TIMETRA-LOG-MIB Table View

Defines the Nokia SROS series Log File ID Table for providing, via
SNMP, the capability of defining the characteristics for log and
accounting files and associating them with a file-id. The actual file
is not created until the file-id is used in a log or accounting file
configuration.

tmnxLogFileIdEntry row .1.3.6.1.4.1.6527.3.1.2.12.3.1

Defines an entry in the tmnxLogFileIdTable. Entries are created
and deleted in this table by SNMP sets to tmnxLogFileIdRowStatus.

Indexes

tmnxLogFileId

Column	Syntax	OID
tmnxLogFileId The index value tmnxLogFileId uniquely identifies a file-id to be used when creating a log or accounting file.	TmnxLogFileId Type Constraints: range: 0..99	.1.3.6.1.4.1.6527.3.1.2.12.3.1.1
tmnxLogFileIdRowStatus This object allows entries to be created and deleted in the tmnxLogFileIdTable. Deletion of an entry in this table will not succeed if it is currently used by any log or accounting file.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.3.1.2
tmnxLogFileIdStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.6527.3.1.2.12.3.1.3
tmnxLogFileIdRolloverTime The value of tmnxLogFileIdRolloverTime specifies how often, in minutes, a new log or accounting file will be created. If the value of tmnxLogFileIdLogType is not 'rollover', then the value of this object is irrelevant.	minutesInteger32r/w Constraints: range: 5-10080	.1.3.6.1.4.1.6527.3.1.2.12.3.1.4
tmnxLogFileIdRetainTime The value of tmnxLogFileIdRetainTime specifies the minimum time, in hours, that a file is retained on the media. Once this time period has expired the file is deleted.	hoursInteger32r/w Constraints: range: 1-500	.1.3.6.1.4.1.6527.3.1.2.12.3.1.5
tmnxLogFileIdAdminLocation The value of tmnxLogFileIdAdminLocation specifies where the log or accounting file should be created. The file location should be a compact flash on the primary CPM. When the secondary CPM becomes the primary CPM afte…	TmnxCFlashr/w	.1.3.6.1.4.1.6527.3.1.2.12.3.1.6
tmnxLogFileIdOperLocation The value of tmnxLogFileIdOperLocation indicates where the log or accounting file has been created. The file location should be a compact flash on the primary CPM. When the secondary CPM becomes the primary CPM after …	TmnxCFlash	.1.3.6.1.4.1.6527.3.1.2.12.3.1.7
tmnxLogFileIdDescription The value of tmnxLogFileIdDescription is a user provided description string for this log file-id entry. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.3.1.8
tmnxLogFileIdLogType The value of tmnxLogFileIdLogType indicates the type of information that will be written to this file.	TmnxLogFileType Type Values: 0 none 1 eventLog 2 accountingPolicy	.1.3.6.1.4.1.6527.3.1.2.12.3.1.9
tmnxLogFileIdLogId The value of tmnxLogFileIdLogId indicates the ID index of the log or accounting policy this file is attached to. A value of zero (0) indicates that this file definition is not currently used by any log or accounting po…	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.12.3.1.10
tmnxLogFileIdPathName The value of tmnxLogFileIdPathName is the pathname of the currently opened file used by this file-id entry. The value of tmnxLogFileIdPathName is affected by the value of stiPreferLocalTime.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.12.3.1.11
tmnxLogFileIdCreateTime The value of tmnxLogFileIdCreateTime is the time the currently opened file version used by this file-id entry was created. The value of tmnxLogFileIdCreateTime is affected by the value of stiPreferLocalTime.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.12.3.1.12
tmnxLogFileIdBackupLoc The value of tmnxLogFileIdBackupLoc specifies where the log or accounting file should be created if it cannot be created in the location specified by tmnxLogFileIdAdminLocation. The file location should be a compact fl…	TmnxCFlashr/w	.1.3.6.1.4.1.6527.3.1.2.12.3.1.13

The Nokia SROS series Log Accounting Policy Table contains an entry
for each accounting policy that specifies the characteristics of the
accounting records associated with an accounting policy.

tmnxLogApEntry row .1.3.6.1.4.1.6527.3.1.2.12.4.1

Defines an entry in the tmnxLogApTable. Entries in the
tmnxLogApTable are created and destroyed via SNMP Set
requests to tmnxLogApRowStatus.

Indexes

tmnxLogApPolicyId

Column	Syntax	OID
tmnxLogApPolicyId The value of tmnxLogApPolicyId uniquely identifies an accounting policy to be used for creating accounting records. A specific accounting policy can be applied to one or more service access points (SAPs). Any changes …	Integer32 Constraints: range: 1-99	.1.3.6.1.4.1.6527.3.1.2.12.4.1.1
tmnxLogApRowStatus This object allows entries to be created and deleted in the tmnxLogApTable. Deletion of an entry in this table will not succeed if it is currently applied to any service access point (SAP).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.4.1.2
tmnxLogApStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.	LogStorageTyper/w	.1.3.6.1.4.1.6527.3.1.2.12.4.1.3
tmnxLogApAdminStatus The value of tmnxLogApAdminStatus specifies the desired administrative state for this accounting policy.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.12.4.1.4
tmnxLogApOperStatus The value of tmnxLogApOperStatus indicates the current operational status of this accounting policy.	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.12.4.1.5
tmnxLogApInterval The value of tmnxLogApInterval determines how frequently the statistics are collected and written to their destination. If no record is specified, default value for tmnxLogApInterval is 5 minutes. For ser…	minutesInteger32r/w Constraints: range: 1-120	.1.3.6.1.4.1.6527.3.1.2.12.4.1.6
tmnxLogApDescription The value of tmnxLogApDescription is a user provided description string for this accounting policy. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.4.1.7
tmnxLogApDefault When tmnxLogApDefault has a value of 'true', it specifies that this accounting policy is applied to all service access points (SAPs) that do not have an explicit accounting policy applied. If no accounting policy is as…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.4.1.8
tmnxLogApRecord The value of tmnxLogApRecord specifies the type of predefined accounting record type to be written to the accounting file. The value 'bsxSubscriberAppGroup (22)' was made obsolete in release 7.0 and repla…	Enumerationr/w Enumerated Values: 0 none 1 svcIngressOctet 2 svcEgressOctet 3 svcIngressPkt 4 svcEgressPkt 5 netIngressOctet 6 netEgressOctet 7 netIngressPkt 8 netEgressPkt 9 compactSvcInOctet 10 combinedSvcIngress 11 combinedNetInEgOctet 12 combinedSvcInEgOctet 13 completeSvcInEg 14 combinedSvcSdpInEg 15 completeSvcSdpInEg 16 completeSubscrIngrEgr 17 bsxProtocol 18 bsxApplication 19 bsxAppGroup 20 bsxSubscriberProtocol 21 bsxSubscriberApplication 22 bsxSubscriberAppGroup 23 customRecordSubscriber 24 customRecordService 25 customRecordAa 26 queueGroupOctets 27 queueGroupPackets 28 combinedQueueGroup 29 combinedMplsLspIngress 30 combinedMplsLspEgress 31 combinedLdpLspEgress 32 saa 33 video 34 kpiSystem 35 kpiBearerMgmt 36 kpiBearerTraffic 37 kpiRefPoint 38 kpiPathMgmt 39 kciIom3 40 kciSystem 41 kciBearerMgmt 42 kciPathMgmt 43 completeKpi 44 completeKci 45 kpiBearerGroup 46 kpiRefPathGroup 47 kpiKciBearerMgmt 48 kpiKciPathMgmt 49 kpiKciSystem 50 completeKpiKci 51 aaPerformance 52 completeEthernetPort 53 extendedSvcIngrEgr 54 completeNetIngrEgr 55 aaPartition 56 completeOamPm 57 kpiRefPtSecErrorCauseCode 58 kpiBearerTrafficGtpEndpoint 59 kpiIpReas 60 kpiRadiusGroup 61 kpiRefPtFailureCauseCode 62 kpiDhcpGroup 63 aaAdmitDeny 65 netIntfIngressOctet 66 netIntfEgressOctet 67 netIntfIngressPkt 68 netIntfEgressPkt 69 combinedNetIntfIngress 70 combinedNetIntfEgress 71 completeNetIntfIngrEgr 72 accessEgressOctets 73 accessEgressPackets 74 combinedAccessEgress 75 combinedNetworkEgress	.1.3.6.1.4.1.6527.3.1.2.12.4.1.9
tmnxLogApToFileId The value of tmnxLogApToFileId is the index to the entry in the tmnxLogFileIdTable that specifies the file characteristics to be used for the destination of the accounting policy records collected by this accounting pol…	TmnxLogFileIdr/w Type Constraints: range: 0..99	.1.3.6.1.4.1.6527.3.1.2.12.4.1.10
tmnxLogApPortType The value of tmnxLogApPortType indicates the type of facility associated with the specified accounting policy's record type (i.e. tmnxLogApRecord).	Enumeration Enumerated Values: 0 none 1 access 2 network 3 sdp 4 subscriber 5 appAssure 6 qgrp 7 saa 8 mplsLspIngr 9 mplsLspEgr 10 ldpLspEgr 11 video 12 mobileGateway 13 ethernet 14 oamPm 16 networkIntf 17 accessPort	.1.3.6.1.4.1.6527.3.1.2.12.4.1.11
tmnxLogApDefaultIntervalobsolete When tmnxLogApDefaultInterval has a value of 'true', it specifies that tmnxLogApInterval will have a default value. When tmnxLogApDefaultInterval has a value of 'false', user can set the value of tmnxLogA…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.4.1.12
tmnxLogApDataLossCount The value of tmnxLogApDataLossCount indicates the number of times a tmnxLogAccountingDataLoss trap was raised against this application policy.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.4.1.13
tmnxLogApLastDataLossTimeStamp The value of tmnxLogApLastDataLossTimeStamp indicates the last time, since system startup that a tmnxLogAccountingDataLoss trap was raised against this application policy.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.4.1.14
tmnxLogApToFileType The value of tmnxLogApToFileType specifies where records of an accounting policy are stored. It should be set along with tmnxLogApToFileId which specifies the destination file index where the accounting records are stor…	Enumerationr/w Enumerated Values: 0 fileId 1 noFile	.1.3.6.1.4.1.6527.3.1.2.12.4.1.15
tmnxLogApIncludeSystemInfo The value of tmnxLogApIncludeSystemInfo specifies whether or not to include system information at the top of each accounting file generated for a given accounting policy.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.4.1.16
tmnxLogApAlign If true generation of accounting statistics is aligned with absolute time. First statistics are generated when absolute time is dividable by collection-interval value. After that it continues with collection-interval. T…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.4.1.17

