Standard view Table view

XEROX-COMMS-CONFIG-MIB

        Version:   5.11.pub
        
The MIB module which supports active configuration discovery
of communications protocol stacks, communications end system
applications, communications intermediate systems, and
communications gateways for network accessible host systems.
        
Usage:  Note that throughout this MIB module, the INDEX clauses
referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices
Group) of the Host Resources MIB (RFC 2790) SHALL
specify host system CPUs (ie, 'hrDeviceProcessor') and shall NOT
specify host system 'network interfaces', with entries in the
'ifTable' (Interfaces Group) of MIB-II (RFC 1213).
        
Copyright (C) 1996-2002 Xerox Corporation. All Rights Reserved.
Source file
XEROX-COMMS-CONFIG-MIB
Last revised
Identity
xcmCommsConfigMIB
Base OID
1.3.6.1.4.1.253.8.64
Imported Objects
HOST-RESOURCES-MIB hrDeviceIndex
IANA-CHARSET-MIB IANACharset
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC RowStatus
XEROX-COMMON-MIB xeroxCommonMIB
XEROX-COMMS-CONFIG-TC XcmCommsConfigGroupSupport XcmCommsDirAttributeType XcmCommsDirRecordType
XEROX-COMMS-ENGINE-TC XcmCommsStackExtProtocol
XEROX-GENERAL-TC Cardinal32 Ordinal32 XcmFixedLocaleUtf8String XcmGenOptionValueSyntax zeroDotZero
Net-SNMP examples using the xerox MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'XEROX-COMMS-CONFIG-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'XEROX-COMMS-CONFIG-MIB::xcmCommsConfigMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-COMMS-CONFIG-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-COMMS-CONFIG-MIB::xcmCommsConfigMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (56)
xcmCommsConfigZeroDummy
.0.0.64
xcmCommsConfigMIB
.1.3.6.1.4.1.253.8.64
xcmCommsConfigMIBConformance
.1.3.6.1.4.1.253.8.64.2
xcmCommsConfigMIBGroups
.1.3.6.1.4.1.253.8.64.2.2
xcmCommsConfig
.1.3.6.1.4.1.253.8.64.3
xcmCommsConfigTable
.1.3.6.1.4.1.253.8.64.3.2
xcmCommsConfigEntry
.1.3.6.1.4.1.253.8.64.3.2.1
xcmCommsConfigRowStatus
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.253.8.64.3.2.1.1
xcmCommsConfigActiveOptionFirst
XEROX-GENERAL-TCCardinal32
 .1.3.6.1.4.1.253.8.64.3.2.1.2
xcmCommsConfigActiveOptionLast
XEROX-GENERAL-TCCardinal32
 .1.3.6.1.4.1.253.8.64.3.2.1.3
xcmCommsConfigGroupSupport
XEROX-COMMS-CONFIG-TCXcmCommsConfigGroupSupport
 .1.3.6.1.4.1.253.8.64.3.2.1.4
xcmCommsConfigCreateSupport
XEROX-COMMS-CONFIG-TCXcmCommsConfigGroupSupport
 .1.3.6.1.4.1.253.8.64.3.2.1.5
xcmCommsConfigUpdateSupport
XEROX-COMMS-CONFIG-TCXcmCommsConfigGroupSupport
 .1.3.6.1.4.1.253.8.64.3.2.1.6
xcmCommsOption
.1.3.6.1.4.1.253.8.64.4
xcmCommsOptionTable
.1.3.6.1.4.1.253.8.64.4.2
xcmCommsOptionEntry
.1.3.6.1.4.1.253.8.64.4.2.1
xcmCommsOptionIndex
XEROX-GENERAL-TCOrdinal32
 .1.3.6.1.4.1.253.8.64.4.2.1.1
xcmCommsOptionNextIndex
XEROX-GENERAL-TCCardinal32
 .1.3.6.1.4.1.253.8.64.4.2.1.10
xcmCommsOptionPreviousIndex
XEROX-GENERAL-TCCardinal32
 .1.3.6.1.4.1.253.8.64.4.2.1.11
xcmCommsOptionFamilyIndex
XEROX-GENERAL-TCCardinal32
 .1.3.6.1.4.1.253.8.64.4.2.1.12
xcmCommsOptionRowStatus
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.253.8.64.4.2.1.2
xcmCommsOptionTypeOID
ObjectIdentifier
 .1.3.6.1.4.1.253.8.64.4.2.1.3
xcmCommsOptionValueSyntax
XEROX-GENERAL-TCXcmGenOptionValueSyntax
 .1.3.6.1.4.1.253.8.64.4.2.1.4
xcmCommsOptionValueInteger
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.253.8.64.4.2.1.5
xcmCommsOptionValueOID
ObjectIdentifier
 .1.3.6.1.4.1.253.8.64.4.2.1.6
xcmCommsOptionValueString
OctetString
 .1.3.6.1.4.1.253.8.64.4.2.1.7
xcmCommsOptionValueLocalization
XEROX-GENERAL-TCCardinal32
 .1.3.6.1.4.1.253.8.64.4.2.1.8
xcmCommsOptionValueCodedCharSet
IANA-CHARSET-MIBIANACharset
