ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB Table View

This table contains information of the port identification format
profile configuration. One entry in this table reflects a format
profile defined by a manager.

zxAnPortIdFormatPrfEntry row .1.3.6.1.4.1.3902.1082.70.67.2.2.1

An entry in zxAnPortIdFormatPrfTable, which is indexed by the
zxAnPortIdFormatPrfName.

To create a format profile, variable zxAnPortIdFormatPrfRowStatus
must be included in one SNMP set operation.

Indexes

zxAnPortIdFormatPrfName

Column	Syntax	OID
zxAnPortIdFormatPrfName A port identification format profile name.	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.2.1.1
zxAnPortIdFormatPrfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.67.2.2.1.50

This table is to provide circuit ID syntax configuration. One entry
in this table reflects a syntax item define by a manager, which is
a component of a port identification format profile.

zxAnPortIdCircuitIdSyntaxEntry row .1.3.6.1.4.1.3902.1082.70.67.2.3.1

An entry in zxAnPortIdCircuitIdSyntaxTable, which is index by the
zxAnPortIdFormatPrfName and zxAnPortIdCidComponentIndex.

If zxAnPortIdCidComponentType is standardVar(1) or extendedVar(2),
zxAnPortIdCidCom…

Indexes

zxAnPortIdFormatPrfName zxAnPortIdCidComponentIndex

Column	Syntax	OID
zxAnPortIdCidComponentIndex A key that identifies a component in the circuit ID syntax of a port identification format profile.	Integer32 Constraints: range: 1-30	.1.3.6.1.4.1.3902.1082.70.67.2.3.1.1
zxAnPortIdCidComponentType An attribute that identifies the type of this component. The following types are possible: standardVar - A TR-101 based variable(1: access node id, 2: chassis, 3: rack, 4: frame, 5: slot, 6: …	Enumerationr/w Enumerated Values: 1 standardVar 2 extendedVar 3 separator 4 userDefinedString	.1.3.6.1.4.1.3902.1082.70.67.2.3.1.2
zxAnPortIdCidComponentId A unique and content sensitive identifier for the specific definition of this component. The following identifiers are expected: - A row number in table 2 of TR-101 (R-126). - An index into a proprietary managed entity…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.70.67.2.3.1.3
zxAnPortIdCidComponentWidth The width of the port identification circuit ID syntax component. If the length of component is less than the width then fill zero in front of the component. Value 0 means unconfigured.	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.3902.1082.70.67.2.3.1.4
zxAnPortIdCidComponentString Information configured by the network operator.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-50 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.3.1.5
zxAnPortIdCidComponentProfile At present, this object is the syntax profile of the ONU information. It is supported when the component is onu-info (when zxAnPortIdCidComponentType is extendedVar(2) and zxAnPortIdCidComponentType is onu-info(9)). …	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.3.1.6
zxAnPortIdCidComponentRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.67.2.3.1.50

This table contains information of the port identification operator
profile configuration. One entry in this table reflects a operator
profile defined by a manager.

zxAnPortIdOperatorPrfEntry row .1.3.6.1.4.1.3902.1082.70.67.2.4.1

An entry in zxAnPortIdOperatorPrfTable, which is indexed by the
zxAnPortIdOperPrfName.

To create an operator profile, variable zxAnPortIdOperPrfRowStatus
must be included in one SNMP set operation.
…