The Nokia SROS series Log Identification Table contains an entry for
each log that specifies the characteristics of that log associated
with a log-id number.

tmnxLogIdEntry row .1.3.6.1.4.1.6527.3.1.2.12.5.1

Defines an entry in the tmnxLogIdTable. Entries in the
tmnxLogIdTable are created and destroyed via SNMP Set
requests to tmnxLogIdRowStatus. Default log entries 99,
and 100 are created by the agent.

Indexes

tmnxLogIdIndex

Column	Syntax	OID
tmnxLogIdIndex The value of tmnxLogIdIndex uniquely identifies an event stream log.	TmnxLogIdIndex Type Constraints: range: 1..101	.1.3.6.1.4.1.6527.3.1.2.12.5.1.1
tmnxLogIdRowStatus This object allows entries to be created and deleted in the tmnxLogIdTable. Deletion of an entry in this table will not succeed if tmnxLogIdOperStatus is not 'outOfService'. tmnxLogIdOperStatus will not transition to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.5.1.2
tmnxLogIdStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.	LogStorageTyper/w	.1.3.6.1.4.1.6527.3.1.2.12.5.1.3
tmnxLogIdAdminStatus The value of tmnxLogIdAdminStatus specifies the desired administrative state for this log.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.12.5.1.4
tmnxLogIdOperStatus The value of tmnxLogIdOperStatus indicates the current operational status of this log.	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.12.5.1.5
tmnxLogIdDescription The value of tmnxLogIdDescription is a user provided description string for this log. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.5.1.6
tmnxLogIdFilterId The value of tmnxLogIdFilterId is the index into the tmnxLogFilterTable to the entry the defines a filter to be applied to this log's source event stream to limit the events output to this log's destination. If tmnxLog…	TmnxLogFilterIdr/w Type Constraints: range: 0..1500	.1.3.6.1.4.1.6527.3.1.2.12.5.1.7
tmnxLogIdSource The value of tmnxLogIdSource is a bit mask that specifies the log event source stream(s) to be forwarded to the destination specified in tmnxLogIdDestination. Events from more than one source may be forwarded to the lo…	Bitsr/w Enumerated Values: 0 main 1 security 2 change 3 debugTrace 4 li	.1.3.6.1.4.1.6527.3.1.2.12.5.1.8
tmnxLogIdDestination The value of tmnxLogIdDestination specifies the event log stream destination. Once this object has been set to a value other than the default 'none' it cannot be modified and attempts to reset it to another value will …	Enumerationr/w Enumerated Values: 0 none 1 console 2 syslog 3 snmpTraps 4 file 5 memory 7 netconf 8 subscribedCli	.1.3.6.1.4.1.6527.3.1.2.12.5.1.9
tmnxLogIdFileId The value of tmnxLogIdFileId is the index to the entry in the tmnxLogFileIdTable that specifies the file characteristics to be used for the destination of the log events written to this log. tmnxLogIdOper…	TmnxLogFileIdr/w Type Constraints: range: 0..99	.1.3.6.1.4.1.6527.3.1.2.12.5.1.10
tmnxLogIdSyslogId The value of tmnxLogIdSyslogId is the index into the tmnxSyslogTargetTable for the row entry with the information to format event messages to be sent to a specific syslog collector target. This object is …	TmnxSyslogIdOrEmptyr/w Type Constraints: range: 0..40	.1.3.6.1.4.1.6527.3.1.2.12.5.1.11
tmnxLogIdMaxMemorySize The value of tmnxLogIdMaxMemorySize specifies the amount of memory to allocate for this log. This object can be set only once together with tmnxLogIdDestination has a value of 'memory', 'netconf', 'snmpTraps' or 'subsc…	eventsUnsigned32r/w Constraints: range: 0-0 range: 50-3000	.1.3.6.1.4.1.6527.3.1.2.12.5.1.12
tmnxLogIdConsoleSessionobsolete This object exists for the convenience of the Nokia SROS CLI. When set to 'true' it indicates that the 'CONSOLE' log output should be printed to the Telnet session instead of the CONSOLE device. When a tmnxLogIdEntry i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.5.1.13
tmnxLogIdForwarded The value of tmnxLogIdForwarded is the count of the number of events that have been forwarded to this log's destination. This counter is incremented after an event has been selected by the log filter defined in tmnxLog…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.12.5.1.14
tmnxLogIdDropped The value of tmnxLogIdDropped is the count of the number of events that have been sent to this logs source(s) and that have not been forwarded to the log destination because they were filtered out by the log filter defi…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.12.5.1.15
tmnxLogIdTimeFormat The value of tmnxLogIdTimeFormat specifies the type of timestamp format for events sent to logs where tmnxLogIdDestination has a value of either 'syslog (2)' or 'file (4)'. When tmnxLogIdTimeFormat has a …	Enumerationr/w Enumerated Values: 1 utc 2 local	.1.3.6.1.4.1.6527.3.1.2.12.5.1.16
tmnxLogIdPythonPolicy The value of tmnxLogIdPythonPolicy specifies the name of a Python policy. The name refers to a conceptual row in the TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable. The Python policy should have Python scripts…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.5.1.17
tmnxLogIdOperDestination The value of tmnxLogIdOperDestination indicates the operational value of event log stream destination. The 'console' destination indicates all selected log events will be directed to the system console. …	Enumeration Enumerated Values: 0 none 1 console 2 syslog 3 snmpTraps 4 file 5 memory 6 cliSession 7 netconf 8 subscribedCli	.1.3.6.1.4.1.6527.3.1.2.12.5.1.18
tmnxLogIdNetconfStream The value of tmnxLogIdNetconfStream specifies the name of the NETCONF stream associated with this log. A non-empty value for this object is only allowed if the value of tmnxLogIdDestination is equal to 'n…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.5.1.19

A table of all log filter match entries for all log filters.

tmnxLogFilterParamsEntry row .1.3.6.1.4.1.6527.3.1.2.12.7.1

Information about a particular Log Filter Parameter entry. Every Log
Filter can have zero or more Log Filter Parameter match entries.

