ZXR10-L2VPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
110

zxr10L2vpnSduTable

table
.1.3.6.1.4.1.3902.3.104.10.1 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10L2vpnSduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-L2VPN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-L2VPN-MIB::zxr10L2vpnSduTable' 
Sdu Table. This table contains
one entry per sdu table.
zxr10L2vpnSduEntry row .1.3.6.1.4.1.3902.3.104.10.1.1
The parameter of a Sdu entity containing
Indexes
Column Syntax OID
zxr10L2vpnSduServiceName
The name of the service instance.It consists
of 'Forwarder' modules connected by pseudowires
and Attach Circuit.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.1.1.1
zxr10L2vpnSduName
The name of Service Distribution Unit (SDU).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.1.1.2
zxr10L2vpnSduServiceType
The type of service instance.There are several
types of L2VPNs:(1)Virtual Private LAN Service(VPLS),
and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW),
and (4)Enhanced-Ethernet over Pseudowire
Enumeration
Enumerated Values:
0unknown
1vpls
2vpws
3mspw
6enhanced-vpws
 .1.3.6.1.4.1.3902.3.104.10.1.1.3
zxr10L2vpnSduRedandancyMgrName
The name of Redundency-manager.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.1.1.4
zxr10L2vpnSduRedundancyPrimaryPwPeer
The PW's remote endpoint address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.10.1.1.5
zxr10L2vpnSduRedundancyPrimaryPwVcid
A non-zero 32-bit connection ID that, together
with the PW type, identifies a particular PW.
Note that the PW ID and the PW type MUST be the
same at both endpoints.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.1.1.6
zxr10L2vpnSduRedundancyPrimaryPwVcType
A 15-bit quantity containing a value that represents
the type of PW. Assigned values are specified in 'IANA
Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
L2vpnPWType
Type Values:
0unknown
1fr-dlci-martini
2aal5-sdu
3atm-cell
4vlan
5ethernet
6hdlc
7ppp
8sdh-cesom
9atm-vccn
10atm-vpcn
11ip
12atm-vcc1
13atm-vpc1
14aal5-pdu
15fr-port
16sdh-ceop
17e1
18t1-ds1
19e3
20t3-ds3
21cesopsn
22tdm-aal1
23tdm-with-cas
24tdm-aal2
25fr-dlct
Description:
L2vpn PW Type. Assigned values are specified in 'IANA Allocations
for Pseudowire Edge to Edge Emulation (PWE3)
 .1.3.6.1.4.1.3902.3.104.10.1.1.7
zxr10L2vpnSduRedundancyBackupPwPeer
The PW's remote endpoint address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.10.1.1.8
zxr10L2vpnSduRedundancyBackupPwVcid
A non-zero 32-bit connection ID that, together with the PW type,
identifies a particular PW. Note that the PW ID and the PW type
MUST be the same at both endpoints.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.1.1.9
zxr10L2vpnSduRedundancyBackupPwVcType
A 15-bit quantity containing a value that represents the type of PW.
Assigned values are specified in 'IANA Allocations for Pseudowire Edge
to Edge Emulation (PWE3)'.
L2vpnPWType
Type Values:
0unknown
1fr-dlci-martini
2aal5-sdu
3atm-cell
4vlan
5ethernet
6hdlc
7ppp
8sdh-cesom
9atm-vccn
10atm-vpcn
11ip
12atm-vcc1
13atm-vpc1
14aal5-pdu
15fr-port
16sdh-ceop
17e1
18t1-ds1
19e3
20t3-ds3
21cesopsn
22tdm-aal1
23tdm-with-cas
24tdm-aal2
25fr-dlct
Description:
L2vpn PW Type. Assigned values are specified in 'IANA Allocations
for Pseudowire Edge to Edge Emulation (PWE3)
 .1.3.6.1.4.1.3902.3.104.10.1.1.10

zxr10L2vpnSacTable

table
.1.3.6.1.4.1.3902.3.104.10.2 · 1 row entry · 15 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10L2vpnSacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-L2VPN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-L2VPN-MIB::zxr10L2vpnSacTable' 
Sac Table. This table contains
one entry per Sac table.
