UTEPON4000CONF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
54

utsEponModuleBoardTable

table
.1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1 · 1 row entry · 25 columns
Open in standard view
Uses the utstarcom variant from /opt/observium/mibs/utstarcom.
Command help
Walk utsEponModuleBoardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UTEPON4000CONF-MIB' -M '/opt/observium/mibs/utstarcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UTEPON4000CONF-MIB::utsEponModuleBoardTable' 
A list of board information in a EPON box.
utsEponModuleBoardEntry row .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1
An entry contains board information on a module.
Indexes
Column Syntax OID
utsEponModuleBoardPhyId
The physical module number, 1-12 means service card, 13 means CSM A, 14 means CSM B.
Integer32
Constraints:
range: 1-14
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.1
utsEponModuleBoardType
The line card type. In bbs4000, current 4 kind board are supported:
csm(2) -- controller and switch fabric card,
epm04a(3) -- epon service access line card using the Passave Chip,
epm04b(4) -- epon service access line c…
Enumeration
Enumerated Values:
1other
2csm
3epm04a
4epm04b
5epm04c
6gem04a
7gem04b
8xgm01a
9osm04a
10gpm02a
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.2
utsEponModulePhyPresenceStat
The line card type. In EPON, BCM, OLT are supported
Enumeration
Enumerated Values:
1installed
2not-installed
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.3
utsEponModuleAdminState
administrative state changed by operator,
locked(1) -- the slot is disabled for service
unlocked (2) -- the slot can provide service
reset(8) -- reset the slot
Enumerationr/w
Enumerated Values:
1locked
2unlocked
8reset
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.4
utsEponModuleOperationState
The internal state of line card
Enumeration
Enumerated Values:
2inactive
3active
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.5
utsEponModuleRedundancyState
The redundancy state of CSM module, for other line card, the unique state is other(1).
Enumeration
Enumerated Values:
1other
2active
3standby
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.6
utsEponModulePhyicalUptime
when the physical module is up.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.8
utsEponOpStateUptime
when the oepration state of this module become active.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.9
utsEponModuleCSMSwitchtime
when the oepration state of this module become active.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.11
utsEponModuleBoardSwVer
Software version of the board. The software verion is applicable
to the whole box and therefore belongs to the GSM board. For LTM
boards, the this object returns 'None'.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.12
utsEponModuleBoardBootromVer
The Bootrom version of the board. The Bootrom verion is
applicable to the whole box and therefore belongs to the GSM board.
For LTM boards, the this object returns 'None'.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.13
utsEponModuleBoardPassaveVer
The Passave Olt Firmware revision for the LTM board. Each of the
two LTM boards has a copy of the firmware running therefore both
will show a firmware version. For now, however, the two are always
the same. For GSM …
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.14
utsEponModuleBoardCurTemp
The current temperature of physical slot.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.15
utsEponModuleBoardTempUpLimit
The maximum threshold of physical slot temperature. The default value is 70.
It is suggested this value shall be greater than up clear limit value for 5.
Integer32r/w
Constraints:
range: 0-70
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.16
utsEponModuleBoardTempUpClearLimit
The up clear limit of physical slot temperature. The default value is 65.
It is suggested this value shall be lower than up limit value for 5.
Integer32r/w
Constraints:
range: 0-70
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.17
utsEponModuleBoardLastAdminStateChangetime
Last Administrative State Change Time Till Now (TimeTicks).
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.18
utsEponModuleBoardLastOperationStateChangetime
Last Operational State Change Time Till Now (TimeTicks).
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.19
utsEponModuleBoardDisableCause
The disable Cause.
Enumeration
Enumerated Values:
1adminlock
2lostcurrentstate
3serviceunavailable
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.20
utsEponModuleBoardHwVer
Hw version of the board
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.21
utsEponModuleBoardCpldVer
CPLD version of the board
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.22
utsEponModuleBoardSerialNumber
SN information of the board
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.23
utsEponModuleBoard2424Information
2424 information of the board
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.24
utsEponModuleBoardHASyncStatus
The HA Sync status for the initial sync when the standby card insert.
Enumeration
Enumerated Values:
1notstart
2syncing
3syncover
4syncfail
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.26
utsEponModuleBoardCpuUtil
The current cpu util of the board, in the current system, only csm board should be readed, and
the value should be from 0 to 1000.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.27
utsEponModuleBoardMemUtil
The current memory util of the board, in the current system, only csm board should be readed, and
the value should be from 0 to 1000.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.1.1.28

