TIMETRA-OAM-SERV-ACTIV-TEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
144
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1 · 1 row entry · 18 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tmnxOamSathCfgSvcTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB::tmnxOamSathCfgSvcTestTable'
tmnxOamSathCfgSvcTestTable contains the configuration information for
service tests.
tmnxOamSathCfgSvcTestEntry row .1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1
tmnxOamSathCfgSvcTestEntry contains the configuration information for
one service test.

Rows are created or destroyed using tmnxOamSathCfgSvcTestRowStatus.
Column Syntax OID
The value of tmnxOamSathCfgSvcTestName specifies the name of the
service test to be configured or read.
TIMETRA-TC-MIBTLNamedItem
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 1..64
Description:
The long name of an item. When used as an index to a table, the item
name uniquely identifies the instance. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, u…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.1
The value of tmnxOamSathCfgSvcTestRowStatus specifies the status of
the configuration row for the service test.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.2
The value of tmnxOamSathCfgSvcTestLastChanged indicates the most
recent time the value of a settable object in this row was changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.3
The value of tmnxOamSathCfgSvcTestAdminState specifies the
administrative state of the service test.

When this value is 'enabled(1)', only the following objects in the row
can be changed:
tmnxOamSathC…
TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w
Type Values:
1enabled
2disabled
Description:
The TmnxEnabledDisabledAdminState data type is an enumerated integer
that describes the values used to identify whether an entity is
'enabled' or 'disabled'. It is to be used for admin state leafs.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.4
The value of tmnxOamSathCfgSvcTestRunOprState specifies the
operational state of the service test.

'none(1)' indicates there is no currently active run for this service
test.

'running(2)' i…
Enumerationr/w
Enumerated Values:
1none
2running
3start
4stop
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.5
The value of tmnxOamSathCfgSvcTestDescription specifies the
descriptive text for the service test.
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.6
The value of tmnxOamSathCfgSvcTestAccntPolicy specifies the
accounting policy for the service test. Zero specifies that
no accounting policy has been assigned.

The assigned accounting policy must have
TI…
Unsigned32r/w
Constraints:
range: 0-99
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.7
The value of tmnxOamSathCfgSvcTestComplNotif specifies whether or not
to raise a tmnxOamSathSvcTestCompleted trap when the service test
completes.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
Description:
The TmnxEnabledDisabled data type is an enumerated integer that
describes the values used to identify whether an entity is 'enabled'
or 'disabled'.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.8
The value of tmnxOamSathCfgSvcTestStrRunOrder specifies the run order
for the tests owned by the service test.
TmnxOamSathSvcTestStrRunOrderr/w
Type Values:
1sequential
2parallel
Description:
An object of type TmnxOamSathSvcTestStrRunOrder indicates, for
example, whether or not all the CIR tests belonging to a
service test run in parallel. Similarly, the other test
types.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.9
The value of tmnxOamSathCfgSvcTestDrCirMin specifies the 'minutes'
component of the duration of CIR tests owned by the service test.
minutesUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.10
The value of tmnxOamSathCfgSvcTestDrCirSec specifies the 'seconds'
component of the duration of CIR tests owned by the service test.
secondsUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.11
The value of tmnxOamSathCfgSvcTestDrCirPirMin specifies the 'minutes'
component of the duration of CIR-PIR tests owned by the service test.
minutesUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.12
The value of tmnxOamSathCfgSvcTestDrCirPirSec specifies the 'seconds'
component of the duration of CIR-PIR tests owned by the service test.
secondsUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.13
The value of tmnxOamSathCfgSvcTestDrPoliceMin specifies the 'minutes'
component of the duration of policing tests owned by the service test.
minutesUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.14
The value of tmnxOamSathCfgSvcTestDrPoliceSec specifies the 'seconds'
component of the duration of policing tests owned by the service test.
secondsUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.15
The value of tmnxOamSathCfgSvcTestDrPerfHours specifies the 'hours'
component of the duration of performance tests owned by the service
test.
hoursUnsigned32r/w
Constraints:
range: 0-24
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.16
The value of tmnxOamSathCfgSvcTestDrPerfMin specifies the 'minutes'
component of the duration of performance tests owned by the service
test.
minutesUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.17
The value of tmnxOamSathCfgSvcTestDrPerfSec specifies the 'seconds'
component of the duration of performance tests owned by the service
test.
secondsUnsigned32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.1.3.1.1.18
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2 · 1 row entry · 24 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tmnxOamSathCfgSvcStrmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB::tmnxOamSathCfgSvcStrmTable'
tmnxOamSathCfgSvcStrmTable contains the configuration information for
service streams.
tmnxOamSathCfgSvcStrmEntry row .1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1
tmnxOamSathCfgSvcStrmEntry contains the configuration information for
one service stream.

