Standard view Table view

THERMOSTAT-MIB

Monitored by Observium 
        X7 SNMP application
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Sensors Status
Explore Observium network monitoring
Source file
THERMOSTAT-MIB
Last revised
Identity
thermostatInfo
Base OID
1.3.6.1.4.1.57702.1
Imported Objects
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC DisplayString TEXTUAL-CONVENTION
Net-SNMP examples using the nthermo MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'THERMOSTAT-MIB' -M '/opt/observium/mibs/nthermo:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'THERMOSTAT-MIB::thermostatInfo'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'THERMOSTAT-MIB' -M '/opt/observium/mibs/nthermo:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'THERMOSTAT-MIB::thermostatInfo'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (146)
19 directly used by Observium
networkthermostat
.1.3.6.1.4.1.57702
thermostatInfo
.1.3.6.1.4.1.57702.1
traps
.1.3.6.1.4.1.57702.1.0
product
.1.3.6.1.4.1.57702.1.1
model
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.57702.1.1.1
version
FirmwareVersionType
 .1.3.6.1.4.1.57702.1.1.2
versionDate
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.57702.1.1.3
binVersion
FirmwareVersionType
 .1.3.6.1.4.1.57702.1.1.4
faceplateVersion
FirmwareVersionType
 .1.3.6.1.4.1.57702.1.1.5
setup
.1.3.6.1.4.1.57702.1.2
ipv4TrapTable
.1.3.6.1.4.1.57702.1.2.1
ipv4TrapEntry
ipv4TrapReceiverNumber
 .1.3.6.1.4.1.57702.1.2.1.1
ipv4TrapReceiverNumber
Integer32
 .1.3.6.1.4.1.57702.1.2.1.1.1
ipv4TrapEnabled r/w
TrapEnabledType
 .1.3.6.1.4.1.57702.1.2.1.1.2
ipv4TrapReceiverIPAddress r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.57702.1.2.1.1.3
ipv4TrapCommunity r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.57702.1.2.1.1.4
control
.1.3.6.1.4.1.57702.1.3
indoorTemp OBS ✓
degreesTempDoublePrecisionType
 .1.3.6.1.4.1.57702.1.3.1
manualUnoccupiedCoolSP r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.10
manualUnoccupiedHeatSP r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.11
occupancyToggle r/w
OccupiedType
 .1.3.6.1.4.1.57702.1.3.12
scheduleTable
.1.3.6.1.4.1.57702.1.3.120
scheduleEntry
scheduleIndex
 .1.3.6.1.4.1.57702.1.3.120.1
scheduleIndex
ScheduleIndexType
 .1.3.6.1.4.1.57702.1.3.120.1.1
scheduleFan r/w
FanType
 .1.3.6.1.4.1.57702.1.3.120.1.10
scheduleWeekday
ScheduleWeekdayType
 .1.3.6.1.4.1.57702.1.3.120.1.2
schedulePeriod
SchedulePeriodType
 .1.3.6.1.4.1.57702.1.3.120.1.3
scheduleEnable r/w
EnabledType
 .1.3.6.1.4.1.57702.1.3.120.1.4
scheduleTime r/w
minutesInteger32
 .1.3.6.1.4.1.57702.1.3.120.1.5
scheduleCoolSetpoint r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.120.1.6
scheduleHeatSetpoint r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.120.1.7
scheduleOccupied r/w
OccupiedType
 .1.3.6.1.4.1.57702.1.3.120.1.8
scheduleMode r/w
ModeType
 .1.3.6.1.4.1.57702.1.3.120.1.9
manualOperation r/w
ActiveType
 .1.3.6.1.4.1.57702.1.3.13
alertHighIndoorTemp r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.130
alertLowIndoorTemp r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.131
alertInefficientEquipmentRun r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.132
alertChangeFilter r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.133
alertHighOutdoorTemp r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.134
alertLowOutdoorTemp r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.135
alertHighHumidity r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.136
alertLowHumidity r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.137
alertAux1High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.138
alertAux1Low r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.139
coolHeatState
Enumeration
 .1.3.6.1.4.1.57702.1.3.14
alertAux2High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.140
alertAux2Low r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.141
alertAux3High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.142
alertAux3Low r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.143
alertInput1 r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.144