The Log Filter parameter entries are checked in ascending order by
their…

Indexes

tmnxLogFilterId tmnxLogFilterParamsIndex

Column	Syntax	OID
tmnxLogFilterParamsIndex	TmnxLogFilterEntryId Type Constraints: range: 1..999	.1.3.6.1.4.1.6527.3.1.2.12.7.1.1
tmnxLogFilterParamsRowStatus Row Status for this Log filter's parameter entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.7.1.2
tmnxLogFilterParamsDescription The value of tmnxLogFilterParamsDescription is a user provided description string for this log filter match entry. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.7.1.3
tmnxLogFilterParamsAction the action to take for log events that match this filter entry. the value default(3) is allowed. If tmnxLogFilterParamsAction has the value 'default', the action specified by the value of tmnxLogFilterDefaultAction is …	TIMETRA-FILTER-MIBTFilterActionOrDefaultr/w Type Values: 1 drop 2 forward 3 default 4 httpRedirect 5 nat 6 reassemble 7 gtpLclBrkout 8 forwardEsiL2 9 forwardEsiL3 11 unrecognized 30 ignoreMatch	.1.3.6.1.4.1.6527.3.1.2.12.7.1.4
tmnxLogFilterParamsApplication Matches log events with the specified application name. An application is the software entity the reports the log event and includes IP, MPLS, OSPF, CLI, SERVICES, etc.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.7.1.5
tmnxLogFilterParamsApplOperator The value of tmnxLogFilterParamsApplOperator is the comparison operator to use to determine if the log event matches the value of tmnxLogFilterParamsApplication. The only valid values from TmnxLogFilterOperator are 'of…	TmnxLogFilterOperatorr/w Type Values: 1 off 2 equal 3 notEqual 4 lessThan 5 lessThanOrEqual 6 greaterThan 7 greaterThanOrEqual	.1.3.6.1.4.1.6527.3.1.2.12.7.1.6
tmnxLogFilterParamsNumber The value of tmnxLogFilterParamsNumber is the log event number to be matched. Event numbers uniquely identify a certain event within an application but not across applications.	TmnxEventNumberr/w	.1.3.6.1.4.1.6527.3.1.2.12.7.1.7
tmnxLogFilterParamsNumberOperator The value of tmnxLogFilterParamsNumberOperator is the comparison operator to use to determine if the log event matches the value of tmnxLogFilterParamsNumber.	TmnxLogFilterOperatorr/w Type Values: 1 off 2 equal 3 notEqual 4 lessThan 5 lessThanOrEqual 6 greaterThan 7 greaterThanOrEqual	.1.3.6.1.4.1.6527.3.1.2.12.7.1.8
tmnxLogFilterParamsSeverity The value of tmnxLogFilterParamsSeverity is the log event severity level to be matched.	TmnxPerceivedSeverityr/w Type Values: 0 none 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.6527.3.1.2.12.7.1.9
tmnxLogFilterParamsSeverityOperator The value of tmnxLogFilterParamsSeverityOperator is the comparison operator to use to determine if the log event matches the value of tmnxLogFilterParamsSeverity.	TmnxLogFilterOperatorr/w Type Values: 1 off 2 equal 3 notEqual 4 lessThan 5 lessThanOrEqual 6 greaterThan 7 greaterThanOrEqual	.1.3.6.1.4.1.6527.3.1.2.12.7.1.10
tmnxLogFilterParamsSubject The value of tmnxLogFilterParamsSubject is the log event subject string to be matched. The subject is the entity that the event is reported for, such as a port ID.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.7.1.11
tmnxLogFilterParamsSubjectOperator The value of tmnxLogFilterParamsSubjectOperator is the comparison operator to use to determine if the log event matches the value of tmnxLogFilterParamsSubject. The only valid values of TmnxLogFilterOperator to use for…	TmnxLogFilterOperatorr/w Type Values: 1 off 2 equal 3 notEqual 4 lessThan 5 lessThanOrEqual 6 greaterThan 7 greaterThanOrEqual	.1.3.6.1.4.1.6527.3.1.2.12.7.1.12
tmnxLogFilterParamsSubjectRegexp The value of tmnxLogFilterParamsSubjectRegexp specifies the type of string comparison to use to determine if the log event matches the value of tmnxLogFilterParamsSubject. When the value of tmnxLogFilterParamsSubjectRe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.7.1.13
tmnxLogFilterParamsRouter The value of tmnxLogFilterParamsRouter is the log event router context name string to be matched.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.7.1.14
tmnxLogFilterParamsRouterOperator The value of tmnxLogFilterParamsRouterOperator is the comparison operator to use to determine if the log event matches the value of tmnxLogFilterParamsRouter. The only valid values of TmnxLogFilterOperator to use for t…	TmnxLogFilterOperatorr/w Type Values: 1 off 2 equal 3 notEqual 4 lessThan 5 lessThanOrEqual 6 greaterThan 7 greaterThanOrEqual	.1.3.6.1.4.1.6527.3.1.2.12.7.1.15
tmnxLogFilterParamsRouterRegexp The value of tmnxLogFilterParamsRouterRegexp specifies the type of string comparison to use to determine if the log event matches the value of tmnxLogFilterParamsRouter. When the value of tmnxLogFilterParamsRouterRegex…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.7.1.16
tmnxLogFilterParamsMsg The value of tmnxLogFilterParamsMsg specifies the log event message string to be matched. Matching result is determined based on value of tmnxLogFilterParamsMsgOperator. Matching type is determined based on value of tmn…	OctetStringr/w Constraints: range: 0-400	.1.3.6.1.4.1.6527.3.1.2.12.7.1.17
tmnxLogFilterParamsMsgOperator The value of tmnxLogFilterParamsMsgOperator specifies the comparison operator used to determine if the log event matches the value of tmnxLogFilterParamsMsg. The only valid values of tmnxLogFilterParamsMsgOperator to u…	TmnxLogFilterOperatorr/w Type Values: 1 off 2 equal 3 notEqual 4 lessThan 5 lessThanOrEqual 6 greaterThan 7 greaterThanOrEqual	.1.3.6.1.4.1.6527.3.1.2.12.7.1.18
tmnxLogFilterParamsMsgRegexp The value of tmnxLogFilterParamsMsgRegexp specifies the type of string comparison to use to determine if the log event matches the value of tmnxLogFilterParamsMsg. When the value of tmnxLogFilterParamsMsgRegexp is 'tru…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.7.1.19

A table of all remote syslog collectors that this agent is configured
to send syslog messages to.

tmnxSyslogTargetEntry row .1.3.6.1.4.1.6527.3.1.2.12.8.1

Information about a particular Syslog Target entry.

Entries are created by user. Entries are deleted by user.

There is no StorageType object, entries have a presumed StorageType of
nonVolatile.