zxr10L2vpnSacEntry row .1.3.6.1.4.1.3902.3.104.10.2.1
The parameter of a Sac entity containing
Indexes
Column Syntax OID
zxr10L2vpnSacServiceName
The name of the service instance.It consists of
'Forwarder' modules connected by pseudowires and Attach Circuit.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.2.1.1
zxr10L2vpnSacName
The name of Service Attachment Circuit(SAC).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.2.1.2
zxr10L2vpnSacServiceType
The type of service instance.There are several
types of L2VPNs:(1)Virtual Private LAN Service(VPLS),
and (2)Virtual Private Wire Service(VPWS),and
(3)Virtual Local Switching Service(VLSS),and
(4)Enhanced-Virtual Priv…
Enumeration
Enumerated Values:
0unknown
1vpls
2vpws
4vlss
6enhanced-vpws
 .1.3.6.1.4.1.3902.3.104.10.2.1.3
zxr10L2vpnSacServiceDefine
The parameter of service accesse.There are several
parameters of service accesse:(1)ethernt,(2)tdm,
(3)ppp,(4)hdlc,(5)fr.
Enumeration
Enumerated Values:
1ethernt
2tdm
3ppp
4hdlc
5fr
 .1.3.6.1.4.1.3902.3.104.10.2.1.4
zxr10L2vpnSacEthSwitchSplitHorizone
Split-horizon attribute which used in E-tree service
includes two types client/server
Enumeration
Enumerated Values:
0null
1on
2off
 .1.3.6.1.4.1.3902.3.104.10.2.1.5
zxr10L2vpnSacEthIngressAdjustType
The Type of VLAN tag ingress-adjustment.It consists
of (1)needless,(2)push,(3)pop-outermost,(4)rewrite
Enumeration
Enumerated Values:
0unknown
1needless
2push
3pop-outermost
4rewrite
 .1.3.6.1.4.1.3902.3.104.10.2.1.20
zxr10L2vpnSacEthPushedTag
A service-delimiting tag which pushed onto the incoming packets.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.104.10.2.1.21
zxr10L2vpnSacEthRewriteTargetTag
A VLAN tag which rewirted to replace the service-delimiting tags.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.3.104.10.2.1.22
zxr10L2vpnSacTdmJitterBuffer
The jitter-buffer size of TDM emulation.
Integer32
Constraints:
range: 2-64
 .1.3.6.1.4.1.3902.3.104.10.2.1.23
zxr10L2vpnSacTdmDistributePeriod
Tthe period of distributing TDM packets to remote end-point.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.3902.3.104.10.2.1.24
zxr10L2vpnSacTdmTimeslots
The time of TDM slots.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.2.1.25
zxr10L2vpnSacTdmStructureType
The structure type of TDM emulation.
Enumeration
Enumerated Values:
1aware
2agnostic
3aware-with-cas
 .1.3.6.1.4.1.3902.3.104.10.2.1.26
zxr10L2vpnSacEthSwitchGroupID
Split-horizon-Group attribute.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.3902.3.104.10.2.1.27
zxr10L2vpnSacInterworking
The name of SacInterworking.
