XSWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
273

scGenMonTable

table mandatory
.1.3.6.1.4.1.81.28.1.2.1 · 1 row entry · 16 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenMonTable' 
Table of attributes which define Monitoring information about 
a single XSwitch in SC based devices.
scGenMonEntry row .1.3.6.1.4.1.81.28.1.2.1.1
An entry in the table, containing data about a single XSwitch.
Indexes
Column Syntax OID
scGenMonSwitchIdmandatory
Index which identifies the XSwitch for which this entry contains information.
This value is never greater than chNumberOfXSwitches.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.2.1.1.1
scGenMonDropEventsmandatory
The total number of events in which the probe could not
count packets due to lack of resources. This number is not
necessarily the number of packets dropped; it is just the number
of times this condition has been det…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.2
scGenMonOctetsmandatory
The total number of good octets switched and error octets filtered by this XSwitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.3
scGenMonPktsmandatory
The total number of good packets switched and error
packets filtered by this XSwitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.4
scGenMonGoodBroadcastPktsmandatory
The total number of good packets switched by this
XSwitch that were directed to the broadcast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.5
scGenMonGoodMulticastPktsmandatory
The total number of good packets switched by this XSwitch that were
directed to the multicast address.
Note that this number does not include packets directed to the broadcast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.6
scGenMonGoodPktsmandatory
The total number of good packets switched by this XSwitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.7
scGenMonBadPktsmandatory
The total number of bad packets filtered by this XSwitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.8
scGenMonGoodOctetsmandatory
The total number of good octets switched by this XSwitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.9
scGenMonBadOctetsmandatory
The total number of bad octets filtered by this XSwitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.10
scGenMonSmonCapabilitymandatory
This item is used to define which smon's application are implemented in the agent.
When the console first performs smon application it should read this item in order
to know which of the smon's applications are availabl…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.81.28.1.2.1.1.11
scGenMonMIBCtrModemandatory
This object defines for switch ports to include/exclude local segment traffic
in their port counters
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.2.1.1.12
scGenMonSwitchVLANListmandatory
A bitmap defining the status of the virtual LANs in the
Virtual LAN Table. The first bit is for Virtual LAN 0, the
second for Virtual LAN 1, and so on. If the Virtual LAN
exists in the hub the value of the associated…
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.81.28.1.2.1.1.13
scGenMonMIBCtrListmandatory
A bitmap defining the status of the MIBCtrMode for
every group in the switch. The MSB (Most significant bit)
representing the status of group #1. If MIBCtrMode on a
group is enable(1) the bit is set to 1, otherwise 0.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.81.28.1.2.1.1.14
scGenMonTimeStampmandatory
This attribute contains the value of sysUpTime
at the time switch counters were calculated.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.15
scGenMonVlanTimeStampmandatory
This attribute contains the value of sysUpTime
at the time VLAN counters were calculated.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.1.1.16

scGenMonPriorityTable

table mandatory
.1.3.6.1.4.1.81.28.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenMonPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenMonPriorityTable' 
A list of priority count entries.
scGenMonPriorityEntry row .1.3.6.1.4.1.81.28.1.2.2.1
A list of statistics related to a specific priority level on
a single XSwitch in SC based devices.
Indexes
Column Syntax OID
scGenMonPrioritySwitchIdmandatory
Index which identifies the XSwitch for which this entry contains information.
This value is never greater than chNumberOfXSwitches.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.2.2.1.1
scGenMonPriorityIdmandatory
The priority for which this entry reports statistics.
1=regular.
2=high.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.81.28.1.2.2.1.2
scGenMonPriorityGoodPktsmandatory
The total number of good packets switched by this XSwitch
using this packet priority level.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.2.1.3
scGenMonPriorityGoodOctetsmandatory
The total number of good octets switched by this XSwitch
using this packet priority level.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.2.1.4

scGenMonVLANTable

table mandatory
.1.3.6.1.4.1.81.28.1.2.4 · 1 row entry · 7 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenMonVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenMonVLANTable' 
A list of virtual LAN statistics.
scGenMonVLANEntry row .1.3.6.1.4.1.81.28.1.2.4.1
A list of statistics related to a specific Virtual LAN.
Indexes
Column Syntax OID
scGenMonVLANSwitchIdmandatory
Index which identifies the XSwitch for which this entry contains information.
This value is never greater than chNumberOfXSwitches.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.2.4.1.1
scGenMonVLANIdmandatory
The Virtual LAN for which this entry contains information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.2.4.1.2
scGenMonVLANGoodPktsmandatory
The total number of good packets switched by the XSwitch
on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.4.1.3
scGenMonVLANGoodOctetsmandatory
The total number of good octets switched by the XSwitch
on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.4.1.4
scGenMonVLANStatsUcastPktsmandatory
The total number of good unicast packets switched by the XSwitch
on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.4.1.5
scGenMonVLANStatsMcastPktsmandatory
The total number of good multicast packets switched by the XSwitch
on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.4.1.6
scGenMonVLANStatsBcastPktsmandatory
The total number of good broadcast packets switched by the XSwitch
on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.2.4.1.7

scHostTimePortCorrTable

table mandatory
.1.3.6.1.4.1.81.28.1.2.6 · 1 row entry · 4 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scHostTimePortCorrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scHostTimePortCorrTable' 
An addition to the RMON MIB's hostTimeTable. This table contains
a list of MAC addresses that were monitored on the switch
and the ports to which they are connected.
The index of this table is the same as for the standard RMON
hostTimeTable. Indexes are scHostTimeCreationOrder and scHostTimeIndex.
The MAC address is stored in scHostTimeAddress.
The port to which the MAC address is connected is defined in 
scHostTimePortConnection.
scHostTimePortCorrEntry row .1.3.6.1.4.1.81.28.1.2.6.1
An entry in the MAC to port correlation table.
Indexes
Column Syntax OID
scHostTimeAddressmandatory
The physical address of this host.
OctetString .1.3.6.1.4.1.81.28.1.2.6.1.1
scHostTimeCreationOrdermandatory
An index that uniquely identifies an entry in
the hostTime table among those entries associated
with the same hostControlEntry. This index shall
be between 1 and N, where N is the value of
the associated hostControlTab…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.81.28.1.2.6.1.2
scHostTimeIndexmandatory
The set of collected RMON host statistics of
which this entry is a part. The set of hosts
identified by a particular value of this
index is associated with the hostControlEntry
as identified by the same value of hostC…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.81.28.1.2.6.1.3
scHostTimePortConnectionmandatory
The switch port to which this scHostTimeAddress is connected.
The coding of the port number for Visage switches is:
32*(H-1)+P, where H is the number of the hub in the stack
and P the port in the hub (1.. 32).
For hos…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.2.6.1.4