Indexes

tmnxSyslogTargetIndex

Column	Syntax	OID
tmnxSyslogTargetIndex The value of tmnxSyslogTargetIndex is a unique arbitrary identifier for this syslog collector target. The maximum value of tmnxSyslogTargetIndex is limited to 10 for the Base router context and to 30 for …	TmnxSyslogId Type Constraints: range: 1..40	.1.3.6.1.4.1.6527.3.1.2.12.8.1.1
tmnxSyslogTargetRowStatus The tmnxSyslogTargetRowStatus object allows for dynamic creation and deletion of row entries in the tmnxSyslogTargetTable as well as the activation and deactivation of these entries. When this object's va…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.8.1.2
tmnxSyslogTargetDescription The value of tmnxSyslogTargetDescription is an administratively assigned textual description of this syslog collector target.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.8.1.3
tmnxSyslogTargetAddressobsolete The value of tmnxSyslogTargetAddress is the IPv4 address for this syslog message collector target. If the value of this object is '0.0.0.0', then no messages will be sent, nor will any counters be incremented. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.12.8.1.4
tmnxSyslogTargetUdpPort The value of tmnxSyslogTargetUdpPort is the UDP port number that is used to send messages to this syslog collector target.	TIMETRA-TC-MIBTmnxUdpPortr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.12.8.1.5
tmnxSyslogTargetFacility The value of tmnxSyslogTargetFacility is the syslog facility number that will be encoded in messages sent to this syslog collector target.	TIMETRA-TC-MIBTmnxSyslogFacilityr/w Type Values: 0 kernel 1 user 2 mail 3 systemd 4 auth 5 syslogd 6 printer 7 netnews 8 uucp 9 cron 10 authpriv 11 ftp 12 ntp 13 logaudit 14 logalert 15 cron2 16 local0 17 local1 18 local2 19 local3 20 local4 21 local5 22 local6 23 local7	.1.3.6.1.4.1.6527.3.1.2.12.8.1.6
tmnxSyslogTargetSeverity The value of tmnxSyslogTargetSeverity is the maximum severity level of the messages that SHOULD be forwarded to this syslog collector target. The higher the level, the lower the severity.	TIMETRA-TC-MIBTmnxSyslogSeverityr/w Type Values: 0 emergency 1 alert 2 critical 3 error 4 warning 5 notice 6 info 7 debug	.1.3.6.1.4.1.6527.3.1.2.12.8.1.7
tmnxSyslogTargetMessagePrefix The value of tmnxSyslogTargetMessagePrefix is a string of ABNF alphanumeric characters to be prepended as the MSG TAG to the syslog MSG CONTENT string and separated from it with a colon and space, ': '.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.8.1.8
tmnxSyslogTargetMessagesDropped The value of tmnxSyslogTargetMessagesDropped is a count of messages not sent to this syslog collector target because the severity level of the message was above tmnxSyslogTargetSeverity; the higher the level, the lower …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.8.1.9
tmnxSyslogTargetAddrType The value of tmnxSyslogTargetAddrType specifies the type of host address to be used for the syslog message collector target. This object indicates the type of address stored in the corresponding tmnxSyslogTargetAddr obj…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.12.8.1.10
tmnxSyslogTargetAddr The value of tmnxSyslogTargetAddr specifies the IP host address to be used for the syslog message collector target. If no address is specified, ''H, then no messages will be sent nor will any counters be incremented. …	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16 range: 20-20	.1.3.6.1.4.1.6527.3.1.2.12.8.1.11

A table of all applications that generate TiMOS logger events.

tmnxEventAppEntry row .1.3.6.1.4.1.6527.3.1.2.12.9.1

Information about a particular application entry.

Entries are created by the agent when the system initializes.

There is no StorageType object, entries have a presumed StorageType of
permanent.

Indexes

tmnxEventAppIndex

Column	Syntax	OID
tmnxEventAppIndex The value of tmnxEventAppIndex is a unique arbitrary identifier for this application event generator.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.9.1.1
tmnxEventAppName The value of tmnxEventAppName is the name string that is used in TiMOS log messages as the application that generated the logged event.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.12.9.1.2

A table of all TiMOS events that can be generated.

tmnxEventEntry row .1.3.6.1.4.1.6527.3.1.2.12.10.1

Information about a particular TiMOS event type entry. Entries are
created by the agent when the system initializes. There is no
StorageType object, entries have a presumed StorageType of permanent.

Indexes

tmnxEventAppIndex tmnxEventID

Column	Syntax	OID
tmnxEventID The value of tmnxEventID is a unique arbitrary identifier for indexing event type entries within an event generator application as identified by the value of tmnxEventAppIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.10.1.1
tmnxEventName The value of tmnxEventName is a short name string used to describe this event type.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.12.10.1.2
tmnxEventSeverity The value of tmnxEventSeverity specifies the severity level that will be associated with this type of event when it is generated.	TmnxPerceivedSeverityr/w Type Values: 0 none 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.6527.3.1.2.12.10.1.3
tmnxEventControl The value of tmnxEventControl determines whether or not events of this type will be generated or suppressed. When it has a value of 'true', the event is generated and tmnxEventCounter is incremented. When it has a valu…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.10.1.4
tmnxEventCounter The value of tmnxEventCounter is the number of times an event of this type has been generated.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.10.1.5
tmnxEventDropCount The value of tmnxEventDropCount is the number of times and event of this type has been suppressed because tmnxEventControl is set to 'false'. When tmnxEventControl is set to 'true', tmnxEventDropCount indicates the num…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.10.1.6
tmnxEventReset Setting tmnxEventReset to 'doAction (1)' causes the agent to reset the values of tmnxEventSeverity and tmnxEventControl to the default values for this event type.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.12.10.1.7
tmnxEventThrottle The value of tmnxEventThrottle determines whether or not events of this type will be throttled. When it has a value of 'true', the event is throttled at the rate indicated by the value of tmnxEventThrottleLimit and tmn…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.10.1.8
tmnxEventSpecThrottle The value of tmnxEventSpecThrottle specifies if events of this type will be throttled using the parameters specific for this event. When the value of tmnxEventSpecThrottle is equal to 'true', the event is…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.10.1.9
tmnxEventSpecThrottleLimit The value of tmnxEventSpecThrottleLimit specifies the number of times that this event can be logged within the tmnxEventSpecThrottleIntval. Once this limit has been reached, any additional events of this …	eventsUnsigned32r/w Constraints: range: 0-20000	.1.3.6.1.4.1.6527.3.1.2.12.10.1.10
tmnxEventSpecThrottleIntval The value of tmnxEventSpecThrottleIntval specifies the number of seconds that the event-specific throttling interval lasts. The value must be zero while the value of tmnxEventSpecThrottle is 'false'. …	secondsUnsigned32r/w Constraints: range: 0-1200	.1.3.6.1.4.1.6527.3.1.2.12.10.1.11
tmnxEventSpecThrottleDef The value of tmnxEventSpecThrottleDef indicates the default value of tmnxEventSpecThrottle.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.10.1.12
tmnxEventSpecThrottleLimitDef The value of tmnxEventSpecThrottleLimitDef indicates the default value of the object tmnxEventSpecThrottleLimit. The value zero indicates that there is by default no event-specific throttling for this eve…	eventsUnsigned32 Constraints: range: 0-20000	.1.3.6.1.4.1.6527.3.1.2.12.10.1.13
tmnxEventSpecThrottleIntvalDef The value of tmnxEventSpecThrottleIntvalDef indicates the default value of tmnxEventSpecThrottleIntval. The value zero indicates that there is by default no event-specific throttling for this type of even…	secondsUnsigned32 Constraints: range: 0-1200	.1.3.6.1.4.1.6527.3.1.2.12.10.1.14
tmnxEventRepeat repeat	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.10.1.15

A table of all remote SNMP trap collectors to which this agent is
configured to send SNMP notifications messages.
          
This table was made obsolete in the 5.0 release and is replaced with
tmnxSnmpTrapDestTable.

tmnxSnmpTrapGroupEntry row .1.3.6.1.4.1.6527.3.1.2.12.11.1

Information about a particular SNMP trap destination entry. The first
index instance creates and snmp trap group to be associated with the
event log with the same value for tmnxLogIdIndex. The second and third
indexes s…

Indexes

tmnxStgIndex tmnxStgDestAddress tmnxStgDestPort

Column	Syntax	OID
tmnxStgIndexobsolete The value of tmnxStgIndex specifies an snmp trap group to be associated with the event log with the same value for tmnxLogIdIndex. This object was made obsolete in the 5.0 release. It is replaced by tmnx…	TmnxStgIndex Type Constraints: range: 1..100	.1.3.6.1.4.1.6527.3.1.2.12.11.1.1
tmnxStgDestAddressobsolete The value of tmnxStgDestAddress is the IPv4 address for this remote snmp notification destination. If the value of this object is '0.0.0.0', then no messages will be sent, nor will any counters be incremented. …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.12.11.1.2
tmnxStgDestPortobsolete The value of tmnxStgDestPort is the UDP port number that is used to send messages to this remote SNMP notification destination. This object was made obsolete in the 5.0 release. It is replaced by tmnxStd…	TIMETRA-TC-MIBTmnxUdpPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.12.11.1.3
tmnxStgRowStatusobsolete The tmnxStgRowStatus object allows for dynamic creation and deletion of row entries in the tmnxSnmpTrapGroupTable as well as the activation and deactivation of these entries. When this object's value is s…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.11.1.4
tmnxStgDescriptionobsolete The value of tmnxStgDescription is an administratively assigned textual description of this snmp trap destination. This object was made obsolete in the 5.0 release. It is replaced by tmnxStdDescription.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.11.1.5
tmnxStgVersionobsolete The value of tmnxStgVersion specifies the SNMP version that will be used to format notification messages sent to this snmp trap destination. The values supported by the Nokia SROS series SNMP agent are: …	SNMP-FRAMEWORK-MIBSnmpMessageProcessingModelr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.12.11.1.6
tmnxStgNotifyCommunityobsolete The value of tmnxStgNotifyCommunity specifies the SNMPv1 or SNMPv2c community name string or the SNMPv3 security name used when an SNMP notification message is sent to this trap destination. If the value of this object…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.12.11.1.7
tmnxStgSecurityLevelobsolete The value of tmnxStgSecurityLevel specifies the level of security at which SNMP notification messages will be sent to the SNMP trap destination when tmnxStgVersion has a value of '3' for SNMPv3. This obje…	SNMP-FRAMEWORK-MIBSnmpSecurityLevelr/w Type Values: 1 noAuthNoPriv 2 authNoPriv 3 authPriv	.1.3.6.1.4.1.6527.3.1.2.12.11.1.8

