TIMETRA-WLAN-MIB Table View

The tmnxWlanPortTable has an entry for each WLAN Port known to the
system.

tmnxWlanPortEntry row .1.3.6.1.4.1.6527.3.1.2.117.2.1.1.1

Each row entry represents a network description for a WLAN in the
system.

Indexes

TIMETRA-PORT-MIBtmnxPortPortID

Column	Syntax	OID
tmnxWlanPortMode The value of tmnxWlanPortMode specifies the type of WLAN access this port provides.	Enumeration Enumerated Values: 0 unknown 1 access-point 2 station	.1.3.6.1.4.1.6527.3.1.2.117.2.1.1.1.1
tmnxWlanPortRadio The value of tmnxWlanPortRadio specifies the radio on this MDA that this port belongs to.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.2.1.1.1.2
tmnxWlanPortOperFlags The value of tmnxWlanPortOperFlags indicates the reasons that this port is not in service. adminDown | Port is admin down rfAdminDown | Radio is admin down rfChNotLocked | No channel has been sel…	Bits Enumerated Values: 0 adminDown 1 rfAdminDown 2 rfChNotLocked 3 noRadiusPlcyCfg 4 dot1xDisabled 5 radiusPlcyDisabled 6 noRadiusAuthSvr 7 noNasIpAddr 8 dfsChannelNotAllowed	.1.3.6.1.4.1.6527.3.1.2.117.2.1.1.1.3

The tmnxWlanNetworkTable has an entry for each WLAN Network known to
the system.

tmnxWlanNetworkEntry row .1.3.6.1.4.1.6527.3.1.2.117.2.1.2.1

Each row entry represents a network description for a WLAN in the
system.

Indexes

TIMETRA-PORT-MIBtmnxPortPortID tmnxWlanNetworkId

Column	Syntax	OID
tmnxWlanNetworkId The value of tmnxWlanNetworkId specifies a wireless network.	TmnxWlanNetworkId Type Constraints: range: 1..10 Description: TmnxWlanNetworkId identifies a specific WLAN Network definition in the system.	.1.3.6.1.4.1.6527.3.1.2.117.2.1.2.1.1
tmnxWlanNetworkRowStatus The value of tmnxWlanNetworkRowStatus specifies the row status of the WLAN Network entry. It is used to control the creation and deletion of WLAN Network description. Only one row entry with index tmnxWl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.117.2.1.2.1.2
tmnxWlanNetworkSSID The value of tmnxWlanNetworkSSID specifies the Service Set Identifier (SSID) for the network.	TmnxWlanSSIDr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 1..32 Description: The data type TmnxWlanSSID represents the WLAN service set identifier Access Point Name (APN).	.1.3.6.1.4.1.6527.3.1.2.117.2.1.2.1.3

The tmnxWlanNetworkSecurityTable has an entry for each WLAN Network
known to the system.