scGenGroupTable

table mandatory
.1.3.6.1.4.1.81.28.1.3.1 · 1 row entry · 38 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenGroupTable' 
Table of attributes which define general configuration 
information about a single SC based group.
scGenGroupEntry row .1.3.6.1.4.1.81.28.1.3.1.1
An entry in the table, containing data about a single Group.
Indexes
Column Syntax OID
scGenGroupIdmandatory
Unique Id of the group in the scGenGroupTable.
Equals the number of the slot by which the group is accessed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.1.1.1
scGenGroupUseSwitchesmandatory
This attribute reflects the status of the `Use Switches' switch which
defines the working mode of the module.
on - The module works according to the switches. No Set commands
may be performed on attributes related to t…
Enumeration
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.2
scGenGroupCopyPortSupportmandatory
Indication whether a module supports Copy-Port [on(1)],
or does not support Copy-Port [off(2)].
Enumeration
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.3
scGenGroupXswitchConnectionmandatory
This attribute identifies the Xswitch number (1..4) to which the module
is connected to.
In non-bridged configuration, there are potentialy up to 4 Xswitches -
1&2 for left&right Ethernet Xswitches and 3&4 for left&rig…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.3.1.1.4
scGenGroupStatusmandatory
This attributes defines the status of the Xswitch module.
The value 'loadsBudgetProblem' indicates that the module cannot be connected to the
Xswitch because it exceeds the maximum number of loads allowed in the Xswitc…
Enumeration
Enumerated Values:
1ok
2loadsBudgetProblem
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.5
scGenGroupSwitchTypemandatory
This attribute defines the Xswitch type of the module.
Enumeration
Enumerated Values:
1ethernet
2token-ring
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.6
scGenGroupNumberOfLoadsmandatory
This attribute identifies the number of loads which that Xswitch module represents.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.3.1.1.7
scGenGroupSetDefaultsmandatory
Set all module and ports parameters in the XSwitch module, to their default values.
This item will always return a value of off(2), since it acts like a toggle switch.
Set of layer2Only(3) value, will cause partial sett…
Enumerationr/w
Enumerated Values:
1on
2off
3layer2Only
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.8
scGenGroupSupportCopyPortListmandatory
A bitmap defining the status of each port of the hub\module whether it support copy
port or not,
0 - the port does not support copy port
1 - the port support the copy port
the list should start with the MSB indicat…
OctetString .1.3.6.1.4.1.81.28.1.3.1.1.9
scGenGroupSupportPortCountersListmandatory
A bitmap defining the status of each port of the hub\module whether it supports
the port's counters,
0 - the port does not support port's counters
1 - the port support the port's counters
the list should start wit…
OctetString .1.3.6.1.4.1.81.28.1.3.1.1.10
scGenGroupSupportSegCountersListmandatory
A bitmap defining the status of each port of the hub\module whether it supports
the segment counters on port,
0 - the port does not support segment's counters
1 - the port support the segment's counters
the list sh…
OctetString .1.3.6.1.4.1.81.28.1.3.1.1.11
scGenGroupUpLinkTypemandatory
The type of the Up Link port
Relevant only for the 25th port of Visage 2500:
Fiber (1) - 100BaseFX,
Copper (2) -100BaseTX.
Enumerationr/w
Enumerated Values:
1fiber
2copper
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.12
scGenGroupPlugInTypemandatory
Attribute describing the type of the plug-in module
Enumeration
Enumerated Values:
1cajunX120T8
2cajunX120F2
3cajunX120S1
4cajunX120S2
5cajunX120L1
6cajunX120L2
7cajunX120T16
8cajunX120F4
9cajunX120G2
10cajunX120GT2
11cajunX330T16
12cajunX330F4
13cajunX330F2
14cajunX330L2
15cajunX330S2
16cajunX330L1
17cajunX330S1
18cajunX330-OC12F1
19cajunX330-OC12F2
20cajunX330-OC3F1
21cajunX330-OC3F2
22cajunX330-OC12S1
23cajunX330-OC12S2
24cajunX330GT4
25cajunX330GT2
26cajunX330G2
27cajunX330W-4DS1
28cajunX330W-2DS1
31cajunX130F2
32cajunX130G2
33cajunX130GT2
34x330w-2ds1
35x330w-2usp
36x330w-2ds1-isdn
37x330w-2usp-isdn
38x330w-future1
39x330w-future2
40x330w-future3
41x330w-future4
42x330w-future5
43x330w-future6
44x330w-future7
45x330w-future8
46x330w-future9
254unknown
255none
 .1.3.6.1.4.1.81.28.1.3.1.1.13
scGenGroupPlugInDescrmandatory
Descriptor of the plug-in in ASCII (readable) format,
mainly for use with Generic management applications.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.3.1.1.14
scGenGroupPlugInCSmandatory
ASCII string for description and display of the plug-in
module configuration symbol. The format of the number is XXXX.YY
RFC1213-MIBDisplayString .1.3.6.1.4.1.81.28.1.3.1.1.15
scGenGroupDefaultVLANmandatory
Attribute describing the Default VLAN configuration on the switch ports of the module.
It is determined according to scGenSwitchDefaultVLAN parameter of the agent.
Enumeration
Enumerated Values:
1vlan0
2vlan1
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.16
scGenGroupCascadingTypemandatory
Attribute describing the type of the cascding module
Enumeration
Enumerated Values:
1cajunX330STK
2cajunX330MLSTK
3avayaX360STK
254unknown
255none
 .1.3.6.1.4.1.81.28.1.3.1.1.17
scGenGroupCascadingDescrmandatory
Descriptor of the cascading module in ASCII (readable) format,
mainly for use with Generic management applications.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.3.1.1.18
scGenGroupCascadingCSmandatory
ASCII string for description and display of the cascading module
configuration symbol. The format of the number is XXX.YYY
RFC1213-MIBDisplayString .1.3.6.1.4.1.81.28.1.3.1.1.19
scGenGroupSupportDstCopyPortListmandatory
A bitmap defining the status of each port of the hub\module
whether it supports the capability of being a destination copy-port .
1 - the port has the capability of being a destination copy-port
0 - the port doe…
OctetString .1.3.6.1.4.1.81.28.1.3.1.1.20
scGenGroupBUPSTypemandatory
Attribute describing the type of the BUPS module
Enumeration
Enumerated Values:
1ac
2dc
255none
 .1.3.6.1.4.1.81.28.1.3.1.1.21
scGenGroupBUPSCSmandatory
ASCII string for description and display of the BUPS
module configuration symbol. The format of the number is X.Y
RFC1213-MIBDisplayString .1.3.6.1.4.1.81.28.1.3.1.1.22
scGenGroupBUPSFansStatusmandatory
The operational status of the fans included in the BUPS module:
allFansOK(1) - all BUPS module's fans are operational.
oneFanFailed(2) - at least one of the BUPS module's fan is failed.
Enumeration
Enumerated Values:
1allFansOK
2oneFanFailed
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.23
scGenGroupFansStatusmandatory
The operational status of the fans included in the module:
allFansOK(1) - all module's fans are operational.
oneFanFailed(2) - at least one of the module's fan is failed.
Enumeration
Enumerated Values:
1allFansOK
2oneFanFailed
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.24
scGenGroupInternalBufferingmandatory
Control the internal buffering capacity.
Enumerationr/w
Enumerated Values:
1min
2max
3med
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.25
scGenGroupMcFilterBoxSupportmandatory
Tells whether the box hardware supports filtering or not.
Enumeration
Enumerated Values:
1filteringSupported
2filterNotSupport
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.26
scGenGroupMcFilterPersonalitySupportmandatory
Tells whether the personality hardware supports filtering or not.
The value PersonalityNotInstalld means that the a personality
Extention was not installed in the specific box
Enumeration
Enumerated Values:
1filteringSupported
2filterNotSupport
3personalityNotInstalled
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.27
scGenGroupMcFilterStackingSupportmandatory
Tells whether the stacking hardware supports filtering or not
The value StackingNotInstalld means that the a stacking daughter board
was not installed in the specific box
Enumeration
Enumerated Values:
1filteringSupported
2filterNotSupport
3stackingNotInstalled
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.28
scGenGroupLACPModemandatory
The value of this attribute determines whether LACPDU messages can be exchanged by the module's ports.
If enabled, the ports will exchange LACPDU messages according to their scGenPortLACPMode MIB.
If disabled, every por…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.81.28.1.3.1.1.29
scGenGroupSecurityModemandatory
Group intrusion security mode assigned to this module.
securityMode - all ports in this module are secure according to their scGenPortSecurityMode MIB's value.
nonSecurityMode - all ports in this module are not se…
Enumerationr/w
Enumerated Values:
1nonSecurityMode
2securityMode
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.30
scGenGroupBroadcastStormControlmandatory
Set the Broadcast Storm Control function on all switch ports.
On means that Broadcast, Multicast or Unknown packets are discarded on an ingress port,
when the rate of those packets, received on the port,
is above the sc…
Enumerationr/w
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.31
scGenGroupBroadcastThresholdmandatory
Set the Rate Threshold, in packets per second, above which Broadcast,
Multicast or Unknown packets are discarded on ingress port.
Integer32r/w
Constraints:
range: 10-144000
 .1.3.6.1.4.1.81.28.1.3.1.1.32
scGenGroupPriorityQueuesSchedulingmandatory
Set the Priority Queues Scheduling scheme for packets transmission from egress ports.
Strict - will serve higher priority queue before lower priority queue, as long as the higher queue has packets.
Weighted - will serve…
Enumerationr/w
Enumerated Values:
1strict
2weighted
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.33
scGenGroupBoundedDelaymandatory
Set the Bounded Delay function in the switch.
On will ensure that time-sensitive packets will be forwarded
through the switch in no more than a maximum delay.
Enumerationr/w
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.34
scGenGroupSLDAdminStatusmandatory
set the Self Loop Discovery application to enable/disable.
This works with the scGenPortSLDAdminStatus
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.3.1.1.35
scGenGroupDynamicVlansmandatory
Indicates the number of dynamic vlans detected in the module so far.
If this value is set to zero, all dynamic vlans detected up to this time will be deleted.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.1.1.36
scGenGroupSecurityMacCountmandatory
Indicates the number of secure MAC assigned to this module so far. The value should be
0 if the secure MAC table is empty for this module.
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.81.28.1.3.1.1.37
scGenGroupBUPSAllocatedPowermandatory
Indicates the total 48V BUPS power that is allocated to this module in Watts.
Integer32r/w
Constraints:
range: 100-900
 .1.3.6.1.4.1.81.28.1.3.1.1.38