A table of recent SNMP SET failures.  Only the SET errs from
remote SNMP manager requests are saved in this table.  Only
SET errs detected by the SNMP engine in the test phase
consistency check method functions are saved.  SET errors that
are caught by the preliminary access and ASN.1 decoding phase
are not saved.  These are errs such as noAccess, notWritable,
wrongType, wrongLength and wrongEncoding.  Note that notWritable,
wrongType, and wrongLength errs may sometimes be generated by
the consistency check; in this case they will be saved in this
table.
          
SET errs caused by local CLI sessions are not saved.
          
The tmnxSnmpSetErrsTable is intended to provide an aide to
Network Management Systems (NMS) developers.  When an SNMP SET
fails during the consistency checking test phase, this table may
provide more detailed failure reason information than the simple
SNMP error code value in the SNMP response PDU.

tmnxSnmpSetErrsEntry row .1.3.6.1.4.1.6527.3.1.2.12.16.1

Information about a particular SNMP SET error. The first two
index instances identify the SNMP manager who sent the SNMP SET
request that failed. The third index specifies the SNMP request ID
(sequence number) of the …

Indexes

tmnxSseAddressType tmnxSseAddress tmnxSseSnmpPort tmnxSseRequestId

Column	Syntax	OID
tmnxSseAddressType The value of tmnxSseAddressType indicates the IP address type of address specified in tmnxSseAddress. 'ipv4' and 'ipv6' are the only address type values supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.12.16.1.1
tmnxSseAddress The value of tmnxSseAddress is the IP address of the SNMP manager that sent the SNMP SET request that failed for this error reason.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.12.16.1.2
tmnxSseSnmpPort The value of tmnxSseSnmpPort is the UDP port number of the SNMP manager that sent the SNMP SET request that failed for this error reason.	TIMETRA-TC-MIBTmnxUdpPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.12.16.1.3
tmnxSseRequestId The value of tmnxSseRequestId indicates the request ID of the SNMP SNMP SET request that failed for this error reason.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.16.1.4
tmnxSseVersion The value of tmnxSseVersion indicates the SNMP version of the SNMP SET request that failed. The values supported by the Nokia SROS series SNMP agent are: 0 for SNMPv1 1 for…	SNMP-FRAMEWORK-MIBSnmpMessageProcessingModel Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.12.16.1.5
tmnxSseSeverityLevel The value of tmnxSseSeverityLevel indicates severity level that is associated with this type SNMP SET error.	TmnxPerceivedSeverity Type Values: 0 none 1 cleared 2 indeterminate 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.6527.3.1.2.12.16.1.6
tmnxSseModuleId The value of tmnxSseModuleId indicates a unique arbitrary identified for the TiMOS application module that generated this SNMP SET error. NOTE: This is NOT the same value used for tmnxEventAppIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.16.1.7
tmnxSseModuleName The value of tmnxSseModuleName indicates the name string of the TiMOS application module that generated this SNMP SET error. NOTE: This is NOT the same value used for tmnxEventAppName.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.12.16.1.8
tmnxSseErrorCode The value of tmnxSseErrorCode indicates the error number associated with this SNMP SET error. The error numbers are unique within a tmnxSseModuleId. They are not unique across all modules so both the module name and e…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.16.1.9
tmnxSseErrorName The value of tmnxSseErrorName indicates the error name associated with this SNMP SET error. The error names are unique within a tmnxSseModuleId. They are not unique across all modules so both the module name and error…	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.6527.3.1.2.12.16.1.10
tmnxSseErrorMsg The value of tmnxSseErrorMsg indicates the fixed error message text associated with this SNMP SET error identified by the values of tmnxSseModuleId and tmnxSseErrorCode.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.6527.3.1.2.12.16.1.11
tmnxSseExtraText The value of tmnxSseExtraText indicates the fixed run-time variable message text associated with this SNMP SET error identified by the values of tmnxSseModuleId and tmnxSseErrorCode. If the extra text was truncated to …	OctetString Constraints: range: 0-320	.1.3.6.1.4.1.6527.3.1.2.12.16.1.12
tmnxSseTimestamp The value of tmnxSseTimestamp indicates the sysUpTime value when this tmnxSnmpSetErrsEntry was created by the agent.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.16.1.13

A table of all remote SNMP trap logs to which this agent is configured
to send SNMP notifications messages.

tmnxSnmpTrapLogEntry row .1.3.6.1.4.1.6527.3.1.2.12.17.1

Each row entry in the tmnxSnmpTrapLogTable represents additional
columns for attributes specific to the Nokia SROS series
implementation of SNMP-NOTIFICATION-MIB::snmpNotifyTable.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxSnmpTrapLogDescription The value of tmnxSnmpTrapLogDescription is an administratively assigned textual description of this snmp trap log.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.17.1.1

A table of all remote SNMP IPv4/v6 trap collectors to which this agent
is configured to send SNMP notification messages.

tmnxSnmpTrapDestEntry row .1.3.6.1.4.1.6527.3.1.2.12.18.1

Information about a particular SNMP notification destination entry.
The first index instance creates an snmp notification group to be
associated with the event log with the same value for tmnxLogIdIndex.
The second inde…

Indexes

tmnxStdIndex tmnxStdName

Column	Syntax	OID
tmnxStdIndex The value of tmnxStdIndex specifies an snmp notification group to be associated with the event log with the same value for tmnxLogIdIndex.	TmnxStgIndex Type Constraints: range: 1..100	.1.3.6.1.4.1.6527.3.1.2.12.18.1.1
tmnxStdName The value of tmnxStdName specifies the name of an snmp notification destination within the snmp notification group specified by tmnxLogIdIndex.	OctetString Constraints: range: 1-28	.1.3.6.1.4.1.6527.3.1.2.12.18.1.2
tmnxStdRowStatus The tmnxStdRowStatus object allows for dynamic creation and deletion of row entries in the tmnxSnmpTrapDestTable as well as the activation and deactivation of these entries. In order for 'createAndGo' row…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.18.1.3
tmnxStdRowLastChanged The value of tmnxStdRowLastChanged indicates the sysUpTime when the value of a writable object in this row entry was modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.18.1.4
tmnxStdDestAddrType The value of tmnxStdDestAddrType specifies the type of host address to be used for the remote SNMP notification collector. This object indicates the type of address stored in the corresponding tmnxStdDestAddr object. …	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.12.18.1.5
tmnxStdDestAddr The value of tmnxStdDestAddr specifies the IP host address to be used for the remote SNMP notification collector. The SNMP notification collector IP address type is determined by the value of the correspo…	OctetStringr/w Constraints: range: 20-20 range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.12.18.1.6
tmnxStdDestPort The value of tmnxStdDestPort is the UDP port number that is used to send messages to this remote SNMP notification collector.	TIMETRA-TC-MIBTmnxUdpPortr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.12.18.1.7
tmnxStdDescription The value of tmnxStdDescription is an administratively assigned textual description of this SNMP notification collector.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.18.1.8
tmnxStdVersion The value of tmnxStdVersion specifies the SNMP version that will be used to format notification messages sent to this SNMP notification collector. The values supported by the Nokia SROS series SNMP agent …	SNMP-FRAMEWORK-MIBSnmpMessageProcessingModelr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.12.18.1.9
tmnxStdNotifyCommunity The value of tmnxStdNotifyCommunity specifies the SNMPv1 or SNMPv2c community name string or the SNMPv3 security name used when an SNMP notification message is sent to this SNMP notification collector. If the value of …	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.6527.3.1.2.12.18.1.10
tmnxStdSecurityLevel The value of tmnxStdSecurityLevel specifies the level of security at which SNMP notification messages will be sent to the SNMP notification collector when tmnxStdVersion has a value of '3' for SNMPv3.	SNMP-FRAMEWORK-MIBSnmpSecurityLevelr/w Type Values: 1 noAuthNoPriv 2 authNoPriv 3 authPriv	.1.3.6.1.4.1.6527.3.1.2.12.18.1.11
tmnxStdReplay The value of tmnxStdReplay specifies whether or not to resend notifications that were generated while this notification destination did not have a route installed for it in the route tables.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.12.18.1.12
tmnxStdReplayStart The value of tmnxStdReplayStart indicates the SNMP notification request ID of the first event that could not be generated because there is no route to this notification target address. Events will be rese…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.18.1.13
tmnxStdReplayLastTime The value of tmnxStdReplayLastTime indicates the sysUpTime when missed events were last replayed to this SNMP notification target address. A value of 0 indicates that no missed events have been replayed to this SNMP no…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.18.1.14

