WWP-LEOS-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

wwpLeosEtherPortTable

table

.1.3.6.1.4.1.6141.2.60.2.1.1.1 · 1 row entry · 62 columns

Open in standard view

Table of Ethernet Ports.

wwpLeosEtherPortEntry entry .1.3.6.1.4.1.6141.2.60.2.1.1.1.1

Port Entry in the Ethernet Port Table.

Indexes

wwpLeosEtherPortId

Column Syntax OID

wwpLeosEtherPortId

Port ID for the instance. Port ID's start at 1,
and may not be consecutive for each additional port.
This port Id should refer to the dot1dBasePort in the
Dot1dBasePortEntry.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.1

wwpLeosEtherPortName

A textual string containing information about the
port. This string should indicate about the physical
location of the port as well.

OctetString

Constraints:
range: 0-8

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.2

wwpLeosEtherPortDesc

A textual string containing port description.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.3

wwpLeosEtherPortType

The port type for the port.

Enumeration

Enumerated Values:

1	ethernet
2	fastEthernet
3	hundredFx
4	gigEthernet
5	lagPort
6	unknown
7	gigHundredFx
8	tripleSpeed
9	tenGigEthernet
10	gigTenGigEthernet

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.4

wwpLeosEtherPortPhysAddr

The ethernet MAC address for the port. This information can also
be achieved via dot1dTpFdbTable

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.5

wwpLeosEtherPortAutoNeg

The object sets the port to AUTO NEG MOde and vice versa.
Specific platforms may have requirements of configuring
speed before moving the port to out of AUTO-NEG mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.6

wwpLeosEtherPortAdminStatus

The desired state of the port.

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.7

wwpLeosEtherPortOperStatus

The current operational state of Port.

Enumeration

Enumerated Values:

1	up
2	down
3	notauth
4	lbtx
5	lbrx
6	linkflap

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.8

wwpLeosEtherPortAdminSpeed

Desired speed of the port.
Set the port speed to be either 10MB, 100MB, or gig. Set the
port speed to auto to enable automatic port speed detection.
The default value for this object depends upon the platform.

Enumerationr/w

Enumerated Values:

1	tenMb
2	hundredMb
3	gig
4	auto
5	tenGig

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.9

wwpLeosEtherPortOperSpeed deprecated

The current operational speed of the port.

Enumeration

Enumerated Values:

0	unknown
1	tenMb
2	hundredMb
3	gig
4	tenGig

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.10

wwpLeosEtherPortAdminDuplex

The desired mode for the port. It can be set to either half or
full duplex operation. The default value for this object
depends upon the platform.

Enumerationr/w

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.11

wwpLeosEtherPortOperDuplex

The current duplex mode of the port.

Enumeration

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.12

wwpLeosEtherPortAdminFlowCtrl

Configures the ports flow control operation.

Enumerationr/w

Enumerated Values:

1	unknown
2	off
3	asymTx
4	asymRx
5	sym

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.13

wwpLeosEtherPortOperFlowCtrl

Shows ports flow control configuration.

Enumeration

Enumerated Values:

1	unknown
2	off
3	asymTx
4	asymRx
5	sym

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.14

wwpLeosEtherIngressPvid

The Ingress PVID, the VLAN ID associated with untagged frames ingressing
the port or if tunnel is enabled on this port. The max value for this
object is platform dependent. Refer to architecture document for details
…

Integer32r/w

Constraints:
range: 1-24576

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.15

wwpLeosEtherUntagEgressVlanId

All the egress frames whose VLAN id matches the wwpLeosEtherUntagEgressVlanId, will
egress the port as untagged. To egress the frames tagged set
wwpLeosEtherUntagEgressVlanId to 0. The max value for this object is
pl…

Integer32r/w

Constraints:
range: 0-24576

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.16

wwpLeosEtherPortAcceptableFrameTypes

When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitOnlyUntagged(3) is set,
the device will discard VLAN tagged frames received on
this…

Enumerationr/w

Enumerated Values:

1	admitAll
2	admitOnlyVlanTagged
3	admitOnlyUntagged

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17

wwpLeosEtherPortUntaggedPriority deprecated

The 802.1p packet priority to be assigned to packets ingressing
this port that do not have an 802.1Q VLAN header. This priority
is also assigned to ingress frame if tunnel is enabled on this port.

Enumerationr/w

Enumerated Values:

0	p0
1	p1
2	p2
3	p3
4	p4
5	p5
6	p6
7	p7

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.18

wwpLeosEtherPortMaxFrameSize

Setting this object will set the max frame size allowed on a
port. The max frame size can vary from 1522 bytes to 9216 bytes.
Default value is 1526 bytes.