scGenGroupSmonTable

table mandatory
.1.3.6.1.4.1.81.28.1.3.2 · 1 row entry · 13 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenGroupSmonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenGroupSmonTable' 
Table of smon capabilities in a single group.
scGenGroupSmonEntry row .1.3.6.1.4.1.81.28.1.3.2.1
An entry in the table, containing data about
a single Group.
Indexes
Column Syntax OID
scGenGroupSmonGroupIdmandatory
Unique Id of the group in the scGenGroupSmonTable.
Equals the number of the slot by which the group
is accessed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.2.1.1
scGenGroupSmonCapabilitymandatory
This item is used to define which smon's application are
implemented in the group.
When there is a value of 0 (zero) in the relevant bit
it means that the assosiated application is not supported.
When there is a value…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.81.28.1.3.2.1.2
scGenGroupSmonVlanListmandatory
A bitmap defining the status of the virtual LANs in the
Virtual LAN Table. The first bit is for Virtual LAN 0, the
second for Virtual LAN 1, and so on. If the Virtual LAN
exists in the hub the value of the associated…
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.81.28.1.3.2.1.3
scGenGroupSmonDropEventsmandatory
The total number of events ,in this group, in which the
probe could not count packets due to lack of resources.
This number is not necessarily the number of packets
dropped; it is just the number of times this conditio…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.4
scGenGroupSmonGoodBroadcastPktsmandatory
The total number of good broadcast packets in this group,
switched by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.5
scGenGroupSmonGoodMulticastPktsmandatory
The total number of good multicast packets, in this group,
switched by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.6
scGenGroupSmonGoodPktsmandatory
The total number of good packets, in this group, switched by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.7
scGenGroupSmonBadPktsmandatory
The total number of bad packets , in this group, filtered by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.8
scGenGroupSmonGoodOctetsmandatory
The total number of good octets, in this group, switched by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.9
scGenGroupSmonBadOctetsmandatory
The total number of bad octets, in this group, filtered by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.10
scGenGroupSmonPktsmandatory
The total number of packets, good and bad, in this group,
switched by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.11
scGenGroupSmonOctetsmandatory
The total number of octets, good and bad, in this group,
switched by the Xswitch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.2.1.12
scGenGroupSmonMIBCtrModemandatory
This object defines for group ports to include/exclude
local segment traffic in their port counters
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.3.2.1.13

scGenGroupVlanTable

table mandatory
.1.3.6.1.4.1.81.28.1.3.3 · 1 row entry · 14 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenGroupVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenGroupVlanTable' 
Table of attributes which define general VLAN 
counters of a single SC based group.
scGenGroupVlanEntry row .1.3.6.1.4.1.81.28.1.3.3.1
An entry in the table, containing VLAN counters in a single Group.
Indexes
Column Syntax OID
scGenGroupVlanGroupIdmandatory
Unique Id of the group in the scGenGroupVlanTable.
Equals the number of the slot by which the group is accessed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.3.1.1
scGenGroupVlanIdmandatory
The Virtual LAN for which this entry contains information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.3.1.2
scGenGroupVlanUcastPktsmandatory
The total number of good unicast packets ,in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.3
scGenGroupVlanMcastPktsmandatory
The total number of good multicast packets ,in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.4
scGenGroupVlanBcastPktsmandatory
The total number of good broadcast packets in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.5
scGenGroupVlanGoodPktsmandatory
The total number of good packets ,in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.6
scGenGroupVlanGoodOctetsmandatory
The total number of good octets ,in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.7
scGenGroupVlanUcastOctetsmandatory
The total number of good unicast octets ,in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.8
scGenGroupVlanMcastOctetsmandatory
The total number of good multicast octets ,in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.9
scGenGroupVlanBcastOctetsmandatory
The total number of good broadcast octets ,in this group,
switched by the Xswitch on this Virtual LAN.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.1.3.3.1.10
scGenGroupVlanCurrentEgressPortsmandatory
The set of ports in this module which are transmitting traffic for this
vlan as either tagged or untagged frames. Each module's port is
represented by a single bit in this 128-bits bitmap according to the
PortL…
OctetString .1.3.6.1.4.1.81.28.1.3.3.1.11
scGenGroupVlanCurrentUntaggedPortsmandatory
The set of ports which are transmitting traffic for this VLAN as
untagged frames. Each module's port is
represented by a single bit in this 128-bits bitmap according to the
PortList convention of RFC2674.
This …
OctetString .1.3.6.1.4.1.81.28.1.3.3.1.12
scGenGroupVlanStaticEgressPortsmandatory
The set of ports in this module which are permanently assigned to the
egress list for this VLAN by management. Each module's port is
represented by a single bit in this 128-bits bitmap according to the
PortList …
OctetStringr/w .1.3.6.1.4.1.81.28.1.3.3.1.13
scGenGroupVlanStaticUntaggedPortsmandatory
The set of ports which should transmit egress packets for this VLAN as
untagged. Each module's port is represented by a single bit in this
128-bits bitmap according to the PortList convention of RFC2674.
The defaul…
OctetStringr/w .1.3.6.1.4.1.81.28.1.3.3.1.14

scGenGroupRspTable

table mandatory
.1.3.6.1.4.1.81.28.1.3.4 · 1 row entry · 12 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenGroupRspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenGroupRspTable' 
.
scGenGroupRspEntry row .1.3.6.1.4.1.81.28.1.3.4.1
.
Indexes
Column Syntax OID
scGenGroupRspGroupIdmandatory
Unique Id of the group in the scGenGroupRspTable.
Equals the number of the slot by which the group is accessed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.1
scGenGroupRspHelloIntervalmandatory
The interval between transmissions of hello-messages, in 100mSec units.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.2
scGenGroupRspDevicePollingIntervalmandatory
The interval between transmissions of ARP queries for polling
connectivity to the device, in 100mSec units.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.3
scGenGroupRspDeviceNotRespondingTimeoutmandatory
Amount of time in which no ARP-replies are received from the device,
which cause the RSP to assume no connection to that device, in 100mSec units.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.4
scGenGroupRspSwitchNotRespondingTimeoutmandatory
Amount of time in which no hello-messages with acknowledge are received from the other switch,
which cause the RSP to assume no connection to that switch, in 100mSec units.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.5
scGenGroupRspMoveToForwardingIntervalmandatory
Amount of time the port waits upon deciding to move to forwarding mode,
until it moves to that mode, in 100mSec units.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.6
scGenGroupRspBroadcastArpShortIntervalmandatory
The interval in which the switch should send broadcast ARPs to the device
when not knowing the MAC-address of the device, in 100mSec units.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.7
scGenGroupRspBroadcastArpShortIntervalNumbermandatory
The number of broadcast ARPs the switch should send in short interval time,
when not knowing the MAC address of the device
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.8
scGenGroupRspBroadcastArpLongIntervalmandatory
The interval in which the switch should send broadcast ARPs to the device
when the device does not respond to unicast ARPs, in 100mSec units.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.4.1.9
scGenGroupRspPeriodicPingsBoxIpAddressmandatory
This MIB-item is the IP-address that the P330 box uses in order to periodically ping to devices
Default value for IP Address is 0.0.0.0
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.81.28.1.3.4.1.10
scGenGroupRspPeriodicPingsDestinationIpAddressmandatory
This MIB-item sets an IpAddress that the devices will be configured to periodically ping to.
The switch will be responsible to reply to ARP-queries concerning this IP-address,
and which were issued by devices directly…
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.81.28.1.3.4.1.11
scGenGroupRspModemandatory
Sets the mode of the module from the RSP-application prespective. Possible modes are:
RSP-module-mode-role-A - means that the ports of this module perform the
RSP scheme for a device connected through a repeater, in ro…
Enumerationr/w
Enumerated Values:
1rsp-module-mode-role-A
2rsp-modue-mode-role-B
255notSupported
 .1.3.6.1.4.1.81.28.1.3.4.1.12