Rows are created or destroyed using tmnxOamSathCfgSvcStrmRowStatus.
Column Syntax OID
The value of tmnxOamSathCfgSvcStrmNum specifies the number of the
service stream to be configured or read. The service stream
number influences the execution order of tests belonging to the
parent service test.
Unsigned32
Constraints:
range: 1-8
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.1
The value of tmnxOamSathCfgSvcStrmRowStatus specifies the status of
the configuration row for the service stream.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.2
The value of tmnxOamSathCfgSvcStrmLastChanged indicates the most
recent time the value of a settable object in this row was changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.3
The value of tmnxOamSathCfgSvcStrmAdminState specifies the
administrative state of the service stream.

When this value is 'enabled(1)', only the following objects in the row
can be changed:
tmnxOamSat…
TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w
Type Values:
1enabled
2disabled
Description:
The TmnxEnabledDisabledAdminState data type is an enumerated integer
that describes the values used to identify whether an entity is
'enabled' or 'disabled'. It is to be used for admin state leafs.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.4
The value of tmnxOamSathCfgSvcStrmDescription specifies the
descriptive text for the service stream.
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.5
The value of tmnxOamSathCfgSvcStrmCIR specifies whether or not to run
a CIR test for this service stream.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.6
The value of tmnxOamSathCfgSvcStrmCirPir specifies whether or not to
run a CIR-PIR test for this service stream.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.7
The value of tmnxOamSathCfgSvcStrmPolicing specifies whether or not to
run a Policing test for this service stream.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.8
The value of tmnxOamSathCfgSvcStrmPerformance specifies whether or not
to run a Performance test for this service stream.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.9
The value of tmnxOamSathCfgSvcStrmTxCIR specifies the CIR transmit
rate for this service stream.
kilobpsUnsigned32r/w
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.10
The value of tmnxOamSathCfgSvcStrmTxPIR specifies the PIR transmit
rate for this service stream.
kilobpsUnsigned32r/w
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.11
The value of tmnxOamSathCfgSvcStrmDestMacAddr specifies the
destination MAC address for this service stream.

00:00:00:00:00:00 indicates a destination MAC address is not
available.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.12
The value of tmnxOamSathCfgSvcStrmSrcMepId specifies the source
Ethernet Maintenance association End Point (MEP) identifier for this
service stream.

The MEP/domain/association triple
tmnxOamSathCfgSvc…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.13
The value of tmnxOamSathCfgSvcStrmSrcMdIndex specifies the source
Eth-CFM domain for this service stream.

Zero indicates a domain is not available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.14
The value of tmnxOamSathCfgSvcStrmSrcMaIndex specifies the source
Eth-CFM association for this service stream.

Zero indicates an association is not available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.15
The value of tmnxOamSathCfgSvcStrmCustTagPrio specifies the Priority
Code Point (PCP) to be copied into the IEEE 802.1q Customer Tag
(C-Tag) header sent for this service stream.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.16
The value of tmnxOamSathCfgSvcStrmCustTagDEI specifies the Drop
Eligible Indicator (DEI) to be formatted into the IEEE 802.1q Customer
Tag (C-Tag) header sent for this service stream.
Enumerationr/w
Enumerated Values:
1true
2false
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.17
The value of tmnxOamSathCfgSvcStrmSvcTagPrio specifies the Priority
Code Point (PCP) to be copied into the IEEE 802.1q Service Tag (S-Tag)
header sent for this service stream.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.18
The value of tmnxOamSathCfgSvcStrmSvcTagDEI specifies the Drop
Eligible Indicator (DEI) to be formatted into the IEEE 802.1q Service
Tag (S-Tag) header sent for this service stream.
Enumerationr/w
Enumerated Values:
1true
2false
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.19
The value of tmnxOamSathCfgSvcStrmPadPattern specifies the four byte
pattern used (repeatedly) to pad each packet sent by the tests
belonging to this service stream.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.20
The value of tmnxOamSathCfgSvcStrmFrmSizeSeq specifies the sequence of
frame sizes to be sent by the tests belonging to this service stream.