The Nokia SROS series tmnxLogApCustRecordTable augments
tmnxLogApTable. The table allows to configure the layout and setting
for a custom accounting record associated with this accounting policy.

tmnxLogApCustRecordEntry row .1.3.6.1.4.1.6527.3.1.2.12.20.1

Defines an entry in the tmnxLogApCustRecordTable. Entries in this
table are created and destroyed via SNMP Set requests to the
tmnxLogApRowStatus object of the tmnxLogApTable.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxLogApCrLastChanged The value of tmnxLogApCrLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since the box was last initialized.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.20.1.1
tmnxLogApCrSignChangeDelta The value of tmnxLogApCrSignChangeDelta specifies the delta change (significant change) that is required for the custom record to be written to the xml file.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.20.1.2
tmnxLogApCrSignChangeQueue The value of tmnxLogApCrSignChangeQueue specifies the reference queue to which the significant change defined in tmnxLogApCrSignChangeDelta applies.	TIMETRA-TC-MIBTQueueIdOrAllr/w Type Constraints: range: -1..32	.1.3.6.1.4.1.6527.3.1.2.12.20.1.3
tmnxLogApCrSignChangeOCntr The value of tmnxLogApCrSignChangeOCntr specifies the counter-id that will be taken as reference to which the significant change defined in tmnxLogApCrSignChangeDelta applies.	TIMETRA-TC-MIBTHsmdaCounterIdOrZeroOrAllr/w Type Constraints: range: -1..8	.1.3.6.1.4.1.6527.3.1.2.12.20.1.4
tmnxLogApCrSignChangeQICounters The value of tmnxLogApCrSignChangeQICounters specifies the ingress counter Ids in the queue defined by tmnxLogApCrSignChangeQueue to be taken as reference to which the significant change defined in tmnxLogApCrSignChange…	TIMETRA-TC-MIBTmnxAccPlcyQICountersr/w Type Values: 0 hpo 1 lpo 2 ucp 3 hoo 4 loo 5 uco 6 apo 7 aoo 8 hpd 9 lpd 10 hod 11 lod 12 ipf 13 opf 14 iof 15 oof	.1.3.6.1.4.1.6527.3.1.2.12.20.1.5
tmnxLogApCrSignChangeQECounters The value of tmnxLogApCrSignChangeQECounters specifies the egress counter Ids in the queue defined by tmnxLogApCrSignChangeQueue to be taken as reference to which the significant change defined in tmnxLogApCrSignChangeD…	TIMETRA-TC-MIBTmnxAccPlcyQECountersr/w Type Values: 0 ipf 1 ipd 2 opf 3 opd 4 iof 5 iod 6 oof 7 ood	.1.3.6.1.4.1.6527.3.1.2.12.20.1.6
tmnxLogApCrSignChangeOICounters The value of tmnxLogApCrSignChangeOICounters specifies the ingress counter Ids in the counter-group defined by tmnxLogApCrSignChangeOCntr to be taken as reference to which the significant change defined in tmnxLogApCrSi…	TIMETRA-TC-MIBTmnxAccPlcyOICountersr/w Type Values: 0 apo 1 aoo 2 hpd 3 lpd 4 hod 5 lod 6 ipf 7 opf 8 iof 9 oof	.1.3.6.1.4.1.6527.3.1.2.12.20.1.7
tmnxLogApCrSignChangeOECounters The value of tmnxLogApCrSignChangeOECounters specifies the egress counter Ids in the counter-group defined by tmnxLogApCrSignChangeOCntr to be taken as reference to which the significant change defined in tmnxLogApCrSig…	TIMETRA-TC-MIBTmnxAccPlcyOECountersr/w Type Values: 0 ipf 1 ipd 2 opf 3 opd 4 iof 5 iod 6 oof 7 ood	.1.3.6.1.4.1.6527.3.1.2.12.20.1.8
tmnxLogApCrSignChangeAACounters The value of tmnxLogApCrSignChangeAACounters specifies the AA (Application assurance) counter Ids to be taken as reference to which the significant change defined in tmnxLogApCrSignChangeDelta applies. A…	TIMETRA-TC-MIBTmnxAccPlcyAACountersr/w Type Values: 0 any 1 sfa 2 nfa 3 sfd 4 nfd 5 saf 6 naf 7 spa 8 npa 9 sba 10 nba 11 spd 12 npd 13 sbd 14 nbd 15 sdf 16 mdf 17 ldf 18 tfd 19 tfc 20 sbm 21 spm 22 smt 23 nbm 24 npm 25 nmt 26 sfc 27 nfc	.1.3.6.1.4.1.6527.3.1.2.12.20.1.9
tmnxLogApCrAACounters The value of tmnxLogApCrAACounters specifies the list of AA (Application Assurance) counters that need to be collected in this custom record.	TIMETRA-TC-MIBTmnxAccPlcyAACountersr/w Type Values: 0 any 1 sfa 2 nfa 3 sfd 4 nfd 5 saf 6 naf 7 spa 8 npa 9 sba 10 nba 11 spd 12 npd 13 sbd 14 nbd 15 sdf 16 mdf 17 ldf 18 tfd 19 tfc 20 sbm 21 spm 22 smt 23 nbm 24 npm 25 nmt 26 sfc 27 nfc	.1.3.6.1.4.1.6527.3.1.2.12.20.1.10
tmnxLogApCrAASubAttributes The value of tmnxLogApCrAASubAttributes specifies the list of AA (Application Assurance) subscriber attributes that must be included in this custom record.	TIMETRA-TC-MIBTmnxAccPlcyAASubAttributesr/w Type Values: 0 appProfile 1 appServiceOption	.1.3.6.1.4.1.6527.3.1.2.12.20.1.11
tmnxLogApCrSignChangePolicer The value of tmnxLogApCrSignChangePolicer specifies the reference policer to which the significant change defined in tmnxLogApCrSignChangeDelta applies. A value of zero means that the significant change d…	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.6527.3.1.2.12.20.1.12
tmnxLogApCrSignChangePICounters The value of tmnxLogApCrSignChangePICounters specifies the ingress counters in the policer defined by tmnxLogApCrSignChangePolicer to which the significant change defined in tmnxLogApCrSignChangeDelta applies. …	TIMETRA-TC-MIBTmnxAccPlcyPolicerICountersr/w Type Values: 0 ipo 1 ipd 2 opo 3 opd 4 ioo 5 iod 6 ooo 7 ood 8 ucp 9 uco 10 ipf 11 iof 12 opf 13 oof	.1.3.6.1.4.1.6527.3.1.2.12.20.1.13
tmnxLogApCrSignChangePECounters The value of tmnxLogApCrSignChangePECounters specifies the egress counters in the policer defined by tmnxLogApCrSignChangePolicer to which the significant change defined in tmnxLogApCrSignChangeDelta applies. …	TIMETRA-TC-MIBTmnxAccPlcyPolicerECountersr/w Type Values: 0 ipo 1 ipd 2 opo 3 opd 4 ioo 5 iod 6 ooo 7 ood 8 ucp 9 uco 10 ipf 11 iof 12 opf 13 oof 14 xpo 15 xpd 16 xpf 17 xoo 18 xod 19 xof 20 ppo 21 ppd 22 ppf 23 poo 24 pod 25 pof	.1.3.6.1.4.1.6527.3.1.2.12.20.1.14

The Nokia SROS series tmnxLogApCustRecordQueueTable allows to create
custom record queue information for a given accounting policy. Rows
can only be created for existing accounting policies (as defined in
tmnxLogApTable).

tmnxLogApCustRecordQueueEntry row .1.3.6.1.4.1.6527.3.1.2.12.21.1

Defines an entry in the tmnxLogApCustRecordQueueTable. Entries in this
table are created and destroyed via SNMP Set requests.

