THERMOSTAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
14

ipv4TrapTable

table
.1.3.6.1.4.1.57702.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the nthermo variant from /opt/observium/mibs/nthermo.
Command help
Walk ipv4TrapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'THERMOSTAT-MIB' -M '/opt/observium/mibs/nthermo:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'THERMOSTAT-MIB::ipv4TrapTable' 
Trap table for IPv4 Destination address configuration
ipv4TrapEntry row .1.3.6.1.4.1.57702.1.2.1.1
Single trap entry containing trap receiver info.
Indexes
Column Syntax OID
ipv4TrapReceiverNumber
Index of trap receiver
Integer32
Constraints:
range: 0-4
 .1.3.6.1.4.1.57702.1.2.1.1.1
ipv4TrapEnabled
Indicates if this trap entry is enabled or not.
TrapEnabledTyper/w
Type Values:
0no
1yes
Description:
Enabled status for IPv4 traps
 .1.3.6.1.4.1.57702.1.2.1.1.2
ipv4TrapReceiverIPAddress
Trap receiver IP address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.57702.1.2.1.1.3
ipv4TrapCommunity
Trap community to be used by agent to send trap
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.57702.1.2.1.1.4

scheduleTable

table
.1.3.6.1.4.1.57702.1.3.120 · 1 row entry · 10 columns
Open in standard view
Uses the nthermo variant from /opt/observium/mibs/nthermo.
Command help
Walk scheduleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'THERMOSTAT-MIB' -M '/opt/observium/mibs/nthermo:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'THERMOSTAT-MIB::scheduleTable' 
Table of thermostat schedule entries.
scheduleEntry row .1.3.6.1.4.1.57702.1.3.120.1
An entry in the thermostat schedule table.
Indexes
Column Syntax OID
scheduleIndex
Index of the schedule accounting for weekday and period
ScheduleIndexType
Type Constraints:
range: 0..28
Description:
A combined index representing weekday and period.
Calculated as: (weekday * 4) + period
Where weekday is 0-6 (Monday-Sunday) and period is 0-3.
 .1.3.6.1.4.1.57702.1.3.120.1.1
scheduleWeekday
Day of the week from monday(1) though sunday(7)
ScheduleWeekdayType
Type Values:
1monday
2tuesday
3wednesday
4thursday
5friday
6saturday
7sunday
Description:
Day of the week from monday though sunday
 .1.3.6.1.4.1.57702.1.3.120.1.2
schedulePeriod
Period within the day, from 1 to 4
SchedulePeriodType
Type Values:
1morning
2day
3evening
4night
Description:
Period within each day, 1 through 4, typically
maps as morning(1), day(2), evening(3), and night(4),
but there is no restriction in how they are used.
 .1.3.6.1.4.1.57702.1.3.120.1.3
scheduleEnable
Indicates whether this schedule entry is enabled or disabled.
Note schedules will not run regardless if the thermostat is
in Manual Operation (see manualOperation).
EnabledTyper/w
Type Values:
1disabled
2enabled
Description:
Indicates whether something is enabled or not
 .1.3.6.1.4.1.57702.1.3.120.1.4
scheduleTime
The time of day for this schedule entry, in minutes since midnight.
minutesInteger32r/w
Constraints:
range: 0-1439
 .1.3.6.1.4.1.57702.1.3.120.1.5
scheduleCoolSetpoint
The cool temperature setpoint for this schedule entry. it must be at
least 2 F or 1 C higher than the heat setpoint counterpart
scheduleHeatSetpoint, and also within the allowed min max limits
hvacCoolSPLowLimit, and hv…
degreesInteger32r/w
Constraints:
range: 16-108
 .1.3.6.1.4.1.57702.1.3.120.1.6
scheduleHeatSetpoint
The heat temperature setpoint for this schedule entry. it must be at
least 2 F or 1 C lower than the cool setpoint counterpart
scheduleCoolSetpoint, and also within the allowed min max limits
hvacHeatSPLowLimit, and hva…
degreesInteger32r/w
Constraints:
range: 3-88
 .1.3.6.1.4.1.57702.1.3.120.1.7
scheduleOccupied
Whether to consider the space occupied or not when this particular
schedule entry is active.
OccupiedTyper/w
Type Values:
1unoccupied
2occupied
Description:
Indicates the occupancy state
 .1.3.6.1.4.1.57702.1.3.120.1.8
scheduleMode
The system mode to set active for this schedule entry. Only valid modes depending
on the HVAC configuration of the system will be allowed.
ModeTyper/w
Type Values:
1off
2cool
3heat
4auto
5emer
Description:
Thermostat system mode
 .1.3.6.1.4.1.57702.1.3.120.1.9
scheduleFan
Only auto and on values are supported for schedules, even on multi-speed
fan systems.
FanTyper/w
Type Values:
1auto
2on
3fan2
4fan3
5recirc
Description:
Fan operation mode, on and fan1 are the same, recirc is intermitent fan.
Not all modes are writable in all circumstances except for auto and on.
 .1.3.6.1.4.1.57702.1.3.120.1.10