Enumeration
Enumerated Values:
0none
1ip
2ethernet
 .1.3.6.1.4.1.3902.3.104.10.2.1.28
zxr10L2vpnSacInterworkingIpLocalCeMac
The LocalCeMac of SacInterworking.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.2.1.29

zxr10L2vpnRedundancyTable

table
.1.3.6.1.4.1.3902.3.104.10.3 · 1 row entry · 13 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10L2vpnRedundancyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-L2VPN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-L2VPN-MIB::zxr10L2vpnRedundancyTable' 
Redundancy Table. This table contains
one entry per Redundancy table.
zxr10L2vpnRedundancyEntry row .1.3.6.1.4.1.3902.3.104.10.3.1
The parameter of a Redundancy entity containing
Indexes
Column Syntax OID
zxr10L2vpnRedundancyName
The name of redundency-management.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.3.1.1
zxr10L2vpnRedundancySduName
The name of Service Distribution Unit (SDU)
belongs to the exact redundency-management instance.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.3.1.2
zxr10L2vpnRedundancyProtectMode
The protectmode of redundency-management instance.
There are two modes: (1)oneByOne, (2)onePlusOne
Enumeration
Enumerated Values:
1oneByOne
2onePlusOne
 .1.3.6.1.4.1.3902.3.104.10.3.1.3
zxr10L2vpnRedundancyPfsNegoMode
Configure the negotiation mode which include four
modes :(1) unsupported, (2)independent, (3)master, (4)slave.
Enumeration
Enumerated Values:
1unsupported
2independent
3master
4slave
 .1.3.6.1.4.1.3902.3.104.10.3.1.4
zxr10L2vpnRedundancyProtectPolicy
The protect-policy of transforming primary-pw
into backup-pw.There are two policies:(1)immediately, (2)delayed.
Enumeration
Enumerated Values:
1immediately
2delayed
 .1.3.6.1.4.1.3902.3.104.10.3.1.5
zxr10L2vpnRedundancyProtectDelayTime
The time of transforming primary-pw into backup-pw.
Integer32
Constraints:
range: 10-180
 .1.3.6.1.4.1.3902.3.104.10.3.1.6
zxr10L2vpnRedundancyRevertPolicy
The protectpolicy of transforming primary-pw
from backup-pw. There are two policies:(1)immediately, (2)delayed.
Enumeration
Enumerated Values:
1immediately
2delayed
3never
 .1.3.6.1.4.1.3902.3.104.10.3.1.7
zxr10L2vpnRedundancyRevertDelayTime
The time of transforming primary-pw from backup-pw.
Integer32
Constraints:
range: 10-180
 .1.3.6.1.4.1.3902.3.104.10.3.1.8
zxr10L2vpnRedundancyActivePWs
The statues of current active-pws.There are
three statues:(1)primary,(2)backup,(3)none.
Enumeration
Enumerated Values:
1primary
2backup
3none
 .1.3.6.1.4.1.3902.3.104.10.3.1.9
zxr10L2vpnRedundancyStandbyPWs
The statues of current standby-pws.There are
three statues:(1)primary,(2)backup,(3)none.
Enumeration
Enumerated Values:
1primary
2backup
3none
 .1.3.6.1.4.1.3902.3.104.10.3.1.10
zxr10L2vpnRedundancyInvalidPWs
The statues of current invalid-pws.There are
three statues:(1)primary,(2)backup,(3)none.
Enumeration
Enumerated Values:
1primary
2backup
3none
 .1.3.6.1.4.1.3902.3.104.10.3.1.11
zxr10L2vpnRedundancyProtectionCount
The total number of the pws switchover.
Transforming primary-pw into backup-pw or
transforming primary-pw from backup-pw means one.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.10.3.1.12
zxr10L2vpnRedundancyLastProtectionTime
The time of the last switchover, which
ransform primary-pw into backup-pw or
transform primary-pw from backup-pw.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.3.1.13

zxr10L2vpnPwTable

table
.1.3.6.1.4.1.3902.3.104.10.4 · 1 row entry · 40 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10L2vpnPwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-L2VPN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-L2VPN-MIB::zxr10L2vpnPwTable' 
Pw Table. This table contains
one entry per pw table.
zxr10L2vpnPwEntry row .1.3.6.1.4.1.3902.3.104.10.4.1
The parameter of a pw entity containing statistics
information about a particular PW.