For example, 'aua' specifies the frames sent must cycle
through…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.21
The value of tmnxOamSathCfgSvcStrmFrmSizeTmpl specifies the frame size
template used by this service stream.

The value must match the INDEX of a row in tmnxOamSathCfgFrmSizeTable
(i.e. tmnxOamSathCfgFrmSi…
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..64
Description:
The long name of an item, or an empty string. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
chara…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.22
The value of tmnxOamSathCfgSvcStrmAcpCritTmpl specifies the acceptance
criteria template used by this service stream.

The value must match the INDEX of a row in tmnxOamSathCfgAcpCritTable
(i.e. tmnxOamSat…
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..64
Description:
The long name of an item, or an empty string. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
chara…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.23
The value of tmnxOamSathCfgSvcStrmComplNotif specifies whether or not
to raise a tmnxOamSathSvcStrmCompleted trap when the service stream
completes.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
Description:
The TmnxEnabledDisabled data type is an enumerated integer that
describes the values used to identify whether an entity is 'enabled'
or 'disabled'.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.2.1.24
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3 · 1 row entry · 11 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tmnxOamSathCfgAcpCritTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB::tmnxOamSathCfgAcpCritTable'
tmnxOamSathCfgAcpCritTable contains the configuration information for
Y.1564 acceptance criteria templates.
tmnxOamSathCfgAcpCritEntry row .1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1
tmnxOamSathCfgAcpCritEntry contains the configuration information for
one Y.1564 acceptance criteria template.

Rows are created or destroyed using tmnxOamSathCfgAcpCritRowStatus.

At CPM start u…
Column Syntax OID
The value of tmnxOamSathCfgAcpCritName specifies the name of the
acceptance criteria template to be configured or read.
TIMETRA-TC-MIBTLNamedItem
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 1..64
Description:
The long name of an item. When used as an index to a table, the item
name uniquely identifies the instance. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, u…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.1
The value of tmnxOamSathCfgAcpCritRowStatus specifies the status of
the configuration row for the acceptance criteria template.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.2
The value of tmnxOamSathCfgAcpCritLastChanged indicates the most
recent time the value of a settable object in this row was changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.3
The value of tmnxOamSathCfgAcpCritDescription specifies the
descriptive text for the acceptance criteria template.
TIMETRA-TC-MIBTItemDescriptionr/w
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.4
The value of tmnxOamSathCfgAcpCritThldCIR specifies the threshold for
accepting the measured CIR (mCIR) for a test.

If mCIR >= tmnxOamSathCfgAcpCritThldCIR, the test passed the CIR
criteria.
…
kilobpsUnsigned32r/w
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.5
The value of tmnxOamSathCfgAcpCritThldPIR specifies the threshold for
accepting the measured PIR (mPIR) for a test.

If mPIR >= tmnxOamSathCfgAcpCritThldPIR, the test passed the PIR
criteria.
…
kilobpsUnsigned32r/w
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.6
The value of tmnxOamSathCfgAcpCritThldFLR specifies the
threshold for accepting the measured Frame Loss Ratio
(mFLR) for the following test types:
'cir (1)'
'cirPir (2)'
'performance(4)'.
…
ten-thousandth of a percentInteger32r/w
Constraints:
range: -1-1000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.7
The value of tmnxOamSathCfgAcpCritThldFlrPol specifies the threshold
for accepting the measured Frame Loss Ratio (mFLR) for a 'policing(3)'
test.

If mFLR <= tmnxOamSathCfgAcpCritThldFlrPol, the test passe…
ten-thousandth of a percentInteger32r/w
Constraints:
range: -1-1000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.8
The value of tmnxOamSathCfgAcpCritThldDelay specifies the threshold
for accepting the measured average delay (mDELAY) for a test.

If mDELAY <= tmnxOamSathCfgAcpCritThldDelay, the test passed the delay
cri…
microsecondsUnsigned32r/w
Constraints:
range: 0-100000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.9
The value of tmnxOamSathCfgAcpCritThldDelayVr specifies the threshold
for accepting the measured average delay variation (mDV) for a test.

