ZXDS1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
31

zxDsx1ConfigTable

table
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1 · 1 row entry · 31 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxDsx1ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXDS1-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXDS1-MIB::zxDsx1ConfigTable' 
The DS1 Configuration table.
zxDsx1ConfigEntry row .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1
An entry in the DS1 Configuration table.
Indexes
Column Syntax OID
zxDsx1LineIndex
This object should be made equal to ifIndex. The
next paragraph describes its previous usage.
Making the object equal to ifIndex allows proper
use of ifStackTable and ds0/ds0bundle mibs.

Previously, this…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.1
zxDsx1IfIndexdeprecated
This value for this object is equal to the value
of ifIndex from the Interfaces table of MIB II
(RFC 1213).
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.2
zxDsx1TimeElapsed
The number of seconds that have elapsed since the
beginning of the near end current error-measurement
period. If, for some reason, such as an adjustment
in the system's time-of-day clock, the current interval
exceeds th…
Integer32
Constraints:
range: 0-899
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.3
zxDsx1ValidIntervals
The number of previous near end intervals for
which data was collected. The value will be 96
unless the interface was brought online within the
last 24 hours, in which case the value will be the
number of complete 15 m…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.4
zxDsx1LineType
This variable indicates the variety of DS1
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the…
Enumerationr/w
Enumerated Values:
1other
2dsx1ESF
3dsx1D4
4dsx1E1
5dsx1E1CRC
6dsx1E1MF
7dsx1E1CRCMF
8dsx1Unframed
9dsx1E1Unframed
10dsx1DS2M12
11dsx1E2
12dsx1E1Q50
13dsx1E1Q50CRC
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.5
zxDsx1LineCoding
This variable describes the variety of Zero Code
Suppression used on this interface, which in turn
affects a number of its characteristics.

dsx1JBZS refers the Jammed Bit Zero Suppression,
in which the AT…
Enumerationr/w
Enumerated Values:
1dsx1JBZS
2dsx1B8ZS
3dsx1HDB3
4dsx1ZBTSI
5dsx1AMI
6other
7dsx1B6ZS
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.6
zxDsx1SendCode
This variable indicates what type of code is
being sent across the DS1 interface by the device.
Setting this variable causes the interface to send
the code requested. The values mean:
dsx1SendNoCode
sending looped or n…
Enumerationr/w
Enumerated Values:
1dsx1SendNoCode
2dsx1SendLineCode
3dsx1SendPayloadCode
4dsx1SendResetCode
5dsx1SendQRS
6dsx1Send511Pattern
7dsx1Send3in24Pattern
8dsx1SendOtherTestPattern
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.7
zxDsx1CircuitIdentifier
This variable contains the transmission vendor's
circuit identifier, for the purpose of
facilitating troubleshooting.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.8
zxDsx1LoopbackConfig
This variable represents the desired loopback
configuration of the DS1 interface. Agents
supporting read/write access should return
inconsistentValue in response to a requested
loopback state that the interface does no…
Enumerationr/w
Enumerated Values:
1dsx1NoLoop
2dsx1PayloadLoop
3dsx1LineLoop
4dsx1OtherLoop
5dsx1InwardLoop
6dsx1DualLoop
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.9
zxDsx1LineStatus
This variable indicates the Line Status of the
interface. It contains loopback, failure,
received 'alarm' and transmitted 'alarms
information.

The zxDsx1LineStatus is a bit map represented as a
sum, ther…
Integer32
Constraints:
range: 1-131071
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.10
zxDsx1SignalMode
'none' indicates that no bits are reserved for
signaling on this channel.

'robbedBit' indicates that DS1 Robbed Bit Signaling
is in use.

'bitOriented' indicates that E1 Channel
Associated S…
Enumerationr/w
Enumerated Values:
1none
2robbedBit
3bitOriented
4messageOriented
5other
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.11
zxDsx1TransmitClockSource
The source of Transmit Clock.
'loopTiming' indicates that the recovered
receive clock is used as the transmit clock.

'localTiming' indicates that a local clock
source is used or when an external clock is
…
Enumerationr/w
Enumerated Values:
1loopTiming
2localTiming
3throughTiming
4adaptive
5enhancedAdaptive
6defferential
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.12
zxDsx1Fdl
This bitmap describes the use of the facilities
data link, and is the sum of the capabilities.
Set any bits that are appropriate:

other(1),
dsx1AnsiT1403(2),
dsx1Att54016(4),
dsx1FdlNone(8)
…
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.13
zxDsx1InvalidIntervals
The number of intervals in the range from 0 to
zxDsx1ValidIntervals for which no data is available.
This object will typically be zero except in cases
where the data for some intervals are not
available (e.g., in proxy …
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.14
zxDsx1LineLength
The length of the ds1 line in meters. This
objects provides information for line build out
circuitry. This object is only useful if the
interface has configurable line build out
circuitry.
metersInteger32r/w
Constraints:
range: 0-64000
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.15
zxDsx1LineStatusLastChange
The value of MIB II's sysUpTime object at the
time this DS1 entered its current line status
state. If the current state was entered prior to
the last re-initialization of the proxy-agent,
then this object contains a ze…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.16
zxDsx1LineStatusChangeTrapEnable
Indicates whether dsx1LineStatusChange traps
should be generated for this interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.17
zxDsx1LoopbackStatus
This variable represents the current state of the
loopback on the DS1 interface. It contains
information about loopbacks established by a
manager and remotely from the far end.

The zxDsx1LoopbackStatus i…
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.18
zxDsx1Ds1ChannelNumber
This variable represents the channel number of
the DS1/E1 on its parent DS2/E2 or DS3/E3. A
value of 0 indicated this DS1/E1 does not have a
parent DS3/E3.
Integer32
Constraints:
range: 0-28
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.19
zxDsx1Channelization
Indicates whether this ds1/e1 is channelized or
unchannelized. The value of enabledDs0 indicates
that this is a DS1 channelized into DS0s. The
value of enabledDs1 indicated that this is a DS2
channelized into DS1s. S…
Enumerationr/w
Enumerated Values:
1disabled
2enabledDs0
3enabledDs1
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.20
zxDsx1LineMode
This setting puts the T1 framer into either long
haul (CSU) mode or short haul (DSU) mode.
Enumerationr/w
Enumerated Values:
1csu
2dsu
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.21
zxDsx1LineBuildOut
Attenuation setting for T1 framer in long haul
(CSU) mode. The optional values are: -7.5dB,
-15dB, -22.5dB and 0dB.
Enumerationr/w
Enumerated Values:
1notApplicable
2neg75dB
3neg15dB
4neg225dB
5zerodB
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.22
zxDsx1AdminStatus
The desired state of the interface. The
testing(3) state indicates that no operational
packets can be passed.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.23
zxDsx1OperStatus
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.24
zxDsx1ClockStatus
The current clock state of the interface. the value can be:
FREERUN 0
HOLDOVER 1
ACQUIRING 2
ACUIRED 3
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.25
zxDsx1CfgInfoSend
The action to send the configuration on
Ds1/E1 interface to corresponding card.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.26
zxDsx1Retiming
Enable or disable Ds1/E1 interface retiming.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.27
zxDsx1Impedance
 Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.28
zxDsx1FrameType
 Enumerationr/w
Enumerated Values:
1unframe
2doubleframe
3multiframe
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.29
zxDsx1BER
 Integer32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.30
zxDsx1ClockStatusTrapEnable
Indicates whether zxDsx1ClockStatus traps
should be generated for this interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.31