alertInput2 r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.145
alertChangeHumidityPad r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.146
alertUVLamp r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.147
alertFreshAirFilter r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.148
alertAux4High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.149
stagesActive
Integer32
 .1.3.6.1.4.1.57702.1.3.15
alertAux4Low r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.150
alertAux5High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.151
alertAux5Low r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.152
alertAux6High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.153
alertAux6Low r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.154
alertAux7High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.155
alertAux7Low r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.156
alertWaterLeak r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.157
alertCO2High r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.158
alertCO2Fail r/w
SNMPv2-SMICounter32
 .1.3.6.1.4.1.57702.1.3.159
overrideSystemMode r/w
ModeType
 .1.3.6.1.4.1.57702.1.3.16
alertAny r/w
YesNoType
 .1.3.6.1.4.1.57702.1.3.160
overrideFanMode r/w
FanSpeed
 .1.3.6.1.4.1.57702.1.3.17
overrideCoolSP r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.18
overrideHeatSP r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.19
indoorHum OBS ✓
percentInteger32
 .1.3.6.1.4.1.57702.1.3.2
overrideStatus r/w
ActiveType
 .1.3.6.1.4.1.57702.1.3.20
overrideTimeRemaining r/w
minutesInteger32
 .1.3.6.1.4.1.57702.1.3.21
snmpTempUnits r/w
TempUnitsType
 .1.3.6.1.4.1.57702.1.3.22
displayTempUnits r/w
TempUnitsType
 .1.3.6.1.4.1.57702.1.3.23
hvacTypeSetting r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.24
hvacCoolingStages r/w
Integer32
 .1.3.6.1.4.1.57702.1.3.25
hvacHeatingStages r/w
Integer32
 .1.3.6.1.4.1.57702.1.3.26
hvacHeatType r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.27
hvacMinOnTime r/w
minutesInteger32
 .1.3.6.1.4.1.57702.1.3.28
hvacMinOffTime r/w
minutesInteger32
 .1.3.6.1.4.1.57702.1.3.29
systemMode OBS ✓ r/w
ModeType
 .1.3.6.1.4.1.57702.1.3.3
hvacEmerHeatEnable r/w
EnabledType
 .1.3.6.1.4.1.57702.1.3.30
hvacDualFuel r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.31
hvacAdaptiveRecovery r/w
EnabledType
 .1.3.6.1.4.1.57702.1.3.32
hvacRemoteIndoorAvg r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.33
hvacFanPurgeTime r/w
secondsInteger32
 .1.3.6.1.4.1.57702.1.3.34
hvacLockScreen r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.35
hvacLockCode r/w
LockCodeType
 .1.3.6.1.4.1.57702.1.3.36
hvacStage1Diff r/w
degreesStageDeltaType
 .1.3.6.1.4.1.57702.1.3.37
hvacStage2Diff r/w
degreesStageDeltaType
 .1.3.6.1.4.1.57702.1.3.38
hvacStage2Delay r/w
minutesInteger32
 .1.3.6.1.4.1.57702.1.3.39
fanMode r/w
FanSpeed
 .1.3.6.1.4.1.57702.1.3.4
hvacAuxHeatDelay r/w
minutesInteger32
 .1.3.6.1.4.1.57702.1.3.40
hvacTempOverrideRange r/w
degreesOverrideRangeType
 .1.3.6.1.4.1.57702.1.3.41
hvacOverrideTime r/w
minutesInteger32
 .1.3.6.1.4.1.57702.1.3.42
hvacTempCalibration r/w
degreesTempCalibrationType
 .1.3.6.1.4.1.57702.1.3.43
hvacBalancePointHigh r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.44
hvacBalancePointLow r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.45
hvacCoolSPHighLimit r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.46
hvacCoolSPLowLimit r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.47
hvacHeatSPHighLimit r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.48
hvacHeatSPLowLimit r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.49
activeCoolSetpoint r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.5
hvacFanSpeeds r/w
Integer32
 .1.3.6.1.4.1.57702.1.3.50
ntpEnable r/w
EnabledType
 .1.3.6.1.4.1.57702.1.3.51
ntpServer r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.57702.1.3.52
digitalInput1
ActiveType
 .1.3.6.1.4.1.57702.1.3.53
digitalInput2
ActiveType
 .1.3.6.1.4.1.57702.1.3.54
occupancyInput
Enumeration
 .1.3.6.1.4.1.57702.1.3.55
outdoorTemp OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.56
outdoorHum OBS ✓
percentInteger32