Integer32r/w

Constraints:
range: 1522-9216

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.19

wwpLeosEtherPortVlanIngressFiltering

When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.20

wwpLeosEtherPortAdminAdvertisedFlowCtrl

This object specifies the advertised flow control
for given port.

Enumerationr/w

Enumerated Values:

1	unknown
2	off
3	asymTx
4	sym
5	symAsymRx

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.21

wwpLeosEtherPortVplsPortType

This object specifies whether port is in subscriber type,
network facing side or both.

Enumeration

Enumerated Values:

1	notDefined
2	subscriber
3	networkFacing

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.22

wwpLeosEtherPortIngressCosPolicy

This object specifies the ingress cos policy to be applied to all
frames coming in on the given port.

Enumerationr/w

Enumerated Values:

1	leave
2	fixed
3	ippInherit
4	phbgInherit

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.23

wwpLeosEtherPortIngressFixedDot1dPri

The 802.1p packet priority to be assigned to packets ingressing
this port that do not have an 802.1Q VLAN header. This priority
is also assigned to ingress untagged frame if the virtual switch
cos policy is set to 'f…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.24

wwpLeosEtherPortUntagDataVsi

This object specifies the virtual switch to be used for this
port if data frame is untagged. If this object is set to 0 then
device will unset this object.
When setting this object to Mpls Vsi Index then wwpLeosEther…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.25

wwpLeosEtherPortOperationalSpeed

An estimate of the port's current bandwidth in k-bits per second
for given port.

kbpsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.26

wwpLeosEtherPortUntagCtrlVsi

This object specifies the virtual switch to be used for this
port if control frame is untagged. If this object is set to 0 then
device will unset this object.
When setting this object to Mpls Vsi Index then wwpLeosEt…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.27

wwpLeosEtherPortMirrorPort

This object defines whether the port will allow traffic from other ports to
be mirrored to this port.
To allow traffic from other ports to be sent to this port, set this object to
True(1). This port is known as a mirro…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.28

wwpLeosEtherPortMirrorIngress

The value of this object is the port index of a mirror port. The ingress traffic
of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort
object to true.
If the value of this object is s…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.29

wwpLeosEtherPortMirrorEgress

The value of this object is the port index of a mirror port. The egress traffic
of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort
object to true.
If the value of this object is se…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.30

wwpLeosEtherPortUntagDataVsiType

This object specifies the virtual switch instance type associated with this
port. This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagDataVsi belongs to ethernet virtual switch table
(wwpLeosVplsVi…

Enumerationr/w

Enumerated Values:

1	ethernet
2	mpls

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.31

wwpLeosEtherPortUntagCtrlVsiType

This object specifies the virtual switch instance type associated with this
port. This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagCtrlVsi belongs to ethernet virtual switch table
(wwpLeosVplsVi…

Enumerationr/w

Enumerated Values:

1	ethernet
2	mpls

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.32

wwpLeosEtherPortVsIngressFiltering

This item is applicable to this port when the port is
added as a per-port member to a virtual switch. If true(1) the device
will discard incoming tagged frames. If false(2) the device will
forwared incoming tagged frame…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.33

wwpLeosEtherPortOperAutoNeg

The object specifies the operational auto neg state.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.34

wwpLeosEtherPortUpTime

The object specifies the port up time in hundredths of a second.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.35

wwpLeosEtherPortUntagDataVid

The Ingress Untagged Data Vid, the VLAN ID stamped on untagged frames
ingressing the port or if tunnel is enabled on this port. To disable
tagging of untagged data on ingress write a value of 0. The max value
for this o…

Integer32r/w

Constraints:
range: 0-24576

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.36

wwpLeosEtherPortPhyLoopback

This object defines whether the phy has been placed in loopback mode,
which causes frames egressing the port to be looped back to the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.37

wwpLeosEtherPortVlanIngressFilterStrict

This item is applicable to this port when the port is
added as a to a virtual switch. If true(1) the legacy ingress filter behavior
will be enforced at member addition (drop bit will be set to drop untagged
traffic). I…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.38

wwpLeosEtherPortMacSaDaSwap

This object defines whether the MAC SA and DA will be swapped on
frames egressing the port. This only works on a 311V.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.39

wwpLeosEtherPortMacSaDaSwapVlan

This object defines whether the MAC SA and DA will be swapped on
specific VLAN frames egressing the port. This only works on a 311V.