tmnxWlanNetworkSecurityEntry row .1.3.6.1.4.1.6527.3.1.2.117.2.1.3.1

Each row entry represents a network description for a WLAN in the
system.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxWlanNetworkSecurity The value of tmnxWlanNetworkSecurity specifies the type of security to access this network.	Enumerationr/w Enumerated Values: 0 none 1 wpa2-psk 2 wpa2-enterprise	.1.3.6.1.4.1.6527.3.1.2.117.2.1.3.1.1
tmnxWlanNetworkWpaEncryption The value of tmnxWlanNetworkWpaEncryption specifies the type of encryption permitted on this network.	Enumerationr/w Enumerated Values: 0 none 1 aes 2 tkip	.1.3.6.1.4.1.6527.3.1.2.117.2.1.3.1.2
tmnxWlanNetworkWpaPassphrase The value of tmnxWlanNetworkWpaPassphrase specifies the WPA/WPA2 Pre-Shared Passphrase for the network.	TmnxWlanWpaPassphraser/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0 range: 8..63 Description: The data type TmnxWlanWpaPassphrase represents the WLAN WPA/WPA2 passphrase to access the network.	.1.3.6.1.4.1.6527.3.1.2.117.2.1.3.1.3
tmnxWlanNetworkAuthType The value of tmnxWlanNetworkAuthType specifies the type of authentication used by the WLAN network. For WLAN networks configured on ports with tmnxWlanPortMode set to 'access-point', the value of tmnxWlan…	Enumerationr/w Enumerated Values: 0 not-applicable 1 none 2 eap-ttls 3 eap-peap 4 eap-fast	.1.3.6.1.4.1.6527.3.1.2.117.2.1.3.1.4
tmnxWlanNetworkAuthUsername The value of tmnxWlanNetworkAuthUsername specifies the username to use for authenticating the SROS series system on the WLAN network.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.117.2.1.3.1.5
tmnxWlanNetworkAuthPassword The value of tmnxWlanNetworkAuthPassword specifies the password to use for authenticating the SROS series system on the WLAN network. A get request on this object always returns an empty string.	TIMETRA-TC-MIBTmnxAuthPasswordr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..64 Description: The TmnxAuthPassword data type contains a password used for authentication of subscribers.	.1.3.6.1.4.1.6527.3.1.2.117.2.1.3.1.6

The tmnxWlanAPTable contains configuration for each WLAN Access Point
on the system.

tmnxWlanAPEntry row .1.3.6.1.4.1.6527.3.1.2.117.2.1.4.1

Each row entry contains configuration information for a specific WLAN
Access Point on the system.

Indexes

TIMETRA-PORT-MIBtmnxPortPortID

Column	Syntax	OID
tmnxWlanAPBroadcastSSID The value of tmnxWlanAPBroadcastSSID specifies whether the access point should return the Service Set Identifier (SSID) to probes that do not contain the SSID.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.117.2.1.4.1.1
tmnxWlanAPClientLimit The value of tmnxWlanAPClientLimit specifies the maximum number of stations that can be connected at one time.	Unsigned32r/w Constraints: range: 1-24	.1.3.6.1.4.1.6527.3.1.2.117.2.1.4.1.2
tmnxWlanAPClientTimeout The value of tmnxWlanAPClientTimeout specifies the amount of time a station may be idle before it is disconnected from the access point.	secondsUnsigned32r/w Constraints: range: 60-86400	.1.3.6.1.4.1.6527.3.1.2.117.2.1.4.1.3
tmnxWlanAPDot1xRadiusPlcy tmnxWlanAPDot1xRadiusPlcy specifies the name of the Radius Policy. The Radius Policy specifies the parameters that control the Radius Protocol. If no Policy is specified (empty string) no Radius authenticat…	TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Based On: TNamedItemOrEmpty Description: The name of a policy statement, when an object refers to it.	.1.3.6.1.4.1.6527.3.1.2.117.2.1.4.1.4
tmnxWlanAPDot1xReauthPeriod The value of tmnxWlanAPDot1xReauthPeriod specifies the amount of time before a station must reauthorize when using EAP security.	secondsUnsigned32r/w Constraints: range: 1-9000	.1.3.6.1.4.1.6527.3.1.2.117.2.1.4.1.5
tmnxWlanAPDhcpAdminState The value of tmnxWlanAPDhcpAdminState specifies the administrative state of DHCP snooping on the access point.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService Description: The TmnxAdminState data type is an enumerated integer that describes the values used to identify the administratively desired state of functional modules.	.1.3.6.1.4.1.6527.3.1.2.117.2.1.4.1.6

The tmnxWlanRadioTable has an entry for each WLAN Radio known to the
system.

tmnxWlanRadioEntry row .1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1

Each row entry represents a radio on an MDA card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-CHASSIS-MIBtmnxCardSlotNum TIMETRA-CHASSIS-MIBtmnxMDASlotNum tmnxMDARadioNum