If mDV <= tmnxOamSathCfgAcpCritThldDelayVr, the test passed the d…
microsecondsUnsigned32r/w
Constraints:
range: 0-100000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.10
The value of tmnxOamSathCfgAcpCritMFactor specifies the throughput
margin for the acceptance criteria template.

Configuring a non-zero margin allows a test to pass when the measured
throughput is less tha…
kilobpsUnsigned32r/w
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.1.3.3.1.11
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4 · 1 row entry · 12 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tmnxOamSathCfgFrmSizeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB::tmnxOamSathCfgFrmSizeTable'
tmnxOamSathCfgFrmSizeTable contains the configuration information for
frame size templates.
tmnxOamSathCfgFrmSizeEntry row .1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1
tmnxOamSathCfgFrmSizeEntry contains the configuration information for
one frame size template.

Rows are created or destroyed using tmnxOamSathCfgFrmSizeRowStatus.

At CPM start up, SROS creates …
Column Syntax OID
The value of tmnxOamSathCfgFrmSizeName specifies the name of the frame
size template to be configured or read.
TIMETRA-TC-MIBTLNamedItem
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 1..64
Description:
The long name of an item. When used as an index to a table, the item
name uniquely identifies the instance. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, u…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.1
The value of tmnxOamSathCfgFrmSizeRowStatus specifies the status of
the configuration row for the frame size template.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.2
The value of tmnxOamSathCfgFrmSizeLastChanged indicates the most
recent time the value of a settable object in this row was changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.3
The value of tmnxOamSathCfgFrmSizeA specifies the Y.1564 frame size
size-a.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.4
The value of tmnxOamSathCfgFrmSizeB specifies the Y.1564 frame size
size-b.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.5
The value of tmnxOamSathCfgFrmSizeC specifies the Y.1564 frame size
size-c.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.6
The value of tmnxOamSathCfgFrmSizeD specifies the Y.1564 frame size
size-d.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.7
The value of tmnxOamSathCfgFrmSizeE specifies the Y.1564 frame size
size-e.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.8
The value of tmnxOamSathCfgFrmSizeF specifies the Y.1564 frame size
size-f.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.9
The value of tmnxOamSathCfgFrmSizeG specifies the Y.1564 frame size
size-g.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.10
The value of tmnxOamSathCfgFrmSizeH specifies the Y.1564 frame size
size-h.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.11
The value of tmnxOamSathCfgFrmSizeU specifies the Y.1564 frame size
size-u.
bytesUnsigned32r/w
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.1.3.4.1.12
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1 · 1 row entry · 18 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tmnxOamSathStsSvcTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB::tmnxOamSathStsSvcTestTable'
tmnxOamSathStsSvcTestTable contains the status information for service
test runs.
tmnxOamSathStsSvcTestEntry row .1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1
tmnxOamSathStsSvcTestEntry contains the status information for one
service test run.
Column Syntax OID
The value of tmnxOamSathStsSvcTestRun specifies the run number of the
service test run to be read.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.1
The value of tmnxOamSathStsSvcTestDescription indicates the value of
tmnxOamSathCfgSvcTestDescription when the run started.
TIMETRA-TC-MIBTItemDescription
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.2
The value of tmnxOamSathStsSvcTestOprState indicates the operational
state of the service test run.

'none(1)' will not be returned.
TmnxOamSathSvcTestRunOprState
Type Values:
1none
2running
3stoppedByUser
4passed
5failed
6stoppedByFault
Description:
An object of type TmnxOamSathSvcTestRunOprState indicates the
operational state of a run for a service test, service stream, or
test.

'stoppedByFault(6)' indicates the service-test was stopped because
a fatal…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.3
The value of tmnxOamSathStsSvcTestTimeStart indicates the start time
of the service test run.

1970/01/01 00:00:00.0 is returned if a start time is not available.
UTCSNMPv2-TCDateAndTime
Constraints:
range: 8-8
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.4
The value of tmnxOamSathStsSvcTestTimeEnd indicates the end time of
the service test run.