Indexes
Column Syntax OID
zxr10L2vpnPwPeer
The PW's remote endpoint address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.10.4.1.1
zxr10L2vpnPwVcid
A non-zero 32-bit connection ID that, together
with the PW type, identifies a particular PW.
Note that the PW ID and the PW type MUST be the
same at both endpoints.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.4.1.2
zxr10L2vpnPwVcType
A 15-bit quantity containing a value that represents
the type of PW. Assigned values are specified in 'IANA
Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
L2vpnPWType
Type Values:
0unknown
1fr-dlci-martini
2aal5-sdu
3atm-cell
4vlan
5ethernet
6hdlc
7ppp
8sdh-cesom
9atm-vccn
10atm-vpcn
11ip
12atm-vcc1
13atm-vpc1
14aal5-pdu
15fr-port
16sdh-ceop
17e1
18t1-ds1
19e3
20t3-ds3
21cesopsn
22tdm-aal1
23tdm-with-cas
24tdm-aal2
25fr-dlct
Description:
L2vpn PW Type. Assigned values are specified in 'IANA Allocations
for Pseudowire Edge to Edge Emulation (PWE3)
 .1.3.6.1.4.1.3902.3.104.10.4.1.3
zxr10L2vpnPwSduName
The name of Service Distribution Unit (SDU).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.4.1.4
zxr10L2vpnPwServiceName
The name of the service instance.It consists
of 'Forwarder' modules connected by pseudowires
and Attach Circuit.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.4.1.5
zxr10L2vpnPwServiceType
The type of service instance.There are several
types of L2VPNs:(1)Virtual Private LAN Service(VPLS),
and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW),
and (4)Virtual Local Switching Service(VLSS),and
(5)E…
Enumeration
Enumerated Values:
0unknown
1vpls
2vpws
3mspw
4vlss
6enhanced-vpws
 .1.3.6.1.4.1.3902.3.104.10.4.1.6
zxr10L2vpnPwIsMspwSegment
The MSPW's ability weather the PW is MSPW's member.
Enumeration
Enumerated Values:
1first
2second
3none
 .1.3.6.1.4.1.3902.3.104.10.4.1.7
zxr10L2vpnPwLocalLabel
The PW's local label.When egress LER receives a packet
over a pseudowire,the PW's local label must be able to
determine that the packet was in fact received over a
pseudowire associate with a particular pseudowire,
…
Integer32
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.3.104.10.4.1.8
zxr10L2vpnPwRemoteLabel
The PW's remote label.When ingress LER sends a Layer 2 PDU
to remote egress LER,it creates an MPLS packets by adding
the PW's remote label to the packet,thus creating the first
entry of the label stack.The PW's remot…
Integer32
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.3.104.10.4.1.9
zxr10L2vpnPwSignalType
The type of signaling,including (1)static PW,and (2) the
Pwid FEC Element(FEC type 128),and the Generlized Pwid FEC
Element(FEC type 129).
Enumeration
Enumerated Values:
1static
2fec128
3fec129
 .1.3.6.1.4.1.3902.3.104.10.4.1.10
zxr10L2vpnPwLocalGroupId
The PW's local GroupId value.It is an arbitrary 32-bit value that
represents a group of PWs that is used to create groups in the PW
space.The group ID is intended to be used as a port index, or a
virtual tunnel index…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.104.10.4.1.11
zxr10L2vpnPwLocalCbit
The PW's local ability weather it is supporting CBit.
The bit (C) is used to flag the presence of a control
word as follows:C = 1 Control word present on this PW.
C = 0 No control word present on this PW.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.4.1.12
zxr10L2vpnPwLocalMTU
The PW's local MTU value.This is the Maximum Transmission Unit,
excluding encapsulation overhead, of the egresspacket interface
that will be transmitting the decapsulated PDUthat is received
from the MPLS-enabled netw…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.104.10.4.1.13
zxr10L2vpnPwLocalDescription
The PW's local descripton. This arbitrary, and OPTIONAL,
interface description string is used to send a human-readable
administrative string describing the interface to the remote.