Column	Syntax	OID
tmnxMDARadioNum The unique value which identifies this radio within a specific MDA in the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.1
tmnxWlanRadioType The value of tmnxWlanRadioType specifies the type of radio (antenna) is equipped.	TmnxWlanRadioType Type Values: 0 unknown 1 dualbandWifi Description: The type of WLAN radio.	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.2
tmnxWlanRadioAdminStatus The value of tmnxWlanRadioAdminStatus indicates the administrative status of the radio.	TmnxWlanRadioAdminStatusr/w Type Values: 1 inService 2 outOfService Description: The desired administrative status of this radio.	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.3
tmnxWlanRadioCountry The value of tmnxWlanRadioCountry specifies the country this radio is operating in.	Enumerationr/w Enumerated Values: 0 none 1 australia 2 belgium 3 bolivia 4 brazil 5 canada 6 chile 7 colombia 8 france 9 germany 10 india 11 iran 12 italy 13 japan 14 malaysia 15 mexico 16 newZealand 17 peru 18 russia 19 singapore 20 southAfrica 21 usa 22 venezuela	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.4
tmnxWlanRadioCfgFreqBand The value of tmnxWlanRadioCfgFreqBand specifies the preferred band this radio operates in.	TmnxWlanRadioFreqBandr/w Type Values: 0 unknown 1 band24Ghz 2 band50Ghz Description: The frequency band of the radio. band24Ghz : 2.4 GHz band50Ghz : 5.0 GHz	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.5
tmnxWlanRadioCfgChannel The value of tmnxWlanRadioCfgChannel specifies the preferred channel number within the frequency band this radio operates at. A value of (0) indicates the channel should be automatically selected to minim…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.6
tmnxWlanRadioCfgChBandwidth The value of tmnxWlanRadioCfgChBandwidth specifies the width of the selected channel.	TmnxWlanRadioChBandwidthr/w Type Values: 0 unknown 1 width20mhz 2 width40mhz Description: The value of channel size (bandwidth).	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.7
tmnxWlanRadioApBeaconInterval The value of tmnxWlanRadioApBeaconInterval specifies the beacon transmission interval for radio access points.	msecsUnsigned32r/w Constraints: range: 75-999	.1.3.6.1.4.1.6527.3.1.2.117.2.2.1.1.8

The tmnxWlanRadioOperTable has an entry for each WLAN Radio known to
the system.

tmnxWlanRadioOperEntry row .1.3.6.1.4.1.6527.3.1.2.117.3.2.1

Each row entry represents a radio on an MDA card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-CHASSIS-MIBtmnxCardSlotNum TIMETRA-CHASSIS-MIBtmnxMDASlotNum tmnxMDARadioNum

Column	Syntax	OID
tmnxWlanRadioOperStatus The value of tmnxWlanRadioOperStatus indicates the operational status of the radio.	TmnxWlanRadioOperStatus Type Values: 0 unknown 1 down 2 scanning 3 up Description: The desired operational status of this radio.	.1.3.6.1.4.1.6527.3.1.2.117.3.2.1.1
tmnxWlanRadioOperFreqBand The value of tmnxWlanRadioOperFreqBand specifies the band this radio is operating in.	TmnxWlanRadioFreqBand Type Values: 0 unknown 1 band24Ghz 2 band50Ghz Description: The frequency band of the radio. band24Ghz : 2.4 GHz band50Ghz : 5.0 GHz	.1.3.6.1.4.1.6527.3.1.2.117.3.2.1.2
tmnxWlanRadioOperChannel The value of tmnxWlanRadioOperChannel indicates the channel number within the frequency band this radio operates at. A value of (0) indicates the channel is not selected.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.3.2.1.3
tmnxWlanRadioOperChBandwidth The value of tmnxWlanRadioOperChBandwidth indicates the width of the selected channel.	TmnxWlanRadioChBandwidth Type Values: 0 unknown 1 width20mhz 2 width40mhz Description: The value of channel size (bandwidth).	.1.3.6.1.4.1.6527.3.1.2.117.3.2.1.4
tmnxWlanRadioOperCentreFreq The value of tmnxWlanRadioOperCentreFreq indicates the centre frequency this radio is operating in.	MHzSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.3.2.1.5

The tmnxWlanAPOperTable contains operational information for each WLAN
Access Point configured on the system.

tmnxWlanAPOperEntry row .1.3.6.1.4.1.6527.3.1.2.117.3.3.1

Each row entry contains operational information for a WLAN Access
Point configured on the system.