 .1.3.6.1.4.1.57702.1.3.57
remoteIndoorTemp OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.58
remoteOutdoorTemp OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.59
activeHeatSetpoint r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.6
remoteIndoorHum OBS ✓
percentInteger32
 .1.3.6.1.4.1.57702.1.3.60
remoteAux1 OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.61
remoteAux2 OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.62
remoteAux3 OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.63
remoteAux4 OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.64
remoteAux5 OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.65
remoteAux6 OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.66
remoteAux7 OBS ✓
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.67
remoteWaterLeak OBS ✓
TrippedType
 .1.3.6.1.4.1.57702.1.3.68
remoteDoorWindow OBS ✓
TrippedType
 .1.3.6.1.4.1.57702.1.3.69
activeSetpoint
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.7
remoteOccupancy
OccupiedType
 .1.3.6.1.4.1.57702.1.3.70
co2SensorValue OBS ✓
ppmInteger32
 .1.3.6.1.4.1.57702.1.3.71
co2SensorMax r/w
ppmInteger32
 .1.3.6.1.4.1.57702.1.3.72
co2HighLimit r/w
ppmInteger32
 .1.3.6.1.4.1.57702.1.3.73
co2HighLevelDetected OBS ✓
ActiveType
 .1.3.6.1.4.1.57702.1.3.74
co2MaxResetSetting r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.75
co2DisplaySetting r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.76
recircFanTimer r/w
minutes per hourInteger32
 .1.3.6.1.4.1.57702.1.3.77
basOutdoorTemp r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.78
basOutdoorHum r/w
percentInteger32
 .1.3.6.1.4.1.57702.1.3.79
manualOccupiedCoolSP r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.8
khdRelayOperation r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.80
k2RelayOperation r/w
Enumeration
 .1.3.6.1.4.1.57702.1.3.81
khdManualOperation r/w
OnOffType
 .1.3.6.1.4.1.57702.1.3.82
k2ManualOperation r/w
OnOffType
 .1.3.6.1.4.1.57702.1.3.83
manualOccupiedHeatSP r/w
degreesInteger32
 .1.3.6.1.4.1.57702.1.3.9
netxMIBConformance
.1.3.6.1.4.1.57702.1.8
netxMIBCompliances
.1.3.6.1.4.1.57702.1.8.1
netxMIBGroups
.1.3.6.1.4.1.57702.1.8.2
Dependencies (3) 3 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. THERMOSTAT-MIBnthermoselected
Type Definitions (20)
ActiveType
Enumeration
inactive(1)
active(2)
Indicates whether something is active or not
EnabledType
Enumeration
disabled(1)
enabled(2)
Indicates whether something is enabled or not
FanSpeed
Enumeration
auto(1)
fan1(2)
fan2(3)
fan3(4)
Current fan speed setting, modes are available depending on the HVAC settings.
Not all speeds may be writable in all circumstances, except for auto and fan1.
FanType
Enumeration
auto(1)
on(2)
fan2(3)
fan3(4)
recirc(5)
Fan operation mode, on and fan1 are the same, recirc is intermitent fan.
Not all modes are writable in all circumstances except for auto and on.
FirmwareVersionType
Integer32 range: 0..9999
Display format: d-2
Firmware version as major.minor
LockCodeType
OctetString range: 4
Display format: 4d
Physical display lock code
ModeType
Enumeration
off(1)
cool(2)
heat(3)
auto(4)
emer(5)
Thermostat system mode
OccupiedType
Enumeration
unoccupied(1)
occupied(2)
Indicates the occupancy state
OnOffType
Enumeration
off(1)
on(2)
Indicates whether something is on or not
OverrideRangeType
Integer32 range: 10..80
Display format: d-1
Temperature range for overrides with a locked display
ScheduleIndexType
Integer32 range: 0..28
Display format: d
A combined index representing weekday and period.
Calculated as: (weekday * 4) + period
Where weekday is 0-6 (Monday-Sunday) and period is 0-3.
SchedulePeriodType
Enumeration
morning(1)
day(2)
evening(3)
night(4)
Period within each day, 1 through 4, typically
maps as morning(1), day(2), evening(3), and night(4),
but there is no restriction in how they are used.
ScheduleWeekdayType
Enumeration
monday(1)
tuesday(2)
wednesday(3)
thursday(4)
friday(5)
saturday(6)
sunday(7)
Day of the week from monday though sunday
StageDeltaType
Integer32 range: 5..60
Display format: d-1
Temperature delta with 0.5 C or 1.0 F degree precision, in 0.5 C or 1 F increments.