1970/01/01 00:00:00.0 is returned if an end time is not available.
UTCSNMPv2-TCDateAndTime
Constraints:
range: 8-8
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.5
The value of tmnxOamSathStsSvcTestAccntPolicy indicates the value of
tmnxOamSathCfgSvcTestAccntPolicy when the run started.
Unsigned32
Constraints:
range: 0-99
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.6
The value of tmnxOamSathStsSvcTestAccntOprSta indicates the
operational status of the transfer of the service-test run's results
to the accounting log.
Enumeration
Enumerated Values:
1none
2readyToSend
3sent
4unableToSend
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.7
The value of tmnxOamSathStsSvcTestComplNotif indicates the value of
tmnxOamSathCfgSvcTestComplNotif when the run started.
TIMETRA-TC-MIBTmnxEnabledDisabled
Type Values:
1enabled
2disabled
Description:
The TmnxEnabledDisabled data type is an enumerated integer that
describes the values used to identify whether an entity is 'enabled'
or 'disabled'.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.8
The value of tmnxOamSathStsSvcTestStrRunOrder indicates the value of
tmnxOamSathCfgSvcTestStrRunOrder when the run started.
TmnxOamSathSvcTestStrRunOrder
Type Values:
1sequential
2parallel
Description:
An object of type TmnxOamSathSvcTestStrRunOrder indicates, for
example, whether or not all the CIR tests belonging to a
service test run in parallel. Similarly, the other test
types.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.9
The value of tmnxOamSathStsSvcTestDrCirMin indicates the value of
tmnxOamSathCfgSvcTestDrCirMin when the run started.
minutesUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.10
The value of tmnxOamSathStsSvcTestDrCirSec indicates the value of
tmnxOamSathCfgSvcTestDrCirSec when the run started.
secondsUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.11
The value of tmnxOamSathStsSvcTestDrCirPirMin indicates the value of
tmnxOamSathCfgSvcTestDrCirPirMin when the run started.
minutesUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.12
The value of tmnxOamSathStsSvcTestDrCirPirSec indicates the value of
tmnxOamSathCfgSvcTestDrCirPirSec when the run started.
secondsUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.13
The value of tmnxOamSathStsSvcTestDrPoliceMin indicates the value of
tmnxOamSathCfgSvcTestDrPoliceMin when the run started.
minutesUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.14
The value of tmnxOamSathStsSvcTestDrPoliceSec indicates the value of
tmnxOamSathCfgSvcTestDrPoliceSec when the run started.
secondsUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.15
The value of tmnxOamSathStsSvcTestDrPerfHours indicates the value of
tmnxOamSathCfgSvcTestDrPerfHours when the run started.
hoursUnsigned32
Constraints:
range: 0-24
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.16
The value of tmnxOamSathStsSvcTestDrPerfMin indicates the value of
tmnxOamSathCfgSvcTestDrPerfMin when the run started.
minutesUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.17
The value of tmnxOamSathStsSvcTestDrPerfSec indicates the value of
tmnxOamSathCfgSvcTestDrPerfSec when the run started.
secondsUnsigned32
Constraints:
range: 0-59
.1.3.6.1.4.1.6527.3.1.2.127.2.2.1.1.18
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2 · 1 row entry · 42 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tmnxOamSathStsSvcStrmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB::tmnxOamSathStsSvcStrmTable'
tmnxOamSathStsSvcStrmTable contains the status information for service
stream runs.
tmnxOamSathStsSvcStrmEntry row .1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1
tmnxOamSathStsSvcStrmEntry contains the status information for one
service stream run.
Column Syntax OID
The value of tmnxOamSathStsSvcStrmOprState indicates the operational
state of the service stream run.

'stoppedByUser(3)' and 'stoppedByFault(6)' will not be returned.
tmnxOamSathStsSvcTestOprState indicat…
TmnxOamSathSvcTestRunOprState
Type Values:
1none
2running
3stoppedByUser
4passed
5failed
6stoppedByFault
Description:
An object of type TmnxOamSathSvcTestRunOprState indicates the
operational state of a run for a service test, service stream, or
test.

'stoppedByFault(6)' indicates the service-test was stopped because
a fatal…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.1
The value of tmnxOamSathStsSvcStrmSrcSAP indicates the Service Access
Point (SAP) which hosts the Eth-CFM MEP, Domain, and Association
configured for the service stream.
TIMETRA-TC-MIBTmnxStrSapId
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..32
Description:
The value of TmnxStrSapId is a printable string which contains the
owner SAP Id or equivalent on a remote system.