Integer32r/w

Constraints:
range: 0-24576

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.40

wwpLeosEtherPortResolvedCosPolicy

The Resolved Cost Policy.
Setting this attribute is not supported in leos version 4

Enumerationr/w

Enumerated Values:

1	dot1d
2	l3DscpCos
3	fixedCos
99	unknown

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.41

wwpLeosEtherPortMode

The mode of the port
Setting this attribute is not supported in leos version 4

Enumerationr/w

Enumerated Values:

1	rj45
2	sfp
3	default
99	unknown

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.42

wwpLeosEtherFixedRcos

The fixed Resolve Cost value.
Setting this attribute is not supported in leos version 4

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.43

wwpLeosEtherPortEgressPortQueueMapId

The Egress-port-Queue associated with this port.
Setting this attribute is not supported in leos version 4

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.44

wwpLeosEtherPortResolvedCosMapId

RCOS map id for the port.
Setting this attribute is not supported in leos version 4

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.45

wwpLeosEtherPortResolvedCosRemarkL2

The object specifies whether to remark L2 based on L3. This applies when the
resolved cos policy is either l3-dscp-cos or dot1d-tag1-cos but not when it is
fixed-cos policy. Setting this attribute is not supported in …

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.46

wwpLeosEtherPortL2TransformMode

L2 transform action for port.
Setting this attribute is not supported in leos version 4

Enumerationr/w

Enumerated Values:

0	none
1	iPush-e-Pop
2	iStamp-Push-e-QualifiedPopStamp
3	iPush-e-PopStamp

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.47

wwpLeosEtherPortLinkFlapDetection

This object defines whether link flap detection will be
enabled on the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.48

wwpLeosEtherPortLinkFlapCount

This object defines how many link down events are required
to trigger a link flap event.

Integer32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.49

wwpLeosEtherPortLinkFlapDetectTime

This object defines the time in seconds during which link
down events are accumlated to trigger a link flap event.

Integer32r/w

Constraints:
range: 1-600

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.50

wwpLeosEtherPortLinkFlapHoldTime

This object defines the time in seconds that a port will
be operationally disabled after a link flap event, before
it is re-enabled. A value of zero causes the port to
remain disabled until manually enabled.

Integer32r/w

Constraints:
range: 0-600

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.51

wwpLeosEtherFixedRColor

This sets the fixed color to green (default) or yellow.
Setting this attribute is not supported in saos version 4

PortIngressFixedColorr/w

Textual Convention: PortIngressFixedColor Enumeration

Type Values:

1	green
2	yellow

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.52

wwpLeosEtherPortFrameCosMapId

Frame COS map id for the port.
Setting this attribute is not supported in leos version 4

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.53

wwpLeosEtherPortEgressCosPolicy

Sets the egress frame cos policy
Setting this attribute is not supported in leos version 4

PortEgressFrameCosPolicyr/w

Textual Convention: PortEgressFrameCosPolicy Enumeration

Type Values:

1	ingore
2	rcosToL2OuterPcpMap

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.54

wwpLeosEtherPortEgressSpeed

An estimate of the port's current egress bandwidth restriction
in k-bits per second for given port. A value of 0 means there
is no active restriction. This attribute not supported in leos
version 6

kbpsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.55

wwpLeosEtherPortAdaptiveRateSpeed

An estimate of the port's current adaptive-rate bandwidth restriction
in k-bits per second for given port. A value of 0 means there is no
active restriction. This attribute not supported in leos version 6

kbpsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.56

wwpLeosEtherPortMirrorEncap

This object defines whether the port will encapsulate mirrored
frames by adding a vlan-tag. (Or, in the case where a mirrored
frame is already tagged, by adding a further vlan-tag to the frame)
To allow mirrored traffic…

Enumerationr/w

Enumerated Values:

0	none
1	vlanTag

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.57

wwpLeosEtherPortMirrorEncapVid

This object defines the VID that will be added to mirrored frames
when the mirroring encapsulation mode is vlan-tag

Integer32r/w

Constraints:
range: 0-24576

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.58

wwpLeosEtherPortMirrorEncapTpid

This object defines the tpid used in the tag that is added to
mirrored frames, when the mirroring encapsulation mode is vlan-tag

Enumerationr/w

Enumerated Values:

1	tpid8100
2	tpid9100
3	tpid88A8

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.59

wwpLeosEtherPortIfgDecrease

This object defines the number of bytes that will be subtracted
from the minimum standard IFG of 12 bytes as defined in IEEE 802.3.
SAOS 6.x only supports a value of 0 or 4.

Integer32r/w

Constraints:
range: 0-5

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.60

wwpLeosEtherPortAdvertSpeed

This object defines the speed capabilities that will be advertised during the auto-negotiation process.

Enumerationr/w

Enumerated Values:

1	not-applicable
2	ten
3	hundred
4	gigabit
5	ten-hundred-gigabit

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.61

wwpLeosEtherPortAdvertDuplex

This object defines the duplex capabilities that will be advertised during the auto-negotiation process.