Indexes

TIMETRA-PORT-MIBtmnxPortPortID

Column	Syntax	OID
tmnxWlanAPConnectedClients The value of tmnxWlanAPConnectedClients specifies the number of clients currently connected.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.3.3.1.1
tmnxWlanAPTotalAttaches The value of tmnxWlanAPTotalAttaches specifies the total number of clients that have attached to this access point.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.117.3.3.1.2
tmnxWlanAPTotalDetaches The value of tmnxWlanAPTotalDetaches specifies the total number of clients that have detached from this access point.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.117.3.3.1.3
tmnxWlanAPTotalAuthSuccess The value of tmnxWlanAPTotalAuthSuccess specifies the total number of clients that have successfully authenticated on this access point.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.117.3.3.1.4
tmnxWlanAPTotalAuthFails The value of tmnxWlanAPTotalAuthFails specifies the total number of client attempts that have failed to authenticate on this access point.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.117.3.3.1.5

The tmnxWlanAPClientTable has an entry for each WLAN Access Point
client connected to the system.

tmnxWlanAPClientEntry row .1.3.6.1.4.1.6527.3.1.2.117.3.4.1

Each row entry represents a network description for a WLAN AP in the
system.

Indexes

TIMETRA-PORT-MIBtmnxPortPortID tmnxWlanAPClientMacAddress

Column	Syntax	OID
tmnxWlanAPClientMacAddress The value of the object tmnxWlanAPClientMacAddress indicates the MAC address of this client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.117.3.4.1.1
tmnxWlanAPClientConnectTime The value of tmnxWlanAPClientConnectTime indicates the sysUpTime at the time of this client connected.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.117.3.4.1.2
tmnxWlanAPClientAuthorized The value of tmnxWlanAPClientAuthorized indicates whether this client has successfully authenticated.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.117.3.4.1.3

The tmnxWlanClientNetworkOperTable contains operational information
for WLAN networks known by the WLAN station on the system.

tmnxWlanClientNetworkOperEntry row .1.3.6.1.4.1.6527.3.1.2.117.3.5.1

Each row entry contains operational information for a WLAN network
known by the WLAN station on the system.

Indexes

TIMETRA-PORT-MIBtmnxPortPortID tmnxWlanNetworkId

Column	Syntax	OID
tmnxWlanNetworkIsConnected The value of tmnxWlanNetworkIsConnected indicates the whether the WLAN station is currently connected to this WLAN network.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.117.3.5.1.1
tmnxWlanNetworkConnectTime The value of tmnxWlanNetworkConnectTime indicates when the system last established a connection to this WLAN network. A value of '0000000000000000000000' indicates that the system has never established a …	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.117.3.5.1.2
tmnxWlanNetworkBssid The value of tmnxWlanNetworkBssid indicates the basic service set id of the access point for this WLAN network. The value of all zeroes indicates that the system does not know the BSSID of the access poin…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.117.3.5.1.3
tmnxWlanNetworkChannel The value of tmnxWlanNetworkChannel indicates the channel number in use by the access point for this WLAN network. A value of 0 indicates that the system does not know the channel number of the access poi…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.3.5.1.4
tmnxWlanNetworkFrequency The value of tmnxWlanNetworkFrequency indicates the centre frequency of the channel in use by the access point for this WLAN network. A value of 0 indicates that the system does not know the channel of th…	MHzSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.117.3.5.1.5
tmnxWlanNetworkBandwidth The value of tmnxWlanNetworkBandwidth specifies the width of the selected channel.	TmnxWlanRadioChBandwidth Type Values: 0 unknown 1 width20mhz 2 width40mhz Description: The value of channel size (bandwidth).	.1.3.6.1.4.1.6527.3.1.2.117.3.5.1.6
tmnxWlanNetworkRxSignalLevel The value of tmnxWlanNetworkRxSignalLevel indicates the level of the signal of the access point, as received on the station, in dBm. A value of -100 dBm indicates that the station is not receiving a signa…	dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.117.3.5.1.7