scGenGroupDot1xTable

table mandatory
.1.3.6.1.4.1.81.28.1.3.5 · 1 row entry · 5 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenGroupDot1xTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenGroupDot1xTable' 
This table includes additional information for the extension of 802.1x multi-supplicant
mode.
scGenGroupDot1xEntry row .1.3.6.1.4.1.81.28.1.3.5.1
This entry includes information about 802.1x supplicants connected to
a device/module.
Indexes
Column Syntax OID
scGenGroupDot1xGroupIdmandatory
Unique Id of the group in the scGenGroupRspTable.
Equals the number of the slot by which the group is accessed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.5.1.1
scGenGroupDot1xSystemMaxNumSupplicantmandatory
The total number of supplicants allowed in the specific group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.5.1.2
scGenGroupDot1xCurrentNumSupplicantmandatory
The total number of supplicants connected in the specific group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.5.1.3
scGenGroupDot1xCurrentNumAuthenticatedSupplicantmandatory
The total number of authenticated supplicants connected in the specific group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.5.1.4
scGenGroupDot1xCurrentNumAuthenticatingSupplicantmandatory
The total number of authenticating supplicants connected in the specific group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.3.5.1.5

scGenPortTable

table mandatory
.1.3.6.1.4.1.81.28.1.4.1 · 1 row entry · 25 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenPortTable' 
Table of attributes which define general configuration 
information about a single SC based port.
scGenPortEntry row .1.3.6.1.4.1.81.28.1.4.1.1
An entry in the table, containing data about a single Port.
Indexes
Column Syntax OID
scGenPortGroupIdmandatory
Id of the group to which the port belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.4.1.1.1
scGenPortIdmandatory
Unique Id of the port in the scEthPortTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.4.1.1.2
scGenPortVLANmandatory
The Virtual LAN number of the Port.
The value 0 means Generic ( But can communicate with Global !).
The value '255' means Global.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.81.28.1.4.1.1.3
scGenPortPrioritymandatory
The priority level of the packets send by the Port.
Enumerationr/w
Enumerated Values:
1regular
2high
3userPriority1
4userPriority2
5userPriority3
6userPriority4
7userPriority5
8userPriority6
9userPriority7
10userPriority8
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.4
scGenPortSetDefaultsmandatory
Set all port parameters in the XSwitch module, to their default values.
This item is used for ports that are managed by Sub-agents.
This item will always return a value of off(2), since it acts
like a toggle switch.
Enumerationr/w
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.5
scGenPortBackbonemandatory
The type of the Xswitch port. 'on' indicates that the port was discovered
by VIDP as backbone port.
Enumeration
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.6
scGenPortCopyModemandatory
Enable /Disable the Copy Port mode in the Sub-Agent.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.7
scGenPortCopyDestinationmandatory
The destination of the copied information.
The destination can be another port or the Agent acting as an RMON probe.
The value of this item is: LSB Byte= sniffer channel number,
Next Byte= sniffer device number.
Wh…
Integer32r/w
Constraints:
range: 0-8092
 .1.3.6.1.4.1.81.28.1.4.1.1.8
scGenPortLinkAggregationNumbermandatory
The Link Aggregation Group (LAG) number, to which the Port belongs.
The value 0 means that this port is not part of a LAG. This is also the default.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.81.28.1.4.1.1.9
scGenPortSendBridgedPacketsmandatory
When set to on(1), the port will transmit to the line bridged frames
(for which their secondary VLAN was 0xFFE internally).
This is the case for ports connected to a station or to another switch
that has no bridging cap…
Enumerationr/w
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.10
scGenPortVLANEgressStaticConfigurationmandatory
A bitmap defining the VLANs, for which the port is member in their Egress Tables.
The first bit is for VLAN 0, the second bit for VLAN 1, and so on.
If the port is member in the Egress Table of a specified VLAN,
then th…
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.81.28.1.4.1.1.11
scGenPortStaticVLANBindingmandatory
This object defines whether Static VLAN Binding is enabled or disabled on the port.
If enabled, the port is member in the Egress List of the VLANs, as specified in
scGenPortVLANEgressStaticConfiguration, in addition to…
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.12
scGenPortSecIdmandatory
The identification number (per module) of the switching chip to which the port belongs.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.4.1.1.13
scGenPortMaxLagsOnSecmandatory
The theoretic maximum number of LAGs that can be defined over the switching chip to which the port
belongs. The value is fixed according to the switching chip type:
For the Timpani chip, the value is 1.
For the Guitar c…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.81.28.1.4.1.1.14
scGenPortGenericTrapmandatory
The value of this attribute determines whether or not the agent sends the snmp generic traps 2 and 3,
for link down/up events on this port.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.81.28.1.4.1.1.15
scGenPortLACPModemandatory
The value of this attribute determines whether the port exchanges LACPDU messages,
in agreement with the scGenGroupLACPMode MIB.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.81.28.1.4.1.1.16
scGenPortLastIntruderSourceAddrmandatory
Ethernet source address of the last intrusion attempt at this port.
The value of this item will be 000000 (a string of 6 zeros) if security mode is
disable or no security violation at this port.
OctetString
Constraints:
range: 0-1
 .1.3.6.1.4.1.81.28.1.4.1.1.17
scGenPortSecurityModemandatory
Security mode assigned to this port.
nonSecurityMode - do not perform intrusion control security mechanism on this port.
securityMode - perform intrusion control security mechanism and trap the console
in case of secur…
Enumerationr/w
Enumerated Values:
1nonSecurityMode
2securityMode
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.18
scGenPortSTAmandatory
Enable /Disable the Spanning Tree protocol for this port,
meaningless when disabled at the switch level via the scGenSwitchSTA MIB.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.19
scGenPortLagCapabilitymandatory
An octet string with the size of the maximum number of LAGs on the device.
Each bit represents a LAG which the port may be associated with (a member of).
OctetString .1.3.6.1.4.1.81.28.1.4.1.1.20
scGenPortCapabilitymandatory
Port capability bit mask, where each bit represent the capability of the port:
Bit #1 - 10Mbps speed support
Bit #2 - 100Mbps speed support
Bit #3 - 1000Mbps speed support
Bit #4 - 10000Mbps speed support
…
OctetString .1.3.6.1.4.1.81.28.1.4.1.1.21
scGenPortSLDAdminStatusmandatory
Sets the admin status of each port in the Self Loop Discovery application
A port which is disbaled does not send LDDU . A port which is enabled sends
LDDU and migth turn to blocking if a SLD is discovered.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.81.28.1.4.1.1.22
scGenPortSLDStatusmandatory
A port which is SLDEnabled can be in SelfLoop or NoSelfLoop mode .
if the port is SLD disabled it will return notSupported.
Enumeration
Enumerated Values:
1selfLoop
2noSelfLoop
255notSupported
 .1.3.6.1.4.1.81.28.1.4.1.1.23
scGenPortCopyClassModuleLevelmandatory
This variable indicates the class of each kind of port on any kind
of module for COPY PORT command at the module level. This MIB is defined
for module level copy ports.
This string is made of 16 bits. Each bit indicate…
OctetString .1.3.6.1.4.1.81.28.1.4.1.1.24
scGenPortCopyClassStackLevelmandatory
The first bit of this string indicates whether the requested port may
be copied to another port in the stack or not.
When a module is requested to copy a port to another module's port,
it answers whether the port is cap…
OctetString .1.3.6.1.4.1.81.28.1.4.1.1.25

