WWP-LEOS-NTP-CLIENT-MIB Table View

Table of NTP server information indexed by wwpLeosNtpServerIndex.
To create an entry in the table, use SNMP multiple set operation
and following objects must be set:
wwpLeosNtpServerAddr and wwpLeosNtpServerStatus.
To use MD5 authentication, wwpLeosNtpServerKeyId must be set at the time
of creation along with wwpLeosNtpServerAddr and wwpLeosNtpServerStatus,
otherwise no MD5 authentication will be used.

wwpLeosNtpClientEntry row .1.3.6.1.4.1.6141.2.60.18.1.1.4.1

An entry for each NTP server.

Indexes

wwpLeosNtpServerIndex

Column	Syntax	OID
wwpLeosNtpServerIndex Specifies the unique index of the entry.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.1
wwpLeosNtpServerAddrType Specifies the type of address wwpLeosNtpServerAddr belongs to.	IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbersr/w Type Values: 0 other 1 ipV4 2 ipV6 3 nsap 4 hdlc 5 bbn1822 6 all802 7 e163 8 e164 9 f69 10 x121 11 ipx 12 appleTalk 13 decnetIV 14 banyanVines 15 e164withNsap 16 dns 17 distinguishedName 18 asNumber 19 xtpOverIpv4 20 xtpOverIpv6 21 xtpNativeModeXTP 22 fibreChannelWWPN 23 fibreChannelWWNN 24 gwid 25 afi 26 mplsTpSectionEndpointIdentifier 27 mplsTpLspEndpointIdentifier 28 mplsTpPseudowireEndpointIdentifier 29 mtipmultitopologyipversion4 30 mtipv6multitopologyipversion6 31 bgpSfc 16384 eigrpCommonServiceFamily 16385 eigrpIpv4ServiceFamily 16386 eigrpIpv6ServiceFamily 16387 lispCanonicalAddressFormat 16388 bgpLs 16389 fortyeightBitMac 16390 sixtyfourBitMac 16391 oui 16392 mac24 16393 mac40 16394 ipv664 16395 rBridgePortID 16396 trillNickname 16397 universallyUniqueIdentifier 16398 routingPolicyAfi 16399 mplsNamespaces 65535 reserved	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.2
wwpLeosNtpServerAddr The IP address or host name of the NTP server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.3
wwpLeosNtpServerResolvedAddr Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host name. If wwpLeosNtpServerAddr is set to IP address then wwpLeosNtpServerResolvedAddr will be the same as wwpLeosNtpServerAddr. If the IP address …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.4
wwpLeosNtpServerUserPrideprecated This object is no longer implemented as the NTP client determines the server's relative priority or preference relative to other configured servers. Reads will always return 1 and writes will be quietly ignored. This ob…	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.5
wwpLeosNtpServerDhcpPrideprecated This object is no longer implemented as the NTP client determines the server's relative priority or preference relative to other configured servers. Reads will always return 1 and writes will quietly be ignored. This ob…	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.6
wwpLeosNtpServerUserAdminState This object is used to specify the user admin state of the wwpLeosNtpServerAddr.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.7
wwpLeosNtpServerScope This object is used to specify the scope for the entry. It specifies if the entry is configured by dhcp/user/both.	Enumeration Enumerated Values: 1 user 2 dhcp 3 both	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.8
wwpLeosNtpServerOperState This object is used to specify the operational state of the wwpLeosNtpServerAddr.	Enumeration Enumerated Values: 1 enabled 2 disabled 3 notConfigured	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.9
wwpLeosNtpServerStatus To create a row in this table, a manager must set this object to 'createAndGo'. The server added will only be effective when NTP client is enabled. To create entry in the table use SNMP multiple set operation and foll…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.10
wwpLeosNtpServerKeyId This object is used to specify the MD5 key ID that that the server will use. A 0 key ID implies no MD5 key.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.11
wwpLeosNtpServerState This object reflects the current connection status of the server.	Enumeration Enumerated Values: 1 reject 2 insane 3 correct 4 standby 5 candidate 6 selected 7 syspeer 8 ppspeer 255 reaching 256 error	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.12
wwpLeosNtpServerResolvedInetAddrType Specifies the type of address wwpLeosNtpServerResolvedInetAddr belongs to. When set to: ipv4 : wwpLeosNtpServerResolvedInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : wwpLeosNtpServe…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.13
wwpLeosNtpServerResolvedInetAddr Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host name. If wwpLeosNtpServerAddr is set to IP address then wwpLeosNtpServerResInetAddr will be the same as wwpLeosNtpServerAddr. The InetAddress spe…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6141.2.60.18.1.1.4.1.14

The (conceptual) table listing the key-id and MD5 key.

wwpLeosNtpAuthEntry row .1.3.6.1.4.1.6141.2.60.18.1.1.5.1

An entry (conceptual row) in the wwpLeosNtpAuthTable.

Indexes

wwpLeosNtpAuthKeyId

Column	Syntax	OID
wwpLeosNtpAuthKeyId This object specifies the key ID. It is also used as index in the table.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.6141.2.60.18.1.1.5.1.1
wwpLeosNtpAuthMd5Key Used to specify the MD5 key to use with this key identifier.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.6141.2.60.18.1.1.5.1.2
wwpLeosNtpAuthRowStatus To create a row in this table, a manager must set this object to 'createAndGo'. The server added will only be effective when NTP client is enabled. To create entry in the table use SNMP multiple set operation and foll…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.18.1.1.5.1.3
wwpLeosNtpAuthMD5KeyEnc Used to specify the encrypted MD5 key to use with this key identifier.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.6141.2.60.18.1.1.5.1.4

Table of NTP Multicast Addresses indexed by wwpLeosNtpMulticastIndex.
To create an entry in the table, use SNMP multiple set operation
and following objects must be set:
wwpLeosNtpMulticastInetAddrType and wwpLeosNtpMulticastInetAddr.

wwpLeosNtpMulticastEntry row .1.3.6.1.4.1.6141.2.60.18.1.1.18.1

An entry for each NTP multicast addresses.

Indexes

wwpLeosNtpMulticastIndex

Column	Syntax	OID
wwpLeosNtpMulticastIndex Specifies the unique index of the entry.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.6141.2.60.18.1.1.18.1.1
wwpLeosNtpMulticastInetAddrType Specifies the type of address wwpLeosNtpMulticastInetAddr belongs to. When set to: ipv4 : wwpLeosNtpMulticastInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : wwpLeosNtpMulticastInetAd…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6141.2.60.18.1.1.18.1.2
wwpLeosNtpMulticastInetAddr Specifies the NTP multicast address. The InetAddress specified here will be compliant with RFC 4001.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6141.2.60.18.1.1.18.1.3
wwpLeosNtpMulticastRowStatus To create a row in this table, a manager must set this object to 'createAndGo'. To create entry in the table use SNMP multiple set operation and following objects must be set: wwpLeosNtpMulticastInetAddrType, wwpLeosNt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.18.1.1.18.1.4