The string should contain the printable string equivalent of the
textual conventions TmnxPortI…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.2
The value of tmnxOamSathStsSvcStrmDescription indicates the value of
tmnxOamSathCfgSvcStrmDescription when the run started.
TIMETRA-TC-MIBTItemDescription
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..80
Description:
Description for an item. Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.3
The value of tmnxOamSathStsSvcStrmCIR indicates the value of
tmnxOamSathCfgSvcStrmCIR when the run started.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.4
The value of tmnxOamSathStsSvcStrmCirPir indicates the value of
tmnxOamSathCfgSvcStrmCirPir when the run started.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.5
The value of tmnxOamSathStsSvcStrmPolicing indicates the value of
tmnxOamSathCfgSvcStrmPolicing when the run started.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.6
The value of tmnxOamSathStsSvcStrmPerformance indicates the value of
tmnxOamSathCfgSvcStrmPerformance when the run started.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.7
The value of tmnxOamSathStsSvcStrmTxCIR indicates the value of
tmnxOamSathCfgSvcStrmTxCIR when the run started.
kilobpsUnsigned32
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.8
The value of tmnxOamSathStsSvcStrmTxPIR indicates the value of
tmnxOamSathCfgSvcStrmTxPIR when the run started.
kilobpsUnsigned32
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.9
The value of tmnxOamSathStsSvcStrmSrcMacAddr indicates the source MAC
address for the service stream.