scGenPortRspTable

table mandatory
.1.3.6.1.4.1.81.28.1.4.2 · 1 row entry · 3 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenPortRspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenPortRspTable' 
Table of attributes which define general configuration 
information about a single SC based port.
scGenPortRspEntry row .1.3.6.1.4.1.81.28.1.4.2.1
An entry in the table, containing data about a single Port.
Indexes
Column Syntax OID
scGenPortRspGroupIdmandatory
Id of the group to which the port belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.4.2.1.1
scGenPortRspIdmandatory
Unique Id of the port in the scGenPortRspTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.4.2.1.2
scGenPortRspModemandatory
Sets the mode of the port from the RSP-application perspective. Possible modes are:
Regular - means that this is a regular port that does not participate in the RSP scheme,
RSP-mode-role-A - means that this port perform…
Enumerationr/w
Enumerated Values:
1regular
2rsp-mode-role-A
3rsp-mode-role-B
4device-mode
255notSupported
 .1.3.6.1.4.1.81.28.1.4.2.1.3

scGenPortSecureMACTable

table mandatory
.1.3.6.1.4.1.81.28.1.4.3 · 1 row entry · 4 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenPortSecureMACTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenPortSecureMACTable' 
Table of Secure MAC list for a single SC based port.
scGenPortSecureMACEntry row .1.3.6.1.4.1.81.28.1.4.3.1
Indexes
Column Syntax OID
scGenPortSecureGroupIDmandatory
Unique Id of the group in the scGenGroupSecureMACTable.
Equals the number of the slot by which the group is accessed.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.81.28.1.4.3.1.1
scGenPortSecurePortIdmandatory
 Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.81.28.1.4.3.1.2
scGenPortSecureMACmandatory
 SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.81.28.1.4.3.1.3
scGenPortSecureMACStatusmandatory
This variable defines the status of the row.
The values of this variables are defined and handled,
according to the definitions in the IETF draft:
Row creation with SNMPv1, from 19 October 1993.
The createAndGo value …
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.81.28.1.4.3.1.4

scGenPortDot1xMACTable

table mandatory
.1.3.6.1.4.1.81.28.1.4.4 · 1 row entry · 6 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenPortDot1xMACTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenPortDot1xMACTable' 
Table of 802.1x multi/single supplicant MACs connected to a single SC based port.
scGenPortDot1xMACEntry row .1.3.6.1.4.1.81.28.1.4.4.1
Indexes
Column Syntax OID
scGenPortDot1xMACGroupIDmandatory
Unique Id of the group in the scGenGroupDot1xMACTable.
Equals the number of the slot by which the group is accessed.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.81.28.1.4.4.1.1
scGenPortDot1xMACPortIdmandatory
 Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.81.28.1.4.4.1.2
scGenPortDot1xMACmandatory
 SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.81.28.1.4.4.1.3
scGenPortDot1xMACAuthPaeStatemandatory
The current value of the 802.1x multi/single supplicant MAC/port state
machine. The MIB is identical to the dot1xAuthPaeState from IEEE8021-PAE-MIB.
Enumeration
Enumerated Values:
1initialize
2disconnected
3connecting
4authenticating
5authenticated
6aborting
7held
8forceAuth
9forceUnauth
 .1.3.6.1.4.1.81.28.1.4.4.1.4
scGenPortDot1xMACAuthBackendAuthStatemandatory
The current state of the Backend Authentication
state machine for the relevant 802.1x multi/single supplicant MAC/port.
The MIB is identical to the dot1xAuthBackendAuthState from IEEE8021-PAE-MIB.
Enumeration
Enumerated Values:
1request
2response
3success
4fail
5timeout
6idle
7initialize
 .1.3.6.1.4.1.81.28.1.4.4.1.5
scGenPortDot1xAuthAuthControlledPortStatusmandatory
The current value of the controlled 802.1x single-supplicant MAC
status parameter for the MAC.
The MIB is identical to the dot1xAuthAuthControlledPortStatus
from IEEE8021-PAE-MIB.
Note in multi supplicant this MIB retu…
IEEE8021-PAE-MIBPaeControlledPortStatus
Type Values:
1authorized
2unauthorized
 .1.3.6.1.4.1.81.28.1.4.4.1.6

scGenPortDot1xPortTable

table mandatory
.1.3.6.1.4.1.81.28.1.4.5 · 1 row entry · 6 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenPortDot1xPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenPortDot1xPortTable' 
Table of 802.1x multi-supplicant configuration and status of 
a single SC based port.
scGenPortDot1xPortEntry row .1.3.6.1.4.1.81.28.1.4.5.1
Indexes
Column Syntax OID
scGenPortDot1xPortGroupIDmandatory
Unique Id of the group in the scGenGroupDot1xPortTable.
Equals the number of the slot by which the group is accessed.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.81.28.1.4.5.1.1
scGenPortDot1xPortPortIdmandatory
 Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.81.28.1.4.5.1.2
scGenPortDot1xPortModemandatory
The authentication method used for the port.
Port-Based-Authentication is used for the standard single supplicant mode.
MAC-Based-Authentication is used for the multi supplicant mode to support
a few supplicants conn…
Enumerationr/w
Enumerated Values:
1port
2mac
 .1.3.6.1.4.1.81.28.1.4.5.1.3
scGenPortDot1xPortNumSupplicantsmandatory
Total number of supplicants connected to the port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.4.5.1.4
scGenPortDot1xPortNumAuthenticatedSupplicantsmandatory
Total number of authenticated supplicants connected to the port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.4.5.1.5
scGenPortDot1xPortNumAuthenticatingSupplicantsmandatory
Total number of authenticating supplicants connected to the port. I.e. clients
which are not authenticated yet.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.4.5.1.6