 .1.3.6.1.4.1.253.8.64.4.2.1.9
xcmCommsDirRecord
.1.3.6.1.4.1.253.8.64.5
xcmCommsDirRecordTable
.1.3.6.1.4.1.253.8.64.5.2
xcmCommsDirRecordEntry
.1.3.6.1.4.1.253.8.64.5.2.1
xcmCommsDirRecordType
XEROX-COMMS-CONFIG-TCXcmCommsDirRecordType
 .1.3.6.1.4.1.253.8.64.5.2.1.1
xcmCommsDirRecordIndex
XEROX-GENERAL-TCOrdinal32
 .1.3.6.1.4.1.253.8.64.5.2.1.2
xcmCommsDirRecordRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.253.8.64.5.2.1.3
xcmCommsDirRecordKeyType r/w
XEROX-COMMS-CONFIG-TCXcmCommsDirAttributeType
 .1.3.6.1.4.1.253.8.64.5.2.1.4
xcmCommsDirRecordKeyInteger r/w
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.253.8.64.5.2.1.5
xcmCommsDirRecordKeyString r/w
OctetString
 .1.3.6.1.4.1.253.8.64.5.2.1.6
xcmCommsDirRecordParentType r/w
XEROX-COMMS-CONFIG-TCXcmCommsDirRecordType
 .1.3.6.1.4.1.253.8.64.5.2.1.7
xcmCommsDirRecordParentIndex r/w
XEROX-GENERAL-TCCardinal32
 .1.3.6.1.4.1.253.8.64.5.2.1.8
xcmCommsDirAttribute
.1.3.6.1.4.1.253.8.64.6
xcmCommsDirAttributeTable
.1.3.6.1.4.1.253.8.64.6.2
xcmCommsDirAttributeEntry
.1.3.6.1.4.1.253.8.64.6.2.1
xcmCommsDirAttributeType
XEROX-COMMS-CONFIG-TCXcmCommsDirAttributeType
 .1.3.6.1.4.1.253.8.64.6.2.1.1
xcmCommsDirAttributeIndex
XEROX-GENERAL-TCOrdinal32
 .1.3.6.1.4.1.253.8.64.6.2.1.2
xcmCommsDirAttributeRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.253.8.64.6.2.1.3
xcmCommsDirAttributeValue r/w
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.253.8.64.6.2.1.4
xcmCommsDirString
.1.3.6.1.4.1.253.8.64.7
xcmCommsDirStringTable
.1.3.6.1.4.1.253.8.64.7.2
xcmCommsDirStringEntry
.1.3.6.1.4.1.253.8.64.7.2.1
xcmCommsDirStringRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.253.8.64.7.2.1.1
xcmCommsDirStringValue r/w
OctetString
 .1.3.6.1.4.1.253.8.64.7.2.1.2
xcmCommsProtocol
.1.3.6.1.4.1.253.8.64.8
xcmCommsProtocolTable
.1.3.6.1.4.1.253.8.64.8.2
xcmCommsProtocolEntry
.1.3.6.1.4.1.253.8.64.8.2.1
xcmCommsProtocolType
XEROX-COMMS-ENGINE-TCXcmCommsStackExtProtocol
 .1.3.6.1.4.1.253.8.64.8.2.1.1
xcmCommsProtocolRowStatus
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.253.8.64.8.2.1.2
Dependencies (12) 9 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. HOST-RESOURCES-MIBrfc
  8. IANA-CHARSET-MIBrfc
  9. XEROX-COMMON-MIBxerox
  10. XEROX-COMMS-CONFIG-TCxerox
  11. XEROX-COMMS-ENGINE-TCxerox
  12. XEROX-GENERAL-TCxerox
  13. XEROX-COMMS-CONFIG-MIBxeroxselected
Conformance Groups (6)
xcmCommsConfigGroup
xcmCommsConfigRowStatus xcmCommsConfigActiveOptionFirst xcmCommsConfigActiveOptionLast xcmCommsConfigGroupSupport xcmCommsConfigCreateSupport xcmCommsConfigUpdateSupport
The Comms Config Group (Communications Configurations).
 .1.3.6.1.4.1.253.8.64.2.2.3
xcmCommsOptionGroup
xcmCommsOptionRowStatus xcmCommsOptionTypeOID xcmCommsOptionValueSyntax xcmCommsOptionValueInteger xcmCommsOptionValueOID xcmCommsOptionValueString xcmCommsOptionValueLocalization xcmCommsOptionValueCodedCharSet xcmCommsOptionNextIndex xcmCommsOptionPreviousIndex xcmCommsOptionFamilyIndex
The Comms Option Group (Communications Configuration Options).
 .1.3.6.1.4.1.253.8.64.2.2.4
xcmCommsDirRecordGroup
xcmCommsDirRecordRowStatus xcmCommsDirRecordKeyType xcmCommsDirRecordKeyInteger xcmCommsDirRecordKeyString xcmCommsDirRecordParentType xcmCommsDirRecordParentIndex
Directory Record Group.
 .1.3.6.1.4.1.253.8.64.2.2.5
xcmCommsDirAttributeGroup
xcmCommsDirAttributeRowStatus xcmCommsDirAttributeValue
Directory Attribute Group.
 .1.3.6.1.4.1.253.8.64.2.2.6
xcmCommsDirStringGroup
xcmCommsDirStringRowStatus xcmCommsDirStringValue
Directory String Group.
 .1.3.6.1.4.1.253.8.64.2.2.7
xcmCommsProtocolGroup
xcmCommsProtocolRowStatus
Comms Protocol Group (available suites and protocols).
 .1.3.6.1.4.1.253.8.64.2.2.8
Compliance Statements (1)