Indexes

zxAnPortIdOperPrfName

Column	Syntax	OID
zxAnPortIdOperPrfName A port identification operator profile name.	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.1
zxAnPortIdOperPonFormatPrf Format profile of port identification applied while the access node type is pon.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.4
zxAnPortIdOperLanFormatPrf Format profile of port identification applied while the access node type is PTP.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.5
zxAnPortIdOperDhcpV4L2RAEnable The operator profile switch used to activate or deactivate interface DHCPv4 layer-2 relay agent. There are two states: - enabled: the DHCPv4 layer-2 relay agent is activated. - disabled: the DHCPv4 layer-…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.11
zxAnPortIdOperDhcpV4L2RATrust DHCPv4 layer-2 relay agent trust flag of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV4L2RAPolicy.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.12
zxAnPortIdOperDhcpV4L2RAPolicy DHCPv4 layer-2 relay agent trust policy of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV4L2RATrust. In addition…	Enumerationr/w Enumerated Values: 1 keep 2 replace 3 discard 4 add	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.13
zxAnPortIdOperDhcpV4AlcTag Access loop characteristics of DHCPv4 supported by this operator profile. The bit value 1 means the suboption represented by this bit is supported. It used only by DHCPv4.	ZxAnAccessLoopTagTyper/w Type Values: 0 suboption81 1 suboption82 2 suboption83 3 suboption84 4 suboption85 5 suboption86 6 suboption87 7 suboption88 8 suboption89 9 suboption8A 10 suboption8B 11 suboption8C 12 suboption8D 13 suboption8E 14 suboption90 Description: A set of access loop characteristics defined in TR-101 about DSL line, each bit refers to a suboption: Bit 00 : Suboption81, actual data rate upstream. Bit 01 : Suboption82, actual data rate downstream. Bit 02 : Subopt…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.14
zxAnPortIdOperDhcpV6L2RAEnable The operator profile switch used to activate or deactivate interface DHCPv6 layer-2 relay agent. There are two states: - enabled: the DHCPv6 layer-2 relay agent is activated. - disabled: the DHCPv6 layer-…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.21
zxAnPortIdOperDhcpV6L2RATrust DHCPv6 layer-2 relay agent trust flag of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV6L2RAPolicy.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.22
zxAnPortIdOperDhcpV6L2RAPolicy DHCPv6 layer-2 relay agent trust policy of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperDhcpV6L2RATrust. In addition…	Enumerationr/w Enumerated Values: 1 keep 2 replace 3 discard 4 add	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.23
zxAnPortIdOperDhcpV6AlcTag Access loop characteristics of DHCPv6 supported by this operator profile. The bit value 1 means the suboption represented by this bit is supported. It used by DHCPv6 at relay mode.	ZxAnAccessLoopTagTyper/w Type Values: 0 suboption81 1 suboption82 2 suboption83 3 suboption84 4 suboption85 5 suboption86 6 suboption87 7 suboption88 8 suboption89 9 suboption8A 10 suboption8B 11 suboption8C 12 suboption8D 13 suboption8E 14 suboption90 Description: A set of access loop characteristics defined in TR-101 about DSL line, each bit refers to a suboption: Bit 00 : Suboption81, actual data rate upstream. Bit 01 : Suboption82, actual data rate downstream. Bit 02 : Subopt…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.24
zxAnPortIdOperPppoeIAEnable The operator profile switch used to activate or deactivate interface PPPoE intermediate agent. There are two states: - enabled: the PPPoE intermediate agent is activated. - disabled: the PPPoE intermediat…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.31
zxAnPortIdOperPppoeIATrust PPPoE intermediate agent trust flag of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperPppoeIAPolicy.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.32
zxAnPortIdOperPppoeIAPolicy PPPoE intermediate agent trust policy of the operator profile. To set this variable, it must be in one SNMP set operation together with variable zxAnPortIdOperPppoeIATrust. In addition, a m…	Enumerationr/w Enumerated Values: 1 keep 2 replace 3 discard 4 add	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.33
zxAnPortIdOperPppoeAlcTag Access loop characteristics of PPPoE supported by this operator profile. The bit value 1 means the suboption represented by this bit is supported.It used by PPPoE and PPPoA.	ZxAnAccessLoopTagTyper/w Type Values: 0 suboption81 1 suboption82 2 suboption83 3 suboption84 4 suboption85 5 suboption86 6 suboption87 7 suboption88 8 suboption89 9 suboption8A 10 suboption8B 11 suboption8C 12 suboption8D 13 suboption8E 14 suboption90 Description: A set of access loop characteristics defined in TR-101 about DSL line, each bit refers to a suboption: Bit 00 : Suboption81, actual data rate upstream. Bit 01 : Suboption82, actual data rate downstream. Bit 02 : Subopt…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.34
zxAnPortIdOperDhcpV6L2RAWorkMode DHCPv6 layer 2 relay agent work mode of the profile. LDRA means the protocol RFC6221(Lightweight DHCPv6 Relay Agent). noLdra: The format of the relay messages do not meet RFC6221 standards. ldra: The form…	Enumerationr/w Enumerated Values: 1 noLdra 2 ldra 255 invalid	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.38
zxAnPortIdOperDhcpV4RidEnable The operator profile switch used to enable or disable remote ID while the protocol type is DHCPv4.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.40
zxAnPortIdOperDhcpV4RidFormatPrf Format profile of remote ID applied while the protocol type is DHCPv4.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.41
zxAnPortIdOperDhcpV6RidEnable The operator profile switch used to enable or disable remote ID while the protocol type is DHCPv6.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.42
zxAnPortIdOperDhcpV6RidFormatPrf Format profile of remote ID applied while the protocol type is DHCPv6.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.43
zxAnPortIdOperPppoeRidEnable The operator profile switch used to enable or disable remote ID while the protocol type is PPPoE.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.44
zxAnPortIdOperPppoeRidFormatPrf Format profile of remote ID applied while the protocol type is PPPoE.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.45
zxAnPortIdOperPrfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.67.2.4.1.100

This table is to provide the VLAN operator profile configuration. 
One entry in this table reflects an operator profile has been 
applied to one VLAN.

zxAnPortIdVlanOperPrfConfEntry row .1.3.6.1.4.1.3902.1082.70.67.2.5.1

An entry in zxAnPortIdVlanOperPrfConfTable, which is indexed by
the zxAnPortIdVid.

To create an entry, variables zxAnPortIdVlanOperPrf and
zxAnPortIdVlanOperPrfRowStatus must be included in one SNMP set
o…

Indexes

zxAnPortIdVid

Column	Syntax	OID
zxAnPortIdVid The VLAN to which an operator profile of port identification can be applied.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.70.67.2.5.1.1
zxAnPortIdVlanOperPrf A port identification operator profile name.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.5.1.2
zxAnPortIdVlanOperPrfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.67.2.5.1.50

This table is to provide the interface operator profile 
configuration. One entry in this table reflects an operator 
profile has been applied to an interface.

zxAnPortIdIfOperPrfConfEntry row .1.3.6.1.4.1.3902.1082.70.67.2.6.1

An entry in zxAnPortIdIfOperPrfConfTable, which is indexed by the
ifindex and zxAnSubIfIndex.

To create an entry, variables zxAnPortIdIfOperPrf and
zxAnPortIdIfOperPrfRowStatus must be included in one SNMP …

Indexes

IF-MIBifIndex ZTE-AN-IF-MIBzxAnSubIfIndex

Column	Syntax	OID
zxAnPortIdIfOperPrf A port identification operator profile name.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.70.67.2.6.1.1
zxAnPortIdIfOperPrfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.70.67.2.6.1.50