00:00:00:00:00:00 is returned if a source MAC address is not
available.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.10
The value of tmnxOamSathStsSvcStrmDestMacAddr indicates the value of
tmnxOamSathCfgSvcStrmDestMacAddr when the run started.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.11
The value of tmnxOamSathStsSvcStrmSrcMepId indicates the value of
tmnxOamSathCfgSvcStrmSrcMepId when the run started.
IEEE8021-CFM-MIBDot1agCfmMepId
Type Constraints:
range: 1..8191
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.12
The value of tmnxOamSathStsSvcStrmSrcMdIndex indicates the value of
tmnxOamSathCfgSvcStrmSrcMdIndex when the run started.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.13
The value of tmnxOamSathStsSvcStrmSrcMaIndex indicates the value of
tmnxOamSathCfgSvcStrmSrcMaIndex when the run started.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.14
The value of tmnxOamSathStsSvcStrmCustTagPrio indicates the value of
tmnxOamSathCfgSvcStrmCustTagPrio when the run started.
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.15
The value of tmnxOamSathStsSvcStrmCustTagDEI indicates the value of
tmnxOamSathCfgSvcStrmCustTagDEI when the run started.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.16
The value of tmnxOamSathStsSvcStrmSvcTagPrio indicates the value of
tmnxOamSathCfgSvcStrmSvcTagPrio when the run started.
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.17
The value of tmnxOamSathStsSvcStrmSvcTagDEI indicates the value of
tmnxOamSathCfgSvcStrmSvcTagDEI when the run started.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.18
The value of tmnxOamSathStsSvcStrmPadPattern indicates the value of
tmnxOamSathCfgSvcStrmPadPattern when the run started.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.19
The value of tmnxOamSathStsSvcStrmFrmSizeSeq indicates the value of
tmnxOamSathCfgSvcStrmFrmSizeSeq when the run started.
SNMPv2-TCDisplayString
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.20
The value of tmnxOamSathStsSvcStrmFrmSizeTmpl indicates the value of
tmnxOamSathCfgSvcStrmFrmSizeTmpl when the run started.
TIMETRA-TC-MIBTLNamedItem
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 1..64
Description:
The long name of an item. When used as an index to a table, the item
name uniquely identifies the instance. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, u…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.21
The value of tmnxOamSathStsSvcStrmAcpCritTmpl indicates the value of
tmnxOamSathCfgSvcStrmAcpCritTmpl when the run started.
TIMETRA-TC-MIBTLNamedItem
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 1..64
Description:
The long name of an item. When used as an index to a table, the item
name uniquely identifies the instance. When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, u…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.22
The value of tmnxOamSathStsSvcStrmComplNotif indicates the value of
tmnxOamSathCfgSvcStrmComplNotif when the run started.
TIMETRA-TC-MIBTmnxEnabledDisabled
Type Values:
1enabled
2disabled
Description:
The TmnxEnabledDisabled data type is an enumerated integer that
describes the values used to identify whether an entity is 'enabled'
or 'disabled'.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.23
The value of tmnxOamSathStsSvcStrmAcThldCIR indicates the value of
tmnxOamSathCfgAcpCritThldCIR when the run started.
kilobpsUnsigned32
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.24
The value of tmnxOamSathStsSvcStrmAcThldPIR indicates the value of
tmnxOamSathCfgAcpCritThldPIR when the test run started.
kilobpsUnsigned32
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.25
The value of tmnxOamSathStsSvcStrmAcThldFLR indicates the value of
tmnxOamSathCfgAcpCritThldFLR when the test run started.
ten-thousandth of a percentInteger32
Constraints:
range: -1-1000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.26
The value of tmnxOamSathStsSvcStrmAcThldFlrPl indicates the value of
tmnxOamSathCfgAcpCritThldFlrPol when the test run started.
ten-thousandth of a percentInteger32
Constraints:
range: -1-1000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.27
The value of tmnxOamSathStsSvcStrmAcThldDelay indicates the value of
tmnxOamSathCfgAcpCritThldDelay when the test run started.
microsecondsUnsigned32
Constraints:
range: 0-100000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.28
The value of tmnxOamSathStsSvcStrmAcThldDlyVr indicates the value of
tmnxOamSathCfgAcpCritThldDelayVr when the test run started.
microsecondsUnsigned32
Constraints:
range: 0-100000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.29
The value of tmnxOamSathStsSvcStrmAcMFactor indicates the value of
tmnxOamSathCfgAcpCritMFactor when the test run started.
kilobpsUnsigned32
Constraints:
range: 0-400000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.30
The value of tmnxOamSathStsSvcStrmFrmSizeA indicates the value of
tmnxOamSathCfgFrmSizeA when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.31
The value of tmnxOamSathStsSvcStrmFrmSizeB indicates the value of
tmnxOamSathCfgFrmSizeB when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.32
The value of tmnxOamSathStsSvcStrmFrmSizeC indicates the value of
tmnxOamSathCfgFrmSizeC when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.33
The value of tmnxOamSathStsSvcStrmFrmSizeD indicates the value of
tmnxOamSathCfgFrmSizeD when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.34
The value of tmnxOamSathStsSvcStrmFrmSizeE indicates the value of
tmnxOamSathCfgFrmSizeE when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.35
The value of tmnxOamSathStsSvcStrmFrmSizeF indicates the value of
tmnxOamSathCfgFrmSizeF when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.36
The value of tmnxOamSathStsSvcStrmFrmSizeG indicates the value of
tmnxOamSathCfgFrmSizeG when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.37
The value of tmnxOamSathStsSvcStrmFrmSizeH indicates the value of
tmnxOamSathCfgFrmSizeH when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.38
The value of tmnxOamSathStsSvcStrmFrmSizeU indicates the value of
tmnxOamSathCfgFrmSizeU when the test run started.
bytesUnsigned32
Constraints:
range: 64-9212
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.39
The value of tmnxOamSathStsSvcStrmSrcRtrInst indicates the router
which hosts the Eth-CFM MEP, Domain, and Association configured for
the service stream.

The empty string indicates the MEP does not reside…
TIMETRA-TC-MIBTNamedItemOrEmpty
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..32
Description:
The name of an item, or an empty string. When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters,…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.40
The value of tmnxOamSathStsSvcStrmSrcRtrIf indicates the router
interface which hosts the Eth-CFM MEP, Domain, and Association
configured for the service stream.

The empty string indicates the MEP does no…
TIMETRA-TC-MIBTNamedItemOrEmpty
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..32
Description:
The name of an item, or an empty string. When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters,…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.41
The value of tmnxOamSathStsSvcStrmSrcRtrPort indicates the port
configured for the interface which hosts the Eth-CFM MEP, Domain, and
Association configured for the service stream.