scGenSwitchTable

table mandatory
.1.3.6.1.4.1.81.28.1.5.1 · 1 row entry · 38 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenSwitchTable' 
Table of attributes which define information about 
a single XSwitch in SC based devices.
scGenSwitchEntry row .1.3.6.1.4.1.81.28.1.5.1.1
An entry in the table, containing data about a single XSwitch.
Indexes
Column Syntax OID
scGenSwitchIdmandatory
Index which identifies the XSwitch for which this entry contains information.
This value is never greater than chNumberOfXSwitches.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.5.1.1.1
scGenSwitchCopyModemandatory
Enable /Disable the Copy Port mode in the XSwitch.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.2
scGenSwitchCopySourcemandatory
The port in the switch that is being copied.
All received and transmit packets on the port( including local traffic ) are copied to
the defined destination, besides their normal destination.
The value of this item is: …
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.5.1.1.3
scGenSwitchCopyDestinationmandatory
The destination of the copied information.
The destination can be another port or the Agent acting as an RMON probe.
The value of this item is: 1024*S+P,
where S is the slot number in the hub and P is the port within …
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.5.1.1.4
scGenSwitchSetDefaultsmandatory
Set all port parameters in the XSwitch, to their default values.
This item will always return a value of off(2), since it acts like a toggle switch.
Enumerationr/w
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.5
scGenSwitchVIDPmandatory
Enable /Disable the VIDP protocol supported in the XSwitch.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.6
scGenSwitchTypemandatory
This attribute defines the type of the Xswitch.
Enumeration
Enumerated Values:
1ethernet
2token-ring
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.7
scGenSwitchMasterIdmandatory
This attribute defines which module in the Xswitch take the role of the Master.
It is equal to the slot number of the Xswitch Master.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.5.1.1.8
scGenSwitchResetmandatory
Setting this attribute to `on' will cause a reset to the Xswitch. Default value is 'off'.
Enumerationr/w
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.9
scGenSwitchNumberOfLoadsmandatory
This attribute identifies the total number of loads of that Xswitch.
There is a maximum budget of 30 loads on an single Xswitch.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.81.28.1.5.1.1.10
scGenSwitchAgVLANmandatory
The Virtual LAN number of the Agent's internal interface in the switch.
The value 0 means Generic (But can communicate with Global !).
The value '255' means Global.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.81.28.1.5.1.1.11
scGenSwitchVLANListmandatory
A bitmap defining the status of the virtual LANs in the
Virtual LAN Table. The first bit is for Virtual LAN 0, the
second for Virtual LAN 1, and so on. If the Virtual LAN
exists in the hub the value of the associated…
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.81.28.1.5.1.1.12
scGenSwitchSTAmandatory
Enable /Disable the Spanning Tree protocol support in the switch.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.13
scGenSwitchSecurityModemandatory
This item defines the Security mode per stack.
nonSecurityMode - all ports in the stack are not secure.
securityMode - all ports in the stack are secure according to their scGenPortSecurityMode MIB's value.
Enumerationr/w
Enumerated Values:
1nonSecurityMode
2securityMode
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.14
scGenSwitchFindQuerymandatory
An address to be searched for by the Agent.
The Agent will start look for the address when the value is
different than Null.
The string format is:
1st byte: address type - 0=MAC, 1=IP
Next bytes: the address. (for MAC…
OctetStringr/w .1.3.6.1.4.1.81.28.1.5.1.1.15
scGenSwitchFindResultmandatory
The search result. The result string format is:
1st byte: address type - 0=MAC, 1=IP.
Next bytes: the address. (for MAC: next 6 bytes,
for IP: next 4 bytes)
7-th byte (for MAC) or 5-th byte (for IP): number of ports wi…
OctetString .1.3.6.1.4.1.81.28.1.5.1.1.16
scGenSwitchSWRdChangemandatory
A 4-byte octet-string indicating a change performed by the SW Redundancy task.
The string will include:
Byte 1: Group1 (module number).
Byte 2 : Port1
Byte 3 : Group2
Byte 4 : port2
Where group2 port2 are the new en…
OctetStringr/w .1.3.6.1.4.1.81.28.1.5.1.1.17
scGenSwitchDefaultVLANmandatory
Attribute describing the Default VLAN configuration on the switch ports.
The user may change the value of this parameter through the setup terminal.
Vlan1 is the standard default VLAN for port configuration.
Enumeration
Enumerated Values:
1vlan0
2vlan1
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.18
scGenSwitchVLANBridgingmandatory
VLAN Bridging mode should be enabled in all Xswitches in the network, when the user
wants to support network-wide VLAN Bridging. VLAN Bridging should also be enabled
in one M-MLS, and PLS-Tagging mode should be set on t…
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.19
scGenSwitchOldVersionModulesmandatory
A list of modules, in ASCII format, that have older software versions than
necessary in the switch. Module numbers are separated by a comma and a space.
It is used to inform the user on version inconsistency.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.5.1.1.20
scGenSwitchVIDPNonSupportedModulesmandatory
A list of modules, in ASCII format, that do not support the VIDP function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems in VIDP function,
as not all modules in…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.5.1.1.21
scGenSwitchSTANonSupportedModulesmandatory
A list of modules, in ASCII format, that do not support the STA function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems in STA function,
as not all modules in th…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.5.1.1.22
scGenSwitchIDSNonSupportedModulesmandatory
A list of modules, in ASCII format, that do not support the IDS function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems in IDS function,
as not all modules in th…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.5.1.1.23
scGenSwitchMcFiltermandatory
Enable/disable the multicast filtering mechanism supported in the switch
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.24
scGenSwitchMcFilterHostAgingTimemandatory
The Value of the Host-Aging-Time parameter used by the multicast filtering
mechanism for aging learned multicast filtering information
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.5.1.1.25
scGenSwitchMcFilterRouterAgingTimemandatory
The Value of the Router-Aging-Time parameter used by the multicast filtering
mechanism for aging learned router-ports information
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.5.1.1.26
scGenSwitchMcFilterDelayTimemandatory
The Value of the Delay-Time parameter used by the multicast filtering
mechanism for waiting to all registration requests before applying a filter
on a specific group
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.5.1.1.27
scGenSwitchLACPModemandatory
The value of this attribute determines whether LACPDU messages can be exchanged by the switch's ports.
If enabled, the ports will exchange LACPDU messages according to their scGenPortLACPMode MIB.
If disabled, every por…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.81.28.1.5.1.1.28
scGenSwitchSecurityModePermitmandatory
This item defines the Security mode per switch.
This MIB is encoded in AVAYA specific security mechanism.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.5.1.1.29
scGenSwitchFastAgingOnRemoteTopChgmandatory
This item defines if the switch performs fast aging on the MAC address
forwarding database (or reset the cam contents) upon reception of
Topology Change BPDU from the STA root, indicating that a remote
topology change…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.30
scGenSwitchGigaModemandatory
The value of this attribute determines the setting for the two Giga links of a P130 stack.
Enumerationr/w
Enumerated Values:
1regular
2link-load-sharing
3primary-bottom
4primary-top
 .1.3.6.1.4.1.81.28.1.5.1.1.31
scGenSwitchCAMClearmandatory
When value sets to on(1), the switch clears its CAM table.
This item will always return a value of off(2), since it acts like a toggle switch.
Enumerationr/w
Enumerated Values:
1on
2off
255notSupported
 .1.3.6.1.4.1.81.28.1.5.1.1.32
scGenSwitchWelcomeMessagemandatory
The textual message of the welcome message that should be displayed upon
power on or telneting to the system.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.81.28.1.5.1.1.33
scGenSwitchPromptMessagemandatory
The textual message of the Prompt message that should be displayed.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.5.1.1.34
scGenSwitchMacAgingmandatory
Enable/Disable filtering database entries (MAC) aging
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.81.28.1.5.1.1.35
scGenSwitchSecurityActionmandatory
Specifies global security violation action.
Drop - drop intruder packets for 5 seconds.
dropAndNotify - Drop and notify.
shutdownAndNotify - Administratively Disable port (forever) and notify.
Enumerationr/w
Enumerated Values:
1drop
2dropAndNotify
3shutdownAndNotify
 .1.3.6.1.4.1.81.28.1.5.1.1.36
scGenSwitchDot1xPortMaxSuppNummandatory
Maximum number of supplicant allowed per port.
Possible values 1-8.
DEFAULT is 2.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.5.1.1.37
scGenSwitchDot1xLldpTxVlanNamemandatory
This MIB item includes additional information for the extension of 802.1x
multi-supplicant mode and LLDP application.
If this MIB is Enable and if there was authentication on one
of the ports on the device and:
1. If…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.81.28.1.5.1.1.38