This parameter is OPTIONAL and is …
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.4.1.14
zxr10L2vpnPwLocalStatusWord
The PW's local status value. Each bit in the status code field
can be used to indicate a single failure or an event. When a PW
is first set up, the PEs MUST attempt to negotiate the usage of
the PW status TLV.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.4.1.15
zxr10L2vpnPwLocalStatusSignalAbility
The PW's local status signal ability.
Osbits represents support pw operational status notification,
PFSbit represents support preferred forwarding status notification,
RSSbit represents support requested switchover stat…
Enumeration
Enumerated Values:
1osbits
2pfsbit
3rssbit
4none
 .1.3.6.1.4.1.3902.3.104.10.4.1.16
zxr10L2vpnPwRemoteGroupId
The PW's remote GroupId value.It is an arbitrary 32-bit value that
represents a group of PWs that is used to create groups in the PW
space.The group ID is intended to be used as a port index, or a
virtual tunnel inde…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.104.10.4.1.17
zxr10L2vpnPwRemoteCbit
The PW's remote ability weather it is supporting CBit.
The bit (C) is used to flag the presence of a control
word as follows:C = 1 Control word present on this PW.
C = 0 No control word present on this PW.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.4.1.18
zxr10L2vpnPwRemoteMTU
The PW's remote MTU value.This is the Maximum Transmission Unit,
excluding encapsulation overhead, of the egresspacket interface
that will be transmitting the decapsulated PDUthat is received
from the MPLS-enabled net…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.104.10.4.1.19
zxr10L2vpnPwRemoteDescription
The PW's remote descripton. This arbitrary, and OPTIONAL,
interface description string is used to send a human-readable
administrative string describing the interface to the remote.
This parameter is OPTIONAL and is…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.4.1.20
zxr10L2vpnPwRemoteStatusWord
The PW's remote status value. Each bit in the status code field
can be used to indicate a single failure or an event. When a PW
is first set up, the PEs MUST attempt to negotiate the usage of
the PW status TLV.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.4.1.21
zxr10L2vpnPwRemoteStatusSignalAbility
The PW's remote status signal ability.
Osbits represents support pw operational status notification,
PFSbit represents support preferred forwarding status notification,
RSSbit represents support requested switchover sta…
Enumeration
Enumerated Values:
1osbits
2pfsbit
3rssbit
4none
 .1.3.6.1.4.1.3902.3.104.10.4.1.22
zxr10L2vpnPwNegoedCbit
The PW's negotiated ability weather it is supporting CBit.
The bit (C) is used to flag the presence of a control
word as follows:C = 1 Control word present on this PW.
C = 0 No control word present on this PW.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.4.1.23
zxr10L2vpnPwNegoedMTU
The PW's negotiated MTU value.This is the Maximum Transmission Unit,
excluding encapsulation overhead, of the egresspacket interface
that will be transmitting the decapsulated PDUthat is received
from the MPLS-enabled…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.104.10.4.1.24
zxr10L2vpnPwNegoedStatusSignalAbility
The PW's negotiated status signal ability.