The empty string indica…
TIMETRA-TC-MIBTNamedItemOrEmpty
Based On: SNMPv2-TCDisplayString
Type Constraints:
range: 0..32
Description:
The name of an item, or an empty string. When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters,…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.2.1.42
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3 · 1 row entry · 19 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tmnxOamSathStsTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-SERV-ACTIV-TEST-MIB::tmnxOamSathStsTestTable'
tmnxOamSathStsTestTable contains the status information for test runs.
tmnxOamSathStsTestEntry row .1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1
tmnxOamSathStsTestEntry contains the status information for one test
run (e.g. a CIR test run, within a service stream, within a service
test).
Column Syntax OID
The value of tmnxOamSathStsTestType specifies the test type to be
read.
TmnxOamSathTestType
Type Values:
1cir
2cirPir
3policing
4performance
Description:
An object of type TmnxOamSathTestType specifies the type of a
particular test belonging to a service stream.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.1
The value of tmnxOamSathStsTestOprState indicates the operational
state of the test run.

'stoppedByUser(3)' and 'stoppedByFault(6)' will not be returned.
tmnxOamSathStsSvcTestOprState indicates if the ser…
TmnxOamSathSvcTestRunOprState
Type Values:
1none
2running
3stoppedByUser
4passed
5failed
6stoppedByFault
Description:
An object of type TmnxOamSathSvcTestRunOprState indicates the
operational state of a run for a service test, service stream, or
test.

'stoppedByFault(6)' indicates the service-test was stopped because
a fatal…
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.2
The value of tmnxOamSathStsTestTimeStart indicates the start time of
the test run.

1970/01/01 00:00:00.0 is returned if a start time is not available.
UTCSNMPv2-TCDateAndTime
Constraints:
range: 8-8
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.3
The value of tmnxOamSathStsTestTimeEnd indicates the end time of the
test run.

1970/01/01 00:00:00.0 is returned if an end time is not available.
UTCSNMPv2-TCDateAndTime
Constraints:
range: 8-8
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.4
The value of tmnxOamSathStsTestTimeLeft indicates the execution time
remaining for the test run.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.5
The value of tmnxOamSathStsTestOprStThroughpt indicates the test run's
operational status, with respect to the throughput acceptance
criteria.
TmnxOamSathTestOprState
Type Values:
1unknown
2pass
3fail
Description:
An object of type TmnxOamSathTestOprState indicates the operational
state of a test with respect to a particular acceptance criteria.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.6
The value of tmnxOamSathStsTestOprStFLR indicates the test run's
operational status, with respect to the FLR acceptance criteria.
TmnxOamSathTestOprState
Type Values:
1unknown
2pass
3fail
Description:
An object of type TmnxOamSathTestOprState indicates the operational
state of a test with respect to a particular acceptance criteria.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.7
The value of tmnxOamSathStsTestOprStDelay indicates the test run's
operational status, with respect to the delay acceptance criteria.
TmnxOamSathTestOprState
Type Values:
1unknown
2pass
3fail
Description:
An object of type TmnxOamSathTestOprState indicates the operational
state of a test with respect to a particular acceptance criteria.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.8
The value of tmnxOamSathStsTestOprStDelayVar indicates the test run's
operational status, with respect to the delay variation acceptance
criteria.
TmnxOamSathTestOprState
Type Values:
1unknown
2pass
3fail
Description:
An object of type TmnxOamSathTestOprState indicates the operational
state of a test with respect to a particular acceptance criteria.
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.9
The value of tmnxOamSathStsTestMeasDelayMin indicates the minimum
delay measured for the test run.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.10
The value of tmnxOamSathStsTestMeasDelayMax indicates the maximum
delay measured for the test run.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.11
The value of tmnxOamSathStsTestMeasDelayAvg indicates the average
delay measured for the test run.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.12
The value of tmnxOamSathStsTestMeasDelayVrMin indicates the minimum
delay variation measured for the test run.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.13
The value of tmnxOamSathStsTestMeasDelayVrMax indicates the maximum
delay variation measured for the test run.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.14
The value of tmnxOamSathStsTestMeasDelayVrAvg indicates the average
delay variation measured for the test run.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.15
The value of tmnxOamSathStsTestMeasThroughput indicates the measured
throughput for the test run.
kilobpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.16
The value of tmnxOamSathStsTestMeasFLR indicates the measured FLR for
the test run.
ten-thousandth of a percentUnsigned32
Constraints:
range: 0-1000000
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.17
The value of tmnxOamSathStsTestMeasFramesTx indicates the number of
frames transmitted during the test run.
framesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.18
The value of tmnxOamSathStsTestMeasFramesRx indicates the number of
frames received during the test run.
framesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.127.2.2.3.1.19