scGenLinkAggregationTable

table mandatory
.1.3.6.1.4.1.81.28.1.6.1 · 1 row entry · 11 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenLinkAggregationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenLinkAggregationTable' 
Table of attributes which define Link Aggregation Group in a single switch.
scGenLinkAggregationEntry row .1.3.6.1.4.1.81.28.1.6.1.1
An entry in the table, containing LAG information in a single switch.
Indexes
Column Syntax OID
scGenLinkAggregationIdmandatory
The Link Aggregation number for which this entry contains information.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.81.28.1.6.1.1.1
scGenLinkAggregationNamemandatory
The Link Aggregation name, given by the user.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.81.28.1.6.1.1.2
scGenLinkAggregationBasePortGroupIdmandatory
The slot/unit number of the Base Port for this Link Aggregation.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.6.1.1.3
scGenLinkAggregationBasePortIdmandatory
The port number in the slot/unit of the Base Port for this Link Aggregation.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.6.1.1.4
scGenLinkAggregationNumberOfPortsmandatory
The current number of ports that belong to this Link Aggregation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.6.1.1.5
scGenLinkAggregationLogicalPortGroupIdmandatory
The slot number of the logical port, representing this Link Aggregation.
All parameters for the LAG are managed through that logical port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.6.1.1.6
scGenLinkAggregationLogicalPortIdmandatory
The logical port number in the slot, representing this Link Aggregation.
All parameters for the LAG are managed through that logical port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.6.1.1.7
scGenLinkAggregationFunctionalStatusmandatory
The functional status of the LAG:
ok(1) - fully functional LAG, transmitting and receiving packets on all its ports.
fail(2) - all ports in the LAG are not in ok status.
partialFail(3) - some of the ports in the LAG ar…
Enumeration
Enumerated Values:
1ok
2fail
3partialFail
255notSupported
 .1.3.6.1.4.1.81.28.1.6.1.1.8
scGenLinkAggregationAutoNegResultsmandatory
The auto-negotiation results for speed and duplex for the LAG ports:
ok(1) - all ports resolved the same speed and duplex mode after auto-negotiation process.
autoNegInconsistantResults(2) - not all ports resolved the s…
Enumeration
Enumerated Values:
1ok
2autoNegInconsistantResults
255notSupported
 .1.3.6.1.4.1.81.28.1.6.1.1.9
scGenLinkAggregationFaultMaskmandatory
Each bit of this item describes the situation of the LAG
regarding specific fault:
bit 1: on indicates 'LAG connection lost' when
scGenLinkAggregationFunctionalStatus=fail(2)
bit 2: on indicates 'LAG partial co…
OctetString .1.3.6.1.4.1.81.28.1.6.1.1.10
scGenLinkAggregationStatusmandatory
The status of this scGenLinkAggregation entry. According to RMON-2 standard (RFC 2021).
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.81.28.1.6.1.1.11

scGenPortIPAddressRspTable

table mandatory
.1.3.6.1.4.1.81.28.1.7.1 · 1 row entry · 4 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scGenPortIPAddressRspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scGenPortIPAddressRspTable' 
Table of attributes which define general configuration 
information about a single SC based port.
scGenPortIPAddressRspEntry row .1.3.6.1.4.1.81.28.1.7.1.1
An entry in the table, containing data about a single Port.
Indexes
Column Syntax OID
scGenPortIPAddressRspGroupIdmandatory
Id of the group to which the port belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.7.1.1.1
scGenPortIPAddressRspPortIdmandatory
Unique Id of the port in the scGenPortRspTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.7.1.1.2
scGenPortIPAddressRspIpAddressIndexmandatory
Unique Id of the port in the scGenPortRspTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.1.7.1.1.3
scGenPortIPAddressRspIpAddressmandatory
This MIB-item sets an IpAddress of a station that is connected to a port that performs RSP.
A value of 0.0.0.0 in this Mib Item means that it does not describe an existing IpAddress.
Default value is 0.0.0.0
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.81.28.1.7.1.1.4

scEthPortTable

table mandatory
.1.3.6.1.4.1.81.28.2.1.1 · 1 row entry · 47 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scEthPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scEthPortTable' 
Table of attributes which define configuration, 
performance and error information about ethernet
ports based on the switchChip.
scEthPortEntry row .1.3.6.1.4.1.81.28.2.1.1.1
An entry in the table, containing data about a single port.
Indexes
Column Syntax OID
scEthPortGroupIdmandatory
Id of the group to which the port belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.2.1.1.1.1
scEthPortIdmandatory
Unique Id of the port in the scEthPortTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.2.1.1.1.2
scEthPortOctetsRecmandatory
The total number of good octets received and bad octets
filtered by the port (excluding framing bits but including
FCS octets).
This item is the summation of scEthPortGoodOctetsRec
and scEthPortBadOctets.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.3
scEthPortPktsRecmandatory
The total number of good packets received and bad
packets filtered by the port.
This item is the summation of scEthPortGoodPktsRec
and scEthPortBadPkts.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.4
scEthPortGoodBroadcastPktsRecmandatory
The total number of good packets received that were
directed to the broadcast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.5
scEthPortGoodMulticastPktsRecmandatory
The total number of good packets received that were
directed to a multicast address.
Note that this number does not include packets directed to
the broadcast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.6
scEthPortCRCAlignErrorsmandatory
The total number of packets received that had a length
(excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but were not an
integral number of octets in length or had a bad Fra…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.7
scEthPortOversizePktsmandatory
The total number of packets received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets) and were otherwise well formed.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.8
scEthPortFragmentsmandatory
The total number of packets received that were less than 64 octets in
length (excluding framing bits but including FCS octets).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.9
scEthPortJabbermandatory
The total number of packets received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets), and were not an integral number of octets in
length or had a bad Frame Check Sequence (FCS).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.10
scEthPortCollisionsmandatory
The best estimate of the total number of collisions on this
Ethernet segment.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.11
scEthPortPkts64Octetsmandatory
The total number of packets (including error packets)
that were 64 octets in length (excluding framing
bits but including FCS octets).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.12
scEthPortPkts65to127Octetsmandatory
The total number of packets (including error packets)
that were between 65 and 127 octets in length
inclusive (excluding framing bits but including FCS
octets).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.13
scEthPortPkts128to255Octetsmandatory
The total number of packets (including error packets)
that were between 128 and 255 octets in length
inclusive (excluding framing bits but including FCS
octets).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.14
scEthPortPkts256to511Octetsmandatory
The total number of packets (including error packets)
that were between 256 and 511 octets in length
inclusive (excluding framing bits but including FCS
octets).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.15
scEthPortPkts512to1023Octetsmandatory
The total number of packets (including error packets)
that were between 512 and 1023 octets in length
inclusive (excluding framing bits but including FCS
octets).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.16
scEthPortPkts1024to1518Octetsmandatory
The total number of packets (including error packets)
that were between 1024 and 1518 octets in length
inclusive (excluding framing bits but including FCS
octets).
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.17
scEthPortGoodPktsRecmandatory
The total number of good packets received by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.18
scEthPortBadPktsmandatory
The total number of bad packets filtered by the port.
This item is the summation of:
scEthPortCRCAlignErrors, scEthPortOversizePkts,