OID .1.3.6.1.4.1.253.8.64.2.3
The compliance statements for SNMP management agents that
implement the Comms Config MIB.
Required groups
mandatory xcmCommsConfigGroup
mandatory xcmCommsOptionGroup
optional xcmCommsDirRecordGroup Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement directories via SNMP.
optional xcmCommsDirAttributeGroup Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement directories via SNMP.
optional xcmCommsDirStringGroup Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement directories via SNMP.
optional xcmCommsProtocolGroup Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support discovery of available
communications suites and specific protocols via SNMP.
Object refinements
ObjectAccessSyntaxDescription
xcmCommsConfigRowStatus
SNMPv2-TCRowStatus
active(1)
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1).
xcmCommsOptionRowStatus
SNMPv2-TCRowStatus
active(1)
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1).
xcmCommsOptionValueString
OctetString
 It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported.

Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object.
xcmCommsDirRecordRowStatus readonly
SNMPv2-TCRowStatus
active(1)
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1).
xcmCommsDirRecordKeyType readonly
It is conformant to implement this object as read-only.
xcmCommsDirRecordKeyInteger readonly
It is conformant to implement this object as read-only.
xcmCommsDirRecordKeyString readonly
OctetString
 It is conformant to implement this object as read-only, and
only 1 octet maximum string length need be supported.
xcmCommsDirRecordParentType readonly
It is conformant to implement this object as read-only.
xcmCommsDirRecordParentIndex readonly
It is conformant to implement this object as read-only.
xcmCommsDirAttributeRowStatus readonly
SNMPv2-TCRowStatus
active(1)
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1).
xcmCommsDirAttributeValue readonly
It is conformant to implement this object as read-only.
xcmCommsDirStringRowStatus readonly
SNMPv2-TCRowStatus
active(1)
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1).
xcmCommsDirStringValue readonly
OctetString
 It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported.

Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information stored in this string object.