Osbits represents support pw operational status notification,
PFSbit represents support preferred forwarding status notification,
RSSbit represents support requested switchover…
Enumeration
Enumerated Values:
1osbits
2pfsbit
3rssbit
4none
 .1.3.6.1.4.1.3902.3.104.10.4.1.25
zxr10L2vpnPwSignalState
The PW's signal state on protocol level.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.3902.3.104.10.4.1.26
zxr10L2vpnPwVccvLocalParas
The PW's local VCCV value. This VCCV capability information indicates to the
receiving PE which combinations of Control Channel (CC) andConnectivity
Verification (CV) Types it is capable of receiving. Ifthe receiving P…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.4.1.27
zxr10L2vpnPwVccvRemoteParas
The PW's remote VCCV value. This VCCV capability information indicates to the
receiving PE which combinations of Control Channel (CC) andConnectivity
Verification (CV) Types it is capable of receiving. Ifthe receiving …
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.4.1.28
zxr10L2vpnPwVccvNegoedParas
The PW's negotiated VCCV value. This VCCV capability information indicates to the
receiving PE which combinations of Control Channel (CC) andConnectivity
Verification (CV) Types it is capable of receiving. Ifthe receiv…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.4.1.29
zxr10L2vpnPwPsnOutLabelDepth
The layer of MPLS label in the packet when
it crosses Core Network.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.3902.3.104.10.4.1.30
zxr10L2vpnPwPsnOutLabel1
A 20-bit quantity containing a value that represents
the botton of MPLS label stack.In L2VPN network,
this label means the VC label.
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.3902.3.104.10.4.1.31
zxr10L2vpnPwPsnOutLabel2
A 20-bit quantity containing a value that represents
the second layer of MPLS label stack from the bottom
of MPLS label.
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.3902.3.104.10.4.1.32
zxr10L2vpnPwPsnOutLabel3
A 20-bit quantity containing a value that represents
the third layer of MPLS label stack from the bottom
of MPLS label.
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.3902.3.104.10.4.1.33
zxr10L2vpnPwPsnTunnelType
The tunnel type of Core Network,including
(1)LDP label (2)TE label,and (3)BGP label.
Enumeration
Enumerated Values:
1ldp
2te
3bgp
 .1.3.6.1.4.1.3902.3.104.10.4.1.34
zxr10L2vpnPwPsnTunnelId
The tunnel ID number of Core Network.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.104.10.4.1.35
zxr10L2vpnPwSwitchMacWithdraw
The PW's local ability,whether the PW can send
Mac-withdraw message.The bit is used to flag
the presence as follows:Switch = 1 can send
mac-withdraw message on this PW. Switch = 0
can't sent mac-withdraw message o…
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.4.1.36
zxr10L2vpnPwServiceState
The service-state of PW ,including (1)down,
and (2) up,and (3)unknown.
Enumeration
Enumerated Values:
0unknown
1down
2up
 .1.3.6.1.4.1.3902.3.104.10.4.1.37
zxr10L2vpnPwWorkState
The work-state of PW ,including (1)down,
and (2) active,and (3)standby,and (4)unknown.
Enumeration
Enumerated Values:
0unknown
1active
2standby
3down
 .1.3.6.1.4.1.3902.3.104.10.4.1.38
zxr10L2vpnPwSwitchSplitHorizone
Split-horizon attribute which used in E-tree
service includes two types on/off
Enumeration
Enumerated Values:
0null
1on
2off
 .1.3.6.1.4.1.3902.3.104.10.4.1.39
zxr10L3vpnPwSwitchGroupID
Split-horizon-Group attribute .
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.3902.3.104.10.4.1.40

zxr10L2vpnServiceTable

table
.1.3.6.1.4.1.3902.3.104.10.5 · 1 row entry · 13 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10L2vpnServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-L2VPN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-L2VPN-MIB::zxr10L2vpnServiceTable' 
Service Table. This table contains
one entry per Service table.