scEthPortFragments and scEthPortJabber.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.19
scEthPortGoodOctetsRecmandatory
The total number of good octets of data received by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.20
scEthPortBadOctetsmandatory
The total number of bad octets of data filtered by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.21
scEthPortGoodBroadcastOctetsRecmandatory
The total number of good octets received that were
directed to the broadcast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.22
scEthPortGoodMulticastOctetsRecmandatory
The total number of good octets received that were
directed to a multicast address. Note that this number does
not include octets directed to the broadcast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.23
scEthPortGoodOctetsSentmandatory
The total number of good octets of data sent by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.24
scEthPortGoodPktsSentmandatory
The total number of good packets sent by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.25
scEthPortLateCollisionsmandatory
The best estimate of the total number of late collisions on
this Ethernet segment.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.26
scEthPortFunctionalStatusmandatory
The functional status of the port:
ok(1) - fully functional port, transmitting and receiving
packets.
rld(2) - receive link down condition on the port - Indicates
a cable or connector failure detected by the port H/W…
Enumeration
Enumerated Values:
1ok
2rld
3rxJabber
8partition
10remoteFault
11rspError
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.27
scEthPortModemandatory
The flow control mode of the port when operated in full duplex:
halfDuplex(1) - Half duplex connection, standard mode for segment
fullDuplexNoPause(2) - Full duplex connection without exchanging flow control packets
ful…
Enumerationr/w
Enumerated Values:
1halfDuplex
2fullDuplexNoPause
3fullDuplexProprietaryFC
4fullDuplexISL
5fullDuplexFlowControlISL
6fullDuplexAsymTxPause
7fullDuplexSymPause
8fullDuplexAsymRxPause
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.28
scEthPortSpeedmandatory
This parameter defines the port speed:
ethernet(1) and fastEthernet(2).
Enumerationr/w
Enumerated Values:
1ethernet
2fastEthernet
3gigabitEthernet
4a155Mbps
5a622Mbps
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.29
scEthPortAutoNegotiationmandatory
This object define if the Auto Sense /Auto Negotiation
process is enable(1) or disable (2)
for modules that don't support the Auto Snese mode
please define the notSupported option..
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.30
scEthPortAutoNegotiationStatusmandatory
This object define the status of the Auto Negotiation process:
pass: The Auto negotiation process was completed and succeeded .
fail: The Auto Negotiation process failed .
disable: The Auto Negotiation process is not…
Enumeration
Enumerated Values:
1pass
2fail
3disable
4inProgress
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.31
scEthPortTotalOctetsmandatory
The total number of octets received and transmitted on
the port (including all good and bad).
This item is the summation of scEthPortOctetsRec
and scEthPortGoodOctetsSent.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.32
scEthPortTotalPktsmandatory
The total number of packets received and transmitted on
the port (including all good and bad).
This item is the summation of scEthPortPktsRec
and scEthPortGoodPktsSent.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.33
scEthPortDropEventsmandatory
The total number of events in which the probe could not
count packets due to lack of resources. This number is not
necessarily the number of packets dropped; it is just the
number of times this condition has been de…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.34
scEthPortGigaPauseStatusmandatory
Indicates the status of the Flow Control as determined in the Auto Negotiation process on the
Gigabit ports:
noPause(1) indicates that there is no Flow Control.
symmetricPause(2) indicates that both sides are working i…
Enumeration
Enumerated Values:
1noPause
2symmetricPause
3asymmetricPauseRx
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.35
scEthPortLower32OctetsRecmandatory
Lower 32 bit conter of the total number of octets of data received by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.36
scEthPortUpper32OctetsRecmandatory
Upper 32 bit conter of the total number of octets of data received by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.37
scEthPortLower32OctetsSentmandatory
Lower 32 bit conter of the total number of octets of data sent by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.38
scEthPortUpper32OctetsSentmandatory
Upper 32 bit conter of the total number of octets of data sent by the port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.39
scEthPortGoodUnicastPktsRecmandatory
The total number of good packets received that were directed to a unicast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.40
scEthPortDiscardPktsRecmandatory
The total number of packets which were chosen to be discarded even
though no errors had been detected to prevent their being deliverable
to a higher-layer protocol. One possible reason for discarding such
a packet could…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.41
scEthPortUnicastPktsSentmandatory
The total number of good packets sent by the port
that were directed to a unicast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.42
scEthPortDiscardPktsSentmandatory
The total number of packets which were chosen to be discarded even though no errors
had been detected to prevent their being transmitted.
One possible reason for discarding such a packet could be to free up buffer space.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.43
scEthPortPauseCapabilitiesmandatory
The Pause capabilities of a Giga port that should be advertised to the link
partner when performing auto-negotiation:
noFlowControl (1) - no flow control support in any direction
asymTxFlowControlOnly (2) - STD 802.3x f…
Enumerationr/w
Enumerated Values:
1noFlowControl
2asymTxFlowControlOnly
3symFlowControlOnly
4symAndAsymRxFlowControl
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.44
scEthPortMulticastPktsSentmandatory
The total number of good packets sent by the port that were directed to a multicast address.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.45
scEthPortUndersizePktsRecmandatory
The total number of packets received that were less than 64 octets long (excluding framing
bits, but including FCS octets) and were otherwise well formed.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.81.28.2.1.1.1.46
scEthPortFlowControlmandatory
The flow control mode of the port
Enumerationr/w
Enumerated Values:
1noFlowControl
2asymTxFlowControl
3symFlowControl
4asymRxFlowControl
5proprietaryFlowControl
255notSupported
 .1.3.6.1.4.1.81.28.2.1.1.1.47

scEthGroupTable

table mandatory
.1.3.6.1.4.1.81.28.2.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scEthGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scEthGroupTable' 
Table of attributes which define ethernet configuration 
information about a single SC based group.
scEthGroupEntry row .1.3.6.1.4.1.81.28.2.2.1.1
An entry in the table, containing data about a single Group.
Indexes
Column Syntax OID
scEthGroupIdmandatory
Unique Id of the group in the scEthGroupTable.
Equals the number of the slot by which the group is accessed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.2.2.1.1.1
scEthGroupAutoPartitionEnablemandatory
Enables/Disables the Auto-Partition mechanism in all ports of this module.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.2.2.1.1.2
scEthGroupFefiEnablemandatory
This item enables\disables the FEFI mechanism of all Fast-Ethernet
PHY's in the module. It enables\disables both the transmission and
the recognition of FEFI signals.
Enumerationr/w
Enumerated Values:
1enable
2disable
255notSupported
 .1.3.6.1.4.1.81.28.2.2.1.1.3
scPowerEthGroupInlineSWversionmandatory
Indicates the Powerinline image version of the groupID module.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.81.28.2.2.1.1.4

scPowerEthGroupTable

table mandatory
.1.3.6.1.4.1.81.28.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scPowerEthGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scPowerEthGroupTable' 
Table of attributes which define general configuration 
information about a single SC based port.
scPowerEthGroupEntry row .1.3.6.1.4.1.81.28.3.1.1
An entry in the table, containing data about a single Port.
Indexes
Column Syntax OID
scPowerEthGroupIdmandatory
Id of the group to which the port belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.3.1.1.1
scPowerEthGroupPsePSPowerFaultErrMsgmandatory
Free text informing a main power failure.
RFC1213-MIBDisplayString .1.3.6.1.4.1.81.28.3.1.1.2
scPowerEthGroupPseDetectionProcessmandatory
This object specifies the detection process used by PD.
Resistive investigates the line for resistive type load,
Capacitive investigates the line for a capacitive load,
and both detects for a resistive type first, the…
Enumerationr/w
Enumerated Values:
1resistive
2capacitive
3both
 .1.3.6.1.4.1.81.28.3.1.1.3

scPowerEthPortTable

table mandatory
.1.3.6.1.4.1.81.28.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scPowerEthPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scPowerEthPortTable' 
Table of additional information about PoE ports.
scPowerEthPortEntry row .1.3.6.1.4.1.81.28.3.2.1
An entry in the table, containing data about a single Port.
Indexes
Column Syntax OID
scPowerEthPortGroupIdmandatory
Id of the group to which the port belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.3.2.1.1
scPowerEthPortPortIdmandatory
Id of the port in the relevant group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.3.2.1.2
scPowerEthPortConsumptionPowermandatory
Indicates the amount of power consumption in mWatts for the specific port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.81.28.3.2.1.3

scPriorityQueuingTable

table mandatory
.1.3.6.1.4.1.81.28.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk scPriorityQueuingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XSWITCH-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XSWITCH-MIB::scPriorityQueuingTable' 
The Priority Queuing table controls the queuing mode
of the switch ports. This table is arranged by module
so that the queuing parameters are set on per module id.
scPriorityQueuingEntry row .1.3.6.1.4.1.81.28.4.1.1
An entry in the table, containing data about a single module.
Indexes
Column Syntax OID
scPriorityQueuingModuleIDmandatory
Module number - position of a module in the stack
or a slot within a modular chassis.
Integer32
Constraints:
range: 1-21
 .1.3.6.1.4.1.81.28.4.1.1.1
scPriorityQueuingNumberOfQueuesmandatory
Number of Priority queues supported by corrsponding module.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.81.28.4.1.1.2
scPriorityQueuingExpediteWRRFlgmandatory
When yes - supports an expedite queuing mode.
In expedite mode the highest priority queue is serviced
until it is empty and only then WRR queues are served.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.81.28.4.1.1.3
scPriorityQueuingModeControlmandatory
Queuing operational mode.

Strict - in strict mode the low priority egress queues
are serviced only after the higher priority queue is emptied.

WRR mode - the egress queues serviced accordin…
Enumerationr/w
Enumerated Values:
1strictMode
2wrrMode
3expediteMode
 .1.3.6.1.4.1.81.28.4.1.1.4
scPriorityQueuingDefaultControlmandatory
Setting this value to on(1) returns queuing mode
to default values.

Should return off(2)if the default values are overwritten.

Activating Default control affects the values read from the
sc…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.81.28.4.1.1.5
scPriorityQueuingWRRWeightsmandatory
The array of weights ordered by weight for priority 0 in
position 1 and weight for priority 7 is in position 8.

The number of elements in the array should match the number
of queues defined by scPriority…
OctetStringr/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.81.28.4.1.1.6