utsLedPonSlotLedDispTable

table
.1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the utstarcom variant from /opt/observium/mibs/utstarcom.
Command help
Walk utsLedPonSlotLedDispTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UTEPON4000CONF-MIB' -M '/opt/observium/mibs/utstarcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UTEPON4000CONF-MIB::utsLedPonSlotLedDispTable' 
bbs system PON slot LED state display table.
utsLedPonSlotLedDispEntry row .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1
An entry containing led state information of a pon slot.
Indexes
Column Syntax OID
utsLedPonSlotLedDispSlotId
A read-only value that identifies the pon module slot id.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.1
utsLedPonSlotLedDispPowLedStat
pon slot power supply LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.2
utsLedPonSlotLedDispRunLedStat
pon slot run LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.3
utsLedPonSlotLedDispFaultLedStat
pon slot fault LED state.
Enumeration
Enumerated Values:
1red-on
2red-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.4
utsLedPonSlotLedDispSwapLedStat
pon slot hot swap LED state.
Enumeration
Enumerated Values:
1yellow-on
2yellow-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.5
utsLedPonSlotLedDispPonPort1OprLedStat
pon slot pon port 1 Operation LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.6
utsLedPonSlotLedDispPonPort1FaultLedStat
pon slot pon port 1 Fault LED state.
Enumeration
Enumerated Values:
1red-on
2red-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.7
utsLedPonSlotLedDispPonPort2OprLedStat
pon slot pon port 2 Operation LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.8
utsLedPonSlotLedDispPonPort2FaultLedStat
pon slot pon port 2 Fault LED state.
Enumeration
Enumerated Values:
1red-on
2red-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.9
utsLedPonSlotLedDispPonPort3OprLedStat
pon slot pon port 3 Operation LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.10
utsLedPonSlotLedDispPonPort3FaultLedStat
pon slot pon port 3 Fault LED state.
Enumeration
Enumerated Values:
1red-on
2red-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.11
utsLedPonSlotLedDispPonPort4OprLedStat
pon slot pon port 4 Operation LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.12
utsLedPonSlotLedDispPonPort4FaultLedStat
pon slot pon port 4 Fault LED state.
Enumeration
Enumerated Values:
1red-on
2red-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.2.1.1.13

utsLedGEPortSlotLedDispTable

table
.1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the utstarcom variant from /opt/observium/mibs/utstarcom.
Command help
Walk utsLedGEPortSlotLedDispTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UTEPON4000CONF-MIB' -M '/opt/observium/mibs/utstarcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UTEPON4000CONF-MIB::utsLedGEPortSlotLedDispTable' 
bbs system GE Port slot LED state display table.
utsLedGEPortSlotLedDispEntry row .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1
An entry containing led state information of a GE port slot.
Indexes
Column Syntax OID
utsLedGEPortSlotLedDispSlotId
A read-only value that identifies the GE module slot id.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.1
utsLedGEPortSlotLedDispPowLedStat
GE port slot power supply LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.2
utsLedGEPortSlotLedDispRunLedStat
GE port slot run LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.3
utsLedGEPortSlotLedDispFaultLedStat
GE port slot fault LED state.
Enumeration
Enumerated Values:
1red-on
2red-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.4
utsLedGEPortSlotLedDispSwapLedStat
GE port slot hot swap LED state.
Enumeration
Enumerated Values:
1yellow-on
2yellow-off
3flashing
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.5
utsLedGEPortSlotLedDispPort1LinkLedStat
GE slot GE port 1 Link LED state,if the board type is xgm01a,then use this item only.
Enumeration
Enumerated Values:
1green-on
2green-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.6
utsLedGEPortSlotLedDispPort2LinkLedStat
GE slot GE port 2 Link LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.8
utsLedGEPortSlotLedDispPort3LinkLedStat
GE slot GE port 3 Link LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.10
utsLedGEPortSlotLedDispPort4LinkLedStat
GE slot GE port 4 Link LED state.
Enumeration
Enumerated Values:
1green-on
2green-off
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.1.1.4.6.3.1.1.12

utsMonitorSessionControlTable

table
.1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the utstarcom variant from /opt/observium/mibs/utstarcom.
Command help
Walk utsMonitorSessionControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UTEPON4000CONF-MIB' -M '/opt/observium/mibs/utstarcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UTEPON4000CONF-MIB::utsMonitorSessionControlTable' 
Table for monitor session MIB objects.
utsMonitorSessionControlEntry row .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1
An entry in the monitor session control MIB table.
Indexes
Column Syntax OID
utsMonitorSessionID
Monitor session ID.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1.1
utsMonitorSessionModule
Monitor session control module number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1.2
utsMonitorSessionPort
Monitor session control port umber.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1.3
utsMonitorSessionIngressPortBitLists
Monitor session control ingress port bit lists .
OctetStringr/w .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1.4
utsMonitorSessionEngressPortBitLists
Monitor session control ingress port bit lists .
OctetStringr/w .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1.5
utsMonitorSessionActive
Monitor session enable or disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1.6
utsMonitorSessionRowStatus
Row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1949.1.3.10.200.6.2.2.1.5.3.1.1.7