ZTE-AN-PON-PROTECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
28

zxAnPonProtectGroupTable

table
.1.3.6.1.4.1.3902.1082.500.5.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnPonProtectGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PON-PROTECTION-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-PROTECTION-MIB::zxAnPonProtectGroupTable' 
Protection group configuration.
zxAnPonProtectGroupEntry row .1.3.6.1.4.1.3902.1082.500.5.2.1.1
Pon protection group entry.

Entries in the zxAnPonProtectGroupTable are created and
deleted using the zxAnPonProtectGroupRowStatus object,
modify is prohibited.

The multi-variables binding rule…
Indexes
Column Syntax OID
zxAnPonProtectGroupId
Identifier of a PON protection group.
The available group id can be derived from
'zxAnPonProtectGroupNextIndex'.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.1
zxAnPonProtectGroupName
Name of a PON protection group.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.2
zxAnPonProtectGroupWorkPort
Same as ifIndex:
|-------------+----------|------------|---------|---------|
|InterfaceType| Rack No. | Shelf No. | Slot No.| Port No.|
| 1 (4bits) | (4bits) | (8bits) | (8bits) | (8bits) |
+-------------+-------…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.3
zxAnPonProtectGroupProtectPort
Same as ifIndex:
|-------------+----------|------------|---------|---------|
|InterfaceType| Rack No. | Shelf No. | Slot No.| Port No.|
| 1 (4bits) | (4bits) | (8bits) | (8bits) | (8bits) |
+-------------+-------…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.4
zxAnPonProtectType
PON protection type.
1 - TYPE A protection
2 - TYPE B protection
3 - TYPE C protection
4 - TYPE D protection
Enumerationr/w
Enumerated Values:
1typeA
2typeB
3typeC
4typeD
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.5
zxAnPonProtectSubTypedeprecated
Not supported.
PON protection structure type.
subType1 - 1+1 protection
subType2 - 1:1 proteciton
subType3 - protection supportting load balance.
Enumerationr/w
Enumerated Values:
1subType1
2subType2
3subType3
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.6
zxAnPonProtectSystemMode
The system mode of PON protection.
Enumerationr/w
Enumerated Values:
1sameNe
2spanNeAsWorkPort
3spanNeAsProtectionPort
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.7
zxAnPonProtectPeerAddrType
IP address type to be used by a peer IP host.
When 'zxAnPonProtectSystemMode' is 'spanNeAsWorkPort' or
'spanNeAsProtectionPort', then this attribute is valid.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.8
zxAnPonProtectPeerIpAddr
IP address to be used by a peer IP host.
When 'zxAnPonProtectSystemMode' is 'spanNeAsWorkPort' or
'spanNeAsProtectionPort' then this attribute is valid.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.9
zxAnPonProtectSpanNeEncryptKey
The encryption key, this attribute is used for span NE protection
communication and it is valid when zxAnPonProtectSystemMode is
'spanNeAsWorkPort' or 'spanNeAsProtectionPort'.
The empty string indicates no configura…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.10
zxAnPonProtectGroupRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.5.2.1.1.50

zxAnPonProtectGroupPropTable

table
.1.3.6.1.4.1.3902.1082.500.5.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnPonProtectGroupPropTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PON-PROTECTION-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-PROTECTION-MIB::zxAnPonProtectGroupPropTable' 
Protection group property.
zxAnPonProtectGroupPropEntry row .1.3.6.1.4.1.3902.1082.500.5.2.2.1
Property of a PON protection group.
Indexes
Column Syntax OID
zxAnPonProtectActiveChannel
The channel activated.
Enumeration
Enumerated Values:
1none
2workChannel
3protectChannel
 .1.3.6.1.4.1.3902.1082.500.5.2.2.1.1
zxAnPonProtectRevertMode
Protection revertive mode.
Enumerationr/w
Enumerated Values:
1revertive
2nonRevertive
 .1.3.6.1.4.1.3902.1082.500.5.2.2.1.2
zxAnPonProtectWtrInterval
Wait retrieve time.
SecondsInteger32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.3902.1082.500.5.2.2.1.3
zxAnPonProtectLastApsRequest
The last automatic protection switch request status.
Enumeration
Enumerated Values:
1noRequest
2doNotRevert
3reverseRequest
4exercise
5waitToRestore
6manualSwitchToProtection
7manualSwitchToWork
8workSignalDegrade
9protectionSignalDegrade
10workSignalFail
11protectionSignalFail
12forcedSwitchToProtection
13forcedSwitchToWork
14lockoutOfProtection
 .1.3.6.1.4.1.3902.1082.500.5.2.2.1.4
zxAnPonProtectWorkLinkStatus
The working link status of PON protection group.
na(1): the working link of PON protection group is in
not available status.
noAlarm(2): the working link of PON protection group is…
Enumeration
Enumerated Values:
1na
2noAlarm
3signalDegraded
4signalFailed
 .1.3.6.1.4.1.3902.1082.500.5.2.2.1.5
zxAnPonProtectPrtcLinkStatus
The protected link status of PON protection group.
na(1): the working link of PON protection group is in
not available status.
noAlarm(2): the working link of PON protection group …
Enumeration
Enumerated Values:
1na
2noAlarm
3signalDegraded
4signalFailed
 .1.3.6.1.4.1.3902.1082.500.5.2.2.1.6
zxAnPonProtectPonAlmDuration
The zxAnPonProtectPonLinkFaultAlm trap duration.
SecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.5.2.2.1.7