zxr10L2vpnServiceEntry row .1.3.6.1.4.1.3902.3.104.10.5.1
The parameter of a Service entity containing
Indexes
Column Syntax OID
zxr10L2vpnServiceName
The name of the service instance.It consists
of 'Forwarder' modules connected by pseudowires
and Attach Circuit.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.5.1.1
zxr10L2vpnServiceType
The type of service instance.There are several
types of L2VPNs:(1)Virtual Private LAN Service(VPLS),
and (2)Virtual Private Wire Service(VPWS)
(3)Multi-segment Pseudowire(MSPW),and (4)Virtual
Local Switching Service(V…
Enumeration
Enumerated Values:
0unknown
1vpls
2vpws
3mspw
4vlss
6enhanced-vpws
 .1.3.6.1.4.1.3902.3.104.10.5.1.2
zxr10L2vpnServiceSac1Name
The first name of Service Attachment Circuit(SAC).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.5.1.3
zxr10L2vpnServiceSac2Name
The second name of Service Attachment Circuit(SAC).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.5.1.4
zxr10L2vpnServiceSdu1Name
The first name of Service Distribution Unit (SDU).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.5.1.5
zxr10L2vpnServiceSdu2Name
The second name of Service Distribution Unit (SDU).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.5.1.6
zxr10L2vpnServiceMTU
The VPLS's MTU value.This is the Maximum
Transmission Unit,excluding encapsulation overhead,
of the egresspacket interface that will be
transmitting the decapsulated PDUthat is received
from the MPLS-enabled network…
Integer32
Constraints:
range: 68-9216
 .1.3.6.1.4.1.3902.3.104.10.5.1.7
zxr10L2vpnServiceMspwFirstPwPeer
The PW's remote endpoint address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.10.5.1.8
zxr10L2vpnServiceMspwFirstPwVcid
A non-zero 32-bit connection ID that, together
with the PW type, identifies a particular PW.
Note that the PW ID and the PW type MUST be the
same at both endpoints.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.5.1.9
zxr10L2vpnServiceMspwFirstPWVcType
A 15-bit quantity containing a value that represents
the type of PW. Assigned values are specified in 'IANA
Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
L2vpnPWType
Type Values:
0unknown
1fr-dlci-martini
2aal5-sdu
3atm-cell
4vlan
5ethernet
6hdlc
7ppp
8sdh-cesom
9atm-vccn
10atm-vpcn
11ip
12atm-vcc1
13atm-vpc1
14aal5-pdu
15fr-port
16sdh-ceop
17e1
18t1-ds1
19e3
20t3-ds3
21cesopsn
22tdm-aal1
23tdm-with-cas
24tdm-aal2
25fr-dlct
Description:
L2vpn PW Type. Assigned values are specified in 'IANA Allocations
for Pseudowire Edge to Edge Emulation (PWE3)
 .1.3.6.1.4.1.3902.3.104.10.5.1.10
zxr10L2vpnServiceMspwSecondPwPeer
The PW's remote endpoint address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.10.5.1.11
zxr10L2vpnServiceMspwSecondPwVcid
A non-zero 32-bit connection ID that, together with the PW type,
identifies a particular PW. Note that the PW ID and the PW type
MUST be the same at both endpoints.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.104.10.5.1.12
zxr10L2vpnServiceMspwSecondPwVcType
A 15-bit quantity containing a value that represents the type of PW.
Assigned values are specified in 'IANA Allocations for Pseudowire Edge
to Edge Emulation (PWE3)'.
L2vpnPWType
Type Values:
0unknown
1fr-dlci-martini
2aal5-sdu
3atm-cell
4vlan
5ethernet
6hdlc
7ppp
8sdh-cesom
9atm-vccn
10atm-vpcn
11ip
12atm-vcc1
13atm-vpc1
14aal5-pdu
15fr-port
16sdh-ceop
17e1
18t1-ds1
19e3
20t3-ds3
21cesopsn
22tdm-aal1
23tdm-with-cas
24tdm-aal2
25fr-dlct
Description:
L2vpn PW Type. Assigned values are specified in 'IANA Allocations
for Pseudowire Edge to Edge Emulation (PWE3)
 .1.3.6.1.4.1.3902.3.104.10.5.1.13

zxr10L2vpnVplsTable

table
.1.3.6.1.4.1.3902.3.104.10.6 · 1 row entry · 19 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10L2vpnVplsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-L2VPN-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-L2VPN-MIB::zxr10L2vpnVplsTable' 
Vpls Table. This table contains
one entry per Vpls table.