Indexes

tmnxLogApPolicyId tmnxLogApCrQueueId

Column	Syntax	OID
tmnxLogApCrQueueId The value of tmnxLogApCrQueueId specifies the queue ID for which counters will be collected in this custom record. The counters that will be collected are defined in tmnxLogApCrQueueICounters and tmnxLogApCrQueueECounte…	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.6527.3.1.2.12.21.1.1
tmnxLogApCrQueueRowStatus Row Status of the entry. This allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.21.1.2
tmnxLogApCrQueueLastChanged The value of tmnxLogApCrQueueLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.21.1.3
tmnxLogApCrQueueICounters The value of tmnxLogApCrQueueICounters specifies the list of ingress counters that need to be collected in this custom record. At least one of the objects tmnxLogApCrQueueICounters or tmnxLogApCrQueueECou…	TIMETRA-TC-MIBTmnxAccPlcyQICountersr/w Type Values: 0 hpo 1 lpo 2 ucp 3 hoo 4 loo 5 uco 6 apo 7 aoo 8 hpd 9 lpd 10 hod 11 lod 12 ipf 13 opf 14 iof 15 oof	.1.3.6.1.4.1.6527.3.1.2.12.21.1.4
tmnxLogApCrQueueECounters The value of tmnxLogApCrQueueECounters specifies the list of egress counters that need to be collected in this custom record. At least one of the objects tmnxLogApCrQueueICounters or tmnxLogApCrQueueECoun…	TIMETRA-TC-MIBTmnxAccPlcyQECountersr/w Type Values: 0 ipf 1 ipd 2 opf 3 opd 4 iof 5 iod 6 oof 7 ood	.1.3.6.1.4.1.6527.3.1.2.12.21.1.5

The Nokia SROS series tmnxLogApCrOverrideCntrTable allows to create
custom record counter override information for a given accounting
policy.
          
Rows can only be created for existing accounting policies (as defined
in tmnxLogApTable).

tmnxLogApCrOverrideCntrEntry row .1.3.6.1.4.1.6527.3.1.2.12.22.1

Defines an entry in the tmnxLogApCrOverrideCntrTable. Entries in this
table are created and destroyed via SNMP Set requests.

Indexes

tmnxLogApPolicyId tmnxLogApCrOverrideCntrId

Column	Syntax	OID
tmnxLogApCrOverrideCntrId The value of tmnxLogApCrOverrideCntrId specifies the counter group for which counters will be collected in this custom record. The counters that will be collected are defined in tmnxLogApCrOverrideCntrICounters and tmnx…	Unsigned32 Constraints: range: 1-8	.1.3.6.1.4.1.6527.3.1.2.12.22.1.1
tmnxLogApCrOverrideCntrRowStatus Row Status of the entry. This allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.22.1.2
tmnxLogApCrOverrideCntrLastChngd The value of tmnxLogApCrOverrideCntrLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.22.1.3
tmnxLogApCrOverrideCntrICounters The value of tmnxLogApCrOverrideCntrICounters specifies the list of ingress counters that need to be collected in this custom record. At least one of the objects tmnxLogApCrOverrideCntrICounters or tmnxLo…	TIMETRA-TC-MIBTmnxAccPlcyOICountersr/w Type Values: 0 apo 1 aoo 2 hpd 3 lpd 4 hod 5 lod 6 ipf 7 opf 8 iof 9 oof	.1.3.6.1.4.1.6527.3.1.2.12.22.1.4
tmnxLogApCrOverrideCntrECounters The value of tmnxLogApCrOverrideCntrECounters specifies the list of egress counters that need to be collected in this custom record. At least one of the objects tmnxLogApCrOverrideCntrICounters or tmnxLog…	TIMETRA-TC-MIBTmnxAccPlcyOECountersr/w Type Values: 0 ipf 1 ipd 2 opf 3 opd 4 iof 5 iod 6 oof 7 ood	.1.3.6.1.4.1.6527.3.1.2.12.22.1.5

The Nokia SROS series tmnxLogExecRollbackOpTable provides a history of
up to the last number of 'exec', 'load', rollback revert, and 'vsd'
operations specified by the value of tmnxLogExRbkOpMaxEntries.
          
The tmnxLogExecRollbackOpTable is intended to provide an aide to
Network Management Systems (NMS). The 'exec' or 'load' of a large
configuration file via the system's CLI, a large rollback revert
operation, or execution of 'vsd' configuration messages will generate
so many configuration change and other events in a short time that
neither the SROS's event logging utility nor the NMS can keep up with
them. This results in the SROS and/or NMS dropping events and requires
the NMS to perform a costly resynchronization of its management
database.

tmnxLogExecRollbackOpEntry row .1.3.6.1.4.1.6527.3.1.2.12.26.3.1

Defines a row entry in the tmnxLogExecRollbackOpTable. Entries in this
table are created and deleted by the agent.

Indexes

tmnxLogExRbkOpIndex

Column	Syntax	OID
tmnxLogExRbkOpIndex The value of tmnxLogExRbkOpIndex is a unique value that indicates an instance of an exec, load, rollback revert, or vsd operation. Only the most recent instances are kept in this table. The maximum number of row entries…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.1
tmnxLogExRbkOpLastChanged The value of tmnxLogExRbkOpLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.2
tmnxLogExRbkOpType The value of tmnxLogExRbkOpType indicates the type of operation this row entry represents.	TmnxLogExRbkOperationType Type Values: 0 unknown 1 exec 2 rollback 3 vsd 4 load	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.3
tmnxLogExRbkOpStatus The value of tmnxLogExRbkOpStatus indicates the status of this exec, load, rollback revert, or vsd operation.	Enumeration Enumerated Values: 0 unknown 1 inProgress 2 success 3 failed	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.4
tmnxLogExRbkOpBegin The value of tmnxLogExRbkOpBegin indicates the sysUpTime when the exec, load, rollback revert, or vsd operation began.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.5
tmnxLogExRbkOpEnd The value of tmnxLogExRbkOpEnd indicates the sysUpTime when the exec, load, rollback revert, or vsd operation ended. A value of zero (0) means that the operation has not completed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.6
tmnxLogExRbkOpFile The value of tmnxLogExRbkOpFile indicates the location and name of the file used for the exec, load or rollback revert operation, otherwise the value of this object is an empty string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.7
tmnxLogExRbkOpUser The value of tmnxLogExRbkOpUser indicates the user who initiated the exec or rollback revert operation.	TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.8
tmnxLogExRbkOpNumEvents The value of tmnxLogExRbkOpNumEvents indicates the number of row entries in the associated tmnxLogExecRollbackEventTable for this exec, load, rollback revert, or vsd operation. It is updated only when the exec, load, ro…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.26.3.1.9

The Nokia SROS series tmnxLogExecRollbackEventTable provides a history
of mib tables modified or specific events generated during an exec,
load, rollback revert, or vsd operation.

tmnxLogExecRollbackEventEntry row .1.3.6.1.4.1.6527.3.1.2.12.26.4.1

Defines a row entry in the tmnxLogExecRollbackEventTable. Each row
entry represents either an SNMP table that has been modified or a
specific event generated during an exec, load, rollback revert, or vsd
operation. Entr…

Indexes

tmnxLogExRbkOpIndex tmnxLogExRbkEventIndex

Column	Syntax	OID
tmnxLogExRbkEventIndex The value of tmnxLogExRbkEventIndex is a unique value that indicates an instance of an event generated during an exec, load, rollback revert, or vsd operation.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.26.4.1.1
tmnxLogExRbkEventOID The value of tmnxLogExRbkEventOID indicates the object identifier of either a mib table for which a generic change event was generated or the notification object identifier of a specific event notification generated dur…	ObjectIdentifier	.1.3.6.1.4.1.6527.3.1.2.12.26.4.1.2

The tmnxEhsHandlerTable contains a list of Event Handlers used by the
Event Handling System (EHS) Event Triggers.

tmnxEhsHandlerEntry row .1.3.6.1.4.1.6527.3.1.2.12.29.2.1

Defines a row entry in the tmnxEhsHandlerTable. Each entry
contains information about a specific Event Handling System (EHS)
Event Handler.