zxAnPonProtectActionTable

table
.1.3.6.1.4.1.3902.1082.500.5.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnPonProtectActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PON-PROTECTION-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-PROTECTION-MIB::zxAnPonProtectActionTable' 
Protection action.
zxAnPonProtectActionEntry row .1.3.6.1.4.1.3902.1082.500.5.2.3.1
Action of a PON protection group.
Indexes
Column Syntax OID
zxAnPonProtectSwitchCommand
Switch command.
Enumerationr/w
Enumerated Values:
1forceP2w
2forceW2p
3manualP2w
4manualW2p
5clearAll
6lockoutProtection
 .1.3.6.1.4.1.3902.1082.500.5.2.3.1.1
zxAnPonProtectSwitchOnuList
ONU list, in order to switch ONU protection.
First to find out the work PON port by
'zxAnPonProtectGroupId',then the ONUs all
belong to the work PON port.
The use of 32-octet specifies 256 ONU. Each octet
within this …
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.3902.1082.500.5.2.3.1.2

zxAnPonProtectGroupExtPropTable

table
.1.3.6.1.4.1.3902.1082.500.5.2.4 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnPonProtectGroupExtPropTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PON-PROTECTION-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-PROTECTION-MIB::zxAnPonProtectGroupExtPropTable' 
PON protection group extended property table,
only for type C and type D protection.
zxAnPonProtectGroupExtPropEntry row .1.3.6.1.4.1.3902.1082.500.5.2.4.1
PON protection group extend property entry,
only for type C and type D protection.

Entries in the zxAnPonProtectGroupExtPropTable are created and
deleted using the zxAnPonProtectExtPropRowStatus object.
mod…
Indexes
Column Syntax OID
zxAnPonProtectWorkChannelOnuId
Master ONU ID.
The ONU must has been configured at the work port before.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.1
zxAnPonProtectChannelOnuId
Slave ONU ID.
The ONU must has been configured at the protect port before.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.2
zxAnPonProtectOnuActiveChannel
Active channel.
Enumeration
Enumerated Values:
1none
2workChannel
3protectChannel
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.3
zxAnPonProtectOnuLastApsRequest
ONU last automatic protection switch request status.
Enumeration
Enumerated Values:
1noRequest
2doNotRevert
3reverseRequest
4exercise
5waitToRestore
6manualSwitchToProtection
7manualSwitchToWork
8workSignalDegrade
9protectionSignalDegrade
10workSignalFail
11protectionSignalFail
12forcedSwitchToProtection
13forcedSwitchToWork
14lockoutOfProtection
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.4
zxAnPonProtectOnuWorkLinkStatus
The working ONU link status.
na(1): the working link of PON protection group is in
not available status.
noAlarm(2): the working link of PON protection group is in
…
Enumeration
Enumerated Values:
1na
2noAlarm
3signalDegraded
4signalFailed
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.5
zxAnPonProtectOnuPrtcLinkStatus
The protection ONU link status.
na(1): the working link of PON protection group is in
not available status.
noAlarm(2): the working link of PON protection group is in
…
Enumeration
Enumerated Values:
1na
2noAlarm
3signalDegraded
4signalFailed
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.6
zxAnPonProtectOnuLinkAlmDuration
The trap zxAnPonProtectOnuLinkFaultAlm duration.
SecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.7
zxAnPonProtectExtPropRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.5.2.4.1.50