TempCalibrationType
Integer32 range: -600..600
Display format: d-2
Temperature calibration offset between -3 and 3 C or -6 to 6 F
TempDoublePrecisionType
Integer32 range: -5400..12400
Display format: d-2
Temperature with 0.01 degree precision
TempUnitsType
Enumeration
fahrenheit(1)
celsius(2)
Temperature units
TrapEnabledType
Enumeration
no(0)
yes(1)
Enabled status for IPv4 traps
TrippedType
Enumeration
untripped(1)
tripped(2)
Indicates whether a binary style sensor is tripped or not
YesNoType
Enumeration
no(1)
yes(2)
Indicates a yes or no status
Conformance Groups (4)
netxProductGroup
model version versionDate binVersion faceplateVersion
A collection of objects providing setup for traps
 .1.3.6.1.4.1.57702.1.8.2.1
netxSetupGroup
ipv4TrapEnabled ipv4TrapReceiverIPAddress ipv4TrapCommunity
A collection of objects providing setup for traps
 .1.3.6.1.4.1.57702.1.8.2.2
netxControlGroup
indoorTemp indoorHum systemMode fanMode manualOccupiedCoolSP manualOccupiedHeatSP manualUnoccupiedCoolSP manualUnoccupiedHeatSP occupancyToggle manualOperation coolHeatState stagesActive overrideSystemMode overrideFanMode overrideCoolSP overrideHeatSP overrideStatus overrideTimeRemaining snmpTempUnits displayTempUnits hvacTypeSetting hvacCoolingStages hvacHeatingStages hvacHeatType hvacMinOnTime hvacMinOffTime hvacEmerHeatEnable hvacDualFuel hvacAdaptiveRecovery hvacRemoteIndoorAvg hvacFanPurgeTime hvacLockScreen hvacLockCode hvacStage1Diff hvacStage2Diff hvacStage2Delay hvacAuxHeatDelay hvacTempOverrideRange hvacOverrideTime hvacTempCalibration hvacBalancePointHigh hvacBalancePointLow hvacCoolSPHighLimit hvacCoolSPLowLimit hvacHeatSPHighLimit hvacHeatSPLowLimit hvacFanSpeeds ntpEnable ntpServer digitalInput1 digitalInput2 occupancyInput outdoorTemp outdoorHum remoteIndoorTemp remoteOutdoorTemp remoteIndoorHum remoteAux1 remoteAux2 remoteAux3 remoteAux4 remoteAux5 remoteAux6 remoteAux7 remoteWaterLeak remoteDoorWindow remoteOccupancy co2SensorValue co2SensorMax co2HighLimit co2HighLevelDetected co2MaxResetSetting co2DisplaySetting activeCoolSetpoint activeHeatSetpoint activeSetpoint recircFanTimer basOutdoorTemp basOutdoorHum khdRelayOperation k2RelayOperation khdManualOperation k2ManualOperation scheduleWeekday schedulePeriod scheduleEnable scheduleTime scheduleCoolSetpoint scheduleHeatSetpoint scheduleOccupied scheduleMode scheduleFan alertHighIndoorTemp alertLowIndoorTemp alertInefficientEquipmentRun alertChangeFilter alertHighOutdoorTemp alertLowOutdoorTemp alertHighHumidity alertLowHumidity alertAux1High alertAux1Low alertAux2High alertAux2Low alertAux3High alertAux3Low alertInput1 alertInput2 alertChangeHumidityPad alertUVLamp alertFreshAirFilter alertAux4High alertAux4Low alertAux5High alertAux5Low alertAux6High alertAux6Low alertAux7High alertAux7Low alertWaterLeak alertCO2High alertCO2Fail alertAny
A collection of objects providing control of the thermostat
 .1.3.6.1.4.1.57702.1.8.2.3
netxTrapsGroup
statusTrap alertsTrap
A collection of objects providing setup for traps
 .1.3.6.1.4.1.57702.1.8.2.4
Compliance Statements (1)

OID .1.3.6.1.4.1.57702.1.8.1.1
Group for NetX SNMP
Required groups
mandatory netxProductGroup
mandatory netxSetupGroup
mandatory netxControlGroup
mandatory netxTrapsGroup
Notifications / Traps (2)
NameOIDDescription
statusTrap
indoorTemp coolHeatState stagesActive activeSetpoint
.1.3.6.1.4.1.57702.1.0.1
HVAC status trap notification, any change in coolHeatState, stagesActive,
or activeSetpoint, will trigger the trap. Changes in indoorTemp will
trigger the trap only if a change larger than the delta configured in the
BAS configuration page is met, or if said delta is set to zero, changes
in indoorTemp will not trigger this trap.
alertsTrap
alertHighIndoorTemp alertLowIndoorTemp alertInefficientEquipmentRun alertChangeFilter alertHighOutdoorTemp alertLowOutdoorTemp alertHighHumidity alertLowHumidity alertAux1High alertAux1Low alertAux2High alertAux2Low alertAux3High alertAux3Low alertInput1 alertInput2 alertChangeHumidityPad alertUVLamp alertFreshAirFilter alertAux4High alertAux4Low alertAux5High alertAux5Low alertAux6High alertAux6Low alertAux7High alertAux7Low alertWaterLeak alertCO2High alertCO2Fail
.1.3.6.1.4.1.57702.1.0.2
Alerts trap notification, any change in any of the alert objects, as long
as setup to send a trap in the alert settings page, will trigger the trap
containing the status for that alert object. Only one object will be sent
in each trap message. If the alert that triggers the trap is configured
in the alert settings page to send periodical messages until cleared, the
alert will continue to send the trap until cleared from the page, or a 0
is written via SNMP to the specific alert object or to the alertAny
object which clears all alerts at once.