Enumerationr/w

Enumerated Values:

1	not-applicable
2	half
3	full
4	half-full

.1.3.6.1.4.1.6141.2.60.2.1.1.1.1.62

wwpLeosEtherPortFlushTable

table

.1.3.6.1.4.1.6141.2.60.2.1.1.2 · 1 row entry · 1 columns

Open in standard view

Table of port flush entries.

wwpLeosEtherPortFlushEntry entry .1.3.6.1.4.1.6141.2.60.2.1.1.2.1

Broadcast containment port entry in the Ethernet Port Table.

Indexes

wwpLeosEtherPortId

Column Syntax OID

wwpLeosEtherPortFlushActivate

Setting this object to 'true' will cause
the Macs to be flushed for the port
specified by wwpLeosEtherPortId.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6141.2.60.2.1.1.2.1.1

wwpLeosEtherPortTrapsTable

table

.1.3.6.1.4.1.6141.2.60.2.1.1.3 · 1 row entry · 1 columns

Open in standard view

Table of Ethernet Ports Traps.

wwpLeosEtherPortTrapsEntry entry .1.3.6.1.4.1.6141.2.60.2.1.1.3.1

Port Traps Entry in the Ethernet Port Trap Table.

Indexes

wwpLeosEtherPortId

Column Syntax OID

wwpLeosEtherPortTrapsState

Setting this object will enable or disable all traps on given port.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.6141.2.60.2.1.1.3.1.1

wwpLeosEtherPortStateMirrorGroupTable

table

.1.3.6.1.4.1.6141.2.60.2.1.1.4 · 1 row entry · 7 columns

Open in standard view

This table can be used to keep track of all the port state mirror
groups.
          
To create entry in this table along with indexes following mib 
objects must be set using multiple set operation
wwpLeosEtherPortStateMirrorGroupName must be valid string.
wwpLeosEtherPortStateMirrorGroupStatus must be set.

wwpLeosEtherPortStateMirrorGroupEntry entry .1.3.6.1.4.1.6141.2.60.2.1.1.4.1

Each entry in this table will define the port state mirror group.

Indexes

wwpLeosEtherPortStateMirrorGroupId

Column Syntax OID

wwpLeosEtherPortStateMirrorGroupId

This mib object is used as index in the table and is used
to identify the unique group id.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.6141.2.60.2.1.1.4.1.1

wwpLeosEtherPortStateMirrorGroupName

This mib object is used to specify the name of the group.

OctetStringr/w

Constraints:
range: 1-15

.1.3.6.1.4.1.6141.2.60.2.1.1.4.1.2

wwpLeosEtherPortStateMirrorGroupOperStatus

This mib object is used to specify the operational status of the group.

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.6141.2.60.2.1.1.4.1.3

wwpLeosEtherPortStateMirrorGroupNumSrcPorts

This mib object is used to specify the total number of source ports
that exists in the group.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6141.2.60.2.1.1.4.1.4

wwpLeosEtherPortStateMirrorGroupNumDstPorts

This mib object is used to specify the total number of destination ports
that exists in the group.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6141.2.60.2.1.1.4.1.5

wwpLeosEtherPortStateMirrorGroupStatus

Used to manage the creation and deletion of the
conceptual rows in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6141.2.60.2.1.1.4.1.6

wwpLeosEtherPortStateMirrorGroupType

This mib object is used to specify the directional mode type for the
port state mirror group. A uni-directional(1) mirror group type will only
mirror the port state of the source port(s) to the destination port(s).
The…

Enumerationr/w

Enumerated Values:

1	unidirectional
2	bidirectional

.1.3.6.1.4.1.6141.2.60.2.1.1.4.1.7

wwpLeosEtherPortStateMirrorGroupMemTable

table

.1.3.6.1.4.1.6141.2.60.2.1.1.5 · 1 row entry · 3 columns

Open in standard view

This table is used to keep track of port group membership.

wwpLeosEtherPortStateMirrorGroupMemEntry entry .1.3.6.1.4.1.6141.2.60.2.1.1.5.1

Each entry in this table is used to represent the membership of port
to a given group and group type.

Indexes

wwpLeosEtherPortStateMirrorGroupId wwpLeosEtherPortId

Column Syntax OID

wwpLeosEtherPortStateMirrorGroupMemType

Setting this object will specify the type of group this port is member of for a given port state mirror
group. This object can only be set while creating the entry. This object cannot be modified once entry
is created.

Enumerationr/w

Enumerated Values:

1	srcPort
2	dstPort

.1.3.6.1.4.1.6141.2.60.2.1.1.5.1.1

wwpLeosEtherPortStateMirrorGroupMemOperState

This mib object is used to specify the operational status of the port.

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.6141.2.60.2.1.1.5.1.2

wwpLeosEtherPortStateMirrorGroupMemStatus

Used to manage the creation and deletion of the
conceptual rows in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6141.2.60.2.1.1.5.1.3