Rows are created and deleted via SNMP SET operations using
tmnxEh…

Indexes

tmnxEhsHandlerName

Column	Syntax	OID
tmnxEhsHandlerName The value of tmnxEhsHandlerName specifies the name of an Event Handling System (EHS) Event Handler represented by this row in the tmnxEhsHandlerTable.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.12.29.2.1.1
tmnxEhsHandlerRowStatus The value of tmnxEhsHandlerRowStatus specifies the row status. It allows rows to be created and deleted in the tmnxEhsHandlerTable. If any associated rows exist in the tmnxEhsHEntryTable, 'destroy' will …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.29.2.1.2
tmnxEhsHandlerDescription The value of tmnxEhsHandlerDescription specifies a user provided description string for an EHS Handler. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.29.2.1.3
tmnxEhsHandlerLastChange The value of tmnxEhsHandlerLastChange indicates the time this row entry was last changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.29.2.1.4
tmnxEhsHandlerAdminStatus The value of tmnxEhsHandlerAdminStatus specifies the administrative state of the EHS Event Handler.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.12.29.2.1.5
tmnxEhsHandlerOperStatus The value of tmnxEhsHandlerOperStatus indicates the operational state of the EHS Event Handler.	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.12.29.2.1.6

The tmnxEhsHandlerStatsTable contains operational data for Event
handlers used by the EHS Event Triggers.

tmnxEhsHandlerStatsEntry row .1.3.6.1.4.1.6527.3.1.2.12.29.3.1

Defines a row in the tmnxEhsHandlerStatsTable. Each row contains
operational information about a specific EHS Event Handler.

Rows are created and deleted by the system as rows are created and
deleted in the…

Indexes

No indexes recorded

Column	Syntax	OID
tmnxEhsHandlerStatsSuccess The value of tmnxEhsHandlerStatsSuccess indicates the number of times the EHS system triggers a handler, which can take corresponding action specified in handler's entries	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.3.1.1
tmnxEhsHandlerStatsErrNoEntry The value of tmnxEhsHandlerStatsErrNoEntry indicates the number of times the EHS system triggers a handler, which can not take corresponding action as there is no handler's entry specifying an operation to perform.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.3.1.2
tmnxEhsHandlerStatsErrAdmStatus The value of tmnxEhsHandlerStatsErrAdmStatus indicates the number of times the EHS system triggers a handler, which can not take corresponding action due to admin state of the handler. The handler may be …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.3.1.3

The tmnxEhsHEntryTable contains a list of Event Handler Entries in an
EHS Event Handler.

tmnxEhsHEntryEntry row .1.3.6.1.4.1.6527.3.1.2.12.29.4.1

Defines a row in the tmnxEhsHEntryTable. Each row
contains information about a specific Handler Entry.

Rows are created and deleted via SNMP SET operations using
tmnxEhsHEntryRowStatus.

Indexes

tmnxEhsHandlerName tmnxEhsHEntryId

Column	Syntax	OID
tmnxEhsHEntryId The value of tmnxEhsHEntryId specifies the index of an Event Entry in the EHS Event Handler indicated by the value of tmnxEhsHandlerName.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.1
tmnxEhsHEntryRowStatus The value of tmnxEhsHEntryRowStatus specifies the row status. It allows rows to be created and deleted in the tmnxEhsHEntryTable. If an associated row does not exist in the tmnxEhsHandlerTable, a attempt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.2
tmnxEhsHEntryDescription The value of tmnxEhsHEntryDescription specifies a user provided description string for EHS Event Handler Entry. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.3
tmnxEhsHEntryLastChange The value of tmnxEhsHEntryLastChange indicates the time this row was last changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.4
tmnxEhsHEntryAdminStatus The value of tmnxEhsHEntryAdminStatus specifies the administrative state of the EHS Event Handler Entry.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.5
tmnxEhsHEntryOperStatus The value of tmnxEhsHEntryOperStatus indicates the operational state of the EHS Event Handler Entry.	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.6
tmnxEhsHEntryScriptPlcyName The value of tmnxEhsHEntryScriptPlcyName in combination with the value of tmnxEhsHEntryScriptPlcyOwner specifies the script policy that can be launched from this tmnxEhsHEntryTable row. The zero-length string may be use…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.7
tmnxEhsHEntryScriptPlcyOwner The value of tmnxEhsHEntryScriptPlcyOwner in combination with the value of tmnxEhsHEntryScriptPlcyName specifies the script policy that can be launched from this tmnxEhsHEntryTable row. The zero-length string may be use…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.8
tmnxEhsHEntryMinDelay The value of tmnxEhsHEntryMinDelay specifies the minimum time, in seconds, between executions of the script policy specified by this EHS Event Handler Entry. A '0' value means no delay is imposed.	secondsUnsigned32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.9
tmnxEhsHEntryLastExecuted The value of tmnxEhsHEntryLastExecuted indicates the time when handler entry launch execution of action.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.29.4.1.10

The tmnxEhsHEntryStatsTable contains operational data for Event
Handler Entries used by an EHS Event Handler.

tmnxEhsHEntryStatsEntry row .1.3.6.1.4.1.6527.3.1.2.12.29.5.1

Defines a row entry in the tmnxEhsHEntryStatsTable. Each row contains
operational information about a specific EHS Event Handler Entry.

Rows are created and deleted by the system as rows are created and
del…

Indexes

No indexes recorded

Column	Syntax	OID
tmnxEhsHEntryStatsLaunchSuccess The value of tmnxEhsHEntryStatsLaunchSuccess indicates the number of successfully queued scripts by EHS handler entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.5.1.1
tmnxEhsHEntryStatsErrMinDelay The value of tmnxEhsHEntryStatsErrMinDelay indicates the number of cancelled script executions due to tmnxEhsHEntryMinDelay.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.5.1.2
tmnxEhsHEntryStatsErrLaunch The value of tmnxEhsHEntryStatsErrLaunch indicates the number of cancelled script executions due to launch failure.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.5.1.3
tmnxEhsHEntryStatsErrAdmStatus The value of tmnxEhsHEntryStatsErrAdmStatus indicates the number of cancelled script executions due to admin state of the handler entry. The handler entry may be out-of-service due to tmnxEhsHEntryAdminSt…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.12.29.5.1.4

The tmnxEhsTriggerTable contains a list of Event Triggers used by the
Event Handling System (EHS).

tmnxEhsTriggerEntry row .1.3.6.1.4.1.6527.3.1.2.12.29.6.1

Defines a row in the tmnxEhsTriggerTable. Each row
contains information about a specific Event Handling
system (EHS) Event Trigger.

Rows are created and deleted via SNMP SET operations using
tmnxEhsTrigger…

Indexes

tmnxEventAppIndex tmnxEventID

Column	Syntax	OID
tmnxEhsTriggerRowStatus The value of tmnxEhsTriggerRowStatus specifies the row status. It allows rows to be created and deleted in the tmnxEhsTriggerTable. If any associated rows exist in the tmnxEhsTEntryTable, 'destroy' will …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.12.29.6.1.1
tmnxEhsTriggerDescription The value of tmnxEhsTriggerDescription specifies a user provided description string for an EHS Event Trigger. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.12.29.6.1.2
tmnxEhsTriggerLastChange The value of tmnxEhsTriggerLastChange indicates the time this row was last changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.12.29.6.1.3
tmnxEhsTriggerAdminStatus The value of tmnxEhsTriggerAdminStatus specifies the administrative state of the EHS Event Trigger.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.12.29.6.1.4
tmnxEhsTriggerOperStatus The value of tmnxEhsTriggerOperStatus indicates the operational state of the EHS Event Trigger.	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.12.29.6.1.5