zxr10L2vpnVplsEntry row .1.3.6.1.4.1.3902.3.104.10.6.1
The parameter of a Vpls entity containing
Indexes
Column Syntax OID
zxr10L2vpnVplsName
The name of VPLS instance.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.10.6.1.1
zxr10L2vpnVplsApplication
The type of service instance.There are several
types of L2VPNs:(1)Virtual Private LAN Service(VPLS),
and (2)Enhanced-Virtual Private LAN Service(Enhanced-VPLS),
and (3)Enhanced-Virtual Private Wire Service(Enhanced-VPW…
Enumeration
Enumerated Values:
0unknown
1vpls
5enhanced-vpls
6enhanced-vpws
 .1.3.6.1.4.1.3902.3.104.10.6.1.2
zxr10L2vpnVplsModelType
The model of the instance.It consists of
(1)rfc4447model2(0) and (2)rfc4447model3(1).
Enumeration
Enumerated Values:
0rfc4664model2
1rfc4664model3
 .1.3.6.1.4.1.3902.3.104.10.6.1.3
zxr10L2vpnVplsServiceMTU
The VPLS's MTU value.This is the Maximum
Transmission Unit,excluding encapsulation overhead,
of the egresspacket interface that will be
transmitting the decapsulated PDUthat is received
from the MPLS-enabled network…
Integer32
Constraints:
range: 68-9216
 .1.3.6.1.4.1.3902.3.104.10.6.1.4
zxr10L2vpnVplsSwitchMacLearning
L2vpn VPLS MAC learning switch.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.6.1.5
zxr10L2vpnVplsSwitchMacAging
L2vpn VPLS MAC aging time switch.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.6.1.6
zxr10L2vpnVplsSwitchStatistics
L2vpn VPLS MAC statistics time switch.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.6.1.7
zxr10L2vpnVplsSwitchMacWithdraw
L2vpn VPLS MAC withdraw time switch.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.3902.3.104.10.6.1.8
zxr10L2vpnVplsTimerMacAging
L2vpn VPLS MAC aging timer.
Integer32
Constraints:
range: 60-630
 .1.3.6.1.4.1.3902.3.104.10.6.1.9
zxr10L2vpnVplsAntimovePolicy
L2vpn VPLS anitmove policy.
Enumeration
Enumerated Values:
0unfixed
1local-fixed
2remote-fixed
 .1.3.6.1.4.1.3902.3.104.10.6.1.10
zxr10L2vpnVplsL2ptPolicyLACP
L2vpn VPLS L2pt policy for LACP.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.11
zxr10L2vpnVplsL2ptPolicyDot1X
L2vpn VPLS L2pt policy for Dot1x.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.12
zxr10L2vpnVplsL2ptPolicyGARP
L2vpn VPLS L2pt policy for GARP.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.13
zxr10L2vpnVplsL2ptPolicySTP
L2vpn VPLS L2pt policy for STP.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.14
zxr10L2vpnVplsL2ptPolicyLLDP
L2vpn VPLS L2pt policy for LLDP.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.15
zxr10L2vpnVplsL2ptPolicyDot3X
L2vpn VPLS L2pt policy for Dot3X.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.16
zxr10L2vpnVplsL2ptPolicyALL
L2vpn VPLS L2pt policy for ALL.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.17
zxr10L2vpnVplsL2ptPolicyAllBridgeMulticast
L2vpn VPLS L2pt policy for AllBridgeMulticast.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.18
zxr10L2vpnVplsL2ptPolicyZDPZTP
L2vpn VPLS L2pt policy for ZDPZTP.
L2vpnVplsPolicy
Type Values:
1tunnelling
2discarding
3terminating
4tunnellingMonitor
Description:
L2vpn Vpls Policy.
 .1.3.6.1.4.1.3902.3.104.10.6.1.19