsPathOptIndexobsolete The index of path option whitch equals to tunnel index.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.3.315.1.10.1.1.1
zxr10MplsPathOptValueobsolete Secondary index whitch identifies the configure value of path option .	Unsigned32 Constraints: range: 0-16	.1.3.6.1.4.1.3902.3.315.1.10.1.1.2
zxr10MplsPathOptTypeobsolete If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If this value is explicitId or explicitName, the user specify the…	Enumeration Enumerated Values: 1 dynamic 2 explicitId 3 explicitName	.1.3.6.1.4.1.3902.3.315.1.10.1.1.3
zxr10MplsPathOptNameobsolete This value identifier the name of the path-option,when the type of the path-option is explicitName,the other times the value is null.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.10.1.1.4
zxr10MplsPathOptHotStandbyTypeobsolete Specifies the hotstandby protect type of the path-option.	Enumeration Enumerated Values: 0 none 1 dynamic 2 explicitId 3 explicitName 4 dynamic-prefer	.1.3.6.1.4.1.3902.3.315.1.10.1.1.5
zxr10MplsPathOptHotStandbyBackupPathNameobsolete The name of Backup path.If the type of hotstandby protection is dynamic,then this value is '1'; if the type is dynamic prefer,then this value is '2'; if the type is explicitId or explicitName,then this value is a numb…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.10.1.1.6

List of configured administrative groups.
Administrative groups are used to label links in
the Traffic Engineering topology in order to place
constraints (include and exclude) on LSP paths.

zxr10MplsAdminGroupListEntry row .1.3.6.1.4.1.3902.3.315.1.11.1.1

A mapping between a configured group number and its
human-readable name. The group number should be
between 0 and 31, inclusive.

Indexes

zxr10MplsAdminGroupNumber

Column	Syntax	OID
zxr10MplsAdminGroupNumberobsolete Index of the administrative group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.315.1.11.1.1.1
zxr10MplsAdminGroupNameobsolete Name of the administrative group.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